丝素膜上药物渗透量对溶液PH值的响应

蚕丝丝素蛋白膜是一种具有弱碱性和弱酸性的两性荷电膜。因此在丝素膜－水溶液体系中，水溶液ｐＨ值变化会影响丝素膜上溶质的渗透速度和渗透量。丝素膜的等电点ｐＨ≈４．５。丝素膜上药物渗透实验的结果表明：在ｐＨ＝３．０～９．０的范围内，当溶液的ｐＨ＜４．５时，丝素膜带正电，正离子苄三甲氯化铵的渗透系数下降；当溶液的ｐＨ＞４．５时，丝素膜带负电，负离子酚磺酸钠的渗透系数明显下降。中性分子间苯二酚在丝素膜上的透过不受外部溶液ｐＨ值变化的影响。当溶液的ｐＨ＞８或ｐＨ＞４．５时，离子化的药物５－氟尿嘧啶或维生素Ｃ的渗透系数明显变小，这是因为两者分别在ｐＨ＝８（ｐＫａ＝８．０）和ｐＨ＝４．５（ｐＫａ＝４．２５）以上变成带电离子。这表明离子化药物在蚕丝丝素膜上的渗透速度和渗透量对溶液ｐＨ值变化有较好的响应特性。     

成膜溶剂对聚4-甲基戊烯-1膜的形态结构和透过行为的影响——Ⅰ.膜的结晶性质与表面形态

以聚4－甲基戊烯－1（PMP）为膜材质，分别以环己烷、三氯乙烯、四氯乙烯、环己烷／三氯乙烯及环己烷／四氯乙烯为溶,他这些溶液浇铸膜垢结晶性质和表面形态。结果表明，溶剂对PMP的相对溶解能力和挥发速度同所成膜内PMP的结晶形式和结晶度密切相关；不同溶剂体系的PMP溶液浇铸膜的表面形态也不尽相同。并发现以四氯乙烯（或三氯乙烯）为溶剂或溶剂组分之一的PMP溶液浇铸膜存在未见报道的Ⅵ型结晶。     

成膜溶剂对聚4-甲基戊烯-1膜形态结构及渗透汽化特性的影响

以聚4－甲基戊烯－1（PMP）为膜材质、分别以环己烷、三氯乙烯以及环己烷／三氯乙烯为溶剂，以浇铸法制备了PMP的均质致密膜。研究了不同溶剂体系的相对溶解能力和挥发速度对PMP膜结晶度和形态结构的影响，并对成膜的渗透汽化特性的影响进行了研究。     

壳聚糖膜的处理方法与其渗透汽化性能间的关系

对壳聚糖均质膜折脱酸处理、干燥方法与所得膜的渗透汽化性能间的关系进行了研究。结果表明，处理方法的不同直接影响到膜的透过、分离性能。用含３ｗｔ．％ＮａＯＨ的醇水溶液（乙醇／水＝５０／５０（ｗｔ．／ｗｔ．））进行脱酸处理的膜，其α水／乙醇值，在料液温度为５５－７５℃的范围内几乎不变。     

两种荧光LB膜的制备和光谱性能

制取了４－二氰基亚甲基－２－甲基－６－对二甲胺基苯乙烯基－４Ｈ－吡喃（ＤＣＭ）和１，２－双（５－甲基苯并恶唑）基乙烯（ＤＴ）两种荧光分子的ＬＢ膜以及两者的混合膜，以吸收光谱和荧光光谱探讨了膜中分子的构型，微环境，发光性能等特征，发现在ＬＢ膜的缀密排布环境中ＤＣＭ顺式构型的含量较之在溶液中大为增加。     

成膜溶剂对聚4-甲基戊烯-1膜的形态结构和透过行为的影响——Ⅱ.膜的气体透过行为

以聚4－甲基戊烯－1（PMP）为膜材质，分别以环己烷、三氯乙烯、四氯乙烯及环己烷／三氯乙烯为溶剂，研究了这些溶液浇铸膜对O2、N2、H2及CO2等气体的透过行为。结果表明，气体的透过主要发生在PMP的无定形区域，但也在PMP的晶区进行。PMP的Ⅵ型结晶比Ⅰ型结晶具有较低的氧化透过活化能。     

活化高分子膜免疫电极检测乳腺癌抗原

报道了一种灵敏度高和使用简便的免疫电极,用于测定乳腺癌抗原（CA15－3）。CA15－3抗体固定在用羟胺活化的聚氯乙烯（PVC）－牛血清白蛋白（BSA）基体膜上。当抗体膜与CA15－3血清结合形成抗原体复合物膜后,将该复合物膜固定在自制Ag-AgCI基体电极顶端,利用毫伏计测定膜电位。该法可在15－240U／mL范围测定CA15－3,线性关系良好,回归方程：△E=-8、84 13、97Ig[CA15-3],相关系数0．9998。人血清中其他常见抗原对CA15－3测定基本无干扰。同时,探讨了免疫膜的电位响应机理。     

硫酸溶液中铅阳极膜研究的几个问题（二）

硫酸溶液中铅阳极膜研究的几个问题（二）①柳厚田＊王群洲万咏勤周伟舫（复旦大学化学系，上海２００４３３）蔡文斌（厦门大学化学系，厦门３６１００５）在硫酸溶液中开始生长阳极Ｐｂ（Ⅱ）膜后不久，表面即形成ＰｂＳＯ４半透膜，该膜仅Ｈ＋、ＯＨ－和Ｈ２Ｏ可通过，...     

丝素蛋白膜上5-氟尿嘧啶的包埋及其释放

讨论了包埋在丝素膜中的５－氟脲嘧啶（５－ＦＵ）的固定状况,在不同ＰＨ值下测定了丝素５－ＦＵ复合膜中药物的释放,实验结果表明：５－ＦＵ均匀地被包埋在丝素膜中,即丝素膜可以作为５－ＦＵ载体,经过比涂层保护,丝素５－ＦＵ复合膜中的５－ＦＵ溶解释放速率变慢,释放时间延长;经涂层的 素５－ＦＵ复合膜在接近丝素蛋白等电点（ＰＨ＝４．５）时,５－ＦＵ在溶液中释放速度较慢,释放时间较长,表明用调节外部溶液ＰＨ值的     

以双核有机锡化合物为载体的PVC膜磷酸根离子敏感电极

以双（三苄基锡）氧化物为载体制备了一种对磷酸氢根离子具有良好电位响应性能的溶剂聚合膜离子敏感电极。在ｐＨ为７．２０±０．０２的测试液中，电极的线性响应范围为５ ×１０＾－６￣１０＾－１ｍｏｌ／Ｌ，斜率为－３０．１ｍＶ／ｄｅｃ．．用分别溶液法测得其对于各种阴离子的选择性次序：ＨＰＯ４＾２－￣Ｉ＾－〉Ｂｒ＾－〉Ｃｌ＾－〉Ａｃ〉ＳＯ４＾２－。膜相中荷电离子添加实验的结果表明，电极响应系中性载体作用机制。     

(ClAlNH)n簇合物的结构与稳定性

用量子化学从头算方法（HF／6－31G）和密度泛函理论（DFT）的B3LYP方法，以6－31G标准基组加一个极化函数，对（ClAlNH)n(n=1-10)簇合物的几何构型，电子结构和红外光谱进行了优化，并讨论了聚合反应（ClAlNH)m→(ClAlNH)n的热力学效应，结果表明，（ClAlNH)n系列簇合物的基态稳定结构为Cs(n=1),D2h(n=2),D3h(n=3),Td(n=4),Cs(n=5),D3d(n=6),Cs(n=7),S4(n=8),D3h(n=9),C2h(n=10,n=2,4,6,8,10等偶数对应的（ClAlNH)n簇化合物的结构比n等于奇数量更稳定。     

Deficiencies of the ferricinium-ferrocene redox couple for estimating transfer energies of single ions

The difference between the partial molal entropies of ferrocene and ferricinium has been determined in nine solvents from the temperature dependence of the formal potential of the ferricinium-ferrocene redox couple using a nonisothermal electrochemical cell arrangement in order to probe possible structural reasons for the limitations of the ferrocene assumption for estimating the transfer thermodynamics of single ions between different solvents. In contrast to the uniformly small positive values of predicted by the Born model, the experimental quantities varied widely from small or even negative values in hydrogen-bonded solvents (–5 to 3 e.u.) to substantially larger values (11–14 e.u.) in dipolar aprotic media. These variations appear to arise chiefly from additional solvent ordering in the vicinity of the ferricinium cation compared to the ferrocene molecule which is enhanced in the aprotic solvents. The variations in between water and a number of nonaqueous solvents provide a predominate contribution to the differences between the free energies of single ion transfer calculated using the ferrocene and alternative extrathermodynamic assumptions.     

双金属引发体系苯乙烯活性聚合活性种的交互缔合动力学

自从发现烷氧基钾(ＲＯＫ)/烷基锂(ＲＬｉ)双金属引发体系对丁二烯苯乙烯阴离子共聚具有高效竟聚率调节作用以来[1],相关的机理研究一直十分活跃[2～6].在这类双金属引发体系中,由于含有Ｋ、Ｌｉ两种反离子,因此可能存在钾活性种(ＰＫ)和锂活性种(ＰＬｉ)的交互缔合体.但迄今有关不同反离子活性种形成交互缔合体的研究报道较少.本工作利用2甲基2己醇钾对苯乙烯均聚反应速度具有较大影响这一特性,对低Ｋ/Ｌｉ情况下可溶性醇钾/ｎＢｕＬｉ双金属引发体系苯乙烯均聚动力学进行了研究.建立了以交互缔合体为基础的反应动力学模型.求得了ＰＫ的增…     

含磷全芳族热致液晶共聚酯的合成及热性能

全芳族热致液晶聚酯因其优良的力学性能、热稳定性及较低的熔融粘度而倍受关注 ,是当今最有前途的特种高分子材料之一 .但是 ,全芳族聚酯的刚性结构使其熔点较高 ,难以加工 ,因而通过分子设计制备熔点较低的热致全芳香族聚酯液晶成为研究的热点 .在主链型热致液晶高分子的分子设计中 ,通常采用共聚或在高分子链中引入取代基、柔性链段、扭结成分等方法来达到降低聚合物相转变温度的目的[1～ 6 ] .本文以对羟基苯甲酸、对苯二甲酸、间苯二甲酸和含磷二元酚化合物为单体 ,合成了一类具有较低熔点或流动温度的新型全芳族热致共聚酯液晶 ,其分子…     

非晶聚对苯二甲酸乙二酯的制备与表征

采用引入U-polymer的路线制备了非晶聚对苯二甲酸乙二酯(APET).用DSC和DMA等手段研究了APET的性能.结果表明,经改性后得到的APET无结晶,透明性得到改善,玻璃化转变温度和储能模量都较PET有一定程度提高.     

Harmonic oscillator tensors. III: Efficient algorithms for evaluating matrix elements of vibrational operators

Succinct expressions for the matrix elements of various vibrational operators have been derived in the basis of the nondegenerate harmonic oscillator. Among these are the matrix elements of and , which are found to be dependent upon two quantities and their derivatives. Furthermore, the derivative property of the commutator is used to obtain an explicit expression for the derivatives of an operator in terms of its nested commutator with the conjugate momentum. It may be applied to any of the above cases to obtain the matrix representatives of expressions such as the mixed products , for example. In addition, a simple expression for 1/q is given and its derivatives may be evaluated by this commutator technique. Also the matrix elements of a Gaussian-type operator has been evaluated. This revised version was published online in July 2006 with corrections to the Cover Date.     

Transport property of polyaniline and its molecular weight dependence

Ｔｈｅｅｌｅｃｔｒｉｃａｌｃｏｎｄｕｃｔｉｖｉｔｙ(σ)ｏｆｐｏｌｙａｎｉｌｉｎｅ(ＰＡｎ)ｄｏｐｅｄｗｉｔｈｉｎｏｒｇａｎｉｃｐｒｏｔｏｎｉｃａｃｉｄｓｉｓａｂｏｕｔ10Ｓ/ｃｍａｎｄσ(Ｔ)∝ｅｘｐ[-(Ｔ0/Ｔ)1/2].Ｉｔｍｅａｎｓｔｈａｔσｉｎｃｒｅａｓｅｓｗｉｔｈｉｎｃｒｅａｓｉｎｇｔｅｍｐｅｒａｔｕｒｅａｎｄｔｈｅｔｒａｎｓｐｏｒｔｐｒｏｐｅｒｔｙｉｓｉｎａｃｃｏｒｄａｎｃｅｗｉｔｈｔｈｅｖａｒｉａｂｌｅｒａｎｇｅｈｏｐｐｉｎｇ(ＶＲＨ)ｍｏｄｅｌ[1].Ａｆｔｅｒｓｔｒｅｔｃｈｉｎｇ,ｔｈｅＨＣｌｄｏｐ…     

Solvent sorption measurements in polymeric membranes with ATR-IR spectroscopy

Long-term stability and performance of polymeric membranes in solvent and mixed solvent media can be reduced due to sorption and swelling of the membrane matrix. For this reason quantification of sorption and swelling is of major importance for the development of future applications of membrane processes in solvent and mixed solvent media. In this work a method is discussed, based on attenuated total reflectance infrared spectroscopy (ATR-IR), to establish sorption and sorption selectivity of a cellulose acetate (CA) membrane in water/methanol and water/ethanol mixtures. By analysis of specific peaks from the ATR-IR spectra of the solvents, the preferential sorption of water in CA membranes can be quantified. In the presence of methanol, the selectivity for water ranges from 2.5 to 3.5 between 52 and 90% of methanol. For ethanol, the selectivity for water ranges from about 1 (30% ethanol) to 2 (90% ethanol). From the work it follows that ATR-IR provides an easy and non-destructive method to study the sorption behavior of the polymeric membrane separation layer.     

Preparation of water and alkali durable porous glass membrane coated on porous alumina tubing by sol-gel method

Composite porous glass membranes were prepared by the sol-gel method. A thin porous glass layer, about 2 μm thick, was coated on the surface of the porous ceramic tubing (Al₂O₃:99.9 wt.%, pore diameter: 200 nm). The composition of the porous glass layer of the composite membrane was SiO₂-ZrO₂. Considering from the fact that the desalination ratio of the feed aqueous NaCl solution (NaCl 0.5 wt.%) was about 90% by use of these membranes, they were defect-free. The best composition of the porous glass layer was 70 SiO₂-30 ZrO₂ from the standpoint of preparing membranes. These membranes had a large water and alkali durability. These membranes can be expected to apply to recovering dyes and paints from organic solvents and to be used as a gas separation membrane.     

Ca改性钛酸铅纳米晶的制备及结构研究

用溶胶-凝胶工艺制备了Pb_1-xCa_xTiO₃(0≤x≤0.3)纳米晶,在不同焙烧条件下研究其粉体晶相结构的变化.研究结果表明,升温速度和焙烧温度对纳米粉的晶相、晶胞参数和晶粒尺寸有显著影响.讨论了晶胞参数、四方畸变度和晶胞体积与Ca含量的关系.