Representation of Electrical Conductances for Polyvalent Electrolytes by the Quint-Viallard Conductivity Equation. Universal Curves of Limiting Conductances and Walden Products of Electrolytes in Mixed Solvents. Part 5. Symmetrical 2:2, 3:3 and Unsymmetrical 1:2, 2:1 and 1:3 Type Electrolytes

Conductivities of symmetrical and unsymmetrical electrolytes of 2:2, 3:3, 1:2, 2:1 and 1:3 types in ethanol–water and the 1,4-dioxane–water mixtures were analyzed using the Quint-Viallard conductivity equation and taking into account the ion association effect. The molar limiting conductances and the ion association constants were reexamined for various multivalent electrolytes. One non-aqueous system, methanol–ethylene glycol mixtures, was also considered. The limiting conductances were also examined in the framework of universal curves of limiting conductances and the excess Walden products introduced by the author. These new concepts in the analysis of conductance data allow the estimation of values of limiting conductances of electrolytes or ions, to give an indication about the quality of the conductivity measurements and the type of interactions expected in the systems. It was found that for any type of electrolyte only one universal curve of limiting conductances exists. In the water-rich mixtures, attractive interactions (structure-making effects) are expected when electrolytes are added to mixtures with ethanol or with 1,4-dioxane. In contrast, in ethylene glycol–methanol-rich mixtures repulsive interactions (structure-breaking effects) are more likely.     

Rheological behaviour of polymer systems in the vicinity of critical regions

Flow induced phase separation in polymer solutions can be considered taking into account that mechanical motion proceeds in Minkowski space‐time. The spinodal temperature shift increasing with increase of the shear rate is interpreted as a result of relativistic effects. Relativistic phenomena can play the important role in processes of flow, especially when velocity of kinetic units on microscopic or mesoscopic level approaches some limiting velocity. The role of the value of limiting velocity in manifestation of relativistic effects was considered and changes of properties of polymers were discussed.     

Electronic structure and transport in disordered organic systems

The strongly-bound approximation is used to examine the effects of disorder on the electron energy spectrum. It is assumed that the exchange integrals in the nearest-neighbor approximation are random functions. The limiting cases of slight and pronounced disorder are discussed with allowance for correlation. The effects of some particular types of correlation are examined as regards type of spectrum and band broadening. It is found that the spectrum splits into two branches in the limiting case of extensive disorder. An expression for the electrical conductivity is derived for the case of slight disorder.     

Effects of circulation and facilitated electromigration of amino acids in electrodialysis with ion-exchange membranes

Dependences of fluxes of the mass of amino acids and mineral ions on the density of a direct electrical current in an electrodialysis process are obtained experimentally. Mutual influence of components on transport at low strengths of the electric field in membranes is discussed. Effects of circulation and facilitated electromigration of amino acids are considered. At a small excess of the limiting current density, the effects lead to a decrease in fluxes of amino acids through membranes. At a large excess of the limiting current, the effects result in an intensive conjugated transport of bipolar ions with the medium ions through membranes.     

Studies of third-order optical nonlinearities and optical limiting properties of azo dyes

In order to protect optical sensors and human eyes from debilitating laser effects, the intensity of the incoming laser light has to be opportunely reduced. Here, we report our results on the third-order optical nonlinearity and optical limiting properties of three azo dyes exposed to a 532nm continuous wave laser. We have observed low power optical limiting based on nonlinear refraction in our samples.     

Thermodynamic interrelation between excess limiting partial molar characteristics of a liquid nonelectrolyte

On the basis of thermodynamic analysis, it is concluded that the excess limiting partial molar volume, like the excess limiting partial molar enthalpy, can be considered as a solvation-related characteristic of a liquid nonelectrolyte. A thermodynamically grounded interrelation between standard volumetric and enthalpic effects of solution of a liquid nonelectrolyte (or series of nonelectrolytes) is suggested.     

One‐Step Synthesis of Graphitic Nanoplatelets that are Decorated with Luminescent Carbon Nanoparticles as New Optical‐Limiting Materials

Graphitic nanoplatelets (GNPs) and luminescent carbon nanoparticles (CNPs) are simultaneously synthesized by controlling the laser parameters and the size of the graphite flakes. Because luminescent CNPs are attached onto GNPs, a new carbon nanostructure is obtained. Compared with carbon black, GNPs, and luminescent CNPs alone, this nanostructure shows better optical‐limiting (OL) effects. The OL mechanism of GNPs that are decorated with luminescent CNPs can mainly be attributed to nonlinear scattering. The role of luminescent CNPs is to promote the formation and growth of nonlinear scattering bubbles, thereby enhancing their optical‐limiting effects.     

Nonlinear optical limiters of pulsed laser radiation based on carbon‐containing nanostructures in viscous and solid matrices

Results of the study of optical limiters of pulsed laser radiation based on nonlinear effects in carbon nanostructures placed into viscous and solid matrices are presented. A nonlinear optical limiting was studied by nanomaterials based on multi‐wall polyhedral carbon nanostructures (astralens) placed in a sol–gel matrix. Similar studies for single‐wall and multi‐wall carbon‐containing nanotubes placed in polymer matrices with various viscosities were performed. No additional mechanism of optical limiting due to electron structure of single‐wall carbon‐containing nanotubes at their introduction into viscous and solid composite media was found. An influence of polymer matrix composition containing carbon nanotubes (CNTs) on a threshold and ratio of attenuation of laser radiation was demonstrated. The best limiting characteristics were observed at placing CNT into polymethylsiloxane matrix. An effect of “self‐healing” of a medium after laser radiation passage through high viscous liquids was obtained. The high parameters of nonlinear optical limiting (the threshold of limiting 10^?5 J, ratio of attenuation 10³) achieved for the composite material CNT (HiPCO High‐Pressure Carbon Monoxide) and carbon nanofibers in high viscous and solid polymethylsiloxane media allow the design of protective filters for laser radiation operating in wide spectral range. Copyright © 2014 John Wiley & Sons, Ltd.     

Apparent Molar Volume and Apparent Molar Expansibility of Rubidium, Cesium, and Ammonium Cyclohexylsulfamate in Aqueous Solution

The apparent molar volume of rubidium, caesium, and ammonium cyclohexylsulfamate was determined from the density data of their aqueous solutions at 293.15, 298.15, 303.15, 313.15, 323.15, and 333.15 K. From the apparent molar volume, determined at various temperatures, the apparent molar expansibility was calculated. The limiting apparent molar volume and apparent molar expansibility were evaluated and apportioned into their ionic components. The limiting partial molar ionic volumes and expansibilities are discussed in terms of the various effects of the ion in solution on the structure of water. It was shown that the limiting partial molar ionic expansibilities of the alkali-metal cations increase with their ionic radii. The coefficients of thermal expansion of the investigated solutions at 298.15 K were calculated and are presented graphically together with some alkali-metal cyclohexylsulfamates and tetramethylammonium cyclohexylsulfamate. The densities of the investigated solutions can be adequately represented by an equation derived by Redlich.     

Apparent Molar Volume and Apparent Molar Expansibility of Rubidium, Cesium, and Ammonium Cyclohexylsulfamate in Aqueous Solution

Summary. The apparent molar volume of rubidium, caesium, and ammonium cyclohexylsulfamate was determined from the density data of their aqueous solutions at 293.15, 298.15, 303.15, 313.15, 323.15, and 333.15 K. From the apparent molar volume, determined at various temperatures, the apparent molar expansibility was calculated. The limiting apparent molar volume and apparent molar expansibility were evaluated and apportioned into their ionic components. The limiting partial molar ionic volumes and expansibilities are discussed in terms of the various effects of the ion in solution on the structure of water. It was shown that the limiting partial molar ionic expansibilities of the alkali-metal cations increase with their ionic radii. The coefficients of thermal expansion of the investigated solutions at 298.15 K were calculated and are presented graphically together with some alkali-metal cyclohexylsulfamates and tetramethylammonium cyclohexylsulfamate. The densities of the investigated solutions can be adequately represented by an equation derived by Redlich.     

Kinetic isotope effects in the active site of B. subtilis chorismate mutase

Kinetic isotope effects are determined for the enzyme‐catalyzed Claisen rearrangement of chorismate to prephenate using computational methods. The calculated kinetic isotope effects (KIEs) compare reasonably with the few available experimental values with both the theory and experiment obtaining a large KIE for the ether oxygen, indicating large polarization of the transition‐state geometry. Because there is a question of the extent that the experimental rate constants are for chemistry as the rate‐limiting step, the KIEs for all the atoms of the substrate are reported with the exception of the carboxylate groups. A substantial number of large regular and inverse isotope effects are predicted for the hydrogens on the cyclohexadienyl ring related to activation of the reactant and charge reorganization in the transition state. A large KIE is predicted for the hydrogen atom bound to the ether carbon atom because the largest valency change and charge transfer occurs at the ether bond in both the reactant and tansition state. Observation of the overall pattern of predicted KIEs would ensure that conditions are favorable for the rate‐limiting chemistry. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem 94: 287–292, 2003     

Techniques to Improve Photodynamic Therapy

Photodynamic therapy [dye-light therapy] is an excellent technique for use in detection and treatment of cancerous tissues. While this therapy is effective, it is limited by the phototoxic reactions that can occur in the surrounding normal tissues. These damaging side effects are of particular importance when treating neurosensory organs, such as the human eye. We report here new treatment strategies to enhance photodynamic effectiveness while limiting side effects to normal tissues.     

Optical Nonlinearity of Hybrid and Nanocomposite Materials Prepared by the Sol-Gel Method

In this paper the nonlinear refractive index, optical limiting effect, photoinduced and electroinduced second harmonic generation of dye-doped hybrid and nanoparticle-doped composite materials prepared by the sol-gel process have been reported. The origin of these nonlinear optical effects has been discussed.     

Determination of the mass transfer coefficients in direct immersion solid‐phase microextraction

Diffusion of the analytes across the diffusion boundary layers and subsequently through the fiber coatings determines the extraction kinetics of solid‐phase microextraction in aqueous matrices. Besides, the matrix effects can distort the behaviors of the analytes transferring across the diffusion boundary layers. However, these processes were always studied via certain simplification, which often left the mass transfer through the fiber coatings unconsidered and the matrix effects partially investigated. Herein, a comprehensive study on the mass transfer processes in direct immersion solid‐phase microextraction was presented. Under different agitation speeds, it was determined that the mass transfer coefficients across the diffusion boundary layers were three to six orders larger than those through the fiber coatings. However, the mass transfer across the diffusion boundary layers was generally the major rate‐limiting step. In addition, the shuttle effect and the barrier effect, which were responsible for accelerating and retarding the extraction kinetics, respectively, were found to be the dominant matrix effect alternately under different agitation speeds. This study comprehensively illustrated the major rate‐limiting step and the dominant matrix effects through recording the mass transfer coefficients.     

Dependence of the relative retention of organic compounds on the nature and pressure of the carrier gas and on the thickness of the PEG-20M film in the capillary column

The effects of the carrier gas nature and pressure on the relative retention values of organic compounds were studied using a series of capillary columns differing in the film thickness of the polar stationary phase (PEG-20M). Relative retention depends linearly on the carrier gas pressure. This dependence becomes more pronounced in the following order of carrier gases: helium < nitrogen < carbon dioxide. The limiting relative retention at a carrier gas pressure approaching zero rather than relative retention values measured experimentally (relative retention time, Kovats retention index,etc.) is an invariant characteristic of a compound subjected to chromatography. For the carrier gases studied, the limiting retention values almost does not depend on the nature of the carrier gas used. The limiting indicating the complex absorption-adsorption nature of these parameters. Dissolution of a carrier gas in the stationary liquid phase has an effect on the relative retention. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2177–2186, December, 1997.     

Kinetic isotope effects in the reaction H + C2H4 → C2H5

The high-pressure limiting rate constants of the reactions between H or D atoms and three isotopic ethylenes have been measured in the temperature range 206–461 K. Practically no isotope effects due to the differences between the ethylenes could be observed. This result does not agree with the prediction recently made by the activated complex theory.     

Effects of acrylonitrile water solubility on limiting conversion and copolymer composition in suspension polymerization

The effects of acrylonitrile (AN) water solubility on the limiting conversion and copolymer composition of the AN and AN/vinylidene chloride (VDC) suspension polymerization were investigated. It was found that AN dissolved in aqueous phase does not transfer back to oil phase in AN suspension homopolymerization but partially does in AN/VDC suspension copolymerization, and thus the limiting conversion is lowered and decreases with water/oil ratio increasing in both AN and AN/VDC suspension polymerization. For the continuous transport of AN in aqueous phase to oil phase during suspension polymerization, the composition distribution of AN/VDC copolymer prepared by suspension polymerization is narrower than that by bulk polymerization. The calculated composition of AN/VDC suspension copolymer with considering AN water solubility is consistent with the experimental data.     

Use of a free-expansion jet in ultra-high-resolution inverse raman spectroscopy

Rotationally resolved, ultra-high-resolution inverse Raman spectra of CH₄ have been obtained in a free-expansion jet. Using relatively mild evpansion conditions a pure methane jet has been cooled to a rotational temperature of 13 K. The limiting rotational state populations observed, however, are not Boltzmann because of nuclear spin effects.     

The effects of some transition-metal compounds on the flame retardance of poly(styrene-co-4-vinyl pyridine) and poly(methyl methacrylate-co-4-vinyl pyridine)

Several copolymers of both styrene and methyl methacrylate with 4-vinyl pyridine have been prepared and modified by coordination with the transition-metal compounds vanadium acetylacetonate (VO[acac]₂), vanadyl dichloride (VOCl₂) and ferric chloride. The flame-retardant effects of these modifications have been assessed by measurements of limiting oxygen indices, by thermogravimetric analysis, and by examination of chars by scanning electron microscopy. Effects on mechanical properties have been assessed by dynamic mechanical thermal analysis. The limiting oxygen indices of the modified polymers are significantly higher than those of the parent polymers, and the production of considerable amounts of rigid, intumescent chars suggests predominantly condensed-phase mechanisms of flame retardance.