含1，3，4—恶二唑环系的电致发光材料的研究进展

1,3,4－恶二唑系是一个缺电子的基团和很弱的空穴接受体,含有1,3,4－恶二唑单元的化合物是一类具有良好电子传输功能的电致发光材料,本文对含有1,3,4－恶二唑单元的有机小分子和高分子型电致发光材料的近期作了综述,而且在这类材料的分子设计方面也作了简要的展望。     

电致发光材料--二取代噁二唑苯的合成

1　引言有机电致发光显示器件作为一项前景广阔的技术 ,近年来已得到了迅速发展。 1 988年日本九州大学斋藤省吾 [1] 等人首次以口恶二唑衍生物为电子传输材料和采用多杂结构 [2 ] ,获得了发蓝光的器件。其发光辉度更高 ,寿命更长 ,从而推动了有机电致发光材料的研究。口恶二唑类衍生物(Oxadiazole,OXD)是荧光性很强的一类化合物 ,过去用做荧光闪烁剂 [3] ,近年来已用于有机电致发光材料 ,并获得了很好的效果。它们既可作电子传输材料 ,又可作发光材料 ,且波长范围都在蓝光和紫外区。本文设计的 1 ,3-二 (5-对叔丁基苯基 -1 ,3,4-口恶二唑…     

均三嗪基修饰的1，3，4-噁二唑类化合物的合成

1，3，4-噁二唑类材料具有优良的电子传输性及很好的耐热性和抗氧化性，是目前应用最广泛的电子传输材料。然而由于小分子化合物性质不稳定，尤其是其热稳定性差以及易重结晶，从而影响电致发光器件的使用寿命。本文引入均三嗪基团对其进行化学修饰以改善其电子传输性能和稳定性，合成了几种2-苯基-5-(对氨基苯基)-1，3，4-噁二唑取代的二氯均三嗪及其衍生物。合成路线如下。     

含1, 3, 4-噁二唑环聚合物电致发光材料的近期进展

含1, 3, 4-噁二唑环的聚合物作为一种新型的具有电子传输功能的聚合物电致发光材料在近10年的研究中引起了人们的极大关注，这种聚合物可以通过不同的合成方法获得，为材料的设计提供了极大的便利。本文综述了近几年来含1, 3, 4-噁二唑环聚合物电致发光材料的研究进展，探讨了这一领域可能的发展方向。     

含苯并硒二唑聚咔唑/芴类共轭聚电解质及其前驱体的合成与性能研究

采用Suzuki偶合反应合成了一系列新型的咔唑、芴和2,1,3-苯并硒二唑的共聚物——聚[3,6-(N-(2-乙基己基))咔唑-2,1,3-苯并硒二唑-9,9-双(N,N-二甲基胺丙基)芴](PCzN-BSeD)及其相应的聚电解质衍生物——聚[3,6-(N-(2-乙基己基))咔唑-2,1,3-苯并硒二唑-9,9-(双(3′-(N,N-二甲基)-N-乙基铵)丙基)芴]二溴(PCzNBr-BSeD).在聚咔唑和芴中引入不同比例的2,1,3-苯并硒二唑(BSeD)单元,引起了由咔唑和芴链段向窄带隙苯并硒二唑(BSeD)单元有效的能量转移.通过对聚合物电致发光性能的研究,发现用聚(3,4-亚乙基二氧基噻吩)(PEDOT)或聚(3,4-亚乙基二氧基噻吩)/聚乙烯咔唑(PEDOT/PVK)作为空穴传输层时,器件的性能相差不大,表明咔唑的引入较明显的改善了聚合物的空穴注入性能.而且几乎所有的聚合物用高功函数铝作阴极的器件和用钡/铝作阴极的器件具有相近的发光性能,表明这类聚合物具有良好的电子注入性能.     

含萘噁二唑铍配合物的合成及光致发光和电致发光性能研究

合成了含有萘环的二唑铍配合物并对其进行了表征.在紫外光的激发下配合物能够发出很强的蓝色荧光.采用NPB为空穴传输层、配合物为发光层制备了双层器件,得到了蓝色的电致发光,证明该配合物是一种良好的电致发光材料.     

含萘(口恶)二唑铍配合物的合成及光致发光和电致发光性能研究

合成了含有萘环的(口恶)二唑铍配合物并对其进行了表征. 在紫外光的激发下配合物能够发出很强的蓝色荧光. 采用NPB为空穴传输层、配合物为发光层制备了双层器件, 得到了蓝色的电致发光, 证明该配合物是一种良好的电致发光材料.     

含噁二唑单元共轭聚合物合成与性质研究

单体 2 ,5 双 (4 溴苯 ) 1,3,4 二唑 (M Ⅰ )与 1,4 二乙烯基 2 ,5 二正丁氧基苯 (M Ⅱ ) ,在钯催化下通过Heck偶合反应合成得到共轭聚合物 ;单体和聚合物进行了1 H NMR ,1 3C NMR、质谱、FT IR、UV、荧光光谱、GPC、元素分析、热分析等测试 ;二唑 (OXD)基团是一种很好的生色团 ,对氧和热特别稳定 ,二唑环的亲电子性能使其特别适合于作为电子传输层 ,聚合物能发射很强的绿色荧光 ,它将是一类潜在的光电高分子材料     

聚乙烯丙烯酸与聚(2-乙基-2-噁唑啉)接枝共聚物的合成及表征

选用聚乙烯 丙烯酸 (EAA)为接枝母体 ,首先摸索出 2 乙基 2 唑啉阳离子开环聚合的规律 ,得到高转化率端基为活性离子的聚 ( 2 乙基 2 唑啉 ) (PEOX) ,再与EAA羟基侧基进行接枝反应 ,考察了开环聚合条件及接枝反应条件对接枝率的影响 ,在一定的条件下得到了接枝率 >2 5%的聚乙烯 丙烯酸与聚 ( 2 乙基 2 唑啉 )的接枝共聚物 (EAA g PEOX) .该接枝物用于聚对苯二甲酸丁二醇酯 /聚丙烯 (PBT/PP)共混体系中作相容剂 ,可提高两者的相容性 .     

新型1，3，4-嗯二唑衍生物的能带结构及其对器件性能的影响

利用紫外-可见吸收光谱和电化学方法表征了三个系列新型的1，3，4-噁二唑类化合物的能级结构．设计并制备了以噁二唑衍生物与MEH—PPV的共混物作为发光层的电致发光器件（LED），比较了不同结构咏二唑引人发光层后对器件性能的影响．研究结果表明，以共混物为发光层的LED，其最大亮度可达到11810cd／m^2（8．5V），最大流明效率为1．1cd／A．与纯MEH—PPV单层发光器件相比，最大亮度提高了约40倍．结果表明，嘿二唑类衍生物具有优良的电子传输特性，将其引入发光层能有效地提高LED的性能．     

New synthesis of highly potential efficient bluish‐green electroluminescent materials based on 1,3,4‐oxadiazole–triazolopyridinone–carbazole derivatives for single‐layer devices

New potential bluish‐green electroluminescent materials of 1,3,4‐oxadiazole–triazolopyridin‐ one–carbazole derivatives were synthesized and characterized for single‐layer devices. Carbazole, pyridine, and triazolopyridinone were completely introduced into 1,3,4‐oxadiazole skeletal to play assistant roles in controlling fundamental photolytic process due to the electron‐donating nature, excellent photoconductivity, and flexible structure properties. Following the spectroscopic studies and the measurements of cyclic voltammogram, 1,3,4‐oxadiazole–triazolopyridinone–carbazole derivatives were highly efficient bluish‐green electroluminescent materials. © 2006 Wiley Periodicals, Inc. Heteroatom Chem 17:160–165, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20201     

Synthesis and characterization of new electroluminescent materials of 1,3,4‐oxadiazole–1,2,3‐triazole hybrids and 1,3,4‐oxadiazole–1,2,3‐triazole–pyridine derivatives

New electroluminescent materials of 1,3,4‐oxadiazole–1,2,3‐triazole and 1,3,4‐oxadiazole–1,2,3‐triazole–pyridine hybrid derivatives were synthesized and characterized. Following spectroscopic studies and characterization of their electronic properties, 1,3,4‐oxadiazole–1,2,3‐triazole hybrids and 1,3,4‐oxadiazole–1,2,3‐triazole–pyridine derivatives were found to be potentially efficient blue electroluminescent materials. © 2006 Wiley Periodicals, Inc. Heteroatom Chem 17:322–328, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20210     

Synthesis and optoelectronic properties of luminescent poly(p‐phenylenevinylene) derivatives containing electron‐transporting 1,3,4‐oxadiazole groups

Three random copolymers ( P1–P3 ) comprising phenylenevinylene and electron‐transporting aromatic 1,3,4‐oxadiazole segments (11, 18, 28 mol %, respectively) were prepared by Gilch polymerization to investigate the influence of oxadiazole content on their photophysical, electrochemical, and electroluminescent properties. For comparative study, homopolymer poly[2‐methoxy‐5‐(2′‐ethylhexyloxy)‐1,4‐p‐phenylenevinylene] ( P0 ) was also prepared by the same process. The polymers ( P0–P3 ) are soluble in common organic solvents and thermally stable up to 410 °C under a nitrogen atmosphere. Their optical properties were investigated by absorption and photoluminescence spectroscopy. The optical results reveal that the aromatic 1,3,4‐oxadiazole chromophores in P1–P3 suppress the intermolecular interactions. The HOMO and LUMO levels of these polymers were estimated from their cyclic voltammograms. The HOMO levels of P0–P3 are very similar (?5.02 to ?5.03 eV), whereas their LUMO levels decrease readily with increasing oxadiazole content (?2.7, ?3.08, ?3.11, and ?3.19 eV, respectively). Therefore, the electron affinity of the poly(p‐phenylenevinylene) chain can be gradually enhanced by incorporating 1,3,4‐oxadiazole segments. Among the polymers, P1 (11 mol % 1,3,4‐oxadiazole) shows the best EL performance (maximal luminance: 3490 cd/m², maximal current efficiency: 0.1 cd/A). Further increase in oxadiazole content results in micro‐phase separation that leads to performance deterioration. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4377–4388, 2007     

Synthesis and characterization of luminescent polyethers with 2,5‐distyrylthiophene and aromatic oxadiazole chromophores

Two new luminescent copolyethers ( P1 and P2 ) with isolated 2,5‐distyrylthiophene‐emitting segments and electron‐transporting 2,5‐diphenyl‐1,3,4‐oxadiazole chromophores were successfully synthesized by the Horner–Wadworth–Emmons reaction. The solubility, optical, and electrochemical properties of the polymers were investigated and correlated with nonlinear thiophene and 1,3,4‐oxadiazole groups. P2 with pendant 1,3,4‐oxadiazole was soluble in common organic solvents such as chloroform, tetrahydrofuran, and C₂H₂Cl₄. Thermogravimetric analysis and differential scanning calorimetry showed that the copolyethers were thermally stable below 345 °C, with glass‐transition temperatures higher than 110 °C. They were yellow‐greenish emitting materials with a band gap of 2.57–2.58 eV estimated from the onset absorption. Incorporating the thiophene moiety narrowed the band gaps of the copolyethers. The photophysical and electronic properties of the polymer and the preliminary electroluminescent device made from the polymer demonstrate that the polymer may be a potential candidate material for the fabrication of polymeric light‐emitting devices. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2927–2936, 2002     

Luminescent copoly(aryl ether)s consisting of alternate oxadiazole and 1,4‐distyrylbenzene derivatives: Synthesis and characterization

In an effort to decrease the electron‐injection barrier from the anode electrode, four copoly(aryl ether)s ( P1 – P4 ), consisting of alternating isolated electron‐transporting [2,5‐diphenyl‐1,3,4‐oxadiazole for P1 and P3 and 5,5′‐diphenyl‐2,2′‐p‐(2,5‐bishexyloxyphenylene)‐bis‐1,3,4‐oxadiazole for P2 and P4 ] and emitting chromophores (1,4‐distyryl‐2,5‐dihexyloxybenzene for P1 and P2 and 1,4‐distyryl‐2,5‐dihexylbenzene for P3 and P4 ), have been synthesized by the nucleophilic displacement reaction between bisfluoride and bisphenol monomers. They are basically amorphous materials with 5% weight‐loss temperature above 400 °C. The photoluminescence spectra and quantum yields of these copolymers are dependent on the compositions of the two isolated fluorophores. The highest occupied molecular orbital and lowest unoccupied molecular orbital energy levels of these copolymers have been estimated from their cyclic voltammograms. All the observations directly prove that the oxidation starts at the hole‐transporting segments. The electron affinity can be enhanced by the introduction of isolated electron‐transporting segments that lead to a charge‐injection balance. Single‐layer light‐emitting diodes (Al/ P1 – P4 /ITO glass) have been fabricated. P1 and P2 reveal blue electroluminescence, and P3 and P4 reveal purple‐blue electroluminescence. Moreover, the incorporation of bisoxadiazole units increases the electron affinity and reduces the turn‐on electric field better than one oxadiazole unit. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2765–2777, 2003     

Synthesis and characterization of 1,3,4-oxadiazole derivatives containing alkoxy chains with different lengths

The synthesis, optical properties, electrochemical properties, electronic structures and applications in electroluminescent device of three series of 1,3,4-oxadiazole derivatives, 1,4-bis[(4-methylphenyl)-1,3,4-oxadiazolyl]phenylene (OXD₁), 5,5′-di-(4-methyl)-2,2′-p-(2,5-bisalkoxyphenylene)-bis-1,3,4-oxadiazole (OXD_2–n) and 1,4-bis[(4-alkoxyphenyl)-1,3,4-oxadiazolyl]phenylene (OXD_3–n) are reported. The molecular structures of the oxadiazole compounds were confirmed by FT-IR, ¹H NMR spectroscopy and elemental analysis. The optical and electrochemical properties of the compounds were investigated by UV–vis absorption and photoluminescence spectroscopy as well as cyclic voltammetry. The results show that introduction of two alkoxy groups whose electron-donating ability is stronger than that of methyl groups increases the electron density of the conjugated segment of OXD_2–n (with side-on alkoxy substituents) and OXD_3–n (with end-on alkoxy substituents), and thus leads to the absorption maximum bathochromic-shift compared to that of OXD₁. The HOMO and LUMO energy levels of the compounds studied are in the range of −2.78 to −2.89 and −5.75 to −6.20 eV. Calculations on the representative compounds by the Dmol³ package of MS Modeling 3.0 revealed that the increase of energy levels in both OXD_2–n and OXD_3–n was due to the change of the frontier molecular orbital distribution in the central benzene ring. The light-emitting devices have been fabricated using blends of MEH-PPV and these compounds as emissive layers, among which, maximum brightness up to 11810 cd m⁻² (8.5 V) has been observed, which is 40 times brighter than that with MEH-PPV. The result of the devices suggested that oxadiazole derivatives studied function well as electron-transporting materials and can be used in LEDs, and thus to enhance the efficiency of LEDs.     

Novel silicon-based alternating copolymers: synthesis,photophysical properties,and tunable EL colors

We synthesized novel silicon-based alternating copolymers for tunable electroluminescent (EL) colors by Heck synthetic method. Their thermal, photophysical and electroluminescent properties were studied. Most of them exhibited a blue-green EL color at the operating voltage of lower than 12 V. Unusually, we observed the white EL color from a EL device based on SiPhPVK. From photophysical studies and the time-resolved PL spectroscopies, it might be attributed to the formation of stabilized excited state in SiPhPVK. Furthermore, in order to reduce the operating voltage of their LED with increasing the electron affinity of the main chain in silicon-based alternating copolymers, we synthesized the silicon-based copolymers containing electron transporting oxadiazole units in main chain. We also studied their photophysical and electroluminescent properties.     

Blue fluorescent polyamides containing naphthalene and oxadiazole rings

New polyamides containing 1,3,4‐oxadiazole and naphthalene rings were prepared by low‐temperature solution polycondensation reaction of a new diamine containing preformed oxadiazole ring with various aromatic diacid chlorides. Elemental analysis, mass, infrared, and nuclear magnetic resonance spectroscopy were used to confirm the structure of the monomers and corresponding polymers. The thermal stability and glass transition temperatures of these poly(oxadiazole‐amide)s were measured and compared with those of related polymers. Their good solubility allows them to be processed in very thin films with smooth surfaces, without pinholes or cracks, when studied by atomic force microscopy. Upon irradiation with UV light the polymers showed photoluminescence maxima in the blue spectral range, both in solution and in solid state. Cyclic voltammetry (CV) was performed in order to obtain information about the electrochemical stability and reversibility of the redox processes of these polyamides. The highest occupied molecular orbital and the lowest unoccupied molecular orbital energy levels, and electrochemical and optical band gap values were calculated by using the results of CV and UV/vis, respectively, showing very good electron and hole injection and transport characteristics. These properties make the present polymers suitable for application in electroluminescent devices. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Mass spectrometric study of 1,2,4- and 1,3,4-oxadiazoles containing indole substituents

1,2,4- and 1,3,4-Oxadiazoles containing indole substituents decompose upon electron impact due to breakage of bonds in the oxadiazole ring. Skeletal rearrangements may occur in the molecular ions of 2,5-diaryl-1,3,4-oxadiazoles due to migration of the aryl groups.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 4, pp. 539–543, April, 1986.