Hydration forces between silica surfaces: experimental data and predictions from different theories

Silica is a very interesting system that has been thoroughly studied in the last decades. One of the most outstanding characteristics of silica suspensions is their stability in solutions at high salt concentrations. In addition to that, measurements of direct-interaction forces between silica surfaces, obtained by different authors by means of surface force apparatus or atomic force microscope (AFM), reveal the existence of a strong repulsive interaction at short distances (below 2 nm) that decays exponentially. These results cannot be explained in terms of the classical Derjaguin, Landau, Verwey, and Overbeek (DLVO) theory, which only considers two types of forces: the electrical double-layer repulsion and the London-van der Waals attraction. Although there is a controversy about the origin of the short-range repulsive force, the existence of a structured layer of water molecules at the silica surface is the most accepted explanation for it. The overlap of structured water layers of different surfaces leads to repulsive forces, which are known as hydration forces. This assumption is based on the very hydrophilic nature of silica. Different theories have been developed in order to reproduce the exponentially decaying behavior (as a function of the separation distance) of the hydration forces. Different mechanisms for the formation of the structured water layer around the silica surfaces are considered by each theory. By the aid of an AFM and the colloid probe technique, the interaction forces between silica surfaces have been measured directly at different pH values and salt concentrations. The results confirm the presence of the short-range repulsion at any experimental condition (even at high salt concentration). A comparison between the experimental data and theoretical fits obtained from different theories has been performed in order to elucidate the nature of this non-DLVO repulsive force.     

Direct comparison of atomic force microscopic and total internal reflection microscopic measurements in the presence of nonadsorbing polyelectrolytes

We have investigated the structural and depletion forces between silica glass surfaces in aqueous, salt-free solutions of sodium poly(styrene sulfonate). The interaction forces were investigated by two techniques: total internal reflectance microscopy (TIRM) and colloid probe atomic force microscopy (AFM). The TIRM technique measures the potential energy of interaction directly, while the AFM is a force balance. Comparison between the data sets was used to independently calibrate the AFM data since the separation distances cannot be unequivocally determined by this technique. Oscillatory structural forces are excellent for this work since they give multiple reference points against which to analyze. Comparison of the data from the two techniques highlighted significant uncertainties in the AFM data. At low polymer concentrations, a significant uncertainty in the apparent zero separation distance was seen as a result of the AFM cantilever reaching an apparent constant compliance region prior to any real contact between the surfaces. Further complications arising from the number and position of the measured minima were also seen in the dilute polymer concentration regime as a result of hydrodynamic drainage between the approaching surfaces in the AFM perturbing the delicate structural components in the fluid.     

Measuring forces with the AFM: polymeric surfaces in liquids

This review links together for the first time both the practicalities of force measurement and the work carried out to date on force detection between polymeric surfaces in liquids using the atomic force microscope (AFM). Also included is some of the recent work that has been carried out between surfactant surfaces and biologically coated surfaces with the AFM. The emphasis in this review is on the practical issues involved with force measurement between these types of surfaces, and the similarities and irregularities between the observed types of forces measured. Comparison is made between AFM and surface force apparatus (SFA) measurements, as there is a much longer history of work with the latter. Results indicate that forces between the surfaces reviewed here are a complicated mixture of steric-type repulsion, conformational behaviour on separation and long-range attraction, which is often ascribed to 'hydrophobic' forces. The origin of this latter force remains uncertain, despite its almost ubiquitous appearance in force measurements with these types of surfaces.     

Atomic force microscopy measurement of heterogeneity in bacterial surface hydrophobicity

The structure and physicochemical properties of microbial surfaces at the molecular level determine their adhesion to surfaces and interfaces. Here, we report the use of atomic force microscopy (AFM) to explore the morphology of soft, living cells in aqueous buffer, to map bacterial surface heterogeneities, and to directly correlate the results in the AFM force-distance curves to the macroscopic properties of the microbial surfaces. The surfaces of two bacterial species, Acinetobacter venetianus RAG-1 and Rhodococcus erythropolis 20S-E1-c, showing different macroscopic surface hydrophobicity were probed with chemically functionalized AFM tips, terminating in hydrophobic and hydrophilic groups. All force measurements were obtained in contact mode and made on a location of the bacterium selected from the alternating current mode image. AFM imaging revealed morphological details of the microbial-surface ultrastructures with about 20 nm resolution. The heterogeneous surface morphology was directly correlated with differences in adhesion forces as revealed by retraction force curves and also with the presence of external structures, either pili or capsules, as confirmed by transmission electron microscopy. The AFM force curves for both bacterial species showed differences in the interactions of extracellular structures with hydrophilic and hydrophobic tips. A. venetianus RAG-1 showed an irregular pattern with multiple adhesion peaks suggesting the presence of biopolymers with different lengths on its surface. R. erythropolis 20S-E1-c exhibited long-range attraction forces and single rupture events suggesting a more hydrophobic and smoother surface. The adhesion force measurements indicated a patchy surface distribution of interaction forces for both bacterial species, with the highest forces grouped at one pole of the cell for R. erythropolis 20S-E1-c and a random distribution of adhesion forces in the case of A. venetianus RAG-1. The magnitude of the adhesion forces was proportional to the three-phase contact angle between hexadecane and water on the bacterial surfaces.     

The influence of electrostatic forces on protein adsorption

In this paper we investigate the importance of electrostatic double layer forces on the adsorption of human serum albumin by UV-ozone modified polystyrene. Electrostatic forces were measured between oxidized polystyrene surfaces and gold-coated atomic force microscope (AFM) probes in phosphate buffered saline (PBS) solutions. The variation in surface potential with surface oxygen concentration was measured. The observed force characteristics were found to agree with the theory of electrical double layer interaction under the assumption of constant potential. Chemically patterned polystyrene surfaces with adjacent 5 microm x 5 microm polar and non-polar domains have been studied by AFM before and after human serum albumin adsorption. A topographically flat surface is observed before protein adsorption indicating that the patterning process does not physically modify the surface. Friction force imaging clearly reveals the oxidation pattern with the polar domains being characterised by a higher relative friction compared to the non-polar, untreated domains. Far-field force imaging was performed on the patterned surface using the interleave AFM mode to produce two-dimensional plots of the distribution of electrostatic double-layer forces formed when the patterned polystyrene surfaces is immersed in PBS. Imaging of protein layers adsorbed onto the chemically patterned surfaces indicates that the electrostatic double-layer force was a significant driving force in the interaction of protein with the surface.     

Changes in the interaction characteristics of polyelectrolyte complex covered silica surfaces

The adsorption of polyelectrolyte complexes, PEC, made from the cationic poly (diallyldimethylammonium) chloride (PDADMAC) and the anionic maleic acid-co-propene copolymer (MA-P) on a Si-wafer surface has been studied. The application of highly diluted colloidally dispersed PEC solutions led to the deposition of single PEC particles onto the surface of the Si-wafer. The interaction forces of the heterogeneously covered surface were monitored by direct force measurements with an atomic force microscope (AFM) in the force volume mode. On the surface of a single PEC particle drastic changes in the interaction forces were found in comparison with the unmodified Si-wafer: in all force vs. distance curves a strong increase of the adhesion was measured that can be attributed to the formation of electrostatic bonds between the negatively charged Si₃N₄-tip and the cationic excess charge of the PEC. Additionally, the behavior during approach of both surfaces has been distinct: at pH 6.1 we see a long range electrostatic attraction between the tip and the PEC particle. The attraction becomes even stronger at pH 4.1, because of an increased positive net charge. Generally, a heterogeneous surface with a wide variety of interaction features can be created by the adsorption of PEC particles.     

Interactions between solid surfaces with adsorbed polyelectrolytes of opposite charge

Adsorption of polyelectrolytes to surfaces of opposite charge typically leads to charge neutralization and subsequent charge reversal. As can be shown by direct force measurements and stability studies, the interaction forces are dominated by repulsive forces originating from diffuse layer overlap and attractive van der Waals forces, in line with the classical theory of Derjaguin, Landau, Verwey, and Overbeek (DLVO). Recently, the existence of an additional attractive non-DLVO force was demonstrated, and its likely origin is the attraction between patch-charge heterogeneities. With novel single molecule pulling experiments with the atomic force microscope (AFM) polymer bridging forces could be shown to represent the most important contribution to the adhesion of surfaces coated by polyelectrolytes.     

Detachment of Particles from Surfaces: An AFM Study

We have measured interactions between hydrophilic and hydrophobic surfaces in an aqueous medium at various pH and ionic strengths as well as in some organic solvents using atomic force microscopy and analyzed them in terms of particle adhesion and detachment from surfaces. In hydrophilic systems the forces observed were found to be well described by DLVO theory at large separation distances. Very long range hydrophobic forces were not observed in hydrophilic-hydrophobic systems. Nevertheless, the jump into contact was found to occur at distances greater that those predicted by just van der Waals attraction. The interaction between two hydrophobic surfaces was dominated by the long-range attraction due to hydrophobic forces. This interaction was found to be sensitive to the type of substrate as well as to the pH and electrolyte concentration. Measured pull-off forces showed poor reproducibility. However, average values showed clear trends and were used to estimate interfacial energies or work of adhesion for all systems studied by means of the Derjaguin approximation. These values were compared to those calculated by the surface tension component theory using the acid-base approach. Good qualitative agreement was obtained, giving support for the usefulness of this approach in estimating interfacial energies between surfaces in liquid media. A comparison of the measured adhesion force with hydrodynamic detachment experiments showed good qualitative agreement. Copyright 2001 Academic Press.     

Direct measurement of hydrophobic particle–bubble interactions in aqueous solutions by atomic force microscopy: Effect of particle hydrophobicity

Direct measurements of the interaction forces between a spherical silica particle and a small air bubble have been conducted in aqueous electrolyte solutions by using an atomic force microscope (AFM). The silica particle was hydrophobized with a silanating reagent, and the interaction forces were measured by using several particles with different surface hydrophobicities. In the measured force curves, a repulsive force was observed at large separation distances as the particle moved towards the bubble. The origin of the repulsive force was attributed to an electrostatic double-layer force because both the particle and bubble were negatively charged. After the repulsive force, an extremely long-range attractive force acted between the surfaces. These results indicate that the intervening thin water film between the particle and bubble rapidly collapsed, resulting in the particle penetrating the bubble.

The instability of the thin water film between the surfaces suggests the existence of an additional attractive force. By comparing the repulsive forces of the obtained force curves with the DLVO theory, the rupture thickness was estimated. The hydrophobicity of the particle did not significantly change the rupture thickness, whereas the pH of the solution is considered to be a critical factor.     

Long‐Range Hydrophilic Attraction between Water and Polyelectrolyte Surfaces in Oil

The outstanding water wettability and the capability of polyelectrolyte surfaces to spontaneously clean oil fouling are determined by their wetting mechanism in the surrounding medium. Here, we have quantified the nanomechanics between three types of polyelectrolyte surfaces (i.e. zwitterionic, cationic, and anionic) and water or oil drops using an atomic force microscope (AFM) drop probe technique, and elucidated the intrinsic wetting mechanisms of the polyelectrolyte surfaces in oil and water media. The measured forces between oil drops and polyelectrolyte surfaces in water can be described by the Derjaguin‐Landau‐Verwey‐Overbeek (DLVO) theory. Surprisingly, strong long‐range attraction was discovered between polyelectrolyte surfaces and water drops in oil, and the strongest interaction was measured for the polyzwitterion. This unexpected long‐range “hydrophilic” attraction in oil could be attributed to a strong dipolar interaction because of the large dipole moment of the polyelectrolytes. Our results provide new nanomechanical insights into the development of novel polyelectrolyte‐based materials and coatings for a wide range of engineering, bioengineering, and environmental applications.     

Mechanistic aspects of protein/material interactions probed by atomic force microscopy

Physicochemical studies on the mechanisms of protein adsorption onto solid material surfaces have been extensively performed so far, mainly based on the analysis of factors such as the equilibrium adsorbed amount (adsorption isotherms), time-dependent change of adsorbed amount (adsorption kinetics), and conformational change of adsorbed protein. However, direct understanding of the strength of the molecular interaction between protein and the material surface has not been established yet. For this issue, the force measurement techniques of an atomic force microscope (AFM) using a protein-modified probe tip are recently becoming powerful tools to analyze the actual interaction forces between protein and material surfaces. In this mini review, we discuss the characteristics and interpretation of the AFM force-versus-distance curves (f–d curves) obtained with the protein-modified probe tip, and the relationship between the forces measured from the f–d curves and the driving forces in the natural process of protein adsorption. Relative degrees of each of the following contributions which determine the character of protein adsorption are clarified: (1) the intrinsic protein/material forces mediated by solvent, (2) the thermodynamic stability of protein/material adhesion interface, and (3) diffusion force of protein molecules. Within these driving forces, the latter two in particular are confirmed to play essential roles in determining the character of protein adsorption, based on the profiles of f–d curves.     

Solvation forces between silica bodies in supercritical carbon dioxide

We report Monte Carlo simulations of the solvation pressure between two planar surfaces, which represent the interface of spherical silica nanoparticles in supercritical carbon dioxide. Carbon dioxide (CO2) was modeled as an atomistic dumbbell or a spherical Lennard-Jones particle. The interaction between CO2 molecules and silica surfaces was characterized by the standard Steele potential with energetic heterogeneities representing the hydrogen bonds. The parameters for the solid-fluid interaction potentials were obtained by fitting our simulations to the experimental isotherms of CO2 sorption on mesoporous siliceous materials. We studied the dependence of the solvation force on the distance between planar silica surfaces at T = 318 K, at equilibrium bulk pressures p(bulk) ranging from 69 to 200 atm. At 69 atm, we observed a long-range attraction between the two surfaces, and it vanished when the pressure was increased to 102 and then 200 atm. The results obtained with different fluid models were consistent with each other. According to our observations, energetic heterogeneities of the surface have negligible influence on the solvation pressure. Using the Derjaguin approximation, we calculated the solvation forces between spherical silica nanoparticles in supercritical CO2 from the solvation pressures between the planar surfaces.     

Direct measurement of recognition forces between proteins and membrane receptors

The interactions between the protein, cholera toxin B subunit attached to an atomic force microscope, AFM, cantilever, CTB and its receptor the ganglioside, GM1 have been measured in a dilute electrolyte solution, pH 5.5. Although there is variation in the force separation data obtained, particularly on approach of the AFM tip to the GM1 surface where usually, but not always an attraction is noted, an adhesion is always noted on separation of the surfaces. The strength of this adhesion varies from experiment to experiment, but appears to be quantised at a value of around 90 pN. Addition of cholera toxin to the aqueous electrolyte solution completely removes the attractive interaction and adhesion. This gives us confidence that in the earlier experiments, a specific interaction between the CTB and GM1 was measured.     

Non-DLVO silica interaction forces in NMP-water mixtures. II. An asymmetric system

The interaction between energetically asymmetric hydrophilic and hydrophobic surfaces has fundamental and practical importance in both industrial and natural colloidal systems. The interaction forces between a hydrophilic silica sphere and a silanated, hydrophobic glass plate in N-methyl-2-pyrrolidone (NMP)-water binary mixtures were measured using atomic force microscopy (AFM). A strong and long-range attractive force was observed in pure water and was attributed to the formation of capillary bridges associated with nanoscale bubbles initially present on the hydrophobic surface. When NMP was added, the capillary force and corresponding pull-off force became less attractive, which was explained readily in terms of the surface wettability by the binary solvent mixture. Similar to the case of symmetric (two hydrophilic) surfaces, the range of attraction between the asymmetric surfaces was maximized at around 30 vol % NMP, which is consistent with the formation of a thick adsorbed macrocluster layer on the hydrophilic silica surface.     

Effect of cation size and charge on the interaction between silica surfaces in 1:1, 2:1, and 3:1 aqueous electrolytes

Application of two complementary AFM measurements, force vs separation and adhesion force, reveals the combined effects of cation size and charge (valency) on the interaction between silica surfaces in three 1:1, three 2:1, and three 3:1 metal chloride aqueous solutions of different concentrations. The interaction between the silica surfaces in 1:1 and 2:1 salt solutions is fully accounted for by ion-independent van der Waals (vdW) attraction and electric double-layer repulsion modified by cation specific adsorption to the silica surfaces. The deduced ranking of mono- and divalent cation adsorption capacity (adsorbability) to silica, Mg(2+) < Ca(2+) < Na(+) < Sr(2+) < K(+) < Cs(+), follows cation bare size as well as cation solvation energy but does not correlate with hydrated ionic radius or with volume or surface ionic charge density. In the presence of 3:1 salts, the coarse phenomenology of the force between the silica surfaces as a function of salt concentration resembles that in 1:1 and 2:1 electrolytes. Nevertheless, two fundamental differences should be noticed. First, the attraction between the silica surfaces is too large to be attributed solely to vdW force, hence implying an additional attraction mechanism or gross modification of the conventional vdW attraction. Second, neutralization of the silica surfaces occurs at trivalent cation concentrations that are 3 orders of magnitude smaller than those characterizing surface neutralization by mono- and divalent cations. Consequently, when trivalent cations are added to our cation adsorbability series the correlation with bare ion size breaks down abruptly. The strong adsorbability of trivalent cations to silica contrasts straightforward expectations based on ranking of the cationic solvation energies, thus suggesting a different adsorption mechanism which is inoperative or weak for mono- and divalent cations.     

Interaction forces between adsorbed polymer layers

The interaction forces between adsorbed polymer layers were investigated. Two types of graft copolymers that were adsorbed on hydrophobic surfaces have been investigated: (i) a graft copolymer consisting of polymethylmethacrylate/polymethacrylic acid back bone (the B chain) on which several poly(ethylene oxide) chains are grafted (to be referred to as PMMA/PEO_n); and (ii) a graft copolymer consisting of inulin (linear polyfructose with degree of polymerization > 23) (the A chain) on which several C₁₂ chains are grafted (INUTEC SP1). In the first case adsorbed layers of the graft copolymer were obtained on mica sheets and the interaction forces were measured using the surface force apparatus. In the second case the interaction forces were measured using Atomic Force Microscopy (AFM). For this purpose a hydrophobically modified glass sphere was attached to the tip of the cantilever of the AFM and the glass plate was also made hydrophobic. Both the sphere and the glass plate contained an adsorbed layer of INUTEC SP1.In the surface forces apparatus one essentially measures the energy E(D)–distance D curves for the graft copolymer of PMMA/PEO_n between mica surfaces bearing the graft copolymer and this could be converted to interaction energy between flat surfaces. Using the de Gennes scaling theory, it is possible to calculate the interaction energy between the polymer layers. The same graft copolymer was used in latex dispersions and the high frequency modulus G′_∝ was measured as a function of the volume fraction ? of the dispersion. This high frequency modulus could be related to the potential of mean force. In this way one could compare the results obtained from rheology and those obtained from direct measurement of interaction forces.In the AFM method, the interaction forces are measured in the contact area between two surfaces, i.e. a spherical glass particle and a glass plate. Both glass spheres and plates were hydrophobized using dichlorodimethylsilane. Results were obtained for adsorbed layers of INUTEC SP1 in water and in the presence of various concentrations of Na₂SO₄ (0.3, 0.8, 1.0 and 1.5 mol dm^{− 3}). All results showed a rapid increase of force with a decrease of separation distance and the forces were still repulsive up to the highest Na₂SO₄ concentration. This explains the high stability of dispersions when using INUTEC SP1 as stabilizer.     

Polarization interaction of disperse particles with not thin Debye atmosphere

The electric field of the equilibrium double layer acts only at the distance of the Debye length. Therefore, the distances at which the electrostatic interaction forces act between particles in the absence of external fields are limited by the same length. As shown previously, the external electric field results in the appearance of volume charges outside DL. As a result, the long-range acting electric forces appear. In addition, the forces become anisotropic.

The polarization forces are proportional to at least the square of the external field. Previously we had shown that quadratic forces occurred not only as a result of the interaction of the charges being linear to an external field, but as a result of the interaction between the charges being quadratic to an external field as well as the equilibrium charges. We have described these quadratic charges in the theory of the double layer nonlinear polarization without any restrictions on the double layer thickness. This theory was developed by the method of successive approximations on the extemal field and the electrokinetic ς-potential. These results are obtained in analytical form and agree with the Fixman and Jagannathan's 1983 numerical solutions.

Our calculations of the polarization interaction energy showed: (a) in suspension of polar nonconductive particles in the less polar medium the orientation of the duplet perpendicular to field is more advantageous than along the field; (b) the attraction of the charged polar particles is substituted by the repulsion with the particle ς-potential increase both for longitude duplet (ς=2.5 mV) and for transverse duplet (ς=1.5 mV); (c) with the polar medium conductivity growth the repulsion forces between particles of the longitude duplet are changed by the attraction forces.     

AFM forces measured between gold surfaces coated with self-assembled monolayers of 1-hexadecanethiol

An atomic force microscope (AFM) was used to measure the forces between gold surfaces with and without hydrophobizing them by the self-assembly of 1-hexadecanethiol. The forces measured between bare gold surfaces were fitted to the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory with a Hamaker constant of 1.2 x 10 (-20) J, which was close to the value determined using the methylene iodide contact angle method but was lower than that calculated using the Lifshitz theory. When the surfaces were hydrophobized in a 0.01 mM thiol-in-ethanol solution for 10 min, the measured forces exhibited a long-range force with a decay length of 35 nm. Despite its high water contact angle (105 degrees ), the force curve was smooth and exhibited no steps. When the surfaces were hydrophobized in a 1 mM thiol solution for longer than 6 h, however, the force curves exhibited steps, indicating that the long-range attractions were caused by bridging bubbles. When the measurements were conducted after washing the substrates with organic solvents, the steps disappeared and long-range attractive forces appeared. In the presence of ethanol, the water contact angle decreased to below 90 degrees , the attraction became weaker, and the force curves became smooth. On the basis of the results obtained in the present work, possible mechanisms for the long-range attractions are discussed.     

Probing colloidal forces between a Si3N4 AFM tip and single nanoparticles of silica and alumina

The atomic force microscope (AFM) has been used to measure surface forces between silicon nitride AFM tips and individual nanoparticles deposited on substrates in 10(-4) and 10(-2) M KCl solutions. Silica nanoparticles (10 nm diameter) were deposited on an alumina substrate and alumina particles (5 to 80 nm diameter) were deposited on a mica substrate using aqueous suspensions. Ionic concentrations and pH were used to manage attractive substrate-particle electrostatic forces. The AFM tip was located on deposited nanoparticles using an operator controlled offset to achieve stepwise tip movements. Nanoparticles were found to have a negligible effect on long-range tip-substrate interactions, however, the forces between the tip and nanoparticle were detectable at small separations. Exponentially increasing short-range repulsive forces, attributed to the hydration forces, were observed for silica nanoparticles. The effective range of hydration forces was found to be 2-3 nm with the decay length of 0.8-1.3 nm. These parameters are in a good agreement with the results reported for macroscopic surfaces of silica obtained using the surface force apparatus suggesting that hydration forces for the silica nanoparticles are similar to those for flat silica surfaces. Hydration forces were not observed for either alumina substrates or alumina nanoparticles in both 10(-4) M KCl solution at pH 6.5 and 10(-2) M KCl at pH 10.2. Instead, strong attractive forces between the silicon nitride tip and the alumina (nanoparticles and substrate) were observed.     

Streptococcus mutans and Streptococcus intermedius adhesion to fibronectin films are oppositely influenced by ionic strength

Bacterial adhesion to protein-coated surfaces is mediated by an interplay of specific and nonspecific interactions. Although nonspecific interactions are ubiquitously present, little is known about the physicochemical mechanisms of specific interactions. The aim of this paper is to determine the influence of ionic strength on the adhesion of two streptococcal strains to fibronectin films. Streptococcus mutans LT11 and Streptococcus intermedius NCTC11324 both possess antigen I/II with the ability to bind fibronectin from solution, but S. intermedius binds approximately 20x less fibronectin than does the S. mutans strain under identical conditions. Both strains as well as fibronectin films are negatively charged in low ionic strength phosphate buffered saline (PBS, 10x diluted), but bacteria appear uncharged in high ionic strength PBS. Physicochemical modeling on the basis of overall cell surface properties (cell surface hydrophobicity and zeta potentials) demonstrates that both strains should favor adhesion to fibronectin films in a high ionic strength environment as compared to in a low ionic strength environment, where electrostatic repulsion between equally charged surfaces is dominant. Adhesion of S. intermedius to fibronectin films in a parallel plate flow chamber was completely in line with this modeling, while in addition atomic force microscopy (AFM) indicated stronger adhesion forces upon retraction between fibronectin-coated tips and the cell surfaces in high ionic strength PBS than in low ionic strength PBS. Thus, the dependence of the interaction on ionic strength is dominated by the overall negative charge on the interacting surfaces. Adhesion of S. mutans to fibronectin films, however, was completely at odds with theoretical modeling, and the strain adhered best in low ionic strength PBS. Moreover, AFM indicated weaker repulsive forces upon approach between fibronectin-coated tips and the cell surfaces in low ionic strength PBS than in high ionic strength PBS. This indicated that the dependence of the interaction on ionic strength is dominated by electrostatic attraction between oppositely charged, localized domains on the interacting surfaces, despite their overall negative charge. In summary, this study shows that physicochemical modeling of bacterial adhesion to protein-coated surfaces is only valid provided the number of specific interaction sites on the cell surfaces is low, such as on S. intermedius NCTC11324. Nonspecific interactions are dominated by specific interactions if the number of specific interaction sites is large, such as on S. mutans LT11. Its ionic strength dependence indicates that the specific interaction is electrostatic in nature and operative between oppositely charged domains on the interacting surfaces, despite the generally overall negatively charged character of the surfaces.