Characterizing Class I WW domains defines key specificity determinants and generates mutant domains with novel specificities

Introduction: WW domains are small protein interaction modules found in a wide range of eukaryotic signaling and structural proteins. Five classes of WW domains have been annotated to date, where each class is largely defined by the type of peptide ligand selected, rather than by similarities within WW domains. Class I WW domains bind Pro-Pro-Xxx-Tyr containing ligands, and it would be of interest to determine residues within the domains that determine this specificity.Results: Fourteen WW domains selected Leu/Pro-Pro-Xxx-Tyr containing peptides ligands via phage display and were thus designated as Class 1 WW domains. These domains include those present in human YAP (hYAP) and WWP3, as well as those found in ubiquitin protein ligases of the Nedd4 family, including mouse Nedd4 (mNedd4), WWP1, WWP2 and Rsp5. Comparing the primary structures of these WW domains highlighted a set of highly conserved residues, in addition to those originally noted to occur within WW domains. Substitutions at two of these conserved positions completely inhibited ligand binding, whereas substitution at a non-conserved position did not. Moreover, mutant WW domains containing substitutions at conserved positions bound novel peptide ligands.Conclusions: Class I WW domains contain a highly conserved set of residues that are important in selecting Pro-Xxx-Tyr containing peptide ligands. The presence of these residues within an uncharacterized WW domain can be used to predict its ability to bind Pro-Xxx-Tyr containing peptide ligands.     

Molecular self-assembly of solid-supported protein crystals

Highly ordered protein arrays have been proposed as a means for templating the organization of nanomaterials. Toward this end, we investigate the ability of the protein streptavidin to self-assemble into various configurations on solid-supported phospholipids. We identify two genetic variants of streptavidin (comprising amino acids 14-136 and 13-139) and examine their molecular organization at the liquid-solid interface. Our results demonstrate that the structural differences between these two protein variants affect both crystalline lattice and domain morphology. In general, these results for the liquid-solid interface are similar and consistent with those at the air-water interface with a few notable differences. Analogous to crystallization at the air-water interface, both forms of streptavidin yield H-like domains with lattice parameters that have C222 symmetry at pH 7. At pH 4, the native, truncated form of streptavidin yields needle-like domains consisting of molecules arranged in P1 symmetry. Unlike crystalline domains grown at the air-water interface, however, the lattice parameters of this P1 crystal are unique and have not yet been reported. The presence of a solid substrate does not appear to dramatically alter streptavidin's two-dimensional crystallization behavior, suggesting that local intermolecular interactions between proteins are more significant than interactions between the interface and protein. Our results also demonstrate that screening the electrostatic repulsion between protein molecules by modulating ionic strength will increase growth rate while decreasing crystalline domain size and macroscopic defects. Finally, we show that these domains are indeed functional by attaching biotinylated gold nanoparticles to the crystals. The ability to modulate molecular configuration, crystalline defects, and domain size on a functional array supports the potential application of this system toward materials assembly.     

Synthetic analogues of glycosylphosphatidylinositol-anchored proteins and their behavior in supported lipid bilayers

Positioned at the C-terminus of many eukaryotic proteins, the glycosylphosphatidylinositol (GPI) anchor is a posttranslational modification that anchors the modified proteins in the outer leaflet of the plasma membrane. GPI-anchored proteins play vital roles in signal transduction, the vertebrate immune response, and the pathobiology of trypanosomal parasites. While many GPI-anchored proteins have been characterized, the biological functions of the GPI anchor have yet to be elucidated at a molecular level. We synthesized a series of GPI-protein analogues bearing modified anchor structures that were designed to dissect the contribution of various glycan components to the GPI-protein's membrane behavior. These anchor analogues were similar in length to native GPI anchors and included mimics of the native structure's three domains. A combination of expressed protein ligation and native chemical ligation was used to attach these analogues to the green fluorescent protein (GFP). These modified GFPs were incorporated in supported lipid bilayers, and their mobilities were analyzed using fluorescence correlation spectroscopy. The data from these experiments suggest that the GPI anchor is more than a simple membrane-anchoring device; it also may prevent transient interactions between the attached protein and the underlying lipid bilayer, thereby permitting rapid diffusion in the bilayer. The ability to generate chemically defined analogues of GPI-anchored proteins is an important step toward elucidating the molecular functions of this interesting post-translational modification.     

Predicting three-dimensional structures of transmembrane domains of β-barrel membrane proteins

β-Barrel membrane proteins are found in the outer membrane of gram-negative bacteria, mitochondria, and chloroplasts. They are important for pore formation, membrane anchoring, and enzyme activity. These proteins are also often responsible for bacterial virulence. Due to difficulties in experimental structure determination, they are sparsely represented in the protein structure databank. We have developed a computational method for predicting structures of the transmembrane (TM) domains of β-barrel membrane proteins. Based on physical principles, our method can predict structures of the TM domain of β-barrel membrane proteins of novel topology, including those from eukaryotic mitochondria. Our method is based on a model of physical interactions, a discrete conformational state space, an empirical potential function, as well as a model to account for interstrand loop entropy. We are able to construct three-dimensional atomic structure of the TM domains from sequences for a set of 23 nonhomologous proteins (resolution 1.8-3.0 ?). The median rmsd of TM domains containing 75-222 residues between predicted and measured structures is 3.9 ? for main chain atoms. In addition, stability determinants and protein-protein interaction sites can be predicted. Such predictions on eukaryotic mitochondria outer membrane protein Tom40 and VDAC are confirmed by independent mutagenesis and chemical cross-linking studies. These results suggest that our model captures key components of the organization principles of β-barrel membrane protein assembly.     

Semi-Synthesis and Analysis of Chemically Modified Zif268 Zinc-Finger Domains

Total synthesis of proteins can be challenging despite assembling techniques, such as native chemical ligation (NCL) and expressed protein ligation (EPL). Especially, the combination of recombinant protein expression and chemically addressable solid-phase peptide synthesis (SPPS) is well suited for the redesign of native protein structures. Incorporation of analytical probes and artificial amino acids into full-length natural protein domains, such as the sequence-specific DNA binding zinc-finger motifs, are of interest combining selective DNA recognition and artificial function. The semi-synthesis of the natural 90 amino acid long sequence of the zinc-finger domain of Zif268 is described including various chemically modified constructs. Our approach offers the possibility to exchange any amino acid within the third zinc finger. The realized modifications of the natural sequence include point mutations, attachment of a fluorophore, and the exchange of amino acids at different positions in the zinc finger by artificial amino acids to create additional metal binding sites. The individual constructs were analyzed by circular dichroism (CD) spectroscopy with respect to the integrity of the zinc-finger fold and DNA binding.     

Chemical Approaches for Studying the Biology and Pharmacology of Membrane Transporters: The Histidine/Large Amino Acid Transporter SLC7A5 as a Benchmark

The localization of membrane transporters at the forefront of natural barriers makes these proteins very interesting due to their involvement in the absorption and distribution of nutrients and xenobiotics, including drugs. Over the years, structure/function relationship studies have been performed employing several strategies, including chemical modification of exposed amino acid residues. These approaches are very meaningful when applied to membrane transporters, given that these proteins are characterized by both hydrophobic and hydrophilic domains with a different degree of accessibility to employed chemicals. Besides basic features, the chemical targeting approaches can disclose information useful for pharmacological applications as well. An eminent example of this picture is the histidine/large amino acid transporter SLC7A5, known as LAT1 (Large Amino Acid Transporter 1). This protein is crucial in cell life because it is responsible for mediating the absorption and distribution of essential amino acids in peculiar body districts, such as the blood brain barrier and placenta. Furthermore, LAT1 can recognize a large variety of molecules of pharmacological interest and is also considered a hot target for drugs due to its over-expression in virtually all human cancers. Therefore, it is not surprising that the chemical targeting approach, coupled with bioinformatics, site-directed mutagenesis and transport assays, proved fundamental in describing features of LAT1 such as the substrate binding site, regulatory domains and interactions with drugs that will be discussed in this review. The results on LAT1 can be considered to have general applicability to other transporters linked with human diseases.     

Multidomain protein solves the folding problem by multifunnel combined landscape: theoretical investigation of a y-family DNA polymerase

Approximately three-fourths of eukaryotic proteins are composed of multiple independently folded domains. However, much of our understanding is based on single domain proteins or isolated domains whose studies directly lead to well-known energy landscape theory in which proteins fold by navigating through a funneled energy landscape toward native structure ensembles. The degrees of freedom for proteins with multiple domains are many orders of magnitude larger than that for single domain proteins. Now, the question arises: How do the multidomain proteins solve the "protein folding problem"? Here, we specifically address this issue by exploring the structure folding relationship of Sulfolobus solfataricus DNA polymerase IV (DPO4), a prototype Y-family DNA polymerase which contains a polymerase core consisting of a palm (P domain), a finger (F domain), and a thumb domain (T domain) in addition to a little finger domain (LF domain). The theoretical results are in good agreement with the experimental data and lead to several theoretical predictions. Finally, we propose that for rapid folding into well-defined conformations which carry out the biological functions, four-domain DPO4 employs a divide-and-conquer strategy, that is, combining multiple individual folding funnels into a single funnel (domains fold independently and then coalesce). In this way, the degrees of freedom for multidomain proteins are polynomial rather than exponential, and the conformational search process can be reduced effectively from a large to a smaller time scale.     

Rational design to block amino acid editing of a tRNA synthetase

Investigations in chemical biology have focused on the synthesis of custom-designed proteins with site-specific incorporation of novel amino acids. Their success requires stable production of misacylated tRNAs. Utilization of aminoacyl-tRNA synthetases has been hindered because of enzyme molecular recognition mechanisms that ensure high fidelity of protein synthesis. Leucyl-tRNA synthetase naturally misaminoacylates chemically diverse standard and nonstandard amino acids, but contains a separate amino acid editing active site to hydrolyze incorrectly mischarged tRNAs. In this work, a rational mutagenesis design to block enzyme editing is described and involves substitution of bulky amino acids into the amino acid binding pocket of the hydrolytic active site. These engineered enzymes stably misacylated isoleucine to tRNALeu. The use of these mutant leucyl-tRNA synthetases has the potential to produce pools of mischarged tRNAs that are linked to nonstandard amino acids for in vitro translation. In addition, since many of the leucyl-tRNA synthetases do not interact with or rely upon the tRNA anticodon for identity, these enzymes may offer an excellent scaffold for the development of orthogonal tRNA synthetase/tRNA pairs that can potentially be used to customize protein synthesis.     

Structural,functional, and evolutionary analysis of late embryogenesis abundant proteins (LEA) in Triticum aestivum: A detailed molecular level biochemistry using in silico approach

LEA (Late Embryogenesis Abundant) proteins are abundant in plants and play a crucial role in abiotic stress tolerance. In our work, we primarily focused on the variations in physiochemical properties, conserved domains, secondary structure, gene ontology and evolutionary relationships among 40 LEA proteins of Triticum aestivum (common wheat). Wheat LEA protein belongs to first 6 classes out of the 13 classes present in LEApdB, the comprehensive database for LEA proteins. Proteins belonging to each LEApdB class have structures and functions distinguished from other classes. The study found three different conserved LEA domains in Triticum aestivum. One important domain was dehydrin, present in wheat proteins of classes 1, 2 and 4, though varied in sequence level, have similar biological processes. The study also found sequence level and phylogenetic similarity between dehydrin domains of class 1 and 4, but distinct from that of LEApdB class 2. This study also demonstrated functional diversity in two class 6 proteins occurred due to many destabilizing mutations in the LEA4 domain that caused alteration of ligand binding and conformational shift from 3₁₀-helix → turn within the domain. The LEA4 domains of these proteins also showed functional similarity and evolutionary relatedness with three other proteins of genus Aegilops, denoting that these proteins in Triticum aestivum were derived from its ancestor Aegilops. The study also assigned LEApdB class 4 to an unclassified LEA protein ‘WZY2-1’ based on amino acid composition, conserved domain, motif architecture and phylogenetic relatedness with class 4 proteins. Our study has revealed a detailed analysis of LEA proteins in Triticum aestivum and can serve as a pillar for further investigations and comparative analysis of wheat LEA proteins with other cereal or plant types.     

A sensitive fluorescence monitor for the detection of activated Ras: total chemical synthesis of site-specifically labeled Ras binding domain of c-Raf1 immobilized on a surface

BACKGROUND: The Ras.GDP-Ras.GTP cycle plays a central role in eukaryotic signaling cascades. Mutations in Ras which stabilize activated Ras.GTP lead to a continuous stimulation of downstream effectors and ultimately to cell proliferation. Ras mutants which increase the steady-state concentration of Ras.GTP are involved in about 30% of all human cancers. It is therefore of great interest to develop a biosensor which is sensitive to Ras.GTP but not to Ras.GDP. RESULTS: The Ras binding domain (RBD) of c-Raf1 was synthesized from two unprotected peptide segments by native chemical ligation. Two fluorescent amino acids with structures based on the nitrobenz-2-oxa-1,3-diazole and coumaryl chromophores were incorporated at a site which is close to the RBD/Ras.GTP binding surface. Additionally, a C-terminal tag consisting of His6 was introduced. The Kd values for binding of the site-specifically modified proteins to Ras.GTP are comparable to that of wild-type RBD. Immobilization of C-terminal His6 tag-modified fluorescent RBD onto Ni-NTA-coated surfaces allowed the detection of Ras.GTP in the 100 nM range. Likewise, Ras.GTP/Q61L (an oncogenic mutant of Ras with very low intrinsic GTP hydrolysis activity) can also be detected in this assay system. Ras.GDP does not bind to the immobilized RBD, thus allowing discrimination between inactive and activated Ras. CONCLUSIONS: The site-specific incorporation of a fluorescent group at a strategic position in a Ras effector protein allows the detection of activated Ras with high sensitivity. This example illustrates the fact that the chemical synthesis of proteins or protein domains makes it possible to incorporate any kind of natural or unnatural amino acid at the position of choice, thereby enabling the facile preparation of specific biosensors, enhanced detection systems for drug screening, or the synthesis of activated proteins, e.g. phosphorylated proteins involved in signaling pathways, as defined molecular species.     

Self-assembly and morphological characterization of two-component functional amyloid proteins

Functional amyloid has been increasingly applied as self-assembling nanostructures to construct multifunctional biomaterials. However, little has been known how different side domains, varied fusion positions and subunits affect self-assembly and morphologies of amyloid fibrils. Here, we constructed three groups of two-component amyloid proteins based on CsgA, the major protein components of Escherichia coli biofilms, to bridge these gaps. We showed that all fusion proteins have amyloid features, as indicated by Congo red assay. Atomic force microscopy (AFM) indeed reveals that these fusion proteins are able to self-assemble into fibrils, with an average diameter of 0.5-2 nm and length of hundreds of nanometers to several micrometers. The diameter of fibrils increases with the increase of the molecular weight of fusion domains, while the dynamic assembly of recombinant proteins was delayed as a result of the introduction of fusion domains. Moreover, fusion of the same functional domains but at intermediate position seems to cause the most interference on fibril assembly compared with those fused at C or Nterminus, as mainly short and irregular fibrils were detected. This phenomenon appears more pronounced for randomly coiled mussel foot proteins (Mfps) than for rigid chitin-binding domain (CBD). Finally, increase of the molecular weight of tandem repeats in protein monomer seemed to increase the fibril diameter of the resultant fibrils, but either reduction of the tandem repeats of CsgA to one single belta-sheet loop or increase in the number of tandem repeats of CsgAs from one to four produced shorter and intermittent fibrils compared with CsgA control protein. These studies therefore provide insights into self-assembly of two-component amyloid proteins and lay the foundation for rational design of multifunctional molecular biomaterials.     

Synthesis of a negatively charged dibenzofuran-based beta-turn mimetic and its incorporation into the WW miniprotein-enhanced solubility without a loss of thermodynamic stability

A versatile synthesis has been developed to functionalize the 4-(2-aminoethyl)-6-dibenzofuran propionic acid residue (1a) at the 2 and 8 positions with a variety of different substructures. The unfunctionalized version of this peptidomimetic (1a) is known to facilitate beta-hairpin formation in a variety of small peptides and proteins in aqueous solution when incorporated in place of the i + 1 and i + 2 residues of a beta-turn. In this study, we append propionate substituents on 1a at the 2 and 8 positions to successfully overcome solubility problems encountered with the incorporation of 1a in place of the i + 1 and i + 2 residues of the beta-turn in loop 1 of the WW domain. The thermodynamic stability of several WW domain analogues incorporating residues 1a and 1b was compared to that of the wild-type sequence revealing comparable DeltaG(H(2)O) unfolding values at 4 degrees C ranging from 3 to 3.6 kcal/mol. WW domains incorporating residue 1b exhibit improved solubility (exceeding 100 microM) and resistance to aggregation without compromising thermodynamic stability.     

Biochemical characterization of peptidyl carrier protein (PCP), the thiolation domain of multifunctional peptide synthetases

Background: A structurally diverse group of bioactive peptides is synthesized by peptide synthetases which act as templates for a growing peptide chain, attached to the enzyme via a thloester bond. The protein templates are composed of distinctive substrate-activating modules, whose order dictates the primary structure of the corresponding peptide product. Each module contains defined domains that catalyze adenylation, thioester and peptide bond formation, as well as substrate modifications. To show that a putative thiolation domain (PCP) is involved in covalent binding and transfer of amino aryl residues during non-ribosomal peptide synthesis, we have cloned and biochemically characterized that region of tyrocidine synthetase 1, TycA.Results: The 327-bp gene fragment encoding PCP was cloned using its homology to the genes for the acyl carrier proteins of fatty acid and polyketide biosynthesis. The protein was expressed as a His₆, fusion protein, and purified in a single step by affinity chromatography. Incorporation of β-[³H]alanine, a precursor of coenzyme A, demonstrated the modification of PCP with the cofactor 4′-phosphopantetheine. When an adenylation domain is present to supply the amino adenylate moiety, PCP can be acylated in vitro.Conclusions: PCP can bind covalently to the cofactor phosphopantetheine and can subsequently be acylated, strongly supporting the multiple carrier model of non-ribosomal peptide synthesis. The adenylation and thiolation domains can each act as independent multifunctional enzymes, further confirming the modular structure of peptide synthees, and can also perform sequential steps in trans, as do multienzyme complexes.     

Explorations of catalytic domains in non-ribosomal peptide synthetase enzymology

Covering up to the end of 2011Many pharmaceuticals on the market today belong to a large class of natural products called nonribosomal peptides (NRPs). Originating from bacteria and fungi, these peptide-based natural products consist not only of the 20 canonical l-amino acids, but also non-proteinogenic amino acids, heterocyclic rings, sugars, and fatty acids, generating tremendous chemical diversity. As a result, these secondary metabolites exhibit a broad array of bioactivity, ranging from antimicrobial to anticancer. The biosynthesis of these complex compounds is carried out by large multimodular megaenzymes called nonribosomal peptide synthetases (NRPSs). Each module is responsible for incorporation of a monomeric unit into the natural product peptide and is composed of individual domains that perform different catalytic reactions. Biochemical and bioinformatic investigations of these enzymes have uncovered the key principles of NRP synthesis, expanding the pharmaceutical potential of their enzymatic processes. Progress has been made in the manipulation of this biosynthetic machinery to develop new chemoenzymatic approaches for synthesizing novel pharmaceutical agents with increased potency. This review focuses on the recent discoveries and breakthroughs in the structural elucidation, molecular mechanism, and chemical biology underlying the discrete domains within NRPSs.     

Studies on the insolubility of a transmembrane peptide from signal peptide peptidase

We have undertaken fundamental studies on the solubility properties of a peptide derived from the fourth transmembrane (TM) domain of signal peptide peptidase, a 7-TM intramembrane-cleaving protease. We have found that by disfavoring secondary structure formation we are able to greatly improve the solubility, handling, and purification properties of this peptide. Our findings suggest that preventing secondary structure formation by reversible modification of the polypeptide backbone of hydrophobic transmembrane peptides may be a useful strategy for the total chemical protein synthesis of integral membrane proteins.     

Complete NMR Spectroscopic Assignment of a Neuronal Transduction Protein

Summary.  PDZ domains are found in a wide array of proteins possessing various biological functions like clustering membrane proteins, organizing signal transduction complexes, and maintaining cell polarity. This report presents a complete chemical shift assignment of the PDZ domain of neuronal nitric oxide synthase. The secondary structure based on C_α and C_β chemical shifts is presented. Received June 6, 2001. Accepted (revised) October 4, 2001     

Late-Stage Functionalisation of Peptides on the Solid Phase by an Iodination-Substitution Approach

The functionalisation of peptides at a late synthesis stage holds great potential, for example, for the synthesis of peptide pharmaceuticals, fluorescent biosensors or peptidomimetics. Here we describe an on-resin iodination-substitution reaction sequence on homoserine that is also suitable for peptide modification in a combinatorial format. The reaction sequence is accessible to a wide range of sulfur nucleophiles with various functional groups including boronic acids, hydroxy groups or aromatic amines. In this way, methionine-like thioethers or thioesters and thiosulfonates are accessible. Next to sulfur nucleophiles, selenols, pyridines and carboxylic acids were successfully used as nucleophiles, whereas phenols did not react. The late-stage iodination-substitution approach is not only applicable to short peptides but also to the more complex 34-amino-acid WW domains. We applied this strategy to introduce 7-mercapto-4-methylcoumarin into a switchable Zn^II responsive WW domain to design an iFRET-based Zn^II sensor.     

Synthetic inhibitors of proline-rich ligand-mediated protein-protein interaction: potent analogs of UCS15A

The proline-rich motif in proteins is known to function as a ligand sequence that binds to protein modules such as SH3, WW, and several other protein interaction domains. These proline-rich ligand-mediated protein-protein interactions (abbreviated PLPI) are important in many signaling pathways that are involved in various diseases. Our previous studies showed that UCS15A, produced by Streptomyces species, inhibited PLPI. Here we report on synthetic analogs of UCS15A that show more potent activity than UCS15A in inhibiting PLPI. A synthetic analog, compound 2c, blocked in vitro PLPI of Sam68-Fyn-SH3 as well as in vivo PLPI of Grb2-Sam68 and Grb2-Sos1. Activation of MEK was also inhibited by compound 2c. Unlike UCS15A, compound 2c was an order of magnitude less cytotoxic and did not cause morphological changes in treated cells.     

Fragment density functional theory calculation of NMR chemical shifts for proteins with implicit solvation

Fragment density functional theory (DFT) calculation of NMR chemical shifts for several proteins (Trp-cage, Pin1 WW domain, the third IgG-binding domain of Protein G (GB3) and human ubiquitin) has been carried out. The present study is based on a recently developed automatic fragmentation quantum mechanics/molecular mechanics (AF-QM/MM) approach but the solvent effects are included by using the PB (Poisson-Boltzmann) model. Our calculated chemical shifts of (1)H and (13)C for these four proteins are in excellent agreement with experimentally measured values and represent clear improvement over that from the gas phase calculation. However, although the inclusion of the solvent effect also improves the computed chemical shifts of (15)N, the results do not agree with experimental values as well as (1)H and (13)C. Our study also demonstrates that AF-QM/MM calculated results accurately reproduce the separation of α-helical and β-sheet chemical shifts for (13)C(α) atoms in proteins, and using the (1)H chemical shift to discriminate the native structure of proteins from decoys is quite remarkable.