Positioning and alignment of lipid tubules on patterned Au substrates

This paper presents a method for positioning and aligning self-assembled tubules of 1,2-bis(tricosa-10,12-diynoyl)-sn-glycero-3-phosphochloline (DC(8,9)PC) by withdrawing a patterned Au substrate from tubule solution. The patterned Au substrates with alternating bare Au stripes and thiol monolayer stripes are formed by microcontact printing. We find that the lipid tubules selectively adsorb on the bare Au stripes but show no orientation order. By withdrawing the patterned Au substrates at the direction along the stripes from tubule solution, the lipid tubules are found to be aligned along the direction of the Au stripes. The angular distribution and the density of the aligned lipid tubules depend on the withdrawal rates and the adsorption time, respectively. We conclude that forces causing tubule alignment that originate in the surface tension associated with the moving meniscus dominate alignment forces exerted by the patterned Au substrates.     

Photoelectrochemical Immunosensor Array Based on Thioglycolic Acid Capped CdS Quantum Dots for Multiplexed Detection of Veterinary Drug Residues

A photoelectrochemical immunosensor based on multi‐electrode array was developed for simultaneous and sensitive determination of veterinary drug residues. In this system, poly(dimethyldiallylammonium chloride) (PDDA), Au nanoparticles (Au NPs) and thioglycolic acid (TGA)‐capped CdS quantum dots (QDs) were layer‐by‐layer assembled onto the home‐made Au electrode array. The assembling process of the (CdS/PDDA/Au NPs/PDDA)_n multilayer was characterized by electrochemical impedance spectroscopy. And then the antibodies for clenbuterol (CB), ractopamine (RAC) and chloramphenicol (CAP) were covalently immobilized onto the Au electrode array by 1‐ethyl‐3‐(3‐dimethylaminopropyl) carbodiimide (EDC) coupling reaction, respectively. The concentrations of CB, RAC and CAP were measured based on the photoelectrochemical effects of CdS QDs. Under the optimal conditions, the limits of detection (LOD) for CB, RAC and CAP were 25, 50 and 2.2 pg/mL (3Δ), respectively, with acceptable recovery over the range of 95.40%–105.5% in pig liver samples. All results indicate that the immunosensor array system has potential application for practical, effective and high throughput analysis of veterinary drugs residues.     

Gold nanoparticle self-assembly in two-component lipid Langmuir monolayers

Self-assembly processes are considered to be fundamental factors in supramolecular chemistry. Langmuir monolayers of surfactants or lipids have been shown to constitute effective 2D "templates" for self-assembled nanoparticles and colloids. Here we show that alkyl-coated gold nanoparticles (Au NPs) adopt distinct configurations when incorporated within Langmuir monolayers comprising two lipid components at different mole ratios. Thermodynamic and microscopy analyses reveal that the organization of the Au NP aggregates is governed by both lipid components. In particular, we show that the configurations of the NP assemblies were significantly affected by the extent of molecular interactions between the two lipid components within the monolayer and the monolayer phases formed by each individual lipid. This study demonstrates that multicomponent Langmuir monolayers significantly modulate the self-assembly properties of embedded Au NPs and that parameters such as the monolayer composition, surface pressure, and temperature significantly affect the 2D nanoparticle organization.     

Transformation of a close-packed Au nanoparticle/polymer monolayer into a large area array of oriented Au nanowires via E-beam promoted uniaxial deformation and room temperature sintering

Transformation of 2D Au nanoparticle (NP) arrays into large scale, ordered, and oriented nanorod/nanowire arrays supported on a transferrable polymer film has been accomplished. E-beam irradiation followed by room temperature aging of a suspended Au NP/polymethylmethacrylate (PMMA) polymer close packed monolayer results in one-dimensional nanoparticle aggregation, reorientation, and sintering into a high density array of oriented Au nanowires with coherent single-crystal-like interfaces. Molecular dynamics simulations of alkane-thiol capped Au NPs, interacting through the Vincent potential and undergoing 2D Poisson compression, account semiquantitatively for the qualitative features of the transformation. This fabrication approach should be extendable to directing 1D aggregation of highly anisotropic nanostructures in arbitrary NP systems.     

Influence of hydrophobic alkylated gold nanoparticles on the phase behavior of monolayers of DPPC and clinical lung surfactant

The effect of hydrophobic alkylated gold nanoparticles (Au NPs) on the phase behavior and structure of Langmuir monolayers of dipalmitoylphosphatidylcholine (DPPC) and Survanta, a naturally derived commercial pulmonary surfactant that contains DPPC as the main lipid component and hydrophobic surfactant proteins SP-B and SP-C, has been investigated in connection with the potential implication of inorganic NPs in pulmonary surfactant dysfunction. Hexadecanethiolate-capped Au NPs (C(16)SAu NPs) with an average core diameter of 2 nm have been incorporated into DPPC monolayers in concentrations ranging from 0.1 to 0.5 mol %. Concentrations of up to 0.2 mol % in DPPC and 16 wt % in Survanta do not affect the monolayer phase behavior at 20 °C, as evidenced by surface pressure-area (π-A) and ellipsometric isotherms. The monolayer structure at the air/water interface was imaged as a function of the surface pressure by Brewster angle microscopy (BAM). In the liquid-expanded/liquid-condensed phase coexistence region of DPPC, the presence of 0.2 mol % C(16)SAu NPs causes the formation of many small, circular, condensed lipid domains, in contrast to the characteristic larger multilobes formed by pure lipid. Condensed domains of similar size and shape to those of DPPC with 0.2 mol % C(16)SAu NPs are formed by compressing Survanta, and these are not affected by the C(16)SAu NPs. Atomic force microscopy images of Langmuir-Schaefer-deposited films support the BAM observations and reveal, moreover, that at high surface pressures (i.e., 35 and 45 mN m(-1)) the C(16)SAu NPs form honeycomb-like aggregates around the polygonal condensed DPPC domains. In the Survanta monolayers, the C(16)SAu NPs were found to accumulate together with the proteins in the liquid-expanded phase around the circular condensed lipid domains. In conclusion, the presence of hydrophobic C(16)SAu NPs in amounts that do not influence the π-A isotherm alters the nucleation, growth, and morphology of the condensed domains in monolayers of DPPC but not of those of Survanta. Systematic investigations of the effect of the interaction of chemically defined NPs with the lipid and protein components of lung surfactant on the physicochemical properties of surfactant films are pertinent to understanding how inhaled NPs impact pulmonary function.     

Maximizing the Catalytic Activity of Nanoparticles through Monolayer Assembly on Nitrogen‐Doped Graphene

We report a facile method for assembly of a monolayer array of nitrogen‐doped graphene (NG) and nanoparticles (NPs) and the subsequent transfer of two layers onto a solid substrate (S). Using 3 nm NiPd NPs as an example, we demonstrate that NiPd‐NG‐Si (Si=silicon wafer) can function as a catalyst and show maximum NiPd catalysis for the hydrolysis of ammonia borane (H₃NBH₃, AB) with a turnover frequency (TOF) of 4896.8 h^?1 and an activation energy (E_a) of 18.8 kJ mol^?1. The NiPd‐NG‐S catalyst is also highly active for catalyzing the transfer hydrogenation from AB to nitro compounds, leading to the green synthesis of quinazolines in water. Our assembly method can be extended to other graphene and NP catalyst materials, providing a new 2D NP catalyst platform for catalyzing multiple reactions in one pot with maximum efficiency.     

Aurophilicity-coordination interplay in the design of cyano-bridged nickel(II)-Gold(I) bimetallic assemblies: structural and computational studies of the gold(I)-gold(I) interactions

Two polymorphic cyano-bridged Au(I)-Ni(II) bimetallic complexes of formulas [Ni(en)2Au(CN)2][Au(CN)2] (1) and [Ni(en)2[Au(CN)2]2] (2) have been prepared from the 1:2 reaction between [Au(CN)2]- and either [Ni(en)2Cl2]Cl or [Ni(en)3]Cl2.2H2O, respectively. The structure of 1 consists of polymeric cationic chains of alternating [Au(CN)2]- and [Ni(en)2]2+ units running along the a axis and [Au(CN)2]- anions lying between the chains. The noncoordinated dicyanoaurate anions are aligned perpendicular to the ac plane and involved in aurophilic interactions with the bridging dicyanoaurate groups, ultimately leading to a 2D bimetallic grid. The structure of 2 consists of trinuclear molecules made of two [Au(CN)2]- anions linked to [Ni(en)2]2+ unit in trans configuration. Trinuclear units are joined by aurophilic interactions to form 1D zigzag chains. The magnetic properties of these compounds are strongly dominated by the local anisotropy of the octahedral Ni(II) ions, thus indicating that the magnetic exchange interaction mediated by dicyanoaurate bridging groups, if it exists, is very weak. To get insight into the electronic properties of the inter- and intramolecular interactions of the [Au(CN)2]- building blocks, the structures of different aggregates of dicyanogold units were optimized and then analyzed by making use of atoms-in-molecules (AIM) theory. Moreover, bond indices were calculated by methods based upon nonlinear population analysis.     

Fabrication of dialkyldimethylammonium/vanadium oxide gel hybrid Langmuir-Blodgett membranes

A hybrid Langmuir-Blodgett (LB) membrane of dialkyldimethylammonium (DCnA, n=12?18) and vanadium oxide gel was fabricated by compressing a DC _n A monolayer on an aqueous vanadium oxide solution. The vanadium oxide gel effectively aggregated in situ as a monolayer on the LB trough and stabilized the ammonium monolayer by electrostatic interaction. The hybrid LB monolayer, transferred onto a silicon wafer, had a smooth surface, with less than 1-nm roughness over a 1 μm × 1 μm square area. Multilayered membranes, prepared by repeated transfer of monolayers, showed sharp XRD patterns, assigned as an ordered bilayer-type structure with 2.9–4.8 nm thickness.     

Side-on liquid crystal polyacrylate in Langmuir-Blodgett films

A side-on fixed liquid crystal polyacrylate has been investigated in Langmuir and Langmuir-Blodgett (LB) films. High in-plane orientation of the mesogenic groups has been observed within the LB multilayers, showing the ability of the LB technique to align a liquid crystal. The analysis of the in-plane order versus the dipping speed suggests some self-aggregation of the polymer in the monolayer. Within these aggregates, the molecular orientation (in-plane and out-plane) has been deduced from infrared dichroism experiments; the mesogenic group lies mainly parallel to the dipping direction and relatively flat on the substrate. This alignment of the polymer is however partially lost with time, leading to materials with less in-plane anisotropy.     

QCM and EC-SPR Studies of Cytochrome cSelf-assembled on Au Electrode and Enhancement of SPR Signal by Au Nanoparticles

Quartz crystal microbalance(QCM) and cyclic voltammetry(CV) were used to characterize the monolayer of cytochrome c(Cyt c), which was adsorbed on gold film modified with alkanethiol mixed monolayer. A direct comparison of protein surface coverages calculated from QCM and cyclic voltammetric measurements illustrates that the ratio of the electroactive Cyt c to the total surface-confined Cyt cis 34%, which suggests that the orientation is a main factor affecting the electroactivity of Cyt c. Moreover, surface plasmon resonance(SPR) measurement combined with CV “in situ” was used to investigate the conformational change of Cyt c in the redox process. Besides, Au nanoparticles(Au NPs) were adsorbed on the surface of Cyt c. The result indicates that Au NPs promote electron transfer between Cyt c and the gold electrode, and SPR result suggests Au NPs enhance SPR signal.     

Langmuir‐Blodgett Films of Alkanethiolate Gold Nanorods

Colloidal multilayers of octadecanethiol‐capped Au nanorods were prepared using the Langmuir‐Blodgett technique. Uniform growth of the films with increasing number of deposition has been observed. Vertical transfer efficiency indicates efficient transfer for immersion of hydrophobic substrates and poor transfer for emersion of such substrates. The vertically transferred film has an order parameter S = 0.027, which suggests that the orientation of the nanorods in the film is somewhat isotropic about the dipping direction. Horizontal transfer of the Langmuir monolayer on Formvar/carbon‐coated Cu grids, however, gave scattered domains of Au nanorods aligned in parallel stacks. Such behavior is probably related to the rigidity of the Langmuir monolayer.     

Adsorption of carboxylate-modified gold nanoparticles on an octadecylamine monolayer at the air/liquid interface

Gold nanoparticles (Au NPs) were prepared and surface-modified by mercaptosuccinic acid (MSA) to render a surface with carboxylic acid groups (MSA-Au). Octadecylamine (ODA) was used as a template monolayer to adsorb the Au NPs dispersed in the subphase. The effect of MSA concentration on the incorporation of Au NPs on the ODA monolayer and the relevant behavior of the mixed monolayer were studied using the pressure-area (pi-A) isotherm and transmission electron microscopy (TEM) observations. The experimental results showed that the adsorbed density of Au NPs is low without the surface modification by MSA. When MSA was added into the Au NP-containing subphase, the incorporation amount of Au NPs increased with increasing MSA concentration up to approximately 1 x 10-5 M for the particle density of 1.3 x 1011 particles/mL. With a further increase in the MSA concentration, the adsorbed particle density decreases due to competitive adsorption between the free MSA molecules and the MSA-Au NPs. It is inferred that free MSA molecules adsorb more easily than the MSA-Au NPs on the ODA monolayer. Therefore, an excess amount of MSA present in the subphase is detrimental to the incorporation of gold particles. The study on the monolayer behavior also shows that the pi-A isotherm of the ODA monolayer shifts right when small amounts of Au NPs or free MSA molecules are incorporated. However, when larger amounts of particles are adsorbed at the air/liquid interface, a left shift of the pi-A isotherm appears, probably due to the adsorption of ODA molecules onto the particle surface and the transferring of the particles from beneath the ODA monolayer to the air/water interface. According to the present method, it is possible to prepare uniform particulate films of controlled densities by controlling the particle concentration in the subphase, the MSA concentration, and the surface pressure of a mixed monolayer.     

银/金纳米线阵列表面增强拉曼基底的制备及对孔雀石绿的高灵敏度检测

利用种子介导的软模板生长方法制备了金纳米线(Au NWs)阵列, 通过调节生长温度控制Au NWs阵列的形貌, 最后在经硼氢化钠(NaBH₄)清洗过的Au NWs阵列上化学沉积银纳米颗粒(Ag NPs), 制得银/金纳米线(Ag/Au NWs)阵列作为表面增强拉曼散射(SERS)基底. 选用罗丹明6G(R6G)作为拉曼探针分子测定了Ag/Au NWs阵列的SERS性能. 结果表明, Ag/Au NWs阵列作为SERS基底具有高灵敏度、 优异的信号均匀性和良好的稳定性. 使用Ag/Au NWs阵列对孔雀石绿(MG)检测的检出限可低至1×10^-8 mol/L, 线性范围为 1×10^-8~1×10^-4 mol/L. NaBH₄可以在不影响SERS性能的情况下去除Ag/Au NWs阵列上吸附的分子, 使得 SERS基底可以重复使用. 使用Ag/Au NWs阵列对湖水中的MG进行检测, 得到了可靠的回收率, 证明Ag/Au NWs 阵列在检测环境水体中的孔雀石绿上具有应用潜力.     

Electrochemically controlled assembly and logic gates operations of gold nanoparticle arrays

The reversible assembly of β-cyclodextrin-functionalized gold NPs (β-CD Au NPs) is studied on mixed self-assembled monolayer (SAM), formed by coadsorption of redox-active ferrocenylalkylthiols and n-alkanethiols on gold surfaces. The surface coverage and spatial distribution of the β-CD Au NPs monolayer on the gold substrate are tuned by the self-assembled monolayer composition. The binding and release of β-CD Au NPs to and from the SAMs modified surface are followed by surface plasmon resonance (SPR) spectroscopy. The redox state of the tethered ferrocene in binary SAMs controls the formation of the supramolecular interaction between ferrocene moieties and β-CD-capped Au NPs. As a result, the potential-induced uptake and release of β-CD Au NPs to and from the surface is accomplished. The competitive binding of β-CD Au NPs with guest molecules in solution shifted the equilibrium of the complexation-decomplexation process involving the supramolecular interaction with the Fc-functionalized surface. The dual controlled assembly of β-CD Au NPs on the surface enabled to use two stimuli as inputs for logic gate activation; the coupling between the localized surface plasmon, associated with the Au NP, and the surface plasmon wave, associated with the thin metal surface, is implemented as readout signal for "AND" logic gate operations.     

Macroscopic alignment of graphene stacks by Langmuir-Blodgett deposition of amphiphilic hexabenzocoronenes

We present structural studies of Langmuir (L) and Langmuir-Blodgett (LB) films of new amphiphilic hexa-peri-hexabenzocoronene (HBC) discotics, carrying five branched alkyl side chains and one polar group. The polar group is either a carboxylic acid moiety or an electron acceptor moiety (anthraquinone). Grazing-incidence X-ray diffraction (GIXD) and X-ray reflectivity, both utilizing synchrotron radiation, show that these amphiphilic HBCs form well-defined Langmuir monolayers at the air-water interface, with a pi-stacked columnar structure where the HBC cores are rotated around the surface normal and tilted relative to the water surface. The intercolumnar distance is 20 A. The HBCs are confined to a layer lying on top of the layer of polar groups that are in contact with the water subphase. Efficient transfer of the monolayer of the anthraquinone-substituted HBC derivative to hydrophobic quartz substrates by vertical dipping gave well-defined multilayer Y-type LB films. Polarized optical spectroscopy, GIXD, and X-ray reflectivity measurements show that the LB films consist of at least two phases. Heating the films results in an irreversible rearrangement to a single macroscopically aligned phase of hexagonally packed columns oriented along the dipping direction with disk planes perpendicular to the columnar axes and stacked in a cofacial manner. This phase transition is analogous to the reversible transition observed in the bulk material.     

Sexithiophene adlayer growth on vicinal gold surfaces

We have investigated the initial stages of vacuum-deposited sexithiophene (alpha-6T) adlayer formation on Au(111) vicinal surfaces at room temperature. The in situ scanning tunneling microscopy (STM) and photoemission spectroscopy (PES) reveal a step edge-driven growth of alpha-6T on the Au(111) vicinal surfaces that first leads to the formation of an ordered monolayer, comprising two phases with the molecular major axes aligned along the step edges. The monolayer formation is then followed by the appearance of a single-phase 2D superstructure at a two-monolayer coverage. The results highlight the potential of using vicinal metal surfaces as templates for generating organized organic nanostructures over macroscopic areas for applications in organic electronics and moletronics.     

Coordination-based gold nanoparticle layers

Gold nanoparticle (NP) mono- and multilayers were constructed on gold surfaces using coordination chemistry. Hydrophilic Au NPs (6.4 nm average core diameter), capped with a monolayer of 6-mercaptohexanol, were modified by partial substitution of bishydroxamic acid disulfide ligand molecules into their capping layer. A monolayer of the ligand-modified Au NPs was assembled via coordination with Zr4+ ions onto a semitransparent Au substrate (15 nm Au, evaporated on silanized glass and annealed) precoated with a self-assembled monolayer of the bishydroxamate disulfide ligand. Layer-by-layer construction of NP multilayers was achieved by alternate binding of Zr4+ ions and ligand-modified NPs onto the first NP layer. Characterization by atomic force microscopy (AFM), ellipsometry, wettability, transmission UV-vis spectroscopy, and cross-sectional transmission electron microscopy showed regular growth of NP layers, with a similar NP density in successive layers and gradually increased roughness. The use of coordination chemistry enables convenient step-by-step assembly of different ligand-possessing components to obtain elaborate structures. This is demonstrated by introducing nanometer-scale vertical spacing between a NP layer and the gold surface, using a coordination-based organic multilayer. Electrical characterization of the NP films was carried out using conductive AFM, emphasizing the barrier properties of the organic spacer multilayer. The results exhibit the potential of coordination self-assembly in achieving highly controlled composite nanostructures comprising molecules, NPs, and other ligand-derivatized components.     

Columnar self-assembly and alignment of planar carbenium ions in Langmuir-Blodgett films

Structural and optical properties of multilayer Langmuir-Blodgett (LB) films of two amphiphilic carbenium salts 2-didecylamino-6,10-bis(dimethylamino)-4,8,12-trioxatriangulenium hexafluorophosphate (ATOTA-1) and 2,6-bis(decylmethylamino)-10-dimethylamino-4,8,12-trioxatriangulenium hexafluorophosphate (ATOTA-2) are described. The LB films were prepared on lipophilic glass by standard vertical dipping. Grazing incidence X-ray diffraction (GIXD) measurements show that the planar organic cores, in spite of their positive charge, form closely packed columns with a repeating distance of ～3.45 ?. Specular X-ray reflectivity (SXR) reveals the LB multilayers to consist of Y-type bilayers with thickness 31 ? for ATOTA-1 and 41 ? for ATOTA-2. This significant difference is ascribed to the different packing motifs of the alkyl chains in the two LB films. GIXD and polarized UV-vis absorption and emission spectroscopy show that the columnar aggregates in the LB films are oriented along the dipping direction. This alignment is attributed to shear effects during LB transfer. The main absorption band of the LB films is blue-shifted compared to that in solution, while the fluorescence is red-shifted by more than 100 nm. These findings suggest the presence of H-aggregates in agreement with the cofacial packing derived from the X-ray measurements. Polarized absorption spectroscopy with variable angle of incidence was used to resolve two perpendicular optical transitions in the visible range, one at 460 nm polarized perpendicular to the columnar direction, in the plane of the film, and one at 420 nm polarized along the film normal.     

Using unmodified Au nanoparticles as colorimetric probes for TNT based on their competitive reactions with melamine

Gold nanoparticles(Au NPs) can serve as visualized colorimetric probes for various targets and modification-free sensing strategies are preferred.The donor–acceptor interaction between the electron-rich melamine(MA) and the electron-deficient trinitrotoluene(TNT) allows formation of a supramolecule in aqueous solution.Melamine alone makes the initially individual reddish Au NPs aggregate into gray/blue Au NP assemblies due to melamine forming multiple ligand sites toward the Au NPs.Interestingly,the preformed supramolecule of MA–TNT disenables aggregation of the Au NPs.Therefore the unmodified Au NPs provide facile colorimetric probes for TNT detection in aqueous solution.Rapid identification of TNT is established by naked eye inspection.By using spectrophotometer tools,quantification of TNT is accomplished with a linear range of 80 mmol Là1to 1.2 mmol Là1and a limit of detection(LOD) of 27 mmol Là1.In contrast to previous strategy with surface-modified Au NPs,here a modification-free sensing strategy for TNT assay has been developed with greater convenience,rapidity,and cost-effectiveness.     

The nature of alkanethiol self-assembled monolayer adsorption on sputtered gold substrates

A detailed study of the self-assembly and coverage by 1-nonanethiol of sputtered Au surfaces using molecular resolution atomic force microscopy (AFM) and scanning tunneling microscopy (STM) is presented. The monolayer self-assembles on a smooth Au surface composed predominantly of [111] oriented grains. The domains of the alkanethiol monolayer are observed with sizes typically of 5-25 nm, and multiple molecular domains can exist within one Au grain. STM imaging shows that the (4 x 2) superlattice structure is observed as a (3 x 2) structure when imaged under noncontact AFM conditions. The 1-nonanethiol molecules reside in the threefold hollow sites of the Au[111] lattice and aligned along its [112] lattice vectors. The self-assembled monolayer (SAM) contains many nonuniformities such as pinholes, domain boundaries, and monatomic depressions which are present in the Au surface prior to SAM adsorption. The detailed observations demonstrate limitations to the application of 1-nonanethiol as a resist in atomic nanolithography experiments to feature sizes of approximately 20 nm.