Experimental study of dielectrophoresis and liquid dielectrophoresis mechanisms for particle capture in a droplet

This work presents a microfluidic system that can transport, concentrate, and capture particles in a controllable droplet. Dielectrophoresis (DEP), a phenomenon in which a force is exerted on a dielectric particle when it is subjected to a non-uniform electric field, is used to manipulate particles. Liquid dielectrophoresis (LDEP), a phenomenon in which a liquid moves toward regions of high electric field strength under a non-uniform electric field, is used to manipulate the fluid. In this study, a mechanism of droplet creation presented in a previous work that uses DEP and LDEP is improved. A driving electrode with a DEP gap is used to prevent beads from getting stuck at the interface between air and liquid, which is actuated with an AC signal of 200 V(pp) at a frequency of 100 kHz. DEP theory is used to calculate the DEP force in the liquid, and LDEP theory is used to analyze the influence of the DEP gap. The increment of the actuation voltage due to the electrode with a DEP gap is calculated. A set of microwell electrodes is used to capture a bead using DEP force, which is actuated with an AC signal of 20 V(pp) at a frequency of 5 MHz. A simulation is carried out to investigate the dimensions of the DEP gap and microwell electrodes. Experiments are performed to demonstrate the creation of a 100-nL droplet and the capture of individual 10-μm polystyrene latex beads in the droplet.     

Electrophoresis of a rigid sphere in a Carreau fluid normal to a large charged disk

The electrophoresis of a rigid sphere in a Carreau fluid normal to a large disk is analyzed theoretically under the conditions of low surface potential and weak applied electric field. Previous analyses are extended to the case where a disk can be charged, and a more realistic electrostatic force formula is applied. We show that the qualitative behavior of a sphere depends largely on its distance from a disk, the thickness of double layer, and the nature of a fluid. In general, the presence of a disk has the effect of increasing the conventional hydrodynamic drag on a sphere, and a decrease in the thickness of the double layer surrounding a sphere has the effect of enhancing the shear-thinning effect. However, this might not be the case if a sphere is uncharged and a disk is charged, where the osmotic pressure field and the induced charge on the sphere surface can be significant. The shear-thinning effect is important only if the thickness of double layer is sufficiently thick. This result can play a significant role in practice such as in electrophoretic deposition, where the deposition electrode is charged and the fluid medium is usually of shearing-thinning nature.     

Measuring the electrophoretic mobility of concentrated suspensions in nonaqueous media

We present a new method of measuring the electrophoretic mobility of a particle in a concentrated suspension. The method is used to measure the electrophoretic mobility of PMMA particles (diameter 10 microm) suspended in a mixture of liquid hydrocarbons. The particle volume fraction of the suspension is varied from 0 up to 0.30 and the resulting variation of the electrophoretic mobility is discussed. The suspending liquid is such that its refractive index is very close to that of the particles. Thus the suspension is almost transparent and it is possible to follow through a microscope the motion of one particle. The suspension is subjected to a low-frequency electric field (0.5 Hz). The cell containing the suspension is mounted on a piezoelectric crystal. The displacement that compensates for the particle motion (when the particle image is steady) is determined.     

Hydrodynamics of a bounded vertical film with nonlinear surface properties

The drainage of a thin liquid film with an insoluble monolayer down a vertical wall is studied. Lubrication theory is used to develop a model where the film is pinned at the top with a given thickness and the film drains into a bath at the bottom. A nonlinear equation of state is used for the surface tension and the surface viscosity is a nonlinear function of the surfactant concentration; these are appropriate for some aqueous systems. The three partial differential equations are solved via discretization in space and then the resulting differential algebraic system is solved. Results are described for a wide range of parameters, and the conditions under which the free surface is immobilized are discussed.     

N‐Linked Glycans of Chloroviruses Sharing a Core Architecture without Precedent

N‐glycosylation is a fundamental modification of proteins and exists in the three domains of life and in some viruses, including the chloroviruses, for which a new type of core N‐glycan is herein described. This N‐glycan core structure, common to all chloroviruses, is a pentasaccharide with a β‐glucose linked to an asparagine residue which is not located in the typical sequon N‐X‐T/S. The glucose is linked to a terminal xylose unit and a hyperbranched fucose, which is in turn substituted with a terminal galactose and a second xylose residue. The third position of the fucose unit is always linked to a rhamnose, which is a semiconserved element because its absolute configuration is virus‐dependent. Additional decorations occur on this core N‐glycan and represent a molecular signature for each chlorovirus.     

Recombination of ions of a dense ion plasma in a fluorine atmosphere

A new effect leading to the slowing of recombination in a weakly nonideal ion plasma is considered. The solvation of ions is included in the explanation of the results from studying a gas discharge afterglow in a fluorine atmosphere. It is shown that recombination in such a system is slowed in comparison to the standard relationships for ideal plasma. The formation and composition of cluster ions in such a medium are considered. The relationship between the variation in the kinetics of recombination and the course of the process according to a complicated mechanism with the intermediate formation of metastable cluster pairs is established. A quantitative model is built and a formula allowing us to describe the recombination rate over a wide range of parameters of the medium is obtained. It is shown that the proposed model is in good agreement with the experimental data.     

Information-theoretic approach to kinetic-energy functionals: the nearly uniform electron gas

We strengthen the connection between information theory and quantum mechanical systems using a recently developed dequantization procedure which results in a decomposition of the kinetic energy as the sum of a classical term and a purely quantum term. For the nearly uniform electron gas, we thereby approximate the noninteracting kinetic energy as the sum of the Thomas-Fermi term, which is exact for the uniform electron gas, and the Weizsäcker term, which is proportional to the Fisher information. Electron correlation is included via a nonlocal analytical expression which is a functional of the (N-1)-conditional probability density. This expression is evaluated via a statistically rigorous Monte-Carlo procedure to obtain the correlation energy as a functional of the electron density. We show that this functional is well aproximated by a term which is proportional to the Shannon entropy. Thus the kinetic energy is expressed as the standard Thomas-Fermi term plus terms which are proportional to two of the cornerstones of information theory: the Fisher information, which is a measure of localization, and the Shannon entropy, which is a measure of delocalization.     

Coulometric sensors,the application of a sensor-actuator system for long-term stability in chemical sensing

We present a new type of chemical transducer, the coulometric sensor. This sensor is in fact an integrated sensor-actuator system that is able to measure the concentration of acids and bases by means of coulometric titration. An ISFET is used as the sensor to monitor the pH changes induced by the actuator, which is a gold electrode that fits closely around the ISFET's gate area. Coulometry is an absolute method and therefore the output of the new sensor is only determined by its dimensions and is not subject to changes in offset and sensitivity of the indicator electrode. It is thus expected that the operation of the sensor will be stable for a long time, so that only a one-time calibration is needed. As a first example of this new class of chemical transducers, a carbon dioxide sensor is presented. It is shown that the stability is some orders of magnitude better than that for a ‘classical” potentiometric sensor.     

Automated precolumn derivatization device to determine neurotransmitter and other amino acids by reversed-phase high-performance liquid chromatography

A device to derivatize amino acids with o-phthaldialdehyde, which is directly connected to high-performance liquid chromatographic equipment is described. Its principle is that a sample (10-500 microliters) is mixed with a reagent (containing o-phthaldialdehyde, 2-mercaptoethanol and sodium hydrogen carbonate buffer), using a peristaltic pump. This mixture is pumped into a loop of a pneumatically controlled injection valve at atmospheric pressure. When the derivatization is complete the valve switches, so that the sample is applied to a column and the amino acid derivatives are separated with a gradient of methanol-phosphate buffers. The reproducibility is such that brain perfusates or tissue extracts can be analyzed for the amino acid transmitter content and no internal standard is necessary. The major advantages of the present device are that it produces thorough mixing of reagent and sample, so that a high and constant degree of derivatization occurs (thus producing high sensitivity; less than 0.1 pmol can be detected) and its low cost.     

Design and fabrication of 2 kHz nematic liquid crystal variable retarder with reflection mode

ABSTRACT

This study proposes a simple method of designing a high-speed liquid crystal variable retarder (LCVR) with reflection mode. First, a series of simple formulas is provided for analysing the effects of tilt incidence and birefringence of the liquid crystal on the phase retardation and response time of the LCVR. Then, a reflective LCVR is fabricated to validate the theoretical analysis. Measured results show that the response speed can reach 2.7 kHz with a phase retardation of 1 λ. Furthermore, the theoretical curve is close to the measured curve while the incident angle is less than 10°. However, the theoretical and measured values show a considerable difference under a large incident angle. This problem is discussed, and a modified method is given. This work is helpful for the design and fabrication of high-speed LCVR.     

Facile Electrochemical Hydrogenation and Chlorination of Glassy Carbon to Produce Highly Reactive and Uniform Surfaces for Stable Anchoring of Thiolated Molecules

Carbon is a highly adaptable family of materials and is one of the most chemically stable materials known, providing a remarkable platform for the development of tunable molecular interfaces. Herein, we report a two‐step process for the electrochemical hydrogenation of glassy carbon followed by either chemical or electrochemical chlorination to provide a highly reactive surface for further functionalization. The carbon surface at each stage of the process is characterized by AFM, SEM, Raman, attenuated total reflectance (ATR) FTIR, X‐ray photoelectron spectroscopy (XPS), and electroanalytical techniques. Electrochemical chlorination of hydrogen‐terminated surfaces is achieved in just 5 min at room temperature with hydrochloric acid, and chemical chlorination is performed with phosphorus pentachloride at 50 °C over a three‐hour period. A more controlled and uniform surface is obtained using the electrochemical approach, as chemical chlorination is observed to damage the glassy carbon surface. A ferrocene‐labeled alkylthiol is used as a model system to demonstrate the genericity and potential application of the highly reactive chlorinated surface formed, and the methodology is optimized. This process is then applied to thiolated DNA, and the functionality of the immobilized DNA probe is demonstrated. XPS reveals the covalent bond formed to be a C?S bond. The thermal stability of the thiolated molecules anchored on the glassy carbon is evaluated, and is found to be far superior to that on gold surfaces. This is the first report on the electrochemical hydrogenation and electrochemical chlorination of a glassy carbon surface, and this facile process can be applied to the highly stable functionalization of carbon surfaces with a plethora of diverse molecules, finding widespread applications.     

Modeling of the pseudo-colloids migration for multi-member decay chains with a arbitrary flux boundary condition in a fractured porous medium

A deep geologic disposal is the prime option for the long-term isolation of high-level radioactive waste (HLW) in many countries. For deeply located repositories, a radionuclide released from a failed waste container moves through the engineered and natural barriers before it reaches a biosphere. The pseudo-colloid which a radionuclide is adsorbed on a moving natural humic or fulvic colloid can be generated in a fractured porous medium. The size of a colloid is in general in the order of a hundred nanometer so that its migration velocity in a fracture is higher than that of a radionuclide due to the hydrochromatic effect. A large colloid cannot diffuse easily into a surrounding rock. Also, there are many kinds of actinides and these actinides have decay chains. In this analysis, the canonical form solution is derived for a pseudo-colloid and a solute in a fracture and a surrounding rock with a realistic inlet boundary condition with multi-member decay chains. It is used the Fortran based a computational code which uses a special subroutine for the inversion of Laplace transform. Consequently, the role of the pseudo-colloid in the fractured porous medium is important and also their decay chains aren’t neglected in the performance assessment of the HLW.     

Self-similarity as a fundamental feature of the regression of fluctuations

An examination of the experimental behaviour of the regression of equilibrium fluctuations is made and compared with a range of theoretical models. In this basis it is suggested that the regression path is determined by a few simple rules. These are, an initial conservative-type distribution of information over a self-similar hierarchy, which is superceded eventually by a dissipative process which also proceeds in a self-similar manner. The relationship of these rules to a time-dependent evolution of the average configuration entropy is discussed and their correspondence to the fading of memory outlined. An equation of motion for the probability of realisation of the fluctuation is presented which reflects these considerations and is valid over the complete time range from initiation to equilibrium.     

On the path-dependence of the open-cell voltage of a galvanic cell involving a ternary or multinary compound with multiple mobile ionic species under multiple chemical potential gradients

It is well known that the open-cell voltage (U) of a galvanic cell involving a binary compound, or a multinary compound with a single kind of mobile ionic species, is a state property under a gradient of chemical potential of the mobile component. It is not so transparent, however, whether U is still a state property when involving a ternary or multinary compound with two or more kinds of mobile ions under multiple chemical potential gradients of those mobile components. We clarify this issue with a multinary oxide that conducts oxide ions, protons and electron holes and is exposed to the chemical potential gradients of both water and oxygen. We show that U is path- and history-dependent, and manifests itself along the diffusion paths of the two mobile components H and O under given boundary conditions.     

Development of high-temperature pulsed slit nozzle and its application to supersonic jet absorption spectrometry

A high-temperature pulsed slit nozzle, consisting of a circular pulsed nozzle and an interface to convert a circular flow into a slit flow has been constructed. The absorption spectrum is measured by scanning the wavelength of the monochromator equipped with a xenon arc lamp and by detecting the transmitted light through a jet with a photomultiplier. A rotationally cooled spectrum is clearly observed for aniline only when a long slit nozzle is employed. The absorptivity increases proportionally to the slit length at least up to 6 cm. The time for recording a spectrum is 3.5 min, which is reduced to several seconds by transmitting a white light through a jet and by measuring the spectrum with an optical multichannel analyzer. The detection limit is estimated to a partial vapor pressure of 0.4 torr for aniline. The present system can be conveniently used in routine analysis, because of a wide spectral coverage of the lamp source.     

Sedimentation of a composite particle in a spherical cavity

The boundary effect on the sedimentation of a colloidal particle is investigated theoretically by considering a composite sphere, which comprises a rigid core and an ion-penetrable membrane layer, in a spherical cavity. A pseudo-spectral method is adopted to solve the governing electrokinetic equations, and the influences of the key parameters on the sedimentation behavior of a particle are discussed. We show that both the qualitative and quantitative behaviors of a particle are influenced significantly by the presence of the membrane layer. For example, if the membrane layer is either free of fixed charge or positively charged and the surface potential of the rigid core is sufficiently high, the sedimentation velocity has a local minimum and the sedimentation potential has a local maximum as the thickness of the double layer varies. These local extrema are not observed when the membrane layer is negatively charged. If the double layer is thin, the influence of the fixed charge in the membrane layer on the sedimentation potential is inappreciable.     

Rheological properties and the mechanism of a viscous flow of aqueous pectin solutions

The rheological properties and mechanisms of a viscous flow of diluted apple pectin solutions are investigated. It is found that the rise in solution viscosity upon an increase in concentration and a drop in temperature is, along with the corresponding degree to which the interaction between pectin molecules and solvent is reduced, associated with the processes of structuring. The entropy of a viscous flow of pectin solutions is found to be positive: it grows with a rise in concentration is virtually temperature independent. It is established that the entropy factor makes the main contribution to the free energy value of a viscous flow.     

Numerical simulation of nanoparticle melting inside a matrix

A theoretical model is proposed for describing the melting of a metal nanoparticle embedded into a solid matrix. The model is based on a thermodynamic approach that takes into account matrix elasticity. The melting process is described for gold nanoparticles embedded in a solid matrix whose elastic modulus is varied in a wide range. Both spherical and ellipsoidal particles are considered. It is shown that particle melting temperature can be both higher and lower than the melting point of a bulk sample depending on the interaction intensity of the solid and liquid particle surfaces with the matrix. An increase in the shear modulus of the matrix causes a rise in the nanoparticle melting temperature, with the effect of the matrix elasticity becoming noticeable at some critical shear modulus. The conditions are revealed at which only a surface layer of a nanoparticle, the thickness of which depends on the particle radius and temperature, is melted.