2π + 2π cycloaddition kinetics of some fluoro olefins and fluoro vinyl ethers

The second order 2π + 2π homo- and co-dimerization between various classes of fluorinated olefins has been investigated. The fluorinated olefins examined in this study were: (1) R_fOCFCF₂ (perfluorinated vinyl ethers); (2) R_fCFCF₂ (perfluorinated terminal olefins); (3) RCH₂CFCF₂; (4) PhOCFCF₂ (aryl perfluorinated vinyl ethers).Homo-dimerizations between vinyl ethers have an E_a between 20 and 24 kcal mol⁻¹ while homo-dimerizations between terminal olefins have an average E_a between 35 and 40 kcal mol⁻¹; vinyl groups have a second order cyclodimerization rate constant of formation between 1 × 10⁻⁷ and 1 × 10⁻⁴ M⁻¹ S⁻¹ while vinyl ethers have a second order cyclodimerization rate constant of formation = 1 × 10⁻¹ M⁻¹ s⁻¹. If there is a CH₂ group α to the terminal olefin, the E_a of cyclodimerization is about 7 kcal mol⁻¹) lower with respect to those olefins with a CF₂ α to the instauration. At 270 °C co-dimerizations have an average ΔS^≠ = −45 cal K⁻¹ mol⁻¹ and a second order rate constant of cyclodimerization ranging between 0.1 × 10⁻⁴ M⁻¹ S⁻¹ and 16 × 10⁻⁴ M⁻¹ S⁻¹ while homo-dimerizations have an average ΔS^≠ = −17 cal K⁻¹ mol⁻¹ and a second order rate constant which can span from 7 × 10⁻⁷ M⁻¹ S⁻¹ to as much as 1 × 10⁻¹ M⁻¹ S⁻¹ depending on the electronic nature of the perfluorinated terminal olefin.A good correlation between the electronegativity χ and the activation energy E_a demonstrates that “polarizing” groups, O, PhO, α to the olefin play an important role in the formation and stabilization of the cyclodimerization biradical intermediate.     

Synthesis of α, ω perfluoropolyether iodides

Perfluoropolyether (PFPE) diacyl halides of formula XCOCF₂O[(CF₂O)_n(CF₂CF₂O)_m]_pCF₂COX, with X = Cl, F and molecular weight (MW) 400-4000 g mol⁻¹ are smoothly converted in high yields to the corresponding α, ω diiodides in the absence of solvent, employing KI or LiI at 210 °C with extrusion of CO. During the reactions, β-elimination of COF₂ from the terminal difluoromethylene oxide units (CF₂O, C₁ unit) occurs to some extent until a tetrafluoroethylene oxide unit (OCF₂CF₂, C₂ unit) is encountered yielding a OCF₂CF₂I terminus. This considerably alters the MW distribution of the final diiodide especially for low MW PFPEs. Operating in supercritical conditions of CO (scCO) or both scCO and CO₂ (scCO₂) on low (<600 g mol⁻¹) MW diacyl halides, lowers β-elimination from 95 to 52 mol% if KI is used or from 43 to 30 mol% if LiI is used. With higher MW (>600 g mol⁻¹) β-elimination is lowered from 15 to <1 mol% in scCO conditions employing KI.     

Ferrole-type compounds containing thiophenic or thiepinic rings in the 3,4-positions of the metallacycle

The new ferrole Fe₂(CO)₆[μ-η²,η⁴-(Fc)CC{C(H)C(R)S}CC(SiMe₃)] [R = SiMe₃ (1) and R = Fc (2)] and ruthenoles Ru₂(CO)₆[μ-η²,η⁴-(Me₃Si)CC{SC(Fc)C(H)}CC(Fc)] 3 and Ru₂(CO)₆[μ-η²,η⁴-(Me₃Si)CC(SCCFc)C(H)C(Fc)] 4, have been obtained from the reactions of M₃(CO)₁₂ (M = Fe, Ru) and FcCCSCCSiMe₃ through S-C bond activations and C-C coupling reactions. Thermolysis of Ru₂(CO)₆[μ₃-η²,η⁴,η³-(Me₃Si)CC{SC(Fc)C(SCCSiMe₃}Ru(CO)₃}CC(Fc)] alone and in the presence of HCCFc, yielded the compounds Ru₂(CO)₆[μ-η²,η⁴-(Me₃Si)CC{SC(Fc)C(SCCSiMe₃)}CC(Fc)] 5 and Ru₂(CO)₆[μ-η²,η⁴-(Me₃Si)CC{SC(Fc)C(SCCSiMe₃)C(H)C(Fc)}CC(Fc)] 6, respectively. The crystal structures of the compounds 1, 3, 4 and 6 are reported.     

Luminescent rhenium(I)-gold(I) hetero organometallics linked by ethynylphenanthrolines

The first luminescent rhenium(I)-gold(I) hetero organometallics, Re{phenAu(PPh₃)}(CO)₃Cl (3) and Re{(PPh₃)AuphenAu(PPh₃)}(CO)₃Cl (4), have been prepared using the gold(I) complex AuCl(PPh₃) (PPh₃ = triphenylphosphine) and the novel rhenium(I) complexes Re(phenH)(CO)₃Cl (5) (phenH = 3-ethynyl-1,10-phenanthroline) or Re(HphenH)(CO)₃Cl (6) (HphenH = 3,8-bis(ethynyl)-1,10-phenanthroline). All the present rhenium(I) complexes 3-6 were revealed to possess a facial configuration (fac-isomer) with respect to the three carbonyl ligands. The main frameworks for these new gold(I) organometallics were constructed by the Au-C σ-bonding (with the η¹-type coordination) between the ethynylphenanthrolines and the Au(I) phosphine unit. Re(I)-Au(I) heterometallics 3 and 4 have shown single phosphorescence from the ³MLCT excited state and this observation can be interpreted in terms of the efficient intramolecular energy transfer from the Au(I) unit to the Re(I) unit.     

Reactivity of [CpRh(η-C6H3NH2-2,6-i-Pr2)](OTf)2 toward phosphines and alkynes

The cationic aniline complex [Cp^∗Rh(η⁶-2,6-(Me₂CH)₂C₆H₃NH₂)](OTf)₂ (1) was prepared from either [Cp^∗Rh(η²-NO₃)(η¹-OTf)] or [Cp^∗Rh(OH₂)₃](OTf)₂ and 2,6-diisopropylaniline. Complex 1 underwent substitution with phosphines or phosphites, indicating the labile character of the η⁶-aniline ligand. Complex 1 mediated cycloaddition reactions of several alkynes in refluxing ethanol: the [2 + 2] dimerization for PhCCPh and the [2 + 2 + 1] trimerization for PhCCH and CH₃C₆H₄CCH. The unexpected cyclobutadiene complex [Cp^∗Rh(η⁴-C₄(C(O)CH₃)₂H(SiMe₃))] was obtained from complex 1 and Me₃SiCCCCSiMe₃ and structurally characterized by X-ray diffraction.     

Amberlite XAD-2 functionalized with 2-aminothiophenol as a new sorbent for on-line preconcentration of cadmium and copper

A new functionalized resin has been applied in an on-line preconcentration system for copper and cadmium determination. Amberlite XAD-2 was functionalized by coupling it to 2-aminothiophenol (AT-XAD) by means of an NN spacer. This resin was packed in a minicolumn and used as sorbent in the on-line system. Metal ions were sorbed in the minicolumn, from which it could be eluted directly to the nebulizer-burner system of the flame atomic absorption spectrometer (FAAS). Elution of Cd(II) and Cu(II) from minicolumn can be made with 0.50 mol l⁻¹ HCl or HNO₃. The enrichment factors obtained were 28 (Cd) and 14 (Cu), for 60 s preconcentration time, and 74 (Cd) and 35 (Cu), if used 180 s preconcentration time. The proposed procedure allowed the determination of cadmium and copper with detection limits of 0.14 and 0.54 μg l⁻¹, respectively, when used preconcentration periods of 180 s. The effects of foreign ions on the adsorption of these metal ions are reported. The validation of the procedure was carried out by analysis of certified reference material. This procedure was applied to cadmium and copper determination in natural, drink and tap water samples.     

Towards understanding monomer coordination in atom transfer radical polymerization: synthesis of [Cu(PMDETA)(π-M)][BPh4] (M = methyl acrylate, styrene, 1-octene, and methyl methacrylate) and structural studies by FT-IR and H NMR spectroscopy and X-ray crystallography

Cu^I complexes of the form [Cu^I(PMDETA)(π-M)][BPh₄] (where PMDETA = N,N,N′,N″,N″-pentamethyldiethylenetriamine, and M = vinyl monomer) were synthesized and isolated from solution as crystals with methyl acrylate (MA), styrene (Sty), and 1-octene (Oct). The interaction of the CC double bond of the vinyl monomer with Cu^I was characterized via FT-IR and ¹H NMR spectroscopy and single crystal X-ray crystallography. A fourth complex with methyl methacrylate (MMA) was synthesized and characterized spectroscopically, but no crystals suitable for X-ray structure analysis could be obtained. In all complexes, PMDETA acts as a tridentate ligand, while the pseudotetrahedral coordination geometry around Cu^I is completed by a π-interaction with the CC double bond of M in the presence of a non-coordinating counter-ion. A decrease in CC IR stretching frequencies of Δν(CC) = −110, −80, −109, and −127 cm⁻¹ for complexes with MA, Sty, Oct, and MMA, respectively, was observed upon coordination. No significant change in CC bond length was seen in the crystal structure for complexes with MA and Oct while a slight lengthening was observed for the Sty complex. The upfield shift of the vinyl proton resonances indicated the presence of significant π-back-bonding.     

Some complexes containing carbon chains end-capped by M(CO)2Tp′ [M = Mo, W; Tp′ = HB(pz)3, HB(dmpz)3] groups

Complexes M(CCCSiMe₃)(CO)₂Tp′ (Tp′ = Tp [HB(pz)₃], M = Mo 2, W 4; Tp′ = Tp^∗ [HB(dmpz)₃], M = Mo 3) are obtained from M(CCCSiMe₃)(O₂CCF₃)(CO)₂(tmeda) (1) and K[Tp′].Reactions of 2 or 4 with AuCl(PPh₃)/K₂CO₃ in MeOH afforded M{CCCAu(PPh₃)}(CO)₂Tp′ (M = Mo 5, W 6) containing C₃ chains linking the Group 6 metal and gold centres.In turn, the gold complexes react with Co₃(μ₃-CBr)(μ-dppm)(CO)₇ to give the C₄-bridged {Tp(OC)₂M}CCCC{Co₃(μ-dppm)(CO)₇} (M = Mo 7, W 8), while Mo(CBr)(CO)₂Tp^∗ and Co₃{μ₃-C(CC)₂Au(PPh₃)}(μ-dppm)(CO)₇ give {Tp^∗(OC)₂Mo}C(CC)₂C{Co₃(μ-dppm)(CO)₇} (9) via a phosphine-gold(I) halide elimination reaction. The C₃ complexes Tp′(OC)₂MCCCRu(dppe)Cp^∗ (Tp′ = Tp, M = Mo 10, W 11; Tp′ = Tp^∗, M = Mo 12) were obtained from 2-4 and RuCl(dppe)Cp^∗ via KF-induced metalla-desilylation reactions. Reactions between Mo(CBr)(CO)₂Tp^∗ and Ru{(CC)_nAu(PPh₃)}(dppe)Cp^∗ (n = 2, 3) afforded {Tp^∗(OC)₂Mo}C(CC)_n{Ru(dppe)Cp^∗} (n = 2 13, 3 14), containing C₅ and C₇ chains, respectively. Single-crystal X-ray structure determinations of 1, 2, 7, 8, 9 and 12 are reported.     

Ionic polymers and oligomers with expanded π-conjugation system derived from through-space interaction in piperazinium ring

Reactions of N-(2,4-dinitrophenyl)-4-arylpyridinium chlorides (aryl (Ar) = phenyl and 4-pyridyl) with piperazines caused the ring opening of the pyridinium ring and yielded polymers that consisted of 5-piperazinium-3-aryl-penta-2,4-dienylideneammonium chloride units [N(CH(R)CH₂)₂N⁺(Cl⁻)CHCHC(Ar)CHCH, RH, Me, and phenyl]. However, the same reactions occurring in the presence of piperidine yielded oligomers that consisted of 5-piperazinium-3-aryl-penta-2,4-dienylideneammonium chloride units having piperidine and/or piperazine rings at both ends. ¹H NMR spectra suggested that π-electrons of the penta-2,4-dienylideneammonium group of the polymers and the oligomers were delocalized. UV-vis measurements revealed that the π-conjugation system expanded along the polymer and oligomer chains due to the orbital interaction between electrons on the two nitrogen atoms of the piperazinium ring. Conversion of the piperazinium ring from the boat form to the chair form caused decrease in the π-conjugation length. The rate constants of the conversion of the oligomers depended on their chain lengths. The surface of pellets that were molded from the polymers and oligomers exhibited metallic luster. These polymers and oligomers underwent electrochemical oxidation in solution.     

Iron(II) and iron(III) complexes containing ethynyl thiophene fragments

The synthesis of the new complexes Cp*(dppe)FeCC2,5-C₄H₂SR (Cp* = 1,2,3,4,5-pentamethylcyclopentadienyl; dppe = 1,2-bis(diphenylphosphino)ethane; 2a, R = CCH; 2b, R = CCSi(CH₃)₃; 2c, R = CCSi(CH(CH₃)₂)₃; 3a, R = CC2,5-C₄H₂SCCH; 3c, R = CC2,5-C₄H₂SCCSi(CH(CH₃)₂)₃) is described. The ¹³C NMR and FTIR spectroscopic data indicate that the π-back donation from the metal to the carbon rich ligand increases with the size of the organic π-electron systems. The new complexes were also analyzed by CV and the chemical oxidation of 2a and 3c was carried out using 1 equiv of [Cp₂Fe][PF₆]. The corresponding complexes 2a[PF₆] and 3c[PF₆] are thermally stable, but 2a[PF₆] was too reactive to be isolated as a pure compound. The spectroscopic data revealed that the coordination of large organic π-electron systems to the iron nucleus produces only a weak increase of the carbon character of the SOMO for these new organoiron(III) derivatives.     

Polymetallation of alkenes: Formation of some complexes containing branched chain carbon-rich ligands

Reactions of {(Ph₃P)AuCC}₂CC{CCAu(PPh₃)}₂ (1b), with Co₃(μ-CBr)(μ-dppm)_n(CO)_9−2n (n = 0, 1) result in complete or partial elimination of AuBr(PPh₃) to give the complexes {(OC)₉Co₃-μ₃-CCC}₂CC{CC-μ₃-CCo₃(CO)₉}₂ (3), trans-{(OC)₇(μ-dppm)Co₃-μ₃-CCC}(HCC)CC{CCAu(PPh₃)}{CC-μ₃-CCo₃(μ-dppm)(CO)₇} (4), {(OC)₇(μ-dppm)Co₃-μ₃-CCC}₂CC(CCH){CC-μ₃-CCo₃(μ-dppm)(CO)₇} (5) and {(OC)₇(μ-dppm)Co₃-μ₃-CCC}₂CC{CCAu(PPh₃)}{CC-μ₃-CCo₃(μ-dppm)(CO)₇} (6), which have been identified by spectroscopic methods and in the cases of 3, 4 and 5, by single-crystal X-ray diffraction methods.     

A comparison between the reaction of P2Ph4 with [{Co2(CO)6}2(μ-η:μ-η-HOCH2CCCCCH2OH)] and the reaction of [Co2(μ-PPh2)2(CO)6] with HOCH2CCCCCH2OH

Reaction of P₂Ph₄ with the diyne-diol complex [{Co₂(CO)₆}₂(μ-η²:μ-η²-HOCH₂CCCCCH₂OH)] in toluene at 65 °C gives [{Co₂(μ-P₂Ph₄)(CO)₄}{Co₂(CO)₆}(μ-η²:μ-η²-HOCH₂CCCCCH₂OH)] (1). Thermolysis of 1 at 95 °C leads to [{Co₂(CO)₅}₂(μ-P₂Ph₄)(μ-η²:μ-η²-HOCH₂CCCCCH₂OH)](2) and (μ₂-PPh₂)(μ₂-CO)(CO)₇] (3). The structures of 1-3 have been established by X-ray crystallography. In 1, a pseudoequatorial P₂Ph₄ ligand bridges the cobalt-cobalt bond of a Co₂(CC)(CO)₄ unit. By contrast, in isomeric 2, a pseudoaxial P₂Ph₄ ligand spans two Co₂(CC)(CO)₅ units, a new coordination mode for [{Co₂(CO)₅L}₂(μ-η²:μ-η²-diyne)] complexes. Complex 3 arises from dehydration-cyclocarbonylation of the diyne-diol in 1 to give a 2(5H)-furanone, a process that has not been previously reported. Reaction of HOCH₂CCCCCH₂OH with [Co₂(μ-PPh₂)₂(CO)₆] at 80 °C in toluene gave [Co₃(μ-PPh₂)₃(CO)₆], [Co₂(CO)₆(μ-η²-HOCH₂CCCCCH₂OH)] and [Co₂{μ-η⁴-PPh₂C(CCCH₂OH)C(CH₂OH)CO}(μ-PPh₂)(CO)₄] (4). The regiochemistry of 4 was confirmed by X-ray crystallography.     

Synthesis and characterization of three new fluorovanadate complexes: N(C2H5)4[VOF4], N(CH3)4[VOF3Cl], N(C4H9)4[VOF3Br] and theoretical calculations of VOF4, VOF3Cl and VOF3Br ions

The reaction of VOF₃ with (C₂H₅)₄NF, (CH₃)₄NCl and (C₄H₉)₄NBr salts in anhydrous CH₃CN produced new complexes with the anion general formula [VOF₃X]⁻ in that (X = F⁻, Cl⁻, Br⁻). These were characterized by elemental analysis, IR, UV/Visible and ¹⁹F NMR spectroscopy. The optimized geometries and frequencies of the stationary point are calculated at the B3LYP/6-311G level of theory. Theoretical results showed that the VX (X = F, Cl, Br) bond length values for the [VOF₃X]⁻ in compounds 1-3 are 1.8247, 2.4031 and 2.5595 Å, respectively. Also, the VF₅ bond length values in [VOF₃X]⁻ are 1.824, 1.812 and 1.802 Å, respectively. These results reveal that the bond order for VX bonds decrease from compounds 1 to 3, while for VF₅ bonds, the bond orders increase. It can be concluded that the decrease of VX bonds lengths and the increase of VF₅ bond lengths in compounds 1-3 result from the increase of the hyperconjugation from compounds 1 to 3. Harmonic vibrational frequencies and infrared intensities for VOF₄⁻, VOF₃Cl⁻ and VOF₃Br⁻ are studied by means of theoretical and experimental methods. The calculated frequencies are in reasonable agreement with the experiment values. These data can be used in models of phosphoryl transfer enzymes because vanadate can often bind to phosphoryl transfer enzymes to form a trigonal-bipyramidal structure at the active site.     

Synthesis and some properties of binuclear ruthenocene derivatives bridged by both ethene and thiophene derivatives

Binuclear ruthenocenes bridged by ethenes and thiophene derivatives, Rc-CHCH-Z-Rc and Rc^∗-CHCH-Z-CHCH-Rc^∗ (Z = thiophene, thieno[3,2-b]thiophene, and 2,2′-bithiophene; Rc = ruthenocenyl, R^∗ = 1′,2′,3′,4′,5′-pentamethylruthenocenyl) were prepared. These complexes showed a one-step two-electron redox wave in the cyclic voltammograms, in contrast to the benzenoid-bridged dinuclear ruthenocenes. The chemical oxidation of the Rc-CHCH-Z-Rc complexes gave no stable oxidized species. The two-electron oxidized species of the Rc^∗-CHCH-Z-CHCH-Rc^∗ complexes were comparably stable and contained a fulvene-complex type structure.     

One-step CN, CO bonds cleavage and CO, CN bonds formation over supported ionic liquid in water

At ambient reaction temperature, the silica gel confined ionic liquid catalysts were perfectly combined with water as an effective catalytic system for simultaneous CN and CO bonds transformation with a TONs exceeding 300 mol mol⁻¹.     

Formation of multifunctional ligands by nucleophilic addition of alcohols and thiols to the alkyne groups in compound C5H5FeC5H4CCSCCH: Reactivity studies

The multifunctional ligands [(Z)-FcCCSC(H)C(H)XR] [X = O, R = Me (2a); X = O, R = Et (2b); X = S, R = Ph (3); X = S, R = C₆F₅ (5)] and [(Z,Z)-Fc(SR)CC(H)SC(H)C(H)SR] [R = Ph (4), C₆F₅ (6)] have been prepared through hydroalkoxylation and hydrothiolation processes of the alkyne groups in the compound FcCCSCCH 1. Reactions between compound 3 and the carbonyl metals Co₂(CO)₈, Os₃(CO)₁₀(NCMe)₂ and Fe₂(CO)₉ have allowed the synthesis of the polynuclear compounds [(Z)-{Co₂(CO)₆}(μ-η²-FcCCSC(H)C(H)SPh)] 9, [(Z)-Os₃(CO)₉(μ-CO){μ₃-η²-FcCCSC(H)C(H)(SPh)}] 10 and [(Z)-{Fe₃(CO)₉}[μ₃,η³-(CCS)-FcCCSC(H)C(H)(SPh)] 11. All the compounds have been characterized by elemental analysis, ¹H and ¹³C{¹H} NMR spectroscopy, mass spectrometry and the crystal structure of compounds [(Z)-FcCCSC(H)C(H)OMe] 2a and [{Co₂(CO)₆}₂(μ-η²:η²-FcCCSCCSiMe₃)] 7 have been solved by X ray diffraction analysis.