Comparative studies of ONNO-based ligands as ionophores for palladium ion-selective membrane sensors

Palladium sensors based on two neutral ionophores, N,N′-bis(acetylacetone) cyclohexanediamine (L₁) and N,N′-bis(o-hydroxyacetophenone)-1,2-cyclohexanediamine (L₂) for quantification of palladium ions are described. Effect of various plasticizers (o-NPOE, DBP, DEP, DOP, TBP, and CN) and anion excluder, sodium tetra phenyl borate (NaTPB) has been studied. The best performance is obtained with a membrane composition of PVC:o-NPOE:ionophore (L₁):NaTPB of 150:300:5:5 (%, w/w). The sensor exhibits significantly enhanced selectivity towards palladium ion over the concentration range 1.0 × 10⁻⁸ to 1.0 × 10⁻¹ M with a lower detection limit of 4.0 × 10⁻⁹ M and a Nernstian compliance (29.1 ± 0.3 mV decade⁻¹ of activity) within pH range 2.0-6.0 and fast response time of 10 s. Influence of the membrane composition and possible interfering ions has also been investigated on the response properties of the electrode. Fast and stable response, good reproducibility and long-term stability of the sensor are demonstrated. The sensor has been found to work satisfactorily in partially non-aqueous media up to 20% (v/v) content of methanol, ethanol and acetonitrile and could be used for a period of 4 months. Selectivity coefficients determined with fixed interference method (FIM) indicate high selectivity for palladium. The proposed electrode shows fairly good discrimination of palladium from other cations. The application of prepared sensor has been demonstrated in determination of palladium ions in spiked water sample.     

Comparative studies of neodymium (III)-selective PVC membrane sensors

Sensors based on two neutral ionophores, N,N′-bis((1H-pyrrol-2-yl)methylene)cyclohexane-1,2-diamine (L₁) and 3,3′-(cyclohexane-1,2-diylbis(azan-1-yl-1-ylidene)bis(methan-1-yl-1-ylidene)bis(5-hydroxymethyl)pyridine-2-ol) (L₂) are described for quantification of neodymium (III). Effect of various plasticizers; 2-nitrophenyloctylether (o-NPOE), dibutyl butylphosphonate (DBBP), tri-n-butyl phosphates (TBP), dioctylpthalate (DOP) and chloronapthalen (CN) and anion excluder, sodiumtetraphenylborate (NaTPB) has been studied. The membrane composition of PVC:o-NPOE:ionophore (L₁):NaTPB (w/w; mg) of 150:300:5:5 exhibited best performance. The sensor with ionophore (L₁) exhibits significantly enhanced selectivity towards neodymium (III) in the concentration range 5.0 × 10⁻⁷ to 1.0 × 10⁻² M with a detection limit of 1.0 × 10⁻⁷ M and a Nernstian compliance (19.8 ± 0.3 mV decade⁻¹ of activity) within pH range 4.0-8.0. The response time of sensor was found as 10 s. The influence of the membrane composition and possible interfering ions has also been investigated on the response properties of the electrode. The fast and stable response, good reproducibility and long-term stability of the sensor are observed. The sensor has been found to work satisfactorily in partially non-aqueous media up to 20% (v/v) content of methanol, ethanol or acetonitrile and could be used for a period of 3 months. The selectivity coefficients determined by using fixed interference method (FIM) indicate high selectivity for neodymium. The proposed electrode shows fairly good discrimination of neodymium (III) from other cations. The application of prepared sensor has been demonstrated in the determination of neodymium (III) in spiked water samples.     

Manganese (II) selective PVC based membrane sensor using a Schiff base

N,N′,N″,N′′′-1,5,8,12-tetraazadodecane-bis(salicylaldiminato)(H₂L) has been used as ionophore for preparing Mn²⁺ selective sensor. Membranes of different composition with regard to ratio of H₂L:PVC:NPOE:NaTPB have been prepared and investigated. The best performance was obtained with the membrane of composition 10:150:150:10 (H₂L:PVC:NPOE:NaTPB) (w/w; mg). This membrane generated linear potential response in the concentration range of 5.0 × 10⁻⁶ to 1.0 × 10⁻¹ M with a Nernstian slope of 30.0 mV/decade of activity and fast response time (10 s). Hydrogen ion does not effect to the performance of sensor in the pH range 3.0-6.5. The sensor was found to be sufficient selective for Mn²⁺ over a number of alkali, alkaline and heavy metal ions and could therefore be used for the determination of manganese in various samples by direct potentiometry.     

Development of electrochemical sensors for nano scale Tb(III) ion determination based on pendant macrocyclic ligands

The two macrocyclic pendant ligands 3,4,5:12,13,14-dipyridine-2,6,11,15-tetramethyl-1,7,10,16-tetramethylacrylate-1,4,7,10,13,16-hexaazacyclooctadeca-3,13-di ene (L₁) and 3,4,5:12,13,14-dipyridine-2,6,11,15-tetramethyl-1,7,10,16-tetra(2-cyano ethane)-1,4,7,10,13,16-hexaazacyclooctadeca-3,13-diene (L₂) have been synthesized and explored as neutral ionophores for preparing poly(vinylchloride) (PVC) based membrane sensors selective to Tb(III) ions. Effects of various plasticizers and anion excluders were studied in detail and improved performance was observed. The best performance was obtained for the membrane sensor having a composition of L₁: PVC:1-CN:NaTPB in the ratio of 6: 32: 58: 4 (w/w; mg). The performance of the membrane based on L₁ was compared with polymeric membrane electrode (PME) as well as with coated graphite electrode (CGE). The electrodes exhibit Nernstian slope for Tb³⁺ ions with limits of detection of 3.4 × 10⁻⁸ mol L⁻¹ for PME and 5.7 × 10⁻⁹ mol L⁻¹ for CGE. The response time for PME and CGE was found to be 10 s and 8 s, respectively. The potentiometric responses are independent of the pH of the test solution in the pH range 3.0-7.5 for PME and 2.0-8.5 for CGE. The CGE has found to work satisfactorily in partially non-aqueous media upto 30% (v/v) content of methanol, ethanol and 20% (v/v) content of acetonitrile and could be used for a period of 5 months. The CGE was used as indicator electrode in the potentiometric titration of Tb³⁺ ions with EDTA and in determination of fluoride ions in various samples. It can also be used in direct determination of Tb³⁺ ions in tap water and various binary mixtures with quantitative results.     

Comparative studies of praseodymium(III) selective sensors based on newly synthesized Schiff's bases

Praseodymium ion selective polyvinyl chloride (PVC) membrane sensors, based on two new Schiff's bases 1,3-diphenylpropane-1,3-diylidenebis(azan-1-ylidene)diphenol (M₁) and N,N′-bis(pyridoxylideneiminato) ethylene (M₂) have been developed and studied. The sensor having membrane composition of PVC: o-NPOE: ionophore (M₁): NaTPB (w/w; mg) of 150: 300: 8: 5 showed best performances in comparison to M₂ based membranes. The sensor based on (M₁) exhibits the working concentration range 1.0 × 10⁻⁸ to 1.0 × 10⁻² M with a detection limit of 5.0 × 10⁻⁹ M and a Nernstian slope 20.0 ± 0.3 mV decade⁻¹ of activity. It exhibited a quick response time as <8 s and its potential responses were pH independent across the range of 3.5-8.5.The influence of the membrane composition and possible interfering ions have also been investigated on the response properties of the electrode. The sensor has been found to work satisfactorily in partially non-aqueous media up to 15% (v/v) content of methanol, ethanol or acetonitrile and could be used for a period of 3 months. The selectivity coefficients determined by using fixed interference method (FIM) indicate high selectivity for praseodymium(III) ions over wide variety of other cations. To asses its analytical applicability the prepared sensor was successfully applied for determination of praseodymium(III) in spiked water samples.     

Organotin compounds: an ionophore system for fluoride ion recognition

Ion-selective properties were established for membrane electrodes prepared by using organotin compounds of type (L^CNRSnF₂)_n, (R = n-Bu (I), = Ph (II)) and (L^CNSnF₃)_n (III) (L^CN = C₆H₄(CH₂NMe₂)-2). Electrodes formulated with the optimized membranes containing the organotin compounds I-III as ionophores and sodium tetraphenylborate (10-30%) exhibited high selectivity for fluoride over other anions. An electrode prepared with ionophore II using dibutyl phthalate as the plasticizer and 15% sodium tetraphenylborate (NaTPB) as anion additive, possesses the best potentiometric response characteristics. It shows a detection limit of 7.9 × 10⁻⁷ M with a slope of 62.7 mV decade⁻¹ of activity in buffer solutions of pH 5.5. The interference from other anions is suppressed under this optimized measurement conditions. An entirely non-Hofmeister selectivity sequence (F⁻ > CH₃COO⁻ > Cl⁻ > I⁻ ∼ Br⁻ >ClO₄⁻ > NO₂⁻ > NO₃⁻ > SCN⁻) with remarkable preference towards fluoride is obtained. The influence on the electrode performances by anion additive was studied, and the possible response mechanism was investigated by UV-vis spectra. The electrode has been used for direct determination of fluoride in drinking mineral water with satisfactory results.     

A highly selective mercury electrode based on a diamine donor ligand

(H₂NCHMeCH₂NH₂)(H₂O)₂HgCl₂ (I) was synthesised, characterised and used for the fabrication of a potentiometric sensor for Hg²⁺ metal ions. Membrane having I as electroactive material, sodium tetraphenyl borate (NaTPB) as an anion excluder, dibutylamine (DBA) as plasticizer in PVC matrix in the percentage ratio of 10:3:150:150 (I:NaTPB:DBA:PVC) (w/w) exhibits a linear response to Hg²⁺ ions in a concentration range of 1.25 × 10⁻⁵ to 1.0 × 10⁻¹ M having a detection limit of 8.9 × 10⁻⁶ with a slope of 25 ± 0.1 mV over the pH range 6.6-9.3. Selectivity coefficients for Hg(II) relative to a number of interfering ions were investigated. The electrode is highly selective for Hg²⁺ ions over a large number of mono-, bi-, and trivalent cations. Normal interferents like Ag⁺ and Cd²⁺ do not interfere in the working of the electrode. The electrode has also been used successfully in mixtures having a 10% (v/v) methanol and acetone content without showing any considerable change in working concentration range or slope. These electrodes have been found to be chemically inert showing a fast response time of 10 s and were used over a period of 4 months with good reproducibility (s = ±0.2). The electrode was used for determination of mercury in binary mixtures with 100% recovery and thus the proposed sensor can be used for real sample analysis.     

A copper-selective electrode based on bis(acetylacetone)propylenediimine

The potentiometric response characteristics of Cu²⁺-selective electrodes based on bis(acetylacetone)propylenediimine (I) combined with anion localizing agent (sodium tetraphenyl borate (NaTPB)) and solvent mediators (dibutyl butyl phosphonate (DBBP), tri-n-butyl phosphate (TBP) and chloronaphthalene (CN)) were investigated. The best results for Cu²⁺ sensing was obtained for the electrode membrane containing PVC, I, DBBP and NaTPB in composition 5:100:200:6 (I:PVC:DBBP:NaTPB) (w/w; mg), where the electrode had a Nernstian response (30.0 mV/decade) to Cu²⁺ within the concentration range 1.0 × 10⁻⁵ to 1.0 × 10⁻¹ M and detection limit of 0.5 ppm. The operational pH range of the electrode was 3.3-7.0. Selectivity characteristic of the proposed electrode was also assessed by calculating using fixed interference method matched potential method. The sensor has been successfully used in the potentiometric titration of copper ions with EDTA.     

Synthesis,structure, optical and magnetic properties of [CrL(X)3], {L = 4′-(2-pyridyl)-2,2′:6′,2″-terpyridine; X = Cl,N3, NCS}

Three complexes of composition [CrL(X)₃], where L = 4′-(2-pyridyl)-2,2′:6′,2″-terpyridine and X = Cl⁻, N₃⁻, NCS⁻ are synthesized. They are characterized by IR, UV–Vis, fluorescence, EPR spectroscopic, and X-ray crystallographic studies. Structural studies reveal that the Cr(III) ion is coordinated by three N atoms of L in a meridional fashion. The three anions occupy the other three coordination sites completing the mer-N₃Cl₃ (1) and mer-N₃N₃ (2 and 3), distorted octahedral geometry. The Cr–N2 has a shorter length than the Cr–N1 and Cr–N3 distances and the order Cr–N(NCS⁻) < Cr–N(N₃⁻) < Cr–Cl is observed. They exhibit some of the d–d transitions in the visible and intra-ligand transitions in the UV regions. The lowest energy d–d transition follows the trend [CrLCl₃] < [CrL(N₃)₃] < [CrL(NCS)₃] consistent with the spectrochemical series. In DMF, they exhibit fluorescence having π → π^∗ character. All the complexes show a rhombic splitting as well as zero-field splitting (zfs) in X-band EPR spectra at 77 K.     

Strontium(II)-selective electrode based on a macrocyclic tetraamide

A new PVC membrane electrode based on 5,7,12,14-dibenzo-2,3,9,10-tetraoxa-1,4,8,11-tetraazacyclotetradecane (I) as an ion carrier, o-nitrophenyloctyl ether (o-NPOE) as solvent mediator and sodium tetraphenylborate (NaTPB) as lipophilic additive was fabricated and investigated as Sr²⁺-selective electrode. The best performance was exhibited by the membrane having composition 8:200:4:120 (I:o-NPOE:NaTPB:PVC). The electrode exhibited a Nernstian response for strontium ion over a wide concentration range 3.98 × 10⁻⁶ to 1.0 × 10⁻¹ M with a slope of 29.0 ± 0.1 mV/decade of concentration and a detection limit of 2.82 × 10⁻⁶ M. It showed a response time of less than 10 s and could be used for at least 3 months without any divergence in potential. The proposed electrode showed a good discriminating ability towards strontium(II) ion over a wide variety of other metal ions including alkali, alkaline earth, transition, and heavy metal ions. The electrode can be used in the pH range of 2.5-10.5 and in mixtures containing up to 35% (v/v) non-aqueous content. It was used as an indicator electrode in potentiometric titration of strontium ion against EDTA.     

Comparative studies on Tb (III)-selective PVC membrane sensors

A new terbium selective sensor based on N-(2-hydroxyphenyl)-3-(2-hydroxyphenylhydroxyphenylimino)-N-phenylbutanamidine (L₁) and N,N′-bis((1H-indole-3-yl)methylene)butane-1,4 diamine (L₂) as a ionophore is reported. Effect of various plasticizers; 2-nitrophenyloctylether (o-NPOE), dibutyl butylphosphonate (DBBP), chloronaphthelene (CN), dioctylphthalate (DOP) and tri-(2-ethylhexyl)phosphate (TEHP) with anion excluder, potassium tetrakis (p-chloropheny1)borate (KTpClPB) have been studied. The membrane with a composition of ionophore (L₁):KTpClPB:PVC:o-NPOE (w/w, %) in ratio of 3.0:5.0:30.0:62.0 exhibited enhanced selectivity towards terbium ions (III) in the concentration range of 3.5 × 10⁻⁷ to 1.0 × 10⁻² M with a detection limit of 1.2 × 10⁻⁷ M and a Nernstian slope (20.0 ± 0.5 mV dec⁻¹ activity). The sensors showed the working pH range to be 3.5-7.5 with response time of 11 s. The sensor has been found to work satisfactorily in partially non-aqueous media up to 15% (v/v) content of methanol, ethanol or acetonitrile and could be used for a period of 3 months. The selectivity coefficients indicated high selectivity for terbium (III). The fast and stable response, good reproducibility and long-term stability of the sensors were observed. The application of the sensor has been demonstrated in determination of terbium (III) ions in spiked water samples.     

Selective uranyl ion detection by polymeric ion-selective electrodes based on salphenH2 derivatives

The new ion-selective electrodes (ISEs) based on salphenH₂ derivatives such as N,N′-(propylenedioxy)benzenebis(salicylideneimine) L¹ and N,N′-4,5-(propylenedioxy)benzenebis(3,5-di-tert-butylsalicylideneimine) L² as cation carriers are developed for a uranyl ion. The combination of these new ionophores with tris(2-ethylhexyl)phosphate (TEHP) as a plasticizer particularly shows near Nernstian slope in the wide concentration range (1.0 × 10⁻⁶ to 1.0 × 10⁻² M) of UO₂²⁺ and is observed well in the pH range from 1.0 to 5.0 with a response time less than 20 s. Since the employed ionophores were confirmed to form well-defined stable 1:1 complexes with UO₂²⁺, the observed high selectivity for a uranyl ion over the other cations was attributed to the selective complexation as well as the lipophilic behavior of these ligands especially for L². The proposed electrodes offered practically low detection limit of 6.5 × 10⁻⁷ M and reasonably good end-points within experimental error were obtained when the sensor was used as an indicator electrode for the potentiometric titration.     

Copper(II) complexes of tridentate selenobisphenolate ligand in mixed ligand environments: Synthesis, crystal structure, EPR and electrochemical studies

A series of square-pyramidal copper(II) complexes, [Cu(L^Se)(N^∧N)] (H₂L^Se = seleno-bisphenolate; N^∧N = bipyridyl, phenanthroline or N,N-dimethylethylenediamine) have been synthesized and characterized by elemental analyses, magnetic measurements, IR, EPR, and electronic spectral studies. Single crystal X-ray structures of [Cu(L^Se)(bpy)]·H₂O (2), [Cu(L^Se)(phen)]·CH₂Cl₂ (3) and [Cu(L^Se)(N,N-Me₂en)] (4) showed that all the complexes have approximately square-pyramidal geometry. In complexes 2 and 3, the square plane is occupied by O(1), O(2), N(1) and N(2) and the apical position by Se atom of L^{Se 2−} ligand. The asymmetric unit of complex 4 contains two crystallographically independent discrete molecules A and B with CuN₂OSe chromophore comprising the square plane and the axial position being occupied by another phenolate oxygen atom. Complexes 2, 3 and 4 are found to be paramagnetic and EPR parameters extracted are: g_∥ = 2.232, g_⊥ = 2.069; 〈g_eff〉 = 1.95; and g_∥ = 2.232, g_⊥ = 2.083 for complexes 2, 3 and 4, respectively. Both the complexes 2 and 4 show three reduction processes: (a) a quasi-reversible reduction of Cu^II to Cu^I, (b) an irreversible reduction of Cu^I to Cu⁰ with the release of free ligand, and (c) a reduction process occurs at this coordinated ligand. They also show a well-defined quasi-reversible oxidation of Cu^II to Cu^III and an irreversible oxidation peak at ∼1.30 and 1.40 V vs. Ag/AgCl for 4 and 2, respectively, with no cathodic counterpart, and were attributed to the oxidation of the metal coordinated ligand.     

Palladium and half sandwich ruthenium(II) complexes of selenated and tellurated benzotriazoles: Synthesis, structural aspects and catalytic applications

1-(Phenylselenomethyl)-1H-benzotriazole (L¹) and 1-(4-methoxyphenyltelluromethyl)-1H-benzotriazole (L²) have been synthesized by reacting 1-(chloromethyl)-1H-benzotriazole with in situ generated nucleophiles PhSe⁻ and ArTe⁻, respectively. The complexes of L¹ and L² with Pd(II) and Ru(II)(η⁶-p-cymene) have been synthesized. Proton, carbon-13, Se-77 and/or Te-125 NMR spectra authenticate both the ligands and their complexes. The single crystal structures of L¹, L² and [RuCl(η⁶-p-cymene)(L)][PF₆] (L = L¹: 3, L = L²: 4) have been solved. The Ru-Se and Ru-Te bond lengths have been found 2.4801(11) and 2.6183(10) Å, respectively. The palladium complexes, [PdCl₂(L)] (L = L¹: 1, L = L²: 2) have been explored for Heck and Suzuki-Miyaura C-C coupling reactions. The TON values are upto 95,000. The Ru-complexes have been found promising for catalytic oxidation of alcohols (TON ∼ 7.8-9.4 × 10⁴). The complexes of telluroether ligands are as efficient catalysts as those of selenoether ones and in fact better for catalytic oxidation.     

Neutral carriers based polymeric membrane electrodes for selective determination of mercury (II)

The potentiometric response characteristics of mercury ion-selective membrane electrodes based on 2-amino-6-purinethiol (I₁) and 5-amino-1, 3, 4-thiadiazole-2-thiol (I₂) were described. Ion selectivities were tested for various plasticizers, which were used as solvent mediators to incorporate the ionophores into the membrane. Effects of experimental parameters such as membrane composition, nature and amount of plasticizers and additives, pH and concentration of internal solution on the potential response of Hg²⁺ electrodes were investigated. The best performance was obtained with the electrode having a membrane composition (w/w) of (I₁) (3.17%): PVC (31.7%): DOP (dioctylpthalate) (63.4%): NaTPB (sodium tetraphenylborate) (1.58%). The proposed electrode reveals a Nernstian response over Hg²⁺ ion in the concentration range of 7.0 × 10⁻⁸-1.0 × 10⁻¹ M with limit of detection 4.4 × 10⁻⁸ M. The electrode shows good discrimination toward Hg²⁺ ion with respect to most common cations. It shows a short response time (10 s) for whole concentration range and can be used for 2 months without any considerable divergence in potentials. For evaluation of the analytical applicability, the electrode was used in the determination of Hg²⁺ ion in different environmental and biological samples. The practical utility of the membrane electrode has also been observed in the presence of surfactants.     

Structural diversity in Cu(II), Cd(II) and Hg(II) coordination complexes with the rigid N,N′-bis(2/3-aryl)-1,4-benzenedicarboxamide ligand

The syntheses and structures of a series of metal complexes, namely Cu₂Cl₄(L¹)(DMSO)₂·2DMSO (L¹ = N,N′-bis(2-pyridinyl)-1,4-benzenedicarboxamide), 1; {[Cu(L²)_1.5(DMF)₂][ClO₄]₂·3DMF}_∞ (L² = N,N′-bis(3-pyridinyl)-1,4-benzenedicarboxamide), 2; {[Cd(NO₃)₂(L³)]·2DMF}_∞ (L³ = N,N′-bis-(2-pyrimidinyl)-1,4-benzenedicarboxamide), 3; {[HgBr₂(L³)]·H₂O}_∞, 4, and {[Na(L³)₂][Hg₂X₅]·2DMF}_∞ (X = Br, 5; I, 6) are reported. All the complexes have been characterized by elemental analysis, IR spectra and single crystal X-ray diffraction. Complex 1 is dinuclear and the molecules are interlinked through S?S interactions. In 2, the Cu(II) ions are linked through the L² ligands to form 1-D ladder-like chains with 60-membered metallocycles, whereas complexes 3 and 4 form 1-D zigzag chains. In complexes 5 and 6, the Na(I) ions are linked by the L³ ligands to form 2-D layer structures in which the [Hg₂X₅]⁻ anions are in the cavities. The L² ligand acts only as a bridging ligand, while L¹ and L³ show both chelating and bridging bonding modes. The L¹ ligand in 1 adopts a trans-anti conformation and the L² ligand in 2 adopts both the cis-syn and trans-anti conformations, whereas the L³ ligands in 3–6 adopt the trans conformation.     

Two new coordination polymers of Robson-type macrocycle bridged by perchlorate anions: Structure,electrochemistry and magnetism

Two new coordination polymers of Robson-type macrocycles, [Cu₂L¹(μ-ClO₄)₂]_∞ (1) and [Cu₂L²(μ-ClO₄)₂]_∞ (2) (where H₂L¹and H₂L² are the [2+2] condensation products of 2,6-diformyl-4-flurophenol with 1,3-diaminopropane and 2-hydroxy-1,3-diaminopropane, respectively), have been synthesized and characterized. The intriguing feature is that intermolecular perchlorato bridges occur between adjacent copper(II) centers. The cyclic voltammograms of the complexes show that each complex undergoes two pseudo-reversible processes with the half wave potentials, −0.361 V and −0.729 V for 1, and −0.372 V and −0.744 V for 2, respectively. Magnetic susceptibility was measured for 1 and 2 over a temperature range of 2–300 K. The optimized magnetic data were J = −359.6 cm⁻¹, j′ = −30 cm⁻¹ and R = 6.8 × 10⁻⁸ for 1 and J = −411 cm⁻¹, j′ = −26 cm⁻¹ and R = 2.4 × 10⁻⁷ for 2, respectively. The data reveal antiferromagnetic couplings between the copper(II) ions of intra- and intermolecular units.     

Synthesis, photophysical and electrophosphorescent properties of mononuclear Pt(II) complexes with arylamine functionalized cyclometalating ligands

Four cyclometalated Pt(II) complexes, i.e., [(L²)PtCl] (1b), [(L³)PtCl] (1c), [(L²)PtCCC₆H₅] (2b) and [(L³)PtCCC₆H₅] (2c) (HL² = 4-[p-(N-butyl-N-phenyl)anilino]-6-phenyl-2,2′-bipyridine and HL³ = 4-[p-(N,N′-dibutyl-N′-phenyl)phenylene-diamino]-phenyl-6-phenyl-2,2′-bipyridine), have been synthesized and verified by ¹H NMR, ¹³C NMR and X-ray crystallography. Unlike previously reported complexes [(L¹)PtCl] (1a) and [(L¹)PtCCC₆H₅] (2a) (HL¹ = 4,6-diphenyl-2,2′-bipyridine), intense and continuous absorption bands in the region of 300-500 nm with strong metal-to-ligand charge transfer (¹MLCT) (dπ(Pt) → π^∗(L)) transitions (ε ∼ 2 × 10⁴ dm³ mol⁻¹ cm⁻¹) at 449-467 nm were observed in the UV-Vis absorption spectra of complexes 1b, 1c, 2b and 2c. Meanwhile, with the introduction of electron-donating arylamino groups in the ligands of 1a and 2a, complexes 1b and 2b display stronger phosphorescence in CH₂Cl₂ solutions at room temperature with bathochromically shifted emission maxima at 595 and 600 nm, relatively higher quantum yields of 0.11 and 0.26, and much longer lifetimes of 8.4 and 4.5 μs, respectively. An electrochromic film of 1b-based polymer was obtained on Pt or ITO electrode surface, which suggests an efficient oxidative polymerization behavior. An orange multilayer organic light-emitting diode with 1b as phosphorescent dopant was fabricated, achieving a maximum current efficiency of 11.3 cd A⁻¹ and a maximum external efficiency of 5.7%. The luminescent properties of complexes 1c and 2c are dependent on pH value and solvent polarity, which is attributed to the protonation of arylamino units in the C^N^N cyclometalating ligands.     

Dinuclear copper(II) perchlorate complexes with 6-(benzylamino)purine derivatives: Synthesis,X-ray structure,magnetism and antiradical activity

The reactions of Cu(ClO₄)₂·6H₂O with 6-(benzylamino)purine derivatives in a stoichiometric 1:2 metal-to-ligand ratio led to the formation of penta-coordinated dinuclear complexes of the formula [Cu₂(μ-L^1–8)₄(ClO₄)₂](ClO₄)₂·nsolv, where L¹ = 6-(2-fluorobenzylamino)purine (complex 1), L² = 6-(3-fluorobenzylamino)purine (2), L³ = 6-(4-fluorobenzylamino)purine (3), L⁴ = 6-(2-chlorobenzylamino)purine (4), L⁵ = 6-(3-chlorobenzylamino)purine (5), L⁶ = 6-(4-chlorobenzylamino)purine (6), L⁷ = 6-(3-methoxybenzylamino)purine (7) and L⁸ = 6-(4-methoxybenzylamino)purine (8); n = 0–4 and solv = H₂O, EtOH or MeOH. All the complexes have been fully characterized by elemental analysis, FTIR, UV–Vis and EPR spectroscopy, and by magnetic and conductivity measurements. Variable temperature (80–300 K) magnetic susceptibility data of 1–8 showed the presence of a strong antiferromagnetic exchange interaction between two Cu(II) (S = 1/2) atoms with J ranging from −150.0(1) to −160.3(2) cm⁻¹. The compound 6·4EtOH·H₂O was structurally characterized by single crystal X-ray analysis. The Cu?Cu separation has been found to be 2.9092(8) Å. The antiradical activity of the prepared compounds was tested by in vitro SOD-mimic assay with IC₅₀ in the range 8.67–41.45 μM. The results of an in vivo antidiabetic activity assay were inconclusive and the glycaemia in pre-treated animals did not differ significantly from the positive control.     

Determination of cerium ion by polymeric membrane and coated graphite electrode based on novel pendant armed macrocycle

Plasticized membranes using 2,3,4:12,13,14-dipyridine-1,3,5,8,11,13,15,18-octaazacycloicosa-2,12-diene (L₁) and 2,3,4:12,13,14-dipyridine-1,5,8,11,15,18-hexamethylacrylate-1,3,5,8,11,13,15,18-octaazacycloicosa-2,12-diene (L₂) have been prepared and explored as Ce(III) selective sensors. Effect of various plasticizers viz. dibutylphthalate (DBP), tri-n-butylphthalate (TBP), o-nitrophenyloctylether (o-NPOE), dioctylphthalate (DOP), benzylacetate (BA) and anion excluders, sodium tetraphenylborate (NaTPB) and potassium tetrakis p-(chlorophenyl) borate was studied in detail and improved performance was observed. Optimum performance was observed for the membrane sensor having a composition of L₂:PVC:o-NPOE:KTpClPB in the ratio of 6:34:58:2 (w/w, mg). The performance of the membrane based on L₂ was compared with polymeric membrane electrode (PME) as well as with coated graphite electrode (CGE). The electrodes exhibit Nernstian slope for Ce(III) ions with limits of detection of 8.3 × 10⁻⁸ mol L⁻¹ for PME and 7.7 × 10⁻⁹ mol L⁻¹ for CGE. The response time for PME and CGE was found to be 12 s and 10 s respectively. The potentiometric responses are independent of the pH of the test solution in the pH range 3.5-7.5 for PME and 2.5-8.5 for CGE. The CGE could be used for a period of 5 months. The practical utility of the CGE has been demonstrated by its usage as an indicator electrode in potentiometric titration of oxalate and fluoride ions with Ce(III) solution. The proposed electrode was also successfully applied to the determination of fluoride ions in mouthwash solution and oxalate ions in real samples.