Phosphate-selective fluorescent sensing microspheres based on uranyl salophene ionophores

Optical dihydrogen phosphate-selective sensors that function on the basis of bulk optode principles and are based on two different uranyl salophene ionophores are reported here for the first time. The influence of the optode composition and measuring conditions such as sample pH on the optode response are characterized, along with sensor selectivity and long-term stability. Three plasticizers of different polarity are considered for optode fabrication: bis(2-ethylhexyl)sebacate (DOS), dodecyl 2-nitrophenyl ether (o-NPDDE), o-nitrophenyloctylether (o-NPOE). The compounds 9-(diethylamino)-5-(octadecanoylimino)-5H-benzo[a]phenoxazine (ETH 5294, chromoionophore I) and 9-(diethylamino)-5-[(2-octyldecyl)imino]benzo[a]phenoxazine (ETH 5350, chromoionophore III) are used as H⁺-selective fluoroionophores that also act as reference ionophores. The resulting optode-based sensors are compared with their ion-selective electrode (ISE) counterparts, and it is revealed that optodes are better suited for operation at physiological pH. The best optode performance was found for the two component optode sensors doped with ETH 5350 and phosphate ionophore(I). The linear range of these sensor was log a = −6.0 to −2.6. Dihydrogen phosphate-selective optode sensors of optimized composition are fabricated in microsphere format and preliminary measurements in diluted sheep blood samples are presented.     

Cs+ -selective membrane electrodes based on ethylene glycol-functionalized polymeric microspheres

A new strategy for improving the robustness of membrane-based ion-selective electrodes (ISEs) is introduced based on the incorporation of microsphere-immobilized ionophores into plasticized polymer membranes. As a model system, a Cs⁺-selective electrode was developed by doping ethylene glycol-functionalized cross-linked polystyrene microspheres (P-EG) into a plasticized poly(vinyl chloride) (PVC) matrix containing sodium tetrakis-[3,5-bis(trifluoromethyl)phenyl] borate (TFPB) as the ion exchanger. Electrodes were evaluated with respect to Cs⁺ in terms of sensitivity, selectivity, and dynamic response. ISEs containing P-EG and TFPB that were plasticized with 2-nitrophenyl octyl ether (NPOE) yielded a linear range from 10⁻¹ to 10⁻⁵ M Cs⁺, a slope of 55.4 mV/decade, and a lower detection limit (log a_Cs) of −5.3. In addition, these membranes also demonstrated superior selectivity over Li⁺, Na⁺, and alkaline earth metal ion interferents when compared to analogous membranes plasticized with bis(2-ethylhexyl) sebacate (DOS) or membranes containing a lipophilic, mobile ethylene glycol derivative (ethylene glycol monooctadecyl ether (U-EG)) as ionophore.     

Solid-state pH nanoelectrode based on polyaniline thin film electrodeposited onto ion-beam etched carbon fiber

An ultramicro pH sensor has been constructed based on a thin polyaniline film that was electrochemically deposited onto a carbon fiber nanometer-size electrode. The substrate nanoelectrodes were fabricated using ion-beam conically etched carbon fibers with tip diameters ranging ca. from 100 to 500 nm. The polyaniline film was deposited from HCl solution containing the aniline monomer by cycling the potential between −0.2 and +1.0 V. The electromotive force (emf) signal between the pH sensitive polyaniline-coated nanoelectrode and an Ag/AgCl reference electrode was linear over the pH range of 2.0-12.5 with a slightly super-Nernstian slope of ca. −60 mV/pH unit. Response times ranged from several sec at pHs around 7 up to 2 min at pH 12.5. The proposed pH nanoelectrode displayed high ion selectivity with respect to K⁺, Na⁺, Ca²⁺, and Li⁺, with log K_H,M values around −12 and has a working lifetime of about 20 days. Key parameters important for the pH nanoelectrode performance, including polyaniline film preparation, selectivity, response time, temperature dependence, relative coating thickness, stability, and reproducibility, have been characterized and optimized. The performance of the pH nanoelectrode was examined by measuring the pH of several real samples including body fluids (serum, urine) and low ionic strength water samples (rain, deionized and tap water). The results agreed very well with those obtained by using commercial glass pH electrodes. The proposed pH nanoelectrode demonstrated attractive properties and seems particularly promising for use under physiological conditions.     

Aluminum phosphate dispersed on a cellulose acetate fiber surface: Preparation, characterization and application for Li, Na and K separation

Cellulose acetate fibers with supported highly dispersed aluminum phosphate were prepared by reacting aluminum-containing cellulose acetate (Al₂O₃=3.5 wt.%; 1.1 mmol g⁻¹ aluminum atom per gram of the material) with phosphoric acid. Solid-state NMR spectra (CPMAS ³¹P NMR) data indicated that HPO₄²⁻ is the species present on the fiber surface. The specific concentration of acidic centers, determined by ammonia gas adsorption, is 0.50 mmol g⁻¹. The ion exchange capacities for Li⁺, Na⁺ and K⁺ ions were determined from ion exchange isotherms at 298 K and showed the following values (in mmol g⁻¹): Li⁺=0.03, Na⁺=0.44 and K⁺=0.50. The H⁺/Li⁺ exchange corresponds to the model of the ideal ion exchange with a small value of the corresponding equilibrium constant K=1.1×10⁻². Due to the strong cooperative effect, the H⁺/Na⁺ and H⁺/K⁺ ion exchange is non-ideal. These ion exchange equilibria were treated with the use of models of fixed bi- or tridentate centers, which consider the surface of the sorbent as an assemblage of polyfunctional sorption centers. Both the observed ion exchange capacities with respect to the alkaline metal ions and the equilibrium constants were discussed by taking into consideration the sequence of the ionic hydration radii for Li⁺, Na⁺ and K⁺. The matrix affinity order for the ions decreases as the hydration radii of the cations increase, i.e. Li⁺>Na⁺>K⁺. The high values of the separation factors S_Na⁺/Li⁺ and S_K⁺/Li⁺ (up to several hundred) provide quantitative separation of Na⁺ and K⁺ from Li⁺ from a mixture containing these three ions.     

Membrane electrodes for the determination of glutathione

Four glutathione (GSH)-selective electrodes were developed with different techniques and in different polymeric matrices. Precipitation-based technique with bathophenanthroline-ferrous as cationic exchanger in polyvinyl chloride (PVC) matrix was used for sensor 1 fabrication. β-Cyclodextrin (β-CD)-based technique with either tetrakis(4-chlorophenyl)borate (TpClPB) or bathophenanthroline-ferrous as fixed anionic and cationic sites in PVC matrix was used for fabrication of sensors 2 and 3, respectively.β-CD-based technique with TpClPB as fixed anionic site in polyurethane (Tecoflex) matrix was used for sensor 4 fabrication. Linear responses of 1 × 10⁻⁵ to 1 × 10⁻⁴ M and 1 × 10⁻⁶ to 1 × 10⁻³ M with slopes of 37.5 and 32.0 mV/decade within pH 7-8 were obtained by using electrodes 1 and 3, respectively. On the other hand, linear responses of 1 × 10⁻⁵ to 1 × 10⁻² and 1 × 10⁻⁵ to 1 × 10⁻³ M with slopes of 47.9 and 54.3 mV/decade within pH 5-6 were obtained by using electrodes 2 and 4, respectively. The percentage recoveries for determination of GSH by the four proposed GSH-selective electrodes were 100 ± 1, 100.5 ± 0.7, 100 ± 1 and 99.0 ± 0.8% for sensors 1, 2, 3 and 4, respectively. Determination of GSH in capsules by the proposed electrodes revealed their applicability for determination of GSH in its pharmaceutical formulations. Also, they were used to determine GSH selectively in presence of its oxidized form (GSSG). Sensor 4 was successfully applied for determination of glutathione in plasma with average recovery of 100.4 ± 1.11%. The proposed method was compared with a reported one. No significant difference for both accuracy and precision was observed.     

Revision of iron(III)–citrate speciation in aqueous solution. Voltammetric and spectrophotometric studies

A detailed study of iron (III)–citrate speciation in aqueous solution (θ = 25 °C, I_c = 0.7 mol L⁻¹) was carried out by voltammetric and UV–vis spectrophotometric measurements and the obtained data were used for reconciled characterization of iron (III)–citrate complexes. Four different redox processes were registered in the voltammograms: at 0.1 V (pH = 5.5) which corresponded to the reduction of iron(III)–monocitrate species (Fe:cit = 1:1), at about −0.1 V (pH = 5.5) that was related to the reduction of FeL₂⁵⁻, FeL₂H⁴⁻ and FeL₂H₂³⁻ complexes, at −0.28 V (pH = 5.5) which corresponded to the reduction of polynuclear iron(III)–citrate complex(es), and at −0.4 V (pH = 7.5) which was probably a consequence of Fe(cit)₂(OH)_x species reduction. Reversible redox process at −0.1 V allowed for the determination of iron(III)–citrate species and their stability constants by analyzing E_p vs. pH and E_p vs. [L⁴⁻] dependence. The UV–vis spectra recorded at varied pH revealed four different spectrally active species: FeLH (log β = 25.69), FeL₂H₂³⁻ (log β = 48.06), FeL₂H⁴⁻ (log β = 44.60), and FeL₂⁵⁻ (log β = 38.85). The stability constants obtained by spectrophotometry were in agreement with those determined electrochemically. The UV–vis spectra recorded at various citrate concentrations (pH = 2.0) supported the results of spectrophotometric–potentiometric titration.     

Novel thiocyanate-selective membrane sensors based on di-, tetra-, and hexa-imidepyridine ionophores

Potentiometric thiocyanate-selective sensors based on the use of three synthesized di-, tetra-, and hexa-imidepyridine derivatives as novel anionic neutral ionophores in plasticized poly(vinyl chloride) (PVC) membranes are described. The sensors exhibit significantly enhanced response towards thiocyanate ions over the concentration range 5×10⁻⁶ to 1.0×10⁻² M with a lower detection limit of 0.3 μg ml⁻¹ and slopes ranging from −55.6 to −58.3 mV per decade. Fast and stable response, good reproducibility, long-term stability, applicability over a wide pH range (2-8) and high selectivity for SCN⁻ ion in the presence of 18 common anions are demonstrated. The sensors are used for direct potentiometric measurements of thiocyanate ions over the concentration range 0.2-580 μg ml⁻¹ and for monitoring sequential titration of some metal ions (e.g. Ag⁺, Tl⁺, Cu²⁺, Pb²⁺) in binary and ternary mixtures. Sequential binding of these metal ions with SCN⁻ ensures share stepwise titration curves with consecutive end point breaks at the equivalent points. Recoveries of 98.5-99.1±0.3% are obtained for metal ion concentrations of 0.06-4 mg ml⁻¹.     

Bulk optode sensors for batch and flow-through determinations of lead ion in water samples

A sensitive optode consisting of highly lead-selective ionophore (Lead IV), proton-selective chromoionophore (ETH 5294) and lipophilic anionic sites (KTpClPB) in plasticized polyvinyl chloride (PVC) membrane was fabricated. The optode membranes were used for determination of Pb²⁺ by absorption spectrophotometry in batch and flow-through systems. The influence parameters such as pH, type of buffer solution, response time and concentration of regenerating solution were optimized. The membrane responded to Pb²⁺ by changing its color from blue to pinkish purple in Tris buffer containing different concentration of Pb²⁺ at pH 7.0. The optode provided the response range of 3.16 × 10⁻⁸ to 5.00 × 10⁻⁵ mol L⁻¹ Pb²⁺ with the detection limit of 2.49 × 10⁻⁸ mol L⁻¹ in the batch system within the response time of 30 min. The dynamic range of 1.26 × 10⁻⁸ to 3.16 × 10⁻⁵ mol L⁻¹ Pb²⁺ with detection limit of 8.97 × 10⁻⁹ mol L⁻¹ were obtained in the flow-through system within the response time of 15 min. Moreover, the proposed optode sensors showed good selectivity towards Pb²⁺ over Na⁺, K⁺, Mg²⁺, Cd²⁺, Hg²⁺ and Ag⁺. It was successfully applied to determine Pb²⁺ in real water samples and the results were compared with well-established inductively coupled plasma optical emission spectrometry (ICP-OES). No significant different value (t_critical = 4.30 > t_exp = 1.00-3.42, n = 3 at 95% of confidence level) was found.     

Novel potentiometric and optical silver ion-selective sensors with subnanomolar detection limits

Ten Ag⁺-selective ionophores have been characterized in terms of their potentiometric selectivities and complex formation constants in solvent polymeric membranes. The compounds with π-coordination show much weaker interactions than those with thioether or thiocarbamate groups as the coordinating sites. Long-term studies with the best ionophores show that the lower detection limit of the best Ag⁺ sensors can be maintained in the subnanomolar range for at least 1 month. The best ionophores have also been characterized in fluorescent microspheres. The so far best lower detection limits of 3 × 10⁻¹¹ M (potentiometrically) and 2 × 10⁻¹¹ M Ag⁺ (optically) are found with bridged thiacalixarenes.     

Production and characterization of a broad-specificity polyclonal antibody for O,O-diethyl organophosphorus pesticides and a quantitative structure-activity relationship study of antibody recognition

Polyclonal antibody (PAb) with broad-specificity for O,O-diethyl organophosphorus pesticides (OPs) against a generic hapten, 4-(diethoxyphosphorothioyloxy)benzoic acid, was produced. The obtained PAb showed high sensitivity to seven commonly used O,O-diethyl OPs in a competitive indirect enzyme-linked immunosorbent assay (ciELISA) using a heterologous coating antigen, 4-(3-(diethoxyphosphorothioyloxy)phenylamino)-4-oxobutanoic acid. The 50% inhibition value (IC₅₀) was 348 ng mL⁻¹ for parathion, 13 ng mL⁻¹ for coumaphos, 22 ng mL⁻¹ for quinalphos, 35 ng mL⁻¹ for triazophos, 751 ng mL⁻¹ for phorate, 850 ng mL⁻¹ for dichlofenthion, and 1301 ng mL⁻¹ for phoxim. The limit of detection (LOD) met the ideal detection criteria of all the seven OP residues. A quantitative structure-activity relationship (QSAR) model was constructed to study the mechanism of antibody recognition using multiple linear regression analysis. The results indicated that the frontier-orbital energies (energy of the highest occupied molecular orbital, E_HOMO, and energy of the lowest unoccupied molecular orbital, E_LUMO) and hydrophobicity (log of the octanol/water partition coefficient, log P) were mainly responsible for the antibody recognition. The linear equation was log(IC₅₀) = −63.274E_HOMO + 15.985E_LUMO + 0.556 log P − 25.015, with a determination coefficient (r²) of 0.908.     

A new sulfonamide derivative as magnesium ion receptor: N-tosyl-2,6-diisopropyl-4-(2,3-dimethoxylbenzoylamide)aniline

N-Tosyl-2,6-diisopropyl-4-(2,3-dimethoxylbenzoylamide)aniline (1) has been synthesized and its metal ion (Na⁺, K⁺, Ca²⁺, Mg²⁺) coordinating properties investigated by FT-IR, ESI-MS, and ¹H NMR methods. Among the tested metal ions, the overall stability constant (log K) for Mg²⁺ (6.89) is the highest (Na⁺, 5.64; K⁺, 5.43; Ca²⁺, 5.51) in 10% water/THF at 25.0 ± 0.5 °C determined by UV-vis spectroscopy, indicating that 1 is a potent ionophore for Mg²⁺ ion.     

Development of a green chromatographic method for determination of colorants in food samples

A green chromatographic analytical method for determination of Tartrazine, Brilliant Blue and Sunset Yellow in food samples is proposed. The method is based on the modification of a C18 column with a 0.25% (v/v) Triton X-100 aqueous solution at pH 7 and in the usage of the same surfactant solution as mobile phase without the presence of any organic solvent modifier. After the separation process on the chromatographic column, the colorants are detected at 430, 630 and 480 nm, respectively. The chromatographic procedure yielded precise results and is able to run one sample in only 8 min, consuming 15.0 mg of Triton X-100 and 38.8 mg of phosphate. When the flow rate of the mobile phase is 1 ml min⁻¹ the retention times are 2.1, 3.6 and 7.0 min for Tartrazine, Brilliant Blue and Sunset Yellow, respectively; and all peak resolutions are ca. 2. The analytical curves present the following linear equations: area = 7.44 10⁵ + 2.71 10⁵ [Tartrazine] (R = 0.998, n = 7); area = 1.09 10⁵ + 3.75 10⁵ [Brilliant] (R = 0.9995, n = 7) and area = −7.34 10⁴ + 2.33 10⁵ [Sunset] (R = 0.998), n = 7) and, the limits of detection for Tartrazine, Brilliant Blue and Sunset Yellow were estimated as 0.125, 0.080 and 0.143 mg l⁻¹. When the proposed method is applied to food samples analysis, precise results are obtained (R.S.D. < 5%, n = 3) and in agreement with those obtained by using the classical spectrophotometric method. The traditional usage of organic solvent as mobile phase in HPLC is not used here, which permits to classify the present method as green.     

A new heteroditopic receptor and sensor highly selective for bromide in the presence of a bound cation

The heteroditopic receptor 2 containing a crown ether and amidoferrocence groups was synthesized and the binding abilities with various anions are reported in the presence and absence of metal cations. In the presence of Na⁺, 2 showed positive co-operative binding towards Br⁻ with the binding affinity K_ass = 16,096 M⁻¹. Therefore, receptor 2 showed a switched-on binding for Br⁻ in the presence of Na⁺ and a switched-off binding in the absence of Na⁺. Compound 2 was also found to sense Cl⁻ and Br⁻ electrochemically.     

Challenges in modelling and optimisation of stability constants in the study of Cu-(TAPS)x-(OH)y system by polarography

This work describes the application of polarography, a technique scarcely used for modelling and optimisation of stability constants, in the study of copper complexes with [(2-hydroxy-1,1-bis(hydroxymethyl)ethyl)amino]-1-propanesulfonic acid (TAPS). Direct current polarography (DCP), using low total copper ion and large total ligand to total copper concentration, enabled the full characterization of Cu-(TAPS)_x-(OH)_y system, whose complexation occurs in the pH range of copper hydrolysis and Cu(OH)₂ precipitation. Cu-(TAPS)_x-(OH)_y system was studied by DCP and glass electrode potentiometry (GEP) in aqueous solution at fixed total ligand to total metal concentrations ratios and varied pH values (25.0 °C; I = 0.1 M, KNO₃). The predicted model, as well as the overall stability constants values, are (as log β): CuL⁺ = 4.2, CuL₂ = 7.8, CuL₂(OH)⁻ = 13.9 and CuL₂(OH)₂²⁻ = 18.94. GEP only allowed confirming the stability constants for CuL⁺ and CuL₂ and was used to determine the pKa of TAPS, 8.342.Finally, a briefly comparative analysis between TAPS and other structural related buffers was done. Evaluation based on log β_CuL versus pKa revealed that TES, TRIS, TAPS and AMPSO coordinated via amino and hydroxymethylgroups forming a five-membered chelate ring. For BIS-TRIS and TAPSO, and possibly DIPSO, one or more five-membered chelate rings involving additional hydroxyl groups are also likely formed.     

Electrical detection of deoxyribonucleic acid hybridization based on carbon-nanotubes/nano zirconium dioxide/chitosan-modified electrodes

A novel and sensitive electrochemical DNA biosensor based on nanoparticles ZrO₂ and multi-walled carbon nanotubes (MWNTs) for DNA immobilization and enhanced hybridization detection is described. The MWNTs/nano ZrO₂/chitosan-modified glassy carbon electrode (GCE) was fabricated and oligonucleotides were immobilized to the GCE. The hybridization reaction on the electrode was monitored by differential pulse voltammetry (DPV) analysis using electroactive daunomycin as an indicator. Compared with previous DNA sensors with oligonucleotides directly incorporated on carbon electrodes, this carbon nanotube-based assay with its large surface area and good charge-transport characteristics increased DNA attachment quantity and complementary DNA detection sensitivity. The response signal increases linearly with the increase of the logarithm of the target DNA concentration in the range of 1.49 × 10⁻¹⁰ to 9.32 × 10⁻⁸ mol L⁻¹ with the detection limit of 7.5 × 10⁻¹¹ mol L⁻¹ (S/N = 3). The linear regression equation is I = 32.62 + 3.037 log C_DNA (mol L⁻¹) with a correlation coefficient value of 0.9842. This is the first application of carbon nanotubes combined with nano ZrO₂ to the fabrication of an electrochemical DNA biosensor with a favorable performance for the rapid detection of specific hybridization.     

New potentiometric sensors for creatinine

Three main types of creatinine potentiometric membrane sensors are described. They are based on the use of dibenzo-30-crown-10 (DB30C10) with potassium tetrakis(p-chlorophenyl)borate type (I), dibenzo-30-crown-10 alone type (II), and potassium tetrakis(p-chlorophenyl)borate alone type (III), incorporating in poly(vinyl chloride) matrix membrane plasticized with either o-nitrophenyl octyl ether or dioctylphthalate. The sensors are used for quantification of creatinine after soaking the membranes in 0.1 M creatinine solution for 2 days. The sensors show almost the same potentiometric response characteristics. Sensor type (I) exhibits Nernstian responses over a concentration range of 5.0 × 10⁻⁵ mol l⁻¹-1.0 × 10⁻² mol l⁻¹ creatinine with cationic slopes of 59.5 ± 0.1 and 60 ± 0.2 mV decade⁻¹ and detection limits of 1.1 × 10⁻⁵ mol l⁻¹ and 8 × 10⁻⁶ mol l⁻¹ creatinine, over the pH range of 3.5-6.5 and 3.5-7.0, for o-NPOE and DOP solvent mediators, respectively. Sensor type (II) displays Nernstian responses over a concentration range of 6.0 × 10⁻⁵ mol l⁻¹-1.0 × 10⁻² mol l⁻¹ creatinine with cationic slopes of 60.0 ± 0.1 and 65.0 ± 0.2 mV decade⁻¹ and detection limits of 1.5 × 10⁻⁵ mol l⁻¹ and 1.4 × 10⁻⁵ mol l⁻¹ creatinine over the pH range of 2.6-6.2 and 2.5-6.0, for o-NPOE and DOP solvent mediators, respectively. Sensor type (III) shows Nernstian responses over a concentration range of 7.0 × 10⁻⁵ mol l⁻¹-1.0 × 10⁻² mol l⁻¹ creatinine with cationic slopes of 60 ± 0.1 and 62.0 ± 0.2 mV decade⁻¹ and detection limits of 2.7 × 10⁻⁵ mol l⁻¹ and 2.0 × 10⁻⁵ mol l⁻¹ creatinine over the pH range of 2.5-6.0, for o-NPOE and DOP solvent mediators, respectively. The response times of the sensors for 10⁻³ mol l⁻¹ creatinine solution are instantaneous (4-10 s). The sensors show long-term stability with life span of ∼6 months. The sensors are used for determination of serum creatinine of rats (Rattus Norvigicus) with mean R.S.D. of 2.62%, and the results agreed well with the Jaffe kinetic method.     

Synthesis and characterization of monoazathiacrown ethers as ionophores for polymeric membrane silver-selective electrodes

Nine monoazathiacrown ethers have been synthesized and explored as ionophores for polymeric membrane Ag⁺-selective electrodes. Potentiometric responses reveal that the ion-selective electrodes (ISEs) based on 2,2′-thiodiethanethiol derivatives can exhibit excellent selectivities toward Ag⁺. The plasticized poly(vinyl chloride) membrane electrode using 22-membered N₂S₅-ligand as ionophore has been characterized and its logarithmic selectivity coefficients for Ag⁺ over most of the interfering cations have been determined as <−8.0. Under optimal conditions, a lower detection limit of 2.2 × 10⁻¹⁰ M can be obtained for the membrane Ag⁺-ISE.     

Thermodynamic representation of the NaCl + Na2SO4 + H2O system with electrolyte NRTL model

A comprehensive thermodynamic model based on the electrolyte NRTL (eNRTL) activity coefficient equation is developed for the NaCl + H₂O binary, the Na₂SO₄ + H₂O binary and the NaCl + Na₂SO₄ + H₂O ternary. The NRTL binary parameters for pairs H₂O-(Na⁺, Cl⁻) and H₂O-(Na⁺, SO₄²⁻), and the aqueous phase infinite dilution heat capacity parameters for ions Cl⁻ and SO₄²⁻ are regressed from fitting experimental data on mean ionic activity coefficient, heat capacity, liquid enthalpy and dissolution enthalpy for the NaCl + H₂O binary and the Na₂SO₄ + H₂O binary with electrolyte concentrations up to saturation and temperature up to 473.15 K. The Gibbs energy of formation, enthalpy of formation and heat capacity parameters for solids NaCl_(s), NaCl·2H₂O_(s), Na₂SO_4(s) and Na₂SO₄·10H₂O_(s) are obtained by fitting experimental data on solubilities of NaCl and Na₂SO₄ in water. The NRTL binary parameters for the (Na⁺, Cl⁻)-(Na⁺, SO₄²⁻) pair are regressed from fitting experimental data on dissolution enthalpies and solubilities for the NaCl + Na₂SO₄ + H₂O ternary.     

Direct determination of uranium in seawater by laser fluorimetry

A method for estimation of uranium in seawater by using steady state laser flourimetry is described. Uranium present in seawater, in concentration of approximately 3 ng ml⁻¹ was estimated without prior separation of matrix. Quenching effect of major ions (Cl⁻, Na⁺, SO₄⁻, Mg⁺, Ca⁺, K⁺, HCO₃⁻, Br⁻) present in seawater on fluorescence intensity of uranium was studied. The concentration of phosphoric acid required for maximum enhancement of fluorescence intensity was optimized and was found to be 5%. Similarly the volume of concentrated nitric acid required to eliminate the quenching effect of chloride and bromide completely from 5 ml of seawater were optimized and was found to be 3 ml. A simple equation was derived using steady state fluorescence correction method and was used for calculation of uranium concentration in seawater samples. The method has a precesion of 1% (1 s, n = 3). The values obtained from laser fluorimetry were validated by analyzing the same samples by linear sweep adsorptive stripping voltametry (LSASV) of the uranium-chloranilic acid (2,5-dichloro-3,6-dihydroxy-1,4-benzoquinone) complex. Both the values are well in agreement.     

Screen-printed enzyme electrodes for the detection of marker analytes during winemaking

Biosensors for malic acid and glucose have been developed, using screen-printed electrodes and two different classes of enzymes: NAD(P)⁺-dependent dehydrogenases and oxidases. The active surface of the electrodes was modified using Meldola Blue (malic acid) and Prussian Blue (glucose) and in this way sensitive, low cost and reliable NAD(P)H and H₂O₂ probes were obtained. Fixed potential amperometry was used for the detection of substrates in small volumes of sample (50 μl). Immobilization of the enzymes in a polyethylenimine-glutaraldehyde cross-linking membrane allowed sensors to be obtained with sufficient operational stability. The detection limits were of 10⁻⁵ M for malic acid and 10⁻⁶ M for glucose. The sensors were applied in the analysis of different samples of wine.