Determination of priority carcinogenic polycyclic aromatic hydrocarbons in wastewater and surface water by coacervative extraction and liquid chromatography-fluorimetry

The US Environmental Protection Agency (EPA) and the European Union (EU) have set restrictive limits for priority carcinogenic polycyclic aromatic hydrocarbons (CPAHs) in surface waters (EPA 3.8 ng L(-1) and EU 2-100 ng L(-1)) in order to protect aquatic life and human health. Currently, methods meeting these sensitivity criteria are not suitable for routine analysis of CPAHs. Here, we present a simple, rapid and low-cost method for the routine monitorization of these pollutants in aquatic environments based on their extraction with coacervates of decanoic acid reverse micelles in the nano- and microscale, and determination by liquid chromatography-fluorimetry (LC-FL). The method involves the stirring of filtered aqueous samples (36 mL) with 4 mL of THF containing 70 mg of decanoic acid for 5 min, its centrifugation for 10 min and the analysis of 20 microL of the resulting coacervate containing the CPAHs by LC/FL. The method is robust, the extractions being independent on salt concentration (up to 1 M), temperature (up to 60 degrees C) and pH (below 4). Besides, the coacervate prevents the CPAHs from adsorption onto the surface of containers during sample storage. No clean-up steps are necessary and the method is matrix-independent. The quantification and detection limits of the method ranged between 0.4 and 3.5 ng L(-1) and 0.1 and 1 ng L(-1), respectively, for the seven priority CPAHs. The method has been successfully applied to the determination of these pollutants in raw and treated sewage from three mechanical-biological treatment plants, two rivers and a reservoir with frequent motorized recreational craft activities, all of them located in the South of Spain. Recoveries for spiked samples in the range 2-30 ng L(-1) were between 88 and 95% with relative standard deviations from 1 to 7%. CPAHs were present in wastewater influents at concentrations in the range 3.9-37 ng L(-1), while the treatment at the WWTPs studied reduced their concentration in their respective effluents in a percentage near 100%. Three CPAHs were present at quantifiable levels in Guadajoz river (1.8-6.6 ng L(-1)) and six in La Bre?a reservoir (1.39-4.8 ng L(-1)).     

Determination of polybrominated diphenyl ethers in river water by combination of liquid–liquid extraction and gas chromatography–mass spectrometry

In this work,a reliable and sensitive method for detecting polybrominated diphenyl ethers(PBDEs) has been developed by the combination of liquid–liquid extraction and gas chromatography–mass spectrometry.PBDEs were extracted from a large volume of water by liquid–liquid extraction and purified by silica gel chromatography.In order to reduce the deviation,dibromobiphenyl was exploited as the internal standard to minimize differences among the injections.The quantification was performed using an external standard.Good linear correlation coefficients(0.991) and a wide linearity range(1.0–500.0 ng/L) indicated the steadiness of the proposed method.Moreover,the satisfactory recovery(75%)suggested that successful determination of PBDEs in river water had been achieved.Furthermore,the deduction behavior of PBDEs in river water could be inferred according to the results.     

Solid-phase extraction and high-performance liquid chromatography mass spectrometry analysis of nitrosamines in treated drinking water and wastewater

N-Nitrosamines, including N-nitrosodimethylamine (NDMA), were identified as chlorination byproducts in drinking water in 1989. Nitrosamines are known rodent carcinogens and probable human carcinogens, and so they are considered disinfection byproducts (DBPs) of public health concern. Epidemiological studies show a potential association of consumption of chlorinated drinking water with an increased risk of bladder cancer. As small, relatively polar DBPs that often occur at low-ng/L concentrations in water, nitrosamines pose analytical challenges for accurate determination. Sample preparation (e.g., the commonly used solid-phase extraction) plays a critical role in achieving reliable determination of nitrosamines at ng/L concentrations. Historically, gas chromatography (GC)-based techniques have been used for nitrosamine analysis. Recently, newly developed liquid chromatography–tandem mass spectrometry (LC-MS²) methods have shown potential advantages in determining polar DBPs. This review focuses on the sample preconcentration methods and LC-MS² determination of nitrosamines in drinking water and wastewater. It also provides a historical perspective on nitrosamines and their occurrence in drinking water.     

Determination of bisphenols in sewage based on supramolecular solid-phase extraction/liquid chromatography/fluorimetry

Supramolecular sorbents (hemimicelles/admicelles) are proposed for the extraction/preconcentration of bisphenols from aqueous environmental samples prior to their liquid chromatography/fluorimetric determination. A comparative study on the use of cetyltrimethylammonium bromide (CTABr)-coated silica and sodium dodecyl sulphate (SDS)-coated gamma-alumina as sorbent materials, is presented. Bisphenol A (BPA) and bisphenol F (BPF) were quantitatively retained on CTABr admicelles. Addition of tetrabutylammonium chloride (TBAC) to water samples was required to completely retain bisphenols on SDS-gamma-alumina. Retention on both sorbents occurred through hydrophobic and pi-cation interactions between the quaternary ammonium head group of the cationic amphiphile (CTABr or TBAC) and the aromatic rings of the target analytes. TBAC-SDS-gamma-alumina was the sorbent selected for the SPE of bisphenols on the basis of the lower elution volume required (1 ml of methanol) and the greater breakthrough volume allowed (400 ml), which permitted to reach practical detection limits of 10 and 15 ng/l for BPF and BPA, respectively. The proposed method was used to quantify bisphenol A and bisphenol B in wastewater samples from four sewage treatment plants. Recoveries obtained ranged between about 99 and 105% for raw wastewater and between 96 and 106% for treated wastewater.     

Study of solid-phase extraction for the determination of sequestering agents in river water by high-performance liquid chromatography

Anion-exchange solid-phase extraction accompanied with high-performance liquid chromatography has been developed for the determination of six kinds of aminopolycarboxylic acids (APCAs) in river water [N-(2-hydroxyethyl)ethylenediaminetriacetate (HEDTA), ethylenediaminetetraacetate (EDTA), 1,3-propanediaminetetraacetate (PDTA), diethylenetriaminepentaacetate (DTPA), 1,2-propanediaminetetraacetate (MeEDTA), and O,O′-bis(2-aminoethyl)ethyleneglycoltetraacetate (GEDTA)]. The enrichment of APCAs using an anion-exchange cartridge was successfully done by the removal of anions, which competed with APCAs in anion-exchange processes. Barium chloride solution was added to river water and the mixture was passed through On Guard II Ag and H cartridges and then a Bond Elut Jr.SAX cartridge to enrich APCAs. After elution, APCAs were analyzed on two reversed phase C30 columns connected in series and detected with ultraviolet detection. The enrichment using solid-phase extraction permitted the determination of APCAs in river water at concentrations as low as 1 nM. Good recoveries (83–111%) were obtained for each APCA by the standard addition method on three river water samples with high accuracy (RSD 1.8–9.5%). Applying this method, two kinds of APCAs, EDTA and DTPA, were determined in samples from the Oyabe and Senbo Rivers in Japan.     

Determination of phenols in water by on-line solid-phase disk extraction and liquid chromatography with electrochemical detection

Poly(styrene-divinylbenzene) (PS-DVB) membrane extraction disks were used as sorbents for the on-line solid phase extraction of 13 phenols (nitro and chlorophenols) in river and tap waters. Determination was performed by liquid chromatography with electrochemical detection (LC-ED). An acetate buffer-acetonitrile-methanol mixture as mobile phase and amperometric detection at +1100 mV were used. High water volumes, up to 250 ml, can be preconcentrated without loss of phenols (recoveries between 80% and 100%) except for the more polar ones. Moreover, detection limits between 0.01 and 0.1 μg l⁻¹ in tap water and between 0.1 and 1.0 μg⁻¹ in river water were obtained. The method has been applied to the analysis of two river water samples.     

Screening of domperidone in wastewater by high performance liquid chromatography and solid phase extraction methods

Domperidone is a dopamine D₂ receptor antogonist, which has been used as antiemetic agent in human beings. It has been found in wastewater released by some pharmaceutical industries leading to the contamination of surface and ground water. Therefore, a sensitive, inexpensive and reproducible HPLC-SPE method was developed for the analysis of domperidone in the wastewater. The column used was Waters symmetry C₁₈ (15 cm × 0.46 mm, 5 μm). The mobile phase used was phosphate buffer (50 mM, pH 3.5) acetonitrile (80:20, v/v) at the flow rate 2.0 mL/min. The detection was achieved by using UV mode at 230 nm. The retention, separation and resolution factors were 2.63, 3.00 and 3.20, respectively. The percentage recovery of domperidone from wastewater was 95.0%. Celiprolol was used as the internal standard to access the percentage extraction of domperidone from wastewater.     

Analysis of bisphenols in soft drinks by on-line solid phase extraction fast liquid chromatography-tandem mass spectrometry

In this study, an automated on-line solid-phase extraction coupled to fast liquid chromatography–tandem mass spectrometry (on-line SPE fast LC–MS/MS) method was developed for the simultaneous analysis of bisphenol A (BPA), bisphenol F (BPF), bisphenol E (BPE), bisphenol B (BPB) and bisphenol S (BPS) in canned soft drinks without any previous sample treatment. A C18 (12 μm particle size) loading column was used for the SPE on-line preconcentration before the liquid chromatography baseline separation of bisphenol compounds using a C18 Fused-Core™ (50 mm × 2.1 mm i.d.) column, which took less than 3 min. Gradient elution and heated electrospray were used to reduce matrix effect and improve ionization efficiency. To select the most intense and selective transitions, fragmentation studies were performed by multiple-stage mass spectrometry in an ion trap mass analyzer and tandem mass spectrometry in a triple quadrupole instrument, this latter instrument being used for quantitation in SRM mode. Quality parameters of the method were established and we obtained a simple, fast, reproducible (RSD values lower than 10%) and accurate (precision higher than 93%) method for the analysis of bisphenols in canned soft drinks at the ng L⁻¹ level using matrix-matched calibration.     

Comparison of different extraction methods for the determination of statin drugs in wastewater and river water by HPLC/Q-TOF-MS

Three preconcentration techniques including solid phase extraction (SPE), dispersive liquid-liquid microextraction (DLLME) and stir-bar sorptive extraction (SBSE) have been optimized and compared for the analysis of six hypolipidaemic statin drugs (atorvastatin, fluvastatin, lovastatin, pravastatin, rosuvastatin and simvastatin) in wastewater and river water samples by high performance liquid chromatography coupled to quadrupole-time-of-flight mass spectrometry (HPLC/Q-TOF-MS). Parameters that affect the efficiency of the different extraction methods such as solid phase material, sample pH and elution solvent in the case of SPE; the type and volume of the extracting and dispersive solvent, pH of sample, salt addition and number of extraction steps in the case of DLLME; and the stirring time, pH of sample, sample volume and salt addition for SBSE were evaluated. SPE allowed the best recoveries for most of the analytes. Pravastatin was poorly extracted by DLLME and could not be determined. SBSE was only applicable for lovastatin and simvastatin. However, despite the limitations of having poorer recovery than SPE, DLLME and SBSE offered some advantages because they are simple, require low organic solvent volumes and present low matrix effects. DLLME required less time of analysis, and for SBSE the stir-bar was re-usable. SPE, DLLME and SBSE provided method detection limits in the range of 0.04-11.2 ng L⁻¹, 0.10-17.0 ng L⁻¹ for 0.52-2.00 ng L⁻¹, respectively, in real samples. To investigate and compare their applicability, SPE, DLLME and SBSE procedures were applied to the detection of statin drugs in effluent wastewater and river samples.     

Comparison of supercritical fluid extraction and liquid-liquid extraction for isolation of selected pesticides stored in freeze-dried water samples

Summary The stability of freeze-dried water samples spiked with eight agrochemicals (atrazine, simazine, linuron, carbaryl, propanil, fenitrothion, parathion and fenamiphos) were examined to evaluate their suitability as candidate reference materials for their determination in water samples. In addition, two different extraction procedures, liquid-liquid and supercritical fluid extraction, were compared for the isolation and trace enrichment of target analytes from freeze-dried water samples. Final analytical determinations were by gas chromatography-nitrogen phosphorus detection and electronic impact mass spectrometry, and by liquid chromatography-diode array detection. The whole methodology developed in this paper permitted the determination of pesticides spiked in water at levels varying from 0.03 to 6.9 g L^–1.     

Determination of pharmaceuticals in soils and sediments by pressurized liquid extraction and liquid chromatography tandem mass spectrometry

The present work describes the development of a sensitive analytical method based on pressurized liquid extraction (PLE) and pre-concentration by solid-phase extraction (SPE), followed by liquid chromatography–electrospray tandem mass spectrometry (LC–ESI-MS/MS) for the determination of seventeen pharmaceuticals in soils and sediments. The method is based on sample homogenisation using Na₂–EDTA washed sand and extraction with water at 90 °C. Special emphasis was placed on the optimization of the extraction procedure to develop a green method that reduces, at a maximum, the use of organic solvents in order to eliminate matrix components during the clean-up. The proposed method was linear in a concentration range from 0.3 to 333 ng g⁻¹, with correlation coefficients higher than 0.993. Method detection (MDLs) and quantification (MQLs) limits ranged from 0.1 to 6.8 ng g⁻¹ and from 0.25 to 23 ng g⁻¹, respectively. Absolute recoveries were analyte dependent, varying between 50% and 105% at the MQL level, except for fenofibrate (40%) and diclofenac (34%). The intra-day and inter-day precision was given by RSD values from 0.7% to 7.9% and from 1.6% to 14.5%, respectively. Acetaminophen, carbamazepine, ciprofloxacin, clofibric acid, codeine, diazepam, fenofibrate, metropolol, ofloxacin and propanolol were detected at concentrations from MDL to 35.62 ng g⁻¹ in soils and sediments from marsh areas. Due to the low recoveries, results for fenofibrate and diclofenac can only be considered as semi-quantitative. The method was fully suitable for the other 15 pharmaceuticals.     

Determination of 2-mercaptobenzothiazole in river water by HPLC

Summary A method is proposed for the determination of 2-mercaptobenzothiazole in river waters using multi-electrode electrochemical detection HPLC. 2-mercaptobenzothiazole determination is unsatisfactory by gas chromatography as it degrades readily on the column. Multielectrode electrochemical detection HPLC combines sensitivity and the ability to screen out other electrochemically active species. The development work leading up to the proposed method is discussed. The method has a limit of detection of 0.798gl^–1 2-mercaptobenzothiazole and a total standard deviation of 2.06gl^–1 2-mercaptobenzothiazole at a concentration of 7.97gl^–1 2-mercaptobenzothiazole in river water.     

固相萃取-高效液相色谱-串联质谱测定水中8种双酚-二环氧甘油醚

建立了水中8种双酚-二环氧甘油醚（双酚A二缩水甘油醚（BADGE）及其衍生物双酚A（3-氯-2-羟丙基）甘油醚（BADGE·5HCl）、双酚A双（3-氯-2-羟丙基）醚（BADGE·52HCl）、双酚A（2,3-二羟丙基）甘油醚（BADGE·5H₂O）、双酚A双（2,3-二羟丙基）醚（BADGE·52H₂O）、双酚A（3-氯-2-羟丙基）（2,3-二羟丙基）醚（BADGE·5HCl·5H₂O）和双酚F-二环氧甘油醚（BFDGE）及其衍生物双酚F双（3-氯-2-羟丙基）醚（BFDGE·52HCl））的固相萃取-高效液相色谱-串联质谱（SPE-HPLC-MS/MS）测定方法。10个饮用水接触涂料样品在室温避光条件下,以超纯水浸泡（24±1）h,然后取200 mL经C₁₈固相萃取柱进行净化浓缩,以C₁₈色谱柱进行分离,以5 mmol/L醋酸铵、甲醇和水为流动相进行梯度洗脱,质谱多反应监测（MRM）模式检测,外标法定量。结果表明,8种双酚-二环氧甘油醚在0.007~5.00 μg/L线性关系良好,相关系数均大于0.9990,该方法对8种双酚-二环氧甘油醚的定量限为7~91 ng/L,回收率为79.1%~101%,RSD为4.0%~12%。该方法具有灵敏度高、选择性强的特点,能够满足水中双酚-二环氧甘油醚的快速检测和准确定量。     

A self-assembly pipette tip graphene solid-phase extraction coupled with liquid chromatography for the determination of three sulfonamides in environmental water

A sensitive, economical, and miniaturized self-assembly pipette tip graphene solid-phase extraction (PT-G-SPE) coupled with liquid chromatography fluorescence detection (LC-FD) was developed for rapid extraction and determination of three sulfonamide antibiotics (SAs) in environmental water samples. The PT-G-SPE cartridge, assembled by packing 1.0 mg of graphene as sorbent into a 100 μL pipette tip, showed high adsorption capacity for the SAs owing to the large surface area and unique structure of graphene. The factors that affected the extraction efficiency of PT-G-SPE, including sample volume, pH, sorbent amount, washing solvent and eluent solvent were optimized. Good linearity for SAs was obtained in a range of 2–4000 pg mL⁻¹ with correlation coefficients (r²) ≥ 0.9993. The recoveries of the SAs at three spiked levels ranged from 90.4% to 108.2% with relative standard deviations (RSD) ≤ 6.3%. In comparison with other sorbents such as C₁₈, HLB, SCX, PCX, and multiwalled carbon nanotubes, one advantage of using graphene as sorbent of pipette tip solid-phase extraction (PT-SPE) was that PT-G-SPE could adsorb larger sample volume (10 mL) at a small amount of sorbent (1 mg) and low solvent consumption with good extraction efficiency, which not only increased the fraction of analytes to LC and the sensitivity of SAs determination, but also reduced the cost and pollution.     

Chemometric tools improving the determination of anti-inflammatory and antiepileptic drugs in river and wastewater by solid-phase microextraction and liquid chromatography diode array detection

An analytical method for the simultaneous determination of seven non-steroidal anti-inflammatory drugs (naproxen, ketoprofen, diclofenac, piroxicam, indomethacin, sulindac and diflunisal) and the anticonvulsant carbamazepine in river and wastewater is reported. The method involves pre-concentration and clean-up by solid-phase microextraction using polydimethylsiloxane/divinylbenzene fibers, followed by liquid chromatography with diode array detection analysis. Owing to the fact that river water samples did not contain interferences and no sensitivity changes due to sample matrix were observed, external calibration was implemented. Standardization was also applied in order to carry out the prediction step by preparing only two diluted standards that were subjected to the pre-concentration step and a set of standards prepared in solvent. For the analysis of wastewater samples, in contrast, it was necessary to implement standard addition calibration in combination with the multivariate curve resolution-alternating least squares (MCR-ALS) algorithm, which allowed us to overcome matrix effect and exploit the second order advantage. Recoveries ranging from 72% to 125% for all pharmaceuticals proved the accuracy of the proposed method in river water samples. On the other hand, wastewater sample recoveries ranged from 83% to 140% for all pharmaceuticals, showing an acceptable performance – considering this sample contains no modeled interferences.     

Determination of itopride in human plasma by liquid chromatography coupled to tandem mass spectrometric detection: application to a bioequivalence study

A simple method using a one-step liquid-liquid extraction (LLE) with butyl acetate followed by high-performance liquid chromatography (HPLC) with positive ion electrospray ionization tandem mass spectrometric (ESI-MS/MS) detection was developed for the determination of itopride in human plasma, using sulpiride as an internal standard (IS). Acquisition was performed in multiple reaction monitoring (MRM) mode, by monitoring the transitions: m/z 359.5 > 166.1 for itopride and m/z 342.3 > 111.6 for IS, respectively. Analytes were chromatographed on an YMC C₁₈ reverse-phase chromatographic column by isocratic elution with 1 mM ammonium acetate buffer-methanol (20: 80, v/v; pH 4.0 adjusted with acetic acid). Results were linear (r² = 0.9999) over the studied range (0.5-1000 ng mL⁻¹) with a total analysis time per run of 2 min for LC-MS/MS. The developed method was validated and successfully applied to bioequivalence studies of itopride hydrochloride in healthy male volunteers.     

气相色谱-质谱法测定环境水体中24种半挥发性有机物

采用液液萃取-气相色谱-质谱法同时测定环境水体中的24种半挥发性有机物。水样经二氯甲烷萃取,萃取液经浓缩定容后在DB-5MS毛细管色谱柱上分离,质谱中选择电子轰击离子源-选择离子监测模式,以菲-D10为内标物进行定量。24种化合物的质量浓度在一定范围内与其峰面积呈线性关系,检出限为0.03~0.28μg·L-1。加标回收率在70.1%~128%之间,测定值的相对标准偏差(n=6)小于6%。实际样品分析结果表明,某地地表水和化工区水样中均检出硝基苯类、氯代苯酚类、酞酸酯类等化合物。     

Supramolecular solvent-based extraction of benzimidazolic fungicides from natural waters prior to their liquid chromatographic/fluorimetric determination

A supramolecular solvent made up of vesicles of decanoic acid in the nano- and microscale regimes dispersed in a continuous aqueous phase is proposed for the extraction/preconcentration of benzimidazolic fungicides (BFs) from river and underground water samples prior to their determination by liquid chromatography (LC)/fluorimetry. The solvent is produced from the coacervation of decanoic acid aqueous vesicles by the action of tetrabutylammonium (Bu₄N⁺). Carbendazim (CB), thiabendazole (TB) and fuberidazole (FB) are extracted on the basis of hydrophobic and π-cation interactions and the formation of hydrogen bonds. The extraction provides high preconcentration factors (160 for CB and 190 for TB and FB), requires a short time (the procedure takes less than 20 min and several samples can be simultaneously processed) and a low sample volume (20 mL), and avoids the use of toxic organic solvents. Because of the absence of matrix interferences and the low viscosity of the extracts, these can be directly injected into the chromatographic system without the need of cleaning-up or diluting them. Recoveries are not influenced by the presence of salt concentrations up to 1 M. The proposed method provides detection limits for the determination of CB, TB and FB in natural waters of 32, 4 and 0.1 ng L⁻¹, respectively, and a precision, expressed as relative standard deviation (n = 11) of 5.5% for CB (100 ng L⁻¹), 4.0% for TB (80 ng L⁻¹) and 2.5% for FB (30 ng L⁻¹). Recoveries obtained by applying this approach to the analysis of river and underground water samples fortified at the ng L⁻¹ level are in the intervals 75–83, 95–102 and 97–101% for CB, TB and FB, respectively.     

Determination of gadolinium in river water by SPE preconcentration and ICP-MS

An analytical scheme was developed for the determination of Gd-diethylenetriaminepentaacetate (Gd-DTPA), Gd and the other rare earth elements (REE) in river water by inductively coupled plasma (quadrupole) mass spectrometry (ICP-Q-MS). The preconcentration step was essential, since the limits of detection of this multielemental analytical technique are higher than the trace concentrations of the interesting elements in river water.Solid phase extraction (SPE) with different commercially available complexing agents (Chelex 100, Toyopearl and ethylhexylphosphates) was employed for the preconcentration of REE. The investigations revealed that complex stability (varying in dependence of the pH value) has a strong influence on the degree of the enrichment of Gd-DTPA. Based on acidified water samples (pH<3) a procedure using ethylhexylphosphates was proposed for the preconcentration of Gd and REE from surface water samples. For this purpose C₁₈-cartridges loaded with ethylhexylphosphates were used, resulting in an enrichment factor of 40.     

Determination of gastrodin and vanillyl alcohol in Gastrodia elata Blume by pressurized liquid extraction at room temperature

Pressurized liquid extraction (PLE) at room temperature with a laboratory-assembled system was applied for the extraction of gastrodin (GA) and vanillyl alcohol (VA) in Gastrodia elata Blume. The proposed system setup for this current work was simpler as no heating and backpressure regulator was required. Extraction with PLE was carried out dynamically at a flow rate of 1.5 mL/min, at room temperature, under an applied pressure of 10-20 bars with an extraction time of 40-50 min. The extraction efficiencies of the proposed method using 20% aqueous ethanol were compared with heating under reflux using organic solvents such as methanol and ethanol/water (20:80) for different batches of medicinal plant materials. For the determination of GA and VA in G. elata Blume, the extraction efficiencies of PLE at room temperature were observed to be comparable with heating under reflux. The method precision was found to vary from 1.6 to 8.6% (RSD, n = 6) on different days. The marker compounds present in the various medicinal plant extracts were determined by gradient elution HPLC and HPLC/MS/MS. Our work demonstrated the possibility of implementation of PLE at room temperature and the advantages of minimizing the use of organic solvents in the extraction process.