Determination of phenol at ng l-1 level by flow-injection chemiluminescence combined with on-line solid-phase extraction

In this paper, a simple flow-injection chemiluminescence (CL) system combined with on-line solid-phase extraction is presented to determine phenol. This method is based on the enhancement effect of phenol on the luminol-K3Fe(CN)6 CL system. The solid-phase extraction promised the high sensitivity and improved selectivity of CL detection. With the calibration range from 4.7 ng l-1 to 470 ng l-1 phenol concentration, the proposed method was applied to analyzing phenol in water samples and the obtained results were validated by the standard method. The detection limit was determined as 0.66 ng l-1. The relative standard deviation was 1.5% for determining 4.7 ng l-1 phenol standard (n=7).     

Determination of tetracyclines residues in honey by on-line solid-phase extraction high-performance liquid chromatography

An automated system using on-line solid-phase extraction (SPE) high-performance liquid chromatography (HPLC) with ultraviolet (UV) detection was developed for the determination of tetracyclines (TCs), such as tetracycline (TC), oxytetracycline (OTC), chlortetracycline (CTC), metacycline (MC), and doxycycline (DC) in honey. One milliliter diluted honey sample was injected into a conditioned C18 SPE column and the matrix was washed out with water for 3 min. By rotation of the switching valve, TCs were eluted and transferred to the analytical column by the chromatographic mobile phase. Chromatographic conditions were optimized. TCs were separated in less than 8 min with a gradient elution using a mixture of 0.8% formic acid and acetonitrile. The UV detection was performed at 365 nm. The conditions for on-line SPE, including solvent and total time for loading sample and washing matrix were also optimized. Time for extraction and separation decreased greatly. For the five kinds of TCs, the limits of detection (LODs) at a signal-to-noise of 3 ranged from 5 to 12 ng g⁻¹. The relative standard deviations (R.S.D.) for the determination of TCs ranged from 3.4 to 7.1% within a day and ranged from 3.2 to 8.9% in 3 days, respectively.     

Comparison of traditional cloud-point extraction and on-line flow-injection cloud-point extraction with a chemiluminescence method using benzo[a]pyrene as a marker

In this work, using benzo(a)pyrene (BaP) as marker, the analytical merits of on-line flow-injection cloud-point extraction (FI CPE), including preconcentration factor, extraction efficiency, sample throughput, and analysis time were evaluated by use of peroxyoxalate chemiluminescence (CL) detection. Moreover, by detailed discussion of several preconcentration conditions for traditional and on-line FI CPE the advantages of on-line FI CPE became conspicuously apparent. When coupled with separation techniques such as high-performance liquid chromatography (HPLC) or capillary electrophoresis (CE), on-line FI CPE–CL has much potential for analysis of low concentrations of polycyclic aromatic hydrocarbons (PAH) in environmental samples.     

Determination of Zn(II) in natural waters by ICP-OES with on-line preconcentration using a simple solid phase extraction system

An on-line zinc preconcentration and determination system implemented with inductively coupled plasma optical emission spectrometry (ICP-OES) was developed. The zinc was precipitated and retained on a minicolumn filled with ethyl vinyl acetate (EVA) at pH 9.0, without using any complexing reagent. The zinc ions were eluted from the minicolumn with 10% (v/v) hydrochloric acid. Experimental conditions including pH and sample loading and eluting variables were evaluated and established.An enrichment factor (EF) of 44 was obtained for Zn²⁺ with a preconcentration time of 120 s. Under the optimal conditions, the value of the limit of detection (3σ) for the preconcentration of 10 mL of sample was 0.08 μg L^{− 1}. The sampling frequency was about 24 h^{− 1}. The precision for six replicate determinations (repeatability conditions) at 50 μg L^{− 1} Zn level was 3.94% relative deviation standard (RSD), calculated from the peak heights obtained. The methodology was successfully applied to the determination of zinc in tap water samples and in a certified VKI reference material QC Metal LL1 DHI (Water & Environment) Denmark.     

Determination of andrographolide and dehydroandrographolide in rabbit plasma by on-line solid phase extraction of high-performance liquid chromatography

The high-performance liquid chromatography (HPLC) coupled with on-line solid phase extraction (SPE) and ultraviolet (UV) detection was developed for determining andrographolide and dehydroandrographolide in rabbit plasma. Plasma samples (100 μL) were injected directly into a C18 SPE column and the biological matrix was washed out for 6 min using 15% aqueous methanol. By rotation of the switching valve, andrographolide and dehydroandrographolide were eluted in the back-flush mode and transferred to the analytical column by the chromatographic mobile phase consisted of methanol:acetonitrile (ACN):water (50:10:40; v/v). The UV detection was performed at 225 nm. The calibration curves showed excellent linear relationship (R ≥ 0.9993) over the concentration range of 0.05-5.0 μg mL⁻¹. The within- and between-day precisions (R.S.D.) of two analytes were in the range of 1.2-6.5% and the accuracies were between 92.0% and 102.1%. Their recoveries were all greater than 94%. The limits of detection were 0.019 μg mL⁻¹ for andrographolide and 0.022 μg mL⁻¹ for dehydroandrographolide. This method was successfully applied to the plasma concentration-time curve study after oral administration of Andrographis paniculata Nees extract in rabbit.     

Determination of phenolic compounds in water samples by on-line solid-phase extraction—supercritical-fluid chromatography with diode-array detection

Summary The eleven Environmental Protection Agency (EPA) priority phenolic compounds have been determined by solid-phase extraction (SPE) coupled on-line to supercritical-fluid chromatography (SFC) with diodearray detection. The variables affecting chromatographic separation were optimized and the analytes were separated at 40 °C in two diol columns connected in series; a gradient of methanol, as modifier, and CO₂ was used as mobile phase. Under these conditions, all the compounds studied were separated to baseline in less than 13 min. PLRP-S and LiChrolut EN were tested as sorbents in a 10×3 mm i.d. laboratory-packed precolumn for solid-phase extraction. An ion-pair reagent, tetrabutylammonium bromide (TBA), was used in the extraction process to increase break-through volumes. The performance of the method was checked with tap and river waters and the pre-concentration of 20 mL of sample in a PLRP-S pre-column enabled phenolic compounds to be determined at low μg L⁻¹ levels with limits of detection ranging between 0.4 and 2 μg L⁻¹. The repeatability and reproducibility between days (n=3) for real samples spiked at 10 μg L⁻¹ were lower than 10%.     

Determination of nitroimidazole antibiotics based on dispersive solid-phase extraction combined with capillary electrophoresis

For a long time, the detection of nitroimidazole antibiotics (NIABs) has been a research focus in environmental analytical chemistry. In this work, a novel technique for the analysis of nitroimidazoles was established based on capillary electrophoresis (CE). UiO-66, synthesized using a solvothermal method, was utilized as an adsorbent in the dispersive solid-phase extraction (DSPE) of five different NIABs. The separation and detection of NIABs in environmental water samples were accomplished using the CE diode array detection method. The optimal extraction conditions were obtained after systematically studying the effects of adsorption time, the amount of extractant, and elution solvent on extraction efficiency. According to the results of the study, the limit of detections of the five NIABs were between 16 and 97 ng/mL, the relative standard deviations were between 0.32% and 0.55%, and the spike recoveries were between 87.43% and 104.8%. This study presents a novel technique for measuring NIABs in complex water samples.     

A novel molecularly imprinted polymer for simultaneous extraction and determination of sudan dyes by on-line solid phase extraction and high performance liquid chromatography

A novel molecularly imprinted polymer was synthesized with attapulgite employed as matrix, which is simple and time-saving. In this method, sudan I was chosen as template molecule, 2-vinylpyridine as functional monomer and ethylene glycol dimethacrylate as cross-linking agent, respectively. The imprinted polymer was characterized by the infrared spectroscopy and transmission electron microscopy. Then the selectivity experiments were performed on sudan dyes and the recognition coefficients for sudan I, sudan II, sudan III and sudan IV were 2.9, 1.9, 1.9 and 2.3, respectively. As the packing material of solid-phase extraction, the imprinted polymer has been applied to on-line concentration of the four sudan dyes in samples from Yellow River water, tomato sauce and sausage. The corresponding analytical methods to determine these sudan dyes have been developed. The limits of detection for these sudan dyes were in the range of 0.01–0.05 ng mL⁻¹ for Yellow River water, 1.0–3.0 ng g⁻¹ for tomato sauce and 0.8–3.0 ng g⁻¹ for sausage.     

Determination of nicardipine and amlodipine in human plasma using on-line solid-phase extraction with a monolithic weak cation-exchange column

An on-line solid-phase extraction (SPE)-HPLC method was developed for simultaneous screening of nicardipine and amlodipine in human plasma. A short monolithic poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate) [p(GMA-EDMA)]-based weak cation-exchange (WCX) column was prepared and employed as the selective extraction sorbent, which exhibited good permeability and biocompatibility. During the on-line SPE protocol, high-abundance proteins (human serum albumin, immunoglobulin G, immunoglobulin A and transferrin) and most matrixes in plasma were fast removed while nicardipine and amlodipine were effectively trapped on this monolithic column. Furthermore, the monolithic WCX sorbent could be continuously reused more than 300 times without obvious changes in analytes extraction and proteins cleanup. The proposed method was linear over a range of 0.5-50.0 ng mL⁻¹ for both analytes with a linear regression coefficient greater than 0.998, and the limit of detection (LOD) for each analyte was 0.2 ng mL⁻¹. Validation assays also demonstrated acceptable precision and adequate recovery for simultaneous quantitative screening of nicardipine and amlodipine in human plasma. Real plasma samples from hypertensive patients receiving a dosing of 5 mg antagonists were examined by using the proposed method. Results indicated that the on-line SPE-HPLC method could be applied for simultaneously monitoring of nicardipine and amlodipine in clinical plasma samples.     

在线固相萃取净化-液相色谱-串联质谱法测定猪肉中10种大环内酯类抗生素

建立了在线固相萃取净化-液相色谱-串联质谱检测猪肉中10种大环内酯类抗生素残留的方法。样品经过乙腈提取,提取液40℃旋蒸至干后,分析物用2 mL磷酸盐缓冲液溶解,溶解液经在线固相萃取柱(HLB柱)富集净化,甲醇洗脱,然后转移至XBridge BEH C18色谱柱上,以10 mmol/L乙酸铵水溶液和乙腈溶液为流动相进行分离,最后用串联四极杆质谱检测。结果表明,10种大环内酯类抗生素在0.1~200μg/L范围内呈现良好的线性关系,相关系数均大于0.990。方法的检出限范围为0.05~0.30μg/kg,定量限范围为0.10~1.00μg/kg;添加水平为0.10~10.0μg/kg时,方法回收率为69.6%~115.2%,相对标准偏差(RSD)10%。该方法可以作为猪肉中大环内酯类抗生素的检测方法。     

Determination of flunitrazepam and 7-aminoflunitrazepam in human urine by on-line solid phase extraction liquid chromatography-electrospray-tandem mass spectrometry

A method using an on-line solid phase extraction (SPE) and liquid chromatography with electrospray-tandem mass spectrometry (LC-ES-MS/MS) for the determination of flunitrazepam (FM2) and 7-aminoflunitrazepam (7-aminoFM2) in urine was developed. A mixed mode Oasis HLB SPE cartridge column was utilized for on-line extraction. A reversed phase C₁₈ LC column was employed for LC separation and MS/MS was used for detection. Sample extraction, clean-up and elution were performed automatically and controlled by a six-port valve. Recoveries ranging from 94.8 to 101.3% were measured. For both 7-aminoFM2 and FM2, dual linear ranges were determined from 20 to 200 and 200-2000 ng/ml, respectively. The detection limit for each analyte based on a signal-to-noise ratio of 3 ranged from 1 to 3 ng/ml. The intra-day and inter-day precision showed coefficients of variance (CV) ranging from 4.6 to 8.5 and 2.6-9.2%, respectively. The applicability of this newly developed method was examined by analyzing several urine samples.     

Determination of 38 antibiotics in raw and treated wastewater from swine farms using liquid chromatography-mass spectrometry

The present study firstly aimed at developing a multi-residue method to identify and quantify 38 veterinary antibiotics (belonging to five different classes) not only for raw swine wastewater but also for wastewater differently treated by different units. The proposed method is based on a solid-phase extraction procedure and ultra high performance liquid chromatography with mass spectrometry. For sample preparation, the optimal loading sample volume was selected as 50 mL, the pH of which was adjusted to approximately 3.0 using formic acid. Then 0.1 g/L ethylenediaminetetraacetic acid disodium salt was added. The recovery rates for different types of wastewaters were in the range of 35.94–124.51% and the relative standard deviations were in the range of 0.36–14.62%. All the matrix standard curves exhibited high linearity (0.9956–0.9999). The matrix effects for the target antibiotics ranged from –61.73 to +148.75%. To ensure the practicality of the method, we performed the detection of the actually added concentration to determine method detection limits and quantitation limits. The quantitation limits of most of the target antibiotics were 0.04 μg/L, except for spiramycin (0.1 μg/L) and roxithromycin (0.2 μg/L). This optimized and validated method was applied to analyze antibiotic residues in swine water samples from four swine farms.     

磁性固相萃取-高效液相色谱-串联质谱法测定环境水样中的四环素类抗生素

建立了磁性固相萃取-高效液相色谱-串联质谱同时测定环境水样中四环素类抗生素的方法。以6种四环素类抗生素(差向四环素、土霉素、四环素、去甲金霉素、金霉素和脱水四环素)为目标化合物,考察并优化了吸附和解吸条件,确定了最佳萃取条件。萃取后的目标化合物经ZORBAX Eclipse Plus C₁₈柱分离,用高效液相色谱-串联质谱在多反应监测(MRM)模式下进行检测。在优化的条件下,6种四环素在1~100 μg/L范围内线性关系良好,线性相关系数为0.9967~0.9993,检出限为2.44~25.21 ng/L,样品加标回收率为80.6%~90.0%,日内相对标准偏差(RSDs)为0.6%~2.5%,日间RSDs为1.1%~7.1%。该方法灵敏度高、背景干扰低,适用于环境水样中6种痕量四环素类抗生素的同时检测。     

On-line selective solid-phase extraction of 4-nitrophenol with β-cyclodextrin bonded silica

The selective analysis of 4-nitrophenol (4-NP) from water samples using on-line solid-phase extraction (SPE) coupled to HPLC system was studied. The β-cyclodextrin bonded silica (CDS) was utilized as the selective sorbent. Using 100 ml of sample solution spiked with 4-nitrophenol and other six phenols (Ph) in double distilled water, the sorbent showed strong capacity in adsorbing 4-nitrophenol and the recovery was 104% with the detection limit of 0.017 μg/l. The selectivity was investigated by utilizing a washing step with acetonitrile after preconcentration and only 4-nitrophenol was detected with the recovery of 99%. Donghu lake (Wuhan, China) water sample was used to test the on-line SPE-HPLC system and 4-nitrophenol was selectively extracted with the recovery obtained as 90%.     

Interfacing on-line solid phase extraction with monolithic column multisyringe chromatography and chemiluminescence detection: An effective tool for fast, sensitive and selective determination of thiazide diuretics

A new, multisyringe flow injection set-up has been developed for the completely automated determination of trace thiazide compounds with diuretic action in different types of samples. The proposed instrumental set-up exploits for the first time, a low pressure on-line solid phase extraction-liquid chromatography-chemiluminescence detection method. This novel combination of sample treatments in flow systems expands the current applicability of low pressure liquid chromatography due to the isolation/preconcentration of the target compounds, besides high selectivity and sensitivity.For the determination of three thiazide compounds named hydroflumethiazide, furosemide and bendroflumethiazide, the proposed set-up provided with the preconcentration of only 1 mL of sample, limits of detection of 3, 60 and 40 μg L⁻¹, respectively. Furthermore wide linear dynamic ranges of 6-4000, 140-20,000 and 90-40,000 μg L⁻¹, respectively, were obtained. Besides of this, a high injection throughput of 12 h⁻¹ was also achieved. As in sports, thiazide diuretics are prohibited substances, the proposed method has been applied to their determination in urine samples. Furthermore the potential of the proposed method as a fast-screening approach for emerging contaminants in waters has been also tested by applying it to well water and leachates from a solid waste landfill.     

Molecularly imprinted on-line solid-phase extraction combined with chemiluminescence for the determination of pazufloxacin mesilate

A novel molecularly imprinted polymer solid-phase extraction (MISPE) with flow-injection chemiluminescence (CL) was developed for the determination of pazufloxacin mesilate (PZFX). The molecularly imprinted polymer (MIP) was synthesized by using PZFX as the imprinting molecule. A glass tube packed the particles of the MIP was employed as MISPE micro-column, which was connected into the sampling loop of the eight-way injection valve for on-line selective preconcentration and extraction of PZFX. The eluent of acetonitrile:acetic acid (9:1, v:v) was used as carrier for eluting the adsorbed PZFX to react with the mixture of cerium(IV) and sodium sulfite in the flow cell to produce strong CL. The relative intensity of CL was linear to PZFX concentration in the range from 2.5 × 10⁻⁹ to 2.5 × 10⁻⁷ g mL⁻¹. The limit of detection was 7 × 10⁻¹⁰ g mL⁻¹ (3 σ) and the relative standard deviation for 5 × 10⁻⁸ g mL⁻¹of PZFX solution was 3.7% (n = 7). This method has been applied to the determination of PZFX in human urine.     

Determination of tellurium at ultra-trace levels in drinking water by on-line solid phase extraction coupled to graphite furnace atomic absorption spectrometer

In this paper, two time-based flow injection (FI) separation pre-concentration systems coupled to graphite furnace atomic absorption spectrometry (GFAAS) for tellurium determination are studied and compared. The first alternative involves the pre-concentration of the analyte onto Dowex 1X8 employed as packaging material of a micro-column inserted in the flow system. The second set-up is based on the co-precipitation of tellurium with La(OH)₃ followed by retention onto XAD resins. Both systems are compared in terms of limit of detection, linear range, RSD%, sample throughput, micro-columns lifetime and aptitude for fully automatic operation.     

Determination of cephalosporin antibiotics in water samples by optimised solid phase extraction and high performance liquid chromatography with ultraviolet detector

A reliable and robust analytical method based on solid phase extraction (SPE) and high performance liquid chromatography (HPLC) with ultraviolet (UV) detector was developed for the simultaneous determination of five cephalosporin antibiotics (Ceftazidime, Cefradine, Cefaclor, Cefotaxime and Cefoperazone) in various water samples. Under optimised conditions, it was applicable to preconcentrate up to 500?ml of water samples in the OASIS HLB cartridges with reasonable recoveries for all the cephalosporin antibiotics tested. Recoveries were as follows: deionised water, tap water and groundwater, between 84.2 and 98.9%; surface water, between 71.2 and 81.0%; influent and effluent of wastewater treatment plant (WWTP), between 56.9 and 72.1%. The method detection limits (MDLs) for different water samples were in the range of 26 to 59?ng?l^?1. Real water samples were analysed using the proposed approach to demonstrate the applicability and validation. Negative results were obtained for the tap water and groundwater. However, all the selected cephalosporin antibiotics were identified in the influent and effluent of a local WWTP at ng?l^?1–µg?l^?1 level. In addition, Ceftazidime was found in surface water with a concentration of 0.75–2.60?µg?l^?1. The results indicate that the ‘pseudo-persistent’ contamination of cephalosporin antibiotics in the water environment could not be neglected.     

Evaluation of mixed mode solid phase extraction cartridges for the preconcentration of beta-lactam antibiotics in wastewater using liquid chromatography with UV-DAD detection

A novel and simple method has been developed for the simultaneous determination of beta-lactam antibiotics (BLAs) (penicillin G, amoxicillin, ampicillin, penicillin V, oxacillin, cloxacillin, dicloxacillin and nafcillin) in wastewater. The method is based on solid-phase extraction (SPE) and high performance liquid chromatography with UV-diode array detection (UV-DAD). Two SPE cartridges have been compared for sample clean up and preconcentration: a reversed-phase silica-based cartridge (Bond Elut C₁₈, Varian Inc.) and a strong polymeric mixed mode anion exchanger (Oasis MAX, Waters). The penicillins have been separated using a LUNA™ C₁₈ (2) (150 mm × 4.6 mm, 5 μm) HPLC column and gradient elution with mobile phases consisting of aqueous trifluoroacetic acid and acetonitrile. The analytical wavelength was set at 220 nm. Under optimised conditions it was possible to preconcentrate up to 1000 mL of Milli-Q water in the Oasis MAX cartridges with recoveries in the range 82-97% (R.S.D. 2-9%) for all the antibiotic tested, except amoxicillin (52%, R.S.D. 8%), and limits of detection in the range of 8-24 ng L⁻¹. The matrix components in industrial and urban wastewater samples reduce the preconcentration efficiency in both sorbents, especially for the Bond Elut C₁₈. The use of the Oasis MAX allowed detection limits between 2.9-25.6, 2.5-12.4 and 2.2-12.7 μg L⁻¹, when processing 250 mL of industrial, influent and effluent sewage treatment plant (STP) samples. Recoveries ranged between 46-91, 28-91 and 39-114% (industrial, influent and effluent STP, respectively) for samples spiked with all the antibiotics at 25 and 75 μg L⁻¹ (n = 3 for each level).     

固相萃取地表水中痕量联苯胺及HPLC-MS测定

采用固相萃取及高效液相色谱-串联质谱技术,建立了地表水中痕量联苯胺的测定方法.水样经HLB固相萃取柱富集,二氯甲烷与丙酮(1:1,v/v)洗脱,氮吹后转为甲醇溶剂,以液相色谱串联质谱选择离子监测(SRM)模式定性、定量分析.在本实验条件下,加标回收率在72.0%～94.0%之间,相对标准偏差8.1%～9.8%(n=7)...