近红外光谱法测定5-羟基色氨酸的含量

本文利用近红外光谱法建立了5-羟基色氨酸的偏最小二乘(PLS)定量模型。采用相关数法选择波段以及二阶导数、Norris derivative平滑滤波进行数据预处理,所建校正模型的R为0.99907,RMSEC为0.0638,RMSEP为0.0675。经验证模型的预测性能良好,为5-HTP的快速测定提供了一种方法。     

Development of Near Infrared Spectroscopy for Rapid Quality Assessment of Red Ginseng

Near infrared spectroscopy(NIRS) was developed as a rapid analysis method for the qualitative and quantitative assessment of the quality of red ginseng. Discriminant analysis(DA) based on principal component analysis and Mahalanobis distance was used to distinguish red ginseng from counterfeits non-destructively. The result shows that the proposed method could distinguish red ginseng from counterfeits correctly and no misclassified sample was found in both training and test sets. The partial least squares(P...     

Near infrared spectroscopic imaging assessment of cartilage composition: Validation with mid infrared imaging spectroscopy

Disease or injury to articular cartilage results in loss of extracellular matrix components which can lead to the development of osteoarthritis (OA). To better understand the process of disease development, there is a need for evaluation of changes in cartilage composition without the requirement of extensive sample preparation. Near infrared (NIR) spectroscopy is a chemical investigative technique based on molecular vibrations that is increasingly used as an assessment tool for studying cartilage composition. However, the assignment of specific molecular vibrations to absorbance bands in the NIR spectrum of cartilage, which arise from overtones and combinations of primary absorbances in the mid infrared (MIR) spectral region, has been challenging. In contrast, MIR spectroscopic assessment of cartilage is well-established, with many studies validating the assignment of specific bands present in MIR spectra to specific molecular vibrations. In the current study, NIR imaging spectroscopic data were obtained for compositional analysis of tissues that served as an in vitro model of OA. MIR spectroscopic data obtained from the identical tissue regions were used as the gold-standard for collagen and proteoglycan (PG) content. MIR spectroscopy in transmittance mode typically requires a much shorter pathlength through the sample (≤10 microns thick) compared to NIR spectroscopy (millimeters). Thus, this study first addressed the linearity of small absorbance bands in the MIR region with increasing tissue thickness, suitable for obtaining a signal in both the MIR and NIR regions. It was found that the linearity of specific, small MIR absorbance bands attributable to the collagen and PG components of cartilage (at 1336 and 856 cm⁻¹, respectively) are maintained through a thickness of 60 μm, which was also suitable for NIR data collection. MIR and NIR spectral data were then collected from 60 μm thick samples of cartilage degraded with chondroitinase ABC as a model of OA. Partial least squares (PLS) regression using NIR spectra as input predicted the MIR-determined compositional parameters of PG/collagen within 6% of actual values. These results indicate that NIR spectral data can be used to assess molecular changes that occur with cartilage degradation, and further, the data provide a foundation for future clinical studies where NIR fiber optic probes can be used to assess the progression of cartilage degradation.     

Discrimination of Scrophulariae Radix according to geographical origin and determination of active constituents by near infrared spectroscopy (NIRS)

The potential of near infrared reflectance spectroscopy (NIR) was investigated for its ability to non-destructively discriminate the geographic origins of Scrophularia spp., Andong, Uisung and China. Application of principal component analysis to NIR spectra leads to a clear separation of Andong sample from the others. Moreover, the contents of two neuroprotective constituents of Scrophularia spp., 8-O-(E-p-methoxycinnamoyl)-harpagide (HG), and E-p-methoxycinnamic acid (MCA), were determined by HPLC-DAD. Partial least squares (PLS) regression of NIR spectra combined with these analytical reference data yield the development of calibration models for the contents of the two constituents. The correlation coefficients of prediction models for HG and MCA were > 0.87. These outcomes indicated that the NIRS could be useful for the discrimination of Scrophularia spp.     

近红外光谱法非破坏性同时测定海洛因、O6单乙酰吗啡、乙酰可待因

提出了近红外漫反射光谱快速无损测定缴获白粉中海洛因、O6单乙酰吗啡、乙酰可待因含量新方法。采用GC-MS分析了缴获88份白粉中这3组分的质量百分含量范围分别为12.15%~79.54%,0.4%~18.56%,0.23%~9.11%。以交叉验证误差均方根(RMSECV)为指标,确定各组分用于建模的最优近红外波段和光谱预处理方法,采用偏最小二乘算法建立近红外光谱与这三组分GC-MS分析值之间的校正模型,并以此预测了35个白粉样本。δ代表预测样本NIR值/GC-MS值,海洛因、O6单乙酰吗啡、乙酰可待因δ值的均值为100.63%,100.35%和98.71%,RSD分别为3.96%,7.02%,8.54%。该方法快速无损,结果可靠。     

Comparison of near-infrared and mid-infrared spectroscopy for the determination of distillation property of kerosene

Near-infrared (NIR) and mid-infrared (MIR) spectroscopy have been compared and evaluated for the determination of the distillation property of kerosene with the use of partial least squares (PLS) regression. Since kerosene is a complex mixture of similar hydrocarbons, both spectroscopic methods will be best evaluated with this complex sample matrix. PLS calibration models for each percent recovery temperature have been developed by using both NIR and MIR spectra without spectral pretreatment. Both methods have shown good correlation with the corresponding reference method, however NIR provided better calibration performance over MIR. To rationalize the improved calibration performance of NIR, spectra of the same kerosene sample were continuously collected and the corresponding spectral reproducibility was evaluated. The greater spectral reproducibility including signal-to-noise ratio of NIR led to the improved calibration performance, even though MIR spectroscopy provided more qualitative spectral information. The reproducibility of measurement, signal-to-noise ratio, and richness of qualitative information should be simultaneously considered for proper selection of a spectroscopic method for quantitative analysis.     

近红外光谱法快速测定生物柴油调和比及理化指标

通过比较偏最小二乘法(PLS)处理调和生物柴油近红外光谱图与标准方法测定调和生物柴油所获得的基础数据,确立了调和生物柴油的调和比、密度、运动黏度、热值、闭口闪点及冷凝点之间的相互关系。结果表明:经优化后,在OPUS光谱分析软件推荐维数(Rank)下,各指标模型的预测值与标准测定值之间线性相关关系均显著。在用于测定未知调和生物柴油样品的上述指标方面具有测定快速简便、误差小、成本低等优点,并用马氏距离限制异常项,每份生物柴油各指标的马氏距离都处于允许范围内。对于新类型生物柴油,可向模型添加10个以上调配样本,扩充模型后即可用于测定这类型调和生物柴油相关理化指标,可成为测定调和生物柴油相关理化指标新方法。在此基础上,可进一步开发出生物柴油近红外光学理化指标测定仪,实现低成本与快速测定。     

Combining synchronous fluorescence spectroscopy with multivariate methods for the analysis of petrol-kerosene mixtures

Synchronous fluorescence spectroscopy (SFS) is a rapid, sensitive and nondestructive method suitable for the analysis of multifluorophoric mixtures. The present study demonstrates the use of SFS and multivariate methods for the analysis of petroleum products which is a complex mixture of multiple fluorophores. Two multivariate techniques principal component regression (PCR) and partial least square regression (PLSR) have been successfully applied for the classification of petrol-kerosene mixtures. Calibration models were constructed using 35 samples and their validation was carried out with varying composition of petrol and kerosene in the calibration range. The results showed that the method could be used for the estimation of kerosene in kerosene-mixed petrol. The model was found to be sensitive, detecting even 1% contamination of kerosene in petrol.     

多模型共识偏最小二乘法用于近红外光谱定量分析

将多模型共识偏最小二乘法用于近红外光谱定量分析。利用随机抽取的训练子集建立一系列偏最小二乘模型,选取其中性能较好的部分模型作为成员模型,用这些成员模型来预测未知样品。将该方法用于一组生物样本的近红外光谱与样品中人血清白蛋白、γ-球蛋白以及葡萄糖含量之间的建模研究,并与单模型偏最小二乘法了进行比较。结果 PLS对独立测试集中三种组分进行50次重复预测的平均RMSEP分别为0.1066,0.0853和0.1338,RMSEP的标准偏差分别为0.0174,0.0144和0.0416;而本方法重复预测的平均RMSEP分别为0.0715,0.0750和0.0781,RMSEP的标准偏差分别为0.0033,0.2729×10-4和0.0025。     

Application of near infrared spectroscopy and multivariate data analysis for the evaluation of glue lines of untreated and copper azole treated laminated timber before and after ageing

The necessity for inspection and assessment of glued laminated timber structures in service has raised interest in the evaluation of the glue lines. Glue line spectra were analysed and are discussed in detail with respect to spectral contributions from the adhesive, the hardener, the wood lamella below the adhesive, the curing temperature as well as ageing-related spectral changes. The combination of near infrared (NIR) spectroscopy and principal component analysis (PCA) allowed distinguishing between aged and non-aged samples and different copper azole preservative treatment levels of phenol-resorcinol-formaldehyde (PRF) glue lines. NIR-based partial least squares (PLS) regression modelling was performed for the glue line shear strength and for the curing temperature. These findings show that NIR spectroscopy is a fast and useful technique to evaluate the degradation on the PRF glue lines of untreated and copper azole treated laminated timber.     

Determination of effective wavelengths for discrimination of fruit vinegars using near infrared spectroscopy and multivariate analysis

Near infrared (NIR) spectroscopy based on effective wavelengths (EWs) and chemometrics was proposed to discriminate the varieties of fruit vinegars including aloe, apple, lemon and peach vinegars. One hundred eighty samples (45 for each variety) were selected randomly for the calibration set, and 60 samples (15 for each variety) for the validation set, whereas 24 samples (6 for each variety) for the independent set. Partial least squares discriminant analysis (PLS-DA) and least squares-support vector machine (LS-SVM) were implemented for calibration models. Different input data matrices of LS-SVM were determined by latent variables (LVs) selected by explained variance, and EWs selected by x-loading weights, regression coefficients, modeling power and independent component analysis (ICA). Then the LS-SVM models were developed with a grid search technique and RBF kernel function. All LS-SVM models outperformed PLS-DA model, and the optimal LS-SVM model was achieved with EWs (4021, 4058, 4264, 4400, 4853, 5070 and 5273 cm⁻¹) selected by regression coefficients. The determination coefficient (R²), RMSEP and total recognition ratio with cutoff value ±0.1 in validation set were 1.000, 0.025 and 100%, respectively. The overall results indicted that the regression coefficients was an effective way for the selection of effective wavelengths. NIR spectroscopy combined with LS-SVM models had the capability to discriminate the varieties of fruit vinegars with high accuracy.     

近红外光谱法分析土壤中的有机质和氮素

应用近红外光谱技术测定土壤中的全氮、有机质、碱解氮，分别测定了2mm、0.15mm粒度的风干土在4000cm^-1～12000cm^-1波数范围的近红外光谱，用偏最小二乘法建立数学模型来进行含量预测，结果表明近红外光谱与土壤有机质、全氮、碱解氮具有良好的相关性，2mm风干土碱解氮建模的决定系数R^2为92.39，相对标准偏差为7.5%；2mm风干土全氮建模的决定系数R^2为88，相对标准偏差为8.2%;0.15mm的全氮建模的决定系数R2为89.86，相对标准偏差为7.2%;0.15mm风干土有机质建模的决定系数R^2为96.41，相对标准偏差为8.3%。因此，用近红外光普法测定土壤有机质、全氮、碱解氮的含量是可行的。     

偏最小二乘-反向传播-近红外光谱法同时测定饲料中4种氨基酸

偏最小二乘与人工神经网络联用对70个饲料样品建立起天门冬氨酸(Asp)、谷氨酸(Glu)、丝氨酸(Ser)和组氨酸(His)4种氨基酸含量的预测校正模型,以样品平行扫描光谱验证校正模型预测的准确性和重现性。用偏最小二乘法将原始数据压缩为主成分,采用单隐层的反向传播网络建模。取前3个主成分的12个数据输入网络,以Kolmogorov定理为依据,经过实验确定中间层的神经元个数为25,初始训练迭代次数为1000。偏最小二乘-反向传播网络模型对样品4个组分含量的预测决定系数(R2)分别为:0.981、0.997、0.979、0.946;样品平行扫描光谱预测值的标准偏差分别为:0.020、0.029、0.017、0.023。本研究为近红外快速检测在组分含量较低的样品实现多组分同时测定提供了思路。     

Crude Oil Model Emulsion Characterised by means of Near Infrared Spectroscopy and Multivariate Techniques

Water-in-oil emulsions are investigated by means of multivariate analysis of near infrared (NIR) spectroscopic profiles in the range 1100 — 2250 nm. The oil phase is a paraffin-diluted crude oil from the Norwegian Continental Shelf. The influence of water absorption and light scattering of the water droplets are shown to be strong. Despite the strong influence of the water phase, the NIR technique is still capable of predicting the composition of the investigated oil phase.     

Characterization of Chickpea Flour by Near Infrared Spectroscopy and Chemometrics

Near infrared (NIR) spectrometry was used for the rapid characterization of quality parameters in desi chickpea flour (besan). Partial least square regression, principal component regression (PCR), interval partial least squares (iPLS), and synergy interval partial least squares (siPLS) were used to determine the protein, carbohydrate, fat, and moisture concentrations of besan. Spectra were collected in reflectance mode using a lab-built predispersive filter-based instrument from 700 to 2500?nm. The quality parameters were also determined by standard methods. The root mean square error (RMSE) for the calibration and validation sets was used to evaluate the performance of the models. The correlation coefficients for moisture, fat, protein, and carbohydrates in chickpea flour exceeded 0.96 using PLS and PCR models using the full spectral range. Wavelengths from 2100 to 2345?nm had the lowest RMSE for quality parameters by iPLS. The error was further decreased by 0.41, 0.1, and 1.1% for carbohydrates, fats, and proteins by siPLS. The NIR spectral regions yielding the lowest RMSE of prediction were 1620–2345?nm for carbohydrates, 1180–1590?nm and 1860–2094?nm for fat, and 1700–2345?nm for proteins. The study shows that chickpea flour quality parameters were accurately determined using the optimized wavelengths.     

Use of NIRS technology with a remote reflectance fibre-optic probe for predicting mineral composition (Ca,K, P,Fe, Mn,Na, Zn), protein and moisture in alfalfa

In the present work we study the use of near-infrared spectroscopy (NIRS) technology together with a remote reflectance fibre-optic probe for the analysis of major (Ca, K, P) and minor (Fe, Mn, Na, Zn) elements, protein and moisture in alfalfa. The method allows immediate analysis of the alfalfa without prior sample treatment or destruction through direct application of the fibre-optic probe on ground samples in the case of the mineral composition and on-ground and compacted (baled) samples in the case of protein and humidity. The regression method employed was modified partial least-squares (MPLS). The calibration results obtained using samples of alfalfa allowed the determination of Ca, K, P, Fe, Mn, Na and Zn, with a standard error of prediction (SEP(C)) and a correlation coefficient (RSQ) expressed in mg/kg of alfalfa of 1.37 × 10³ and 0.878 for Ca, 1.10 × 10³ and 0.899 for K, 227 and 0.909 for P, 103 and 0.948 for Fe, 5.1 and 0.843 for Mn, 86.2 and 0.979 for Na, and of 1.9 and 0.853 for Zn, respectively. The SEP(C) and RSQ values (in %) for protein and moisture in ground samples were 0.548 and 0.871 and 0.150 and 0.981, respectively; while in the compacted samples they were 0.564 and 0.826 and 0.262 and 0.935, respectively. The prediction capacity of the model and the robustness of the method were checked in the external validation in alfalfa samples of unknown composition, and the results confirmed the suitability of the method.     

Chemometric models for the quantitative descriptive sensory analysis of Arabica coffee beverages using near infrared spectroscopy

Mathematical models based on chemometric analyses of the coffee beverage sensory data and NIR spectra of 51 Arabica roasted coffee samples were generated aiming to predict the scores of acidity, bitterness, flavour, cleanliness, body and overall quality of coffee beverage. Partial least squares (PLS) were used to construct the models. The ordered predictor selection (OPS) algorithm was applied to select the wavelengths for the regression model of each sensory attribute in order to take only significant regions into account. The regions of the spectrum defined as important for sensory quality were closely related to the NIR spectra of pure caffeine, trigonelline, 5-caffeoylquinic acid, cellulose, coffee lipids, sucrose and casein. The NIR analyses sustained that the relationship between the sensory characteristics of the beverage and the chemical composition of the roasted grain were as listed below: 1 - the lipids and proteins were closely related to the attribute body; 2 - the caffeine and chlorogenic acids were related to bitterness; 3 - the chlorogenic acids were related to acidity and flavour; 4 - the cleanliness and overall quality were related to caffeine, trigonelline, chlorogenic acid, polysaccharides, sucrose and protein.     

Determination of Nitrogen in Rapeseed by Fourier Transform Infrared Photoacoustic Spectroscopy and Independent Component Analysis

Fourier-transform mid-infrared photoacoustic spectroscopy was utilized for rapid and nondestructive determination of nitrogen in rapeseeds. Rapeseed spectra were characterized by independent component analysis for quantitative calibration. A calibration model was built by using independent components as the input for partial least squares. Compared to full-spectrum partial least squares, the combined model achieved higher prediction accuracy with a residual predictive deviation of 2.06. Moreover, a genetic algorithm coupled with partial least squares was adopted to optimize the independent components for partial least square modeling and provide a further refined model with the highest residual predictive deviation of 2.12. A t-test verified a high congruence between results obtained by calibration models and the reference Kjeldahl method. This study demonstrated the promise of Fourier-transform mid-infrared photoacoustic spectroscopy for the determination of nitrogen in rapeseeds and the applicability of independent components for multivariate calibration.     

同时测定水溶液中葡萄糖、果糖和蔗糖的近红外光谱法

通过对27个葡萄糖、果糖和蔗糖水溶液的混合体系进行近红外光谱分析，建立了葡萄糖、果糖和蔗糖含量测定的偏最小二乘法(PLS)模型；葡萄糖、果糖和蔗糖的线性范围分别为0—300g/L、0—200g/L、0—300g/L，模型校正集的标准误差(SEC)分别为1．4、1．8、1．4g/L；用该模型对6个样品进行分析，葡萄糖、果糖和蔗糖含量测定的相对标准偏差(RSD)分别为1．2％、2．6％和1．8％。     

中红外、近红外和拉曼光谱法测定商品农药制剂中氰戊菊酯和马拉硫磷的含量

利用近红外、中红外和拉曼光谱法定量分析了商品农药制剂中有效成分氰戊菊酯和马拉硫磷的含量.采用偏最小二乘法(Partial least squares,PLS)建立氰戊菊酯和马拉硫磷的定量模型并进行了优化,用独立检验集对模型适应性进行评价.近红外和中红外法测定氰戊菊酯、马拉硫磷定量模型的相关系数分别是0.9981,0.9994和0.9946,0.9998,外部验证集标准差分别是0.082,0081和0.092,0.075,两种方法的定量效果接近;拉曼法氰戊菊酯和马拉硫磷定量模型的相关系数分别为0.9872和0.9993,外部验证集标准差分别为0.254和0.317,预测精度不及近红外和中红外法高.MIR-ATR,NIR和Raman 3种方法均能满足现场检测农药质量的需要.