Roles of dynamic metal speciation and membrane permeability in metal flux through lipophilic membranes: general theory and experimental validation with nonlabile complexes

The study of the role of dynamic metal speciation in lipophilic membrane permeability in aqueous solution requires accurate interpretation of experimental data. To meet this goal, a general theory is derived for describing 1:1 metal complex flux, under steady-state and ligand excess conditions, through a permeation liquid membrane (PLM). The theory is applicable to fluxes through any lipophilic membrane. From this theory, fluxes in the three rate-limiting conditions for metal transport are readily derived, corresponding, namely, to (i) diffusion in the source solution, (ii) diffusion in the membrane, and (iii) the chemical kinetics of formation/dissociation of the metal complex in the interfacial reaction layer. The theory enables discussion of the reaction layer concept in a more general frame and also provides unambiguous criteria for the definition of an inert metal complex. The theoretical flux equations for fully labile complexes were validated in a previous paper. The general theory for semi- or nonlabile complexes is validated here by studying the flux of Pb(II) through PLMs in contact with solutions of Pb(II)-NTA and Pb(II)-TMDTA at different pHs and flow rates.     

Speciation of Cu(II) with a flow-through permeation liquid membrane: discrimination between free copper, labile and inert Cu(II) complexes, under natural water conditions

Metal toxicity is not related to the total metal ion concentration, but to those of some specific Cu(II) species. The Permeation Liquid Membrane technique is based on the carrier-mediated transport of the test metal across a hydrophobic membrane and enables discrimination between various trace metal species in solution. The present work shows how the labile and inert Cu(II) complexes can be determined selectively, by varying the flow-rate of the test solution, in a flow-through cell. A mathematical model of metal flux through the PLM, based on diffusion-limited transport under steady-state conditions, is described. The model and the performance of the technique were studied in well-defined synthetic solutions containing simple organic hydrophilic ligands forming either inert (nitrilotriacetic acid), or labile complexes with Cu(II) (tartaric acid, malonic acid). The results were compared with theoretical predictions of thermodynamic species distribution in solution. Uncertainties on stability constants for copper speciation calculation were taken into account. The detection limits of the device are discussed. This work demonstrates that the flow-through cell is a reliable tool for copper speciation measurements in natural waters.     

Thermal properties of some complexes of quinolinic acid with divalent metal ions

Studies of the complexes of pyridinecarboxylic acids with divalent metal ions as a function of the position of the carboxyl groups were extended. The thermal properties of the complexes of quinoline acid (pyridine-2,3-dicarboxylic acid) with several divalent metal ions were determined by thermogravimetry (TG) and differential thermal analysis (DTA). A correlation between these compounds and others obtained by reaction between the studied metal ions with similar acids (lutidinic acid (pyridine-2,4-dicarboxylic acid) and isocinchomeronic acid (pyridine-2,5-di-carboxylic acid) is discussed in terms of the position of the carboxyl group far from the aza group. The thermal stability of the metal complexes is in the order Mn(II) > Fe(II) > Zn(II) ? Co(II) > Ni(II) > Cu(II).     

Preconcentration of Cr(III), Co(II), Cu(II), Fe(III) and Pb(II) as calmagite chelates on cellulose nitrate membrane filter prior to their flame atomic absorption spectrometric determinations

A method for the preconcentration and determination of Cr(III), Co(II), Cu(II), Fe(III) and Pb(II) ions by atomic absorption spectrometry has been described. The method was based the collection of metal-calmagite complexes on a soluble cellulose nitrate membrane filter. The detection of the solution was obtained by flame atomic absorption spectrometry (FAAS) after completely dissolving the membrane with 0.5 ml of nitric acid at 80 degrees C. The metal ions were recovered quantitatively at pH 8. Various factors which affect the collection and determination of metal ions such as, type and size of the membrane filter, solvent for dissolution of the species retained on the filter were investigated. The detection limits were varying 0.06 mug l(-1) for Cu to 2.5 mug l(-1) for Cr. An application of the proposed method for analyte ions in mineral and tap water samples was also described with satisfactory results (recoveries >95%, relative standard deviations <10%).     

Hydroxamic Acids and Their Metal Complexes Obtained in situ as Electrode-Active Components in the Membranes of Ion-Selective Electrodes

Metal complexes with a hydroxamic acid, namely, N-phenyl-N-(3-styrylacryloyl)hydroxylamine (PSAHA), are promising reagents for use in the preparation of cation- and anion-selective electrodes. The in situ formation of metal complexes by membrane conditioning in a solution of an appropriate metal salt made it possible to prepare cation-selective electrodes for methyl ester of phenylalanine (UO²⁺ ₂) and anion-selective electrodes for tryptophan, phenylalanine (Sn(IV)), and aspartic acid (Cu(II)). The PSAHA-based membrane is sensitive to nitrate ions in solutions of uranyl nitrate (the metal complex is formed in the membrane even without special conditioning).     

Spectral characterization, cyclic voltammetry, morphology, biological activities and DNA cleaving studies of amino acid Schiff base metal(II) complexes

Metal complexes are synthesized with Schiff bases derived from o-phthalaldehyde (opa) and amino acids viz., glycine (gly) l-alanine (ala), l-phenylalanine (pal). Metal ions coordinate in a tetradentate or hexadentate manner with these N(2)O(2) donor ligands, which are characterized by elemental analysis, molar conductance, magnetic moments, IR, electronic, (1)H NMR and EPR spectral studies. The elemental analysis suggests the stoichiometry to be 1:1 (metal:ligand). Based on EPR studies, spin-Hamiltonian and bonding parameters have been calculated. The g-values calculated for copper complexes at 300K and in frozen DMSO (77K) indicate the presence of the unpaired electron in the dx2-y2 orbital. The evaluated metal-ligand bonding parameters showed strong in-plane sigma- and pi-bonding. X-ray diffraction (XRD) and scanning electron micrography (SEM) analysis provide the crystalline nature and the morphology of the metal complexes. The cyclic voltammograms of the Cu(II)/Mn(II)/VO(II) complexes investigated in DMSO solution exhibit metal centered electroactivity in the potential range -1.5 to +1.5V. The electrochemical data obtained for Cu(II) complexes explains the change of structural arrangement of the ligand around Cu(II) ions. The biological activity of the complexes has been tested on eight bacteria and three fungi. Cu(II) and Ni(II) complexes show an increased activity in comparison to the controls. The metal complexes of opapal Schiff base were evaluated for their DNA cleaving activities with calf-thymus DNA (CT DNA) under aerobic conditions. Cu(II) and VO(II) complexes show more pronounced activity in presence of the oxidant.     

Polymer supported catalysts for oxidation of phenol and cyclohexene using hydrogen peroxide as oxidant

Polymer supported transition metal complexes of N,N′-bis (o-hydroxy acetophenone) hydrazine (HPHZ) Schiff base were prepared by anchoring its amino derivative Schiff base (AHPHZ) on cross-linked (6 wt%) polymer beads and then loading iron(III), copper(II) and zinc(II) ions in methanol. The loading of HPHZ Schiff base on polymer beads was 3.436 mmol g⁻¹ and efficiency of complexation of polymer anchored HPHZ Schiff base for iron(III), copper(II) and zinc(II) ions was 83.21, 83.40 and 83.17%, respectively. The efficiency of complexation of unsupported HPHZ Schiff base for these metal ions was lower than polymer supported HPHZ Schiff base. The structural information obtained by spectral, magnetic and elemental analysis has suggested octahedral and square planar geometry for iron(III) and copper(II) ions complexes, respectively, with paramagnetic behavior, but zinc(II) ions complexes were tetrahedral in shape with diamagnetic behavior. The complexation with metal ions has increased thermal stability of polymer anchored HPHZ Schiff base. The catalytic activity of unsupported and polymer supported HPHZ Schiff base complexes of metal ions was evaluated by studying the oxidation of phenol (Ph) and epoxidation of cyclohexene (CH). The polymer supported metal complexes showed better catalytic activity than unsupported metal complexes. The catalytic activity of metal complexes was optimum at a molar ratio of 1:1:1 of substrate to oxidant and catalyst. The selectivity for catechol (CTL) and epoxy cyclohexane (ECH) in oxidation of phenol and epoxidation of cyclohexene was better with polymer supported metal complexes in comparison to unsupported metal complexes. The energy of activation for oxidation of phenol (22.8 kJ mol⁻¹) and epoxidation of cyclohexene (8.9 kJ mol⁻¹) was lowest with polymer supported complexes of iron(III) ions than polymer supported Schiff base complexes of copper(II) and zinc(II) ions.     

Metal complexes of 4-(2'-thiazolylazo)-resorcinol A comparative study with 4-(2'-pyridylazo)-resorcinol

The acid dissociation constants of 4-(2'-thiazolylazo)-resorcinol (TAR) and the formation constants of the metal complexes formed by this reagent with Cu(II), Ni(II), Co(II), Zn(II) and Mn(II) have been determined potentiometrically at 25° in 50% v/v mixtures of dioxane and water. The values obtained for TAR and the metal complexes are contrasted with similar values for the reagent 4-(2'-pyridylazo)-resorcinol (PAR). Differences and similarities between the co-ordinating tendencies of these two reagents are revealed in terms of the proton displacement constant and the acid dissociation constants of the metal complexes. Evidence is presented which suggests that both TAR and PAR may act as terdentate ligands toward some bivalent metal ions.     

Synthesis and spectroscopic,magnetic and cyclic voltammetric characterization of some metal complexes of methionine: [(C5H10NO2S)2MII]; MII = Mn(II), Co(II), Ni(II), Cu(II), Zn(II), Cd(II) and Hg(II)

Some metal complexes of DL–methionine were prepared in aqueous medium and characterized by different physico-chemical methods. Methionine forms 1:2 complexes with metal, M(II). The general empirical formula of the complexes is proposed as [(C₅H₁₀NO₂S)₂M^II]; where M^II = Mn(II), Co(II), Ni(II), Cu(II), Zn(II), Cd(II) and Hg(II). All the complexes are extremely stable in light and air and optically inactive. Magnetic susceptibility data of the complexes demonstrate that they are high spin paramagnetic complex except Zn(II), Cd(II) and Hg(II) complexes. The bonding pattern in the complexes are similar to each other as indicated by electronic absorption spectra and FTIR spectral analysis. The current potential data, peak separation (AE) and the peak current ratio (i_pa/i_pc) of the (Mn, Cu and Cd) complexes indicate that the charge transfer processes are irreversible, the systems are diffusion controlled and also adsorptive controlled. The charge transfer rate constant of metals in their complexes are less than those in their metal salts at identical experimental conditions due to the coordination of metal with methionine.     

Determination of trace metal speciation parameters by using screen-printed electrodes in stripping chronopotentiometry without deaerating

The objective of this study was to exploit the advantages of stripping chronopotentiometry (SCP) and stripping chronopotentiometry at scanned deposition potential (SSCP) for trace metal speciation analyses by using thin-film mercury screen-printed electrodes (TMF-SPE). At first, the SCP parameters were optimised for TMF-SPE, in order to reach the complete depletion regime. It has been shown that a stripping current higher than or equal to 10 μA allows this regime to be attained without removing oxygen from the solution.Then, these analytical conditions were used for the construction of SSCP curves for Cd-PDCA and Cd-NTA. When the concentration of free ligand in solution was known, the knowledge of the model describing the SSCP curves in absence and presence of a complex and the use of an effective fitting tool enabled estimating the stability constant and the rate constants for complexation. Further studies with complexes of restricted mobility are however necessary to assess the usefulness of this procedure to also estimate the diffusion coefficient of the complexes. Besides, this study showed that this approach was valid even when ligands were not in excess at the electrode during stripping.     

Coordination Behavior of N‐Donor Schiff Base Derived from 2‐Benzoylpyridine Toward Mn(II), Co(II), Ni(II), Cu(II), Zn(II), Pd(II), and Cr(III) Metal Ions: Synthesis,Spectroscopic and Thermal Studies,and Biological Activity

A new Schiff base was prepared from the reaction of 4,4′‐methylenedianiline with 2‐benzoylpyridine in 1:2 molar ratio, as well as its different metal chelates. The structures of the ligand and its metal complexes were studied by elemental analyses, spectroscopic methods (infrared [IR ], ultraviolet–visible [UV –vis], ¹H nuclear magnetic resonance [NMR ], electron spin resonance [ESR ]), magnetic moment measurements, and thermal studies. The ligand acts as tetradentate moiety in all complexes. Octahedral geometry was suggested for Mn(II ), Cu(II ), Cr(III ), and Zn(II ) chloride complexes and pentacoordinated structure and square planar geometry for Co(II ), Ni(II ), Cu(NO₃ )₂, CuBr₂ , and Pd(II ) complexes. ESR spectra of copper(II ) complexes ( 4 )–( 6 ) at room temperature display rhombic symmetry for complex ( 4 ) and axial type symmetry for complexes ( 5 ) and ( 6 ), indicating ground state for Cu(II ) complexes. The derivative thermogravimetric (DTG ) curves of the ligand and its metal complexes were analyzed by using the rate equation to calculate the thermodynamic and kinetic parameters, which indicated strong binding of the ligand with the metal ion in some complexes. Also, some of these compounds were screened to establish their potential as anticancer agents against the human hepatic cell line Hep‐G₂ . The obtained IC₅₀ value of the copper(II ) bromide complex (4.34 µg/mL ) is the highest among the compounds studied.     

Coordination polymers of glutaraldehyde with glycine metal complexes: synthesis,spectral characterization,and their biological evaluation

Glycine metal complexes were prepared by the reaction of glycine with Mn(II), Co(II), Ni(II), Cu(II), and Zn(II) in 1?:?2 molar ratio. Thereafter their condensation polymerization was done with glutaraldehyde to obtain polymer metal complexes. All the synthesized polymer metal complexes were characterized by elemental analysis, FT-IR, ¹H-NMR, and UV-Vis spectrometry, magnetic susceptibility, and thermogravimetric studies. The analytical data of all the polymers agreed with 1?:?1 molar ratio of metal complex to glutaraldehyde and magnetic moment data suggest that PGG–Mn(II), PGG–Co(II), PGG–Ni(II), and PGG–Cu(II) have an octahedral geometry around the metal atom, whereas the tetrahedral geometry was proposed for PGG–Zn(II) polymer. The PGG–Mn(II) and PGG–Cu(II) showed octahedral geometry. Thermal behavior of the polymer metal complexes was obtained at a heating rate of 10°C?min^?1 under nitrogen atmosphere from 0°C to 800°C. The antimicrobial activities of synthesized polymers were investigated against Streptococcus aureus, Escherichia coli, Bacillus sphaericus, Salmonella sp. (Bacteria), Fusarium oryzae, Candida albicans, and Aspergillus niger (Yeast).     

Volcano correlations between formal potential and Hammett parameters of substituted cobalt phthalocyanines and their activity for hydrazine electro-oxidation

In this work we have examined the effect of the Co(II)/(I) formal potential of cobalt phthalocyanines (CoPcs) on their catalytic activity for the electro-oxidation of hydrazine. The activity of the different phthalocyanines was examined using these complexes adsorbed on graphite electrodes. When activities for the different metal chelates are compared as a plot of logI (at constant potential) versus the Co(II)/(I) formal potential an asymmetric volcano curve is obtained. For some complexes the rate of the reaction increases very sharply with the driving force of the catalyst (measured as its formal potential) and then it decreases for higher driving forces. The same plot is obtained when plotting log I versus the sum of the Hammett parameters of the substituents on the periphery of the phthalocyanine ring.     

Non-aqueous,reversed-phase,high-performance,thin-layer chromatography and column liquid chromatography of metal complexes of porphine

Summary The chromatographic mobility of 21H, 23H-porphine and its Ni(II), Cu(II), Zn(II) and Pd(II) complexes were investigated by high-performance thin-layer chromatography on an octadecyl-bonded, silica gel plate with various polar organic solvents including alcohols, acetonitrile, dimethylsulfoxide and propylenecarbonate. The mobility generally decreases according to the central metal ion of the complex as follows: Zn(II)>(free porphine)>Ni(II)>Pd(II)>Cu(II). Methanol is a good choice of solvent for the separation of these metal porphine complexes. Successful separation of porphine and the four metal complexes is accomplished within 13 min on a LiChrosorb RP-18 column with methanol eluent.     

Synthesis and liquid crystal properties of copper(II) and palladium(II) chelates with new ferrocene-containing enaminoketones

Heterometallic liquid crystals are of special interest because of the possibility to combine optical, magnetic and electric properties of different metal ions in one mesogenic molecule. In order to investigate new heteropolynuclear mesogenic systems, a series of β-aminovinylketone ligands derived from acetyl ferrocene have been synthesized. Subsequently Cu(II) and Pd(II) ions were incorporated into the enaminoketone chelate core. The obtained ligands and complexes were characterized by element analysis, ¹H NMR, IR and UV–Vis spectroscopies. According to thermal polarizing microscopy and DSC studies, the ligands and Cu(II) complexes exhibit disordered soft crystal phases upon cooling from the isotropic liquid state. The Pd(II) complexes showed monotropic smectic C mesomorphism. The metal centres in the synthesized heteropolynuclear mesogens are in close vicinity to each other, which is of considerable interest from the viewpoint of the potential electron-transfer interactions between a ferrocene core and the central ions.     

Complete assignments of NMR data of salens and their cobalt (III) complexes

Salens, derived from 1,2‐ethylenediamine and salicylaldehydes, have been widely used as ligands for metal complexes which have been showing enormous potential in chemical properties of asymmetric catalysts as well as biological properties such as anticancer agents. Almost all of the salen–metal complexes with their corresponding metal (II)‐complexes show the evidences of chelation of two oxygens in salens. However, several metal (II) complexes, especially cobalt (II) complexes, could not show NMR spectra due to their paramagnetism. Recently, it has been reported that one of the cobalt (III) complexes was used for NMR spectroscopy to evaluate its stereoselectivity as a catalyst. Even though many salen ligands are known, their NMR data are not assigned completely. It was possible that modification in northern part of salen with 2‐hydroxyphenyl group afforded another oxygen chelation site in salen ligand. Here we report that synthesis and full NMR assignment of new salen ligands, which form meso 1,2‐bis(2‐hydroxyphenyl)ethylenediamine) and their cobalt (III) complexes. The assignments of ¹H and ¹³C NMR data obtained in this experiment can help us to predict the NMR data of other salen ligands. Copyright © 2008 John Wiley & Sons, Ltd.     

A combined experimental and theoretical approach for structural study on a new cinnamoyl derivative of 2-acetyl-1,3-indandione and its metal(II) complexes

The synthesis, structure and spectral properties of a new cinnamoyl derivative of 2-acetyl-1,3-indandione (2AID), p-fluoro-cinnamoyl-1,3-indandione, LH and its metal(II) complexes with Cu(II), Zn(II) and Cd(II), are described. In order to verify the molecular structure of the free ligand and its metal complexes, model geometries based on the spectroscopic data were optimized using quantum chemical methods. The experimental spectroscopic data (IR and NMR) of the ligand, LH, complemented by the calculated ones, show that it exists in the exocyclic enolic form in the gas phase, solution and solid state. Good quality single crystals of Cd(II) complex were obtained from a DMSO solution and were studied by means of single-crystal X-ray diffraction. The data show bidentate coordination of the ligand and two DMSO molecules coordinated to the metal centre, thus forming a complex with octahedral geometry. On the contrary, the spectroscopic data on the amorphous samples indicate a square planar geometry of the Cu(II) complex and distorted octahedral geometry for Zn(II) and Cd(II) complexes with two water molecules coordinated to the metal centre. The used quantum chemical method for structure optimization of the transition metal complexes, B3LYP/LANL2DZ, shows very good agreement with the crystallographic data and, therefore, was also employed for structural determination for the non-crystalline complexes. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

New Optical Sensors for Oxygen Based on Phosphorescent Cationic Water-Soluble Pd(II), Pt(II), and Rh(III) Porphyrins

A new material is proposed for optical sensors for molecular oxygen; the material is obtained by the introduction of Pd(II), Pt(II), and Rh(II) complexes of cationic water-soluble porphyrins into an MF-4SK ion-exchange polymer membrane. The phosphorescence of immobilized metal porphyrins is efficiently quenched by molecular oxygen both in the gas phase and in aqueous solutions. The Stern–Volmer relationships for phosphorescence quenching are linear over the entire range of oxygen concentrations. The new material exhibits good response times and high photochemical stability.     

Amperometric biosensor based on denatured DNA for the study of heavy metals complexing with DNA and their determination in biological, water and food samples

Amperometric biosensor (BS) has been elaborated based on the stationary mercury-film electrode (SMFE) with silver support and cellulose nitrate (CN) membrane containing immobilized single-stranded DNA (ssIDNA). The sorption isotherms and ssDNA-heavy metal binding constants have been obtained with the BS. According to these data, the chosen heavy metals form the following series of binding strength with ssIDNA: Pb(II)>Fe(III)>Cd(II). It has been found that upon the competitive adsorption, there exists practically simultaneous sorption of different ions at ssIDNA containing membrane. The method of the determination of heavy metals based on preconcentration of metal ions on the BS followed by the destruction of DNA-metal complexes with ethylenediamine tetraacetate (EDTA) and voltammogram recording has been proposed. The lower limits of detectable contents are 1.0x10(-10), 1.0x10(-9) and 1.0x10(-7) mol l(-1) for Pb(II), Cd(II) and Fe(III), respectively. Heavy metals have been assayed in natural and drinking water, milk and blood serum samples even under simultaneous presence with a selectivity factor of 1:10. The effect of matrix components has been estimated.     

Photosensitization study of cage-like metal complexes with hexadentate ligands, tptn and tpen. Part 1. Photochemistry and spectroelectrochemistry of iron(II), cobalt(III) and nickel(II) complexes

Two hexadentate ligands, N,N,N′,N′-tetrakis(2-pyridylmethyl)-1,3-propanediamine (tptn) and N,N,N′,N′-tetrakis(2-pyridylmethyl)ethylenediamine (tpen), were used to prepare cage-like metal complexes of Fe(II), Co(III) and Ni(II). As expected, these complexes are photochemically inert. The electrochemical behaviour of these complexes was studied by spectroelectrochemical methods. The iron(II) complexes exhibit chemical irreversibility on reduction and the nickel(II) complexes show reversible reduction behaviour. The potential of cobalt(III) complexes as photosensitizers is discussed.