Piezoelectric immunosensor based on magnetic nanoparticles with simple immobilization procedures

A novel method for immobilizing antibodies (antigens) based on magnetic nanoparticles has been proposed for piezoelectric immunoassay. The goat-anti-IgG antibody (IgGAb) as the model analyte was first covalently immobilized to magnetic nanoparticles, which were surface modified with amino-groups. The magnetic bio-nanoparticles (MBN-s) formed were attached to the surfaces of quartz crystal with the help of a permanent magnet. The detection of immunoglobulin G (IgG) was performed with the sensor prepared. The process of immobilization and immunoreaction was monitored by frequency recording. From the SEM images of the sensor surface before and after immobilization of MBN, one can see that the MBN was homogeneously adsorbed on sensor surface. The piezoelectric immunosensor can determine IgG in the range of 0.6-34.9 μg ml⁻¹ with a detection limit of 0.36 μg ml⁻¹. The MBN and immunocomplex layer can easily be removed simply by taking away the magnetic field, making the piezoelectric sensor easy to be regenerated.     

Synthesis and characterization of polyurethane microspheres and their application for immobilization of maltogenase

A series of polyurethane (PU) microspheres, based on 4,4′‐diphenylmethane diisocyanate and 1,4‐butanediol or a mixture of 1,4‐butanediol and polyether glycol (M = 1400) were synthesized by a one‐step method. The obtained PU microspheres were characterized by infrared spectroscopy, polarizing optical microscopy and dynamic thermogravimetry. Morphology studies of PU microspheres revealed that the material consists of spherical particles with relatively narrow particle size distribution in the range 1–100 µm and preferably between 10 to 50 µm; the obtained polymers were thermally stable up to 533–573 K. Maltogenase from Bacillus stearothermophilus was immobilized onto PU microspheres, synthesized using different ratios of components. High yield (about 100%) and efficiency (over 100%) of immobilization were obtained. Copyright © 2006 John Wiley & Sons, Ltd.     

硅基芯片表面化学性质对蛋白质固定化的影响

制备蛋白质芯片的关键在于将蛋白质固定到芯片表面并保持其生物学活性.本实验中,我们分别采用物理吸附、直接化学固定、加入间隔臂化学固定和生物亲和作用固定的方法将癌胚抗原(CEA)抗体固定到硅基芯片的二氧化硅表面.基于抗原-抗体的特异性相互作用,利用双抗体夹心酶联免疫法(ELISA)评价各种方法固定抗体的效果.实验结果表明,在修饰有氨基的表面采用戊二醛作为偶联试剂固定CEA抗体具有最高的偶联效率,引入多聚赖氨酸(poly-L-lysine)作为间隔臂可以显著增强固定效果,并可进一步降低非特异性吸附.而利用生物亲和作用固定CEA抗体也可获得较好的固定效果,但是非特异性吸附较严重.     

Comparative Assessment of Oriented Antibody Immobilization on Surface Plasmon Resonance Biosensing

Protein A and protein G are extremely useful molecules for the immobilization of antibodies. However, there are limited comparative reports available to evaluate their immobilization performance for use as biosensors. In this study, a comparative analysis was made of approaches that use protein A and protein G for avian leukosis virus detection. The antibody‐protein binding affinities were determined using surface plasmon resonance (SPR) analysis. The immobilization efficiency was obtained by calculating the number of the protein molecular binding sites. The positive influence of sensor response on antigen detection indicates that the amount of immobilized antibody plays a major role in the extent of immobilization. Moreover, the biosensors constructed using both proteins were found to be regenerative. The SPR results from this study suggest that the surfaces of protein G provide a better equilibrium constant and binding efficacy for immobilized antibodies, resulting in enhanced antigen detection.     

Development and characterization of methacrylate-based hydrazide monoliths for oriented immobilization of antibodies

Convective interaction media (CIM; BIA Separations) monoliths are attractive stationary phases for use in affinity chromatography because they enable fast affinity binding, which is a consequence of convectively enhanced mass transport. This work focuses on the development of novel CIM hydrazide (HZ) monoliths for the oriented immobilization of antibodies. Adipic acid dihydrazide (AADH) was covalently bound to CIM epoxy monoliths to gain hydrazide groups on the monolith surface. Two different antibodies were afterwards immobilized to hydrazide functionalized monolithic columns and prepared columns were tested for their selectivity. One column was further tested for the dynamic binding capacity.     

Micropatterning of proteins on the surface of three-dimensional poly(ethylene glycol) hydrogel microstructures

This paper describes micropatterning of proteins on the surface of three-dimensional hydrogel microstructures. Poly(ethylene glycol) (PEG)-based hydrogel microstructures were fabricated on a glass substrate using a poly(dimethylsiloxane) (PDMS) replica as a molding insert and photolithography. The lateral dimension and height of the hydrogel microstructures were easily controlled by the feature size of the photomask and depth of the PDMS replica, respectively. Bovine serum albumin (BSA), a model protein, was covalently immobilized to the surface of the hydrogel microstructure via a 5-azidonitrobenzoyloxy N-hydroxysuccinimide bifunctional linker at a surface density of 1.48 mg cm⁻². The immobilization of BSA on the PEG hydrogel surface was demonstrated with XPS by confirming the formation of a new nitrogen peak, and the selective immobilization of fluorescent-labeled BSA on the outer region of the three-dimensional hydrogel micropattern was demonstrated by fluorescence. A hydrogel microstructure could immobilize two different enzymes separately, and sequential bienzymatic reaction was demonstrated by reacting glucose and Amplex Red with a hydrogel microstructure where glucose oxidase was immobilized on the surface and peroxidase was encapsulated. Activity of immobilized glucose oxidase was 16.5 U mg⁻¹, and different glucose concentration ranged from 0.1 to 20 mM could be successfully detected.     

化学生物学中光敏分子微阵列的表面构建与应用

分子微阵列是有机合成（特别是组合化学合成）方法应用于生物和医学研究而发展起来的高科技集成技术,通过把微电子、微加工技术和有机化学合成反应相结合,在固体基质（如硅片、玻片、瓷片等）表面构建微型的生物有机化学分子系统,以实现对细胞、蛋白质、核酸及其他生物组分进行快速、敏感、高效地处理．近年来,随着表面化学构建策略研究的不断深入和迅猛发展,分子微阵列技术的应用领域不断拓展,已从最初用于核酸分子的杂交测序延伸到基因组功能研究的各个方面．本文着重综述了光敏分子微阵列的表面化学构建策略研究及其在化学生物学分析中应用的最新进展,并展望了其发展的未来趋势．内容主要包括：小分子与多肽分子微阵列、蛋白质分子微阵列、核酸分子微阵列和糖分子微阵列等．     

A new method for reversible immobilization of thiol biomolecules based on solid-phase bound thiolsulfonate groups

A new method for the reversible immobilization of thiol bimolecules, e.g., thiolpeptides and thiolproteins, to beaded agarose and other solid phases is reported. The method consists of an activation and a coupling step. The activation is based on oxidation of disulfides (or thiol groups via disulfides) present in a solid phase by hydrogen peroxide at moderately acidic pH. This oxidation leads to disulfide oxides (thiolsulfinate groups of which the majority are further oxidized to thiolsulfonate). The thiolsulfonate groups react easily with thiol compounds, which become immobilized via disulfide bonds. The pH range for thiol coupling is wide (pH 5-8), but for most thiols the reaction seems to proceed faster at pH>7. The stability of the reactive group to hydrolysis, especially at neutral and weakly acidic pH, is very high. The activated gel, therefore, can be stored as a suspension at pH 5 for extended periods. The method has been used to reversibly immobilize glutathione, β-galactosidase, alcohol dehydrogenase, urease, and papain, all with exposed thiol groups as well as thiolated bovine serum albumin and sweet-potato β-amylase. Depending on the thiol content of starting thiol-agarose, thiol-sulfonate-agarose derivatives with different binding capacities can be obtained. Thus, up to 5.0 mg (16 μmol) glutathione and 15 mg thiol-protein/mL gel derivative have been immobilized.     

Covalent immobilization of antibody fragments on well-defined polymer brushes via site-directed method

Well-defined polymer brushes and block copolymer brushes consisting of 2-methacryloyloxyethyl phosphorylcholine (MPC) and glycidyl methacrylate (GMA) were prepared by surface-initiated atom transfer radical polymerization (ATRP). The polymer brushes were used for the immobilization of antibody fragments in a defined orientation. Pyridyl disulfide moieties were introduced to the polymer brushes via a reaction of epoxy groups in GMA units. Fab’ fragments were then immobilized onto these surfaces via a thiol-disulfide interchange reaction and the reactivity of antibodies with antigens was investigated. Antigen/antibody binding on the polymer brushes was more preferable than that on epoxysilane films as a control surface. Furthermore, the activity of the antibodies immobilized on the block copolymer brushes having biocompatible PMPC was greater than that on other surfaces that did not have PMPC in their structures.     

NHS-ester functionalized poly(PEGMA) brushes on silicon surface for covalent protein immobilization

Poly(PEGMA) homopolymer brushes were developed by atom transfer radical polymerization (ATRP) on the initiator-modified silicon surface (Si-initiator). Through covalent binding, protein immobilization on the poly(PEGMA) films was enabled by further NHS-ester functionalization of the poly(PEGMA) chain ends. The formation of polymer brushes was confirmed by assessing the surface composition (XPS) and morphology (atomic force microscopy (AFM), scanning electronic microscopy (SEM)) of the modified silicon wafer. The binding performance of the NHS-ester functionalized surfaces with two proteins horseradish peroxidase (HRP) and chicken immunoglobulin (IgG) was monitored by direct observation. These results suggest that this method which incorporates the properties of polymer brush onto the binding surfaces may be a good strategy suitable for covalent protein immobilization.     

Voltammetric oxidation and determination of cinnarizine at glassy carbon electrode modified with multi-walled carbon nanotubes

We discovered a novel method to prepare a protein-based hydrogel, that is, a “Three-Dimensional Nanostructured Protein Hydrogel (3D NPH)”, which is composed of protein–polymer hybrid nanoparticles. In this study, we propose a novel protein microarray whose 3D NPH spots were prepared by dispensing a small volume of the solution of protein–polymer mixture on a substrate. The dispensed solution had a short time for cross-linking before its drying-up and the resulting 3D NPH had loosely cross-linked, thin spongy structure. Therefore, the reaction ratio between ligands and analytes was drastically improved in this system compared with the large volume system for Surface Plasmon Resonance (SPR) protein microarray.     

A microarray chip for label-free detection of narcotics

A protein array chip for label-free optical detection of low molecular weight compounds has been developed. As a proof of principle, the chip is proven capable of rapidly (approximately 1 min) determining hits from aqueous cocktails composed of four common narcotics, cocaine, ecstasy, heroin, and amphetamine, using imaging surface plasmon resonance (SPR) as the detection principle. The chip is produced by injecting a mixture of antibodies and letting them self-sort and bind to narcotic analog coupled proteins already present in a predefined pattern on the supporting substrate. An indirect detection method, where antibodies are displaced from the surface upon recognition of their corresponding narcotics, is used to obtain the optical contrast and thus a detectable SPR and/or ellipsometric signal. Two types of readouts are possible from the present setup: intensity SPR images and SPR/ellipsometric sensorgrams. Positive hits were routinely obtained for analyte concentrations of 50 pg/μL and the limit of detection, without any parameter optimizations, seems to fall in the range 0.5 pg/μL (1.4 nM) for heroin, 2.5 pg/μL (8.2 nM) for cocaine, and 5 pg/μL for the other two narcotics (26 nM for ecstasy and 37 nM for amphetamine). With improved readout possibilities (sampling frequency), signal evaluation algorithms, and antibody–antigen design strategies, we believe this limit can be further improved. The chip is shown to work for many measurement cycles with excellent reproducibility. Moreover, with a more advanced fluidic system, excess injected antibodies could be collected and reused for many cycles, which could make the running costs of the system very low. The chip is in no way limited to detection of narcotics. Other low molecular weight compounds could easily be detected on the same chip. For example, trinitrotoluene detection has already been demonstrated using our chip. Possible areas of application for the system are therefore envisaged in airport and underground transport security, customs, drug interdiction, forensics, and as warning alerts on military equipment and personnel. Figure Narcotics chip (left) composed of spots of piezodispensed analog-coupled proteins that are loaded with antibodies to form a patterned regions represented by the capital letter of the four different narcotics in focus. (Right) The same chip showing hits for ectasy and herion in the cocktail. Both images are obtained in imaging surface plasmon resonance mode     

Development of a capillary gel electrophoresis method for monitoring disulfide isomer heterogeneity in IgG2 antibodies

A CGE method for monitoring the disulfide isomer distribution characteristic of IgG2 MAbs is presented. Disulfide heterogeneity of MAbs has been studied using various chromatographic and electrophoretic methods. Although CGE operates using a different selectivity mechanism from that of sorption chromatographic techniques, similar trends are present in the data, which allow the CGE method to be used as a complementary method for studying disulfide isomer distribution. This article focuses on the optimization of a capillary‐based gel electrophoresis method that can be used to support antibody development including bioprocess optimization, antibody characterization, release, and formulation stability assessment.     

A Novel Model for Protein Immobilization on Microspheres

The immobilization of proteins, especially receptor proteins commonly used in high through-put screening of drugs (HTS), have received great attention in recent years. There are many successful isothermal models for describing the adsorption of protein onto solid surface, such as Langmuir model, Bi-Langmuir model, Fowler model, Freundlich model, Freundlich-Langmuir model and Tekmin model etc. In all these models, Langmuir model was the most favorable one model accepted by many researchers, but the experimental results showed that it was not entirely fit to all adsorption behaviors. So new models were required for describing protein adsorption onto microspheres in different conditions.In our research, a novel isothermal model, including Langmuir and other adsorbing behaviors was presented basing on the holding degree of surface active sites and the interaction styles of protein immobilization. In Langmuir model, the adsorbing amount of protein was described as [PS] =Km[P]/1 + K[P], where [PS] was the concentration of adsorbed protein, [P] was the concentration of freeprotein at equilibrium state, and Km and K was constant. According to the interactions of protein and ligands, there were three patterns in the interactions of protein and ligands. On the similar assumption that the interaction of protein and microspheres were three styles, and based on the definition of the holding degree of surface active sites (Y), three adsorption behaviors could be described as Y K[ P ]φ/ K[P]φ+1 or ln K + φ ln[P] =ln(Y/1-Y) in which [P] was the concentration of free protein at equilibrium state, and φ and K was constant. Different scale of φ presented different adsorption behaviors, especially when φ was 1, the adsorption behavior was Langmuir adsorbing model. Figure I indicated the different adsorbing results in different adsorption behaviors (φ＞1, φ＜1,and φ=1).     

A study on phase morphology and surface properties of polyurethane/organoclay nanocomposite

In this study, polyurethane/organically modified layered silicate (organoclay) nanocomposites were prepared through in situ polymerization in the presence of organoclay. Phase morphology of the polyurethane/organoclay nanocomposite was investigated by small-angle X-ray scattering (SAXS) and atomic force microscopy (AFM). The results suggest that the inter-domain repeat distance decreased with the introduction of organoclay. The organoclay has a more significant effect on the inter-domain repeat distance at a low hard segment content. Also with the increase of the hard segment, the inter-domain repeat distance and domain size increased markedly. The size of hard domain of the polyurethane was found to be in the range of 12-32 nm in this case, and it keeps nearly unchanged with the clay content. It is suggested by AFM phase imaging technique that the hard domain can self-organize further to form spherical aggregates. The introduction of clay into the polyurethane matrix resulted in the decrease in the size of the spherical aggregates from ∼800 nm to ∼500 nm, indicating clay has an important effect on the aggregation behavior of hard domains. The effect of clay on the surface energy was examined by means of AFM and goniometry techniques. The results obtained by two methods are consistent, i.e., with the increase of clay content, the surface energy decreased due to the effect of organic modifier.     

Ultrasonic frequency analysis of antibody-linked hydrogel biosensors for rapid point of care testing

Analyte quantification in highly scattering media such as tissue, blood, and other biological fluids is challenging using conventional spectroscopic methods. Ultrasound easily penetrates these opaque samples, yet currently provides little chemical information. We have developed a general approach for creating hydrogel biosensors based on antibody-linked cellulose polymers. Target recognition induces changes to the sensor stiffness and size, which is accompanied by characteristic changes to a measured ultrasonic frequency profile. Using this technique, nM sensitivity for acetaminophen is demonstrated in a series of biofluids including whole blood, blood plasma, saliva, and urine. Likewise, this methodology is attractive for point of care diagnostics due to the short measurement time, simple methodology which excludes pretreatment of samples, and has minimal chemical or buffer requirements.     

Development of pH sensor based on aromatic polyurethane matrix

The synthesized aromatic polyurethane (APU)-based all-solid-state (ASS) pH sensor was developed with the same APU-based reference site in an ASS multi sensing electrode. The best analytical performance (the linear range of pH 3.0–11.5, slopes of 57 mV pH⁻¹) was obtained with the membrane composition of 33:66:1 (wt.%) of APU/plasticizer (NPOE)/ionophore (N,N-dioctadecylmethylamine) with the addition of lipophilic additive (KTpClPB, 5 mol.%). This ASSE exhibits more advantages of increasing stability, reducing membrane resistance and reducing anion interference.     

Study on thermal properties of polyurethane nanocomposites based on organo-sepiolite

The effects of sepiolite modified with γ-aminopropyltriethoxylsilane (KH550-Sp) on thermal properties of polyurethane (PU) nanocomposites were investigated by differential scanning calorimetry (DSC), thermogravimetric analysis (TG), attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), and tensile test. The DSC results showed that the glass transition temperature of hard segments in PU/KH550-Sp nanocomposite increased with the increase of KH550-Sp, because sepiolite restricted the formation of hydrogen bonding within hard segments of polyurethane. TG results revealed that the thermal stability of PU was improved by KH550-Sp, and the onset decomposition temperature for PU nanocomposites with a KH550-Sp content of 3 wt% was about 20 °C higher than that for pure PU. The tensile properties of pure PU and nanocomposites before and after ageing 120 °C for 72 h were determined, and it was observed that the percentage loss in tensile strength decreased with the addition of KH550-Sp because of an oxidation barrier of KH550-Sp confirmed by ATR-FTIR.