Recent advances in microfluidic cell sorting techniques based on both physical and biochemical principles

Microfluidic technologies for isolating cells of interest from a heterogeneous sample have attracted great attentions, due to the advantages of less sample consumption, simple operating procedure, and high separation accuracy. According to the working principles, the microfluidic cell sorting techniques can be categorized into biochemical (labeled) and physical (label‐free) methods. However, the inherent drawbacks of each type of method may somehow influence the popularization of these cell sorting techniques. Using the multiple complementary isolation principles is a promising strategy to overcome this problem, therefore there appears to be a continuing trend to integrate two or more sorting methods together. In this review, we focus on the recent advances in microfluidic cell sorting techniques relied on both physical and biochemical principles, with emphasis on the mechanisms of cell separation. The biochemical cell sorting techniques enhanced by physical principles and the physical cell sorting techniques enhanced by biochemical principles, are first introduced. Then, we highlight on‐chip magnetic‐activated cell sorting, on‐chip fluorescence‐activated cell sorting, multi‐step cell sorting and multi‐principle cell sorting techniques, which are based on both physical and biochemical separation mechanisms. Finally, the challenges and future perspectives of the integrated microfluidics for cell sorting are discussed.     

Label-free cell separation and sorting in microfluidic systems

Cell separation and sorting are essential steps in cell biology research and in many diagnostic and therapeutic methods. Recently, there has been interest in methods which avoid the use of biochemical labels; numerous intrinsic biomarkers have been explored to identify cells including size, electrical polarizability, and hydrodynamic properties. This review highlights microfluidic techniques used for label-free discrimination and fractionation of cell populations. Microfluidic systems have been adopted to precisely handle single cells and interface with other tools for biochemical analysis. We analyzed many of these techniques, detailing their mode of separation, while concentrating on recent developments and evaluating their prospects for application. Furthermore, this was done from a perspective where inertial effects are considered important and general performance metrics were proposed which would ease comparison of reported technologies. Lastly, we assess the current state of these technologies and suggest directions which may make them more accessible.     

Cell-imprinted polydimethylsiloxane for the selective cell adhesion

A cell-patterned substrate with aptamer functionalization was prepared, which holds promise in selective cell isolation fields such as the isolation of the circulating tumor cells.     

Microfluidics technology for manipulation and analysis of biological cells

Analysis of the profiles and dynamics of molecular components and sub-cellular structures in living cells using microfluidic devices has become a major branch of bioanalytical chemistry during the past decades. Microfluidic systems have shown unique advantages in performing analytical functions such as controlled transportation, immobilization, and manipulation of biological molecules and cells, as well as separation, mixing, and dilution of chemical reagents, which enables the analysis of intracellular parameters and detection of cell metabolites, even on a single-cell level. This article provides an in-depth review on the applications of microfluidic devices for cell-based assays in recent years (2002–2005). Various cell manipulation methods for microfluidic applications, based on magnetic, optical, mechanical, and electrical principles, are described with selected examples of microfluidic devices for cell-based analysis. Microfluidic devices for cell treatment, including cell lysis, cell culture, and cell electroporation, are surveyed and their unique features are introduced. Special attention is devoted to a number of microfluidic devices for cell-based assays, including micro cytometer, microfluidic chemical cytometry, biochemical sensing chip, and whole cell sensing chip.     

Tailoring the trajectory of cell rolling with cytotactic surfaces

Cell separation technology is a key tool for biological studies and medical diagnostics that relies primarily on chemical labeling to identify particular phenotypes. An emergent method of sorting cells based on differential rolling on chemically patterned substrates holds potential benefits over existing technologies, but the underlying mechanisms being exploited are not well characterized. In order to better understand cell rolling on complex surfaces, a microfluidic device with chemically patterned stripes of the cell adhesion molecule P-selectin was designed. The behavior of HL-60 cells rolling under flow was analyzed using a high-resolution visual tracking system. This behavior was then correlated to a number of established predictive models. The combination of computational modeling and widely available fabrication techniques described herein represents a crucial step toward the successful development of continuous, label-free methods of cell separation based on rolling adhesion.     

Analysis and applications of nanoparticles in the separation sciences: A case of gold nanoparticles

Nanometer-sized gold particles—gold nanoparticles (Au NPs)—are attracting a great deal of attention for their use in various technologies, including catalysis, optical and electronic devices, and separation science. In the emerging field of nanomaterials, the design, synthesis, and characterization of nanostructures are critical features because the manipulation of these structures has a direct effect on their resulting macroscopic properties. Nanostructures fabricated in layers on surfaces—for example, through self-assembly processes—have several potential applications in separation science. This review provides an introduction to the characterizations of Au NPs using size exclusion chromatography, high performance liquid chromatography (HPLC), and electrophoresis, and their self-assembly onto solid supports for analyses based on HPLC, gas chromatography, and capillary electrophoresis. In addition, sample concentration strategies involving the use of self-assembly approaches for surface modification of Au NPs are also discussed.     

Activity ranking of synthetic analogs targeting vascular endothelial growth factor receptor 2 by an integrated cell membrane chromatography system

Evaluating the biological activities of small molecules represents an important part of the drug discovery process. Cell membrane chromatography (CMC) is a well‐developed biological chromatographic technique. In this study, we have developed combined SMMC‐7721/CMC and HepG2/CMC with high‐performance liquid chromatography and time‐of‐flight mass spectrometry to establish an integrated screening platform. These systems was subsequently validated and used for evaluating the activity of quinazoline compounds, which were designed and synthesized to target vascular endothelial growth factor receptor 2. The inhibitory activities of these compounds towards this receptor were also tested using a classical caliper mobility shift assay. The results revealed a significant correlation between these two methods (R² = 0.9565 or 0.9420) for evaluating the activities of these compounds. Compared with traditional methods of evaluating the activities analogous compounds, this integrated cell membrane chromatography screening system took less time and was more cost effective, indicating that it could be used as a practical method in drug discovery.     

Label-free Sorting and Counting of Yeast Cells for Viability Studies

This paper reports the new combination of cell sorting and counting capabilities on a single device. Most state-of-the-art devices combining these technologies use optical techniques requiring complicate experimental setups and labeled samples. The use of a label-free, electrical device significantly decreases the system complexity and makes it more appropriate for use in point-of-care diagnostics.Living and dead yeast cells are separated by dielectrophoretic forces and counted using coulter counters. The combination of these two methods allows the determination of the percentage of living and dead cells for viability studies of cell samples. It could further be used for sorting and counting of blood cells in applications such as diagnosis of insufficient cell concentrations, identification of cell deficiencies or bacterial contamination. The use of dielectrophoresis (DEP) as sorting principle allows to separate cells based on their dielectric properties in place of size-based separation, enabling sorting of large panels of cells and separation of infected and non-infected cells of the same type.     

Cell electrophoresis on a chip: what can we know from the changes in electrophoretic mobility?

An overview of both experimental and theoretical studies of cell electrophoresis mobility (EPM) over the past fifty years and the relevance of cell EPM measurement are presented and discussed from the viewpoint of exploring the potential use of cell EPM as an index of the biological condition of cells. Physical measurements of the optical and/or electrical properties of cells have been attracting considerable attention as noninvasive cell-evaluation methods that are essential for the future of cell-based application technologies such as cell-based drug screening and cell therapy. Cell EPM, which can be measured in a noninvasive manner by cell electrophoresis, reflects the electrical and mechanical properties of the cell surface. Although the importance of cell EPM has been underestimated for a long time, mostly owing to the technical difficulties associated with its measurement, recent improvements in measurement technology using microcapillary chips have been changing the situation: cell EPM measurement has become more reliable and faster. Recent studies using the automated microcapillary cell electrophoresis system have revealed the close correlation between cell EPM and important biological phenomena including cell cycle, apoptosis, enzymatic treatment, and immune reaction. In particular, the converged EPM distribution observed for synchronized cells has altered the conventional belief that cell EPMs vary considerably. Finding a new significance of cell EPM is likely to lead to noninvasive cell evaluation methods essential for the next-generation of cell engineering.     

凝胶渗透色谱柱填料研究现状

凝胶渗透色谱法(GPC)是19世纪60年代开发的一种分离技术,作为一种液相分离色谱,其具有对流动相的要求不高、实验条件温和、重现性好、分析速度快、溶质回收率高等优点.这些优点使凝胶渗透色谱具有独特的分离效果,因此得到迅速发展并广泛用于石油化工、生物医药、食品卫生、环境监控等领域.该文对凝胶渗透色谱柱填料(如聚丙烯酰胺凝...     

Continuous sorting of magnetic cells via on-chip free-flow magnetophoresis

The ability to separate living cells is an essential aspect of cell research. Magnetic cell separation methods are among some of the most efficient methods for bulk cell separation. With the development of microfluidic platforms within the biotechnology sector, the design of miniaturised magnetic cell sorters is desirable. Here, we report the continuous sorting of cells loaded with magnetic nanoparticles in a microfluidic magnetic separation device. Cells were passed through a microfluidic chamber and were deflected from the direction of flow by means of a magnetic field. Two types of cells were studied, mouse macrophages and human ovarian cancer cells (HeLa cells). The deflection was dependent on the magnetic moment and size of the cells as well as on the applied flow rate. The experimentally observed deflection matched well with calculations. Furthermore, the separation of magnetic and non-magnetic cells was demonstrated using the same microfluidic device.     

Graphene Oxide Nanosheets Modified with Single‐Domain Antibodies for Rapid and Efficient Capture of Cells

Peripheral blood can provide valuable information on an individual’s immune status. Cell‐based assays typically target leukocytes and their products. Characterization of leukocytes from whole blood requires their separation from the far more numerous red blood cells. 1 Current methods to classify leukocytes, such as recovery on antibody‐coated beads or fluorescence‐activated cell sorting require long sample preparation times and relatively large sample volumes. 2 A simple method that enables the characterization of cells from a small peripheral whole blood sample could overcome limitations of current analytical techniques. We describe the development of a simple graphene oxide surface coated with single‐domain antibody fragments. This format allows quick and efficient capture of distinct WBC subpopulations from small samples (～30 μL) of whole blood in a geometry that does not require any specialized equipment such as cell sorters or microfluidic devices.     

Recent Progress and Perspectives on Cell Surface Modification

The cell membrane is a biological interface consisting of phospholipid bilayer, saccharides and proteins that maintains a stable metabolic intracellular environment as well as regulating and controlling the exchange of substances inside and outside the cell. Cell membranes provide a highly complex biological surface carrying a variety of essential surfaces ligands and receptors for cells to receive various stimuli of external signals, thereby inducing corresponding cell responses regulating the life activities of the cell. These surface receptors can be manipulated via cell surface modification to regulate cellular functions and behaviors Thus, cell surface modification has attracted considerable attention due to its significance in cell fate control, cell engineering and cell therapy. In this minireview, we describe the recent developments and advances of cell surface modification, and summarize the main modification methods with corresponding functions and applications. Finally, the prospect for the future development of the modification of the living cell membrane is discussed.     

A low-cost and high-throughput benchtop cell sorter for isolating white blood cells from whole blood

The ability to isolate and purify white blood cells (WBCs) from mixed ensembles such as blood would benefit autologous cell-based therapeutics as well as diagnosis of WBC disorders. Current WBCs isolation methods have the limitations of low purity or requiring complex and expensive equipment. In addition, due to the overlap in size distribution between lymphocytes (i.e., a sub-population of WBCs) and red blood cells (RBCs), it is challenging to achieve isolation of entire WBCs populations. In this work, we developed an inertial microfluidics-based cell sorter, which enables size-based, high-throughput isolation, and enrichment of WBCs from RBC-lysed whole blood. Using the developed inertial microfluidic chip, the sorting resolution is sharpened within 2 μm, which achieved separation between 3 and 5 μm diameter particles. Thus, with the present cell sorter, a full population of WBCs can be isolated from RBC-lysed blood samples with recovery ratio of 92%, and merely 5% difference in the composition percentage of the three subpopulations of granulocytes, monocytes, and lymphocytes compared to the original sample. Furthermore, our cell sorter is designed to enable broad application of size-based inertial cell sorting by supplying a series of microchips with different sorting cutoff size. This strategy allows us to further enrich the lymphocytes population by twofold using another microchip with a cutoff size between 10 and 15 μm. With simplicity and efficiency, our cell sorter provides a powerful platform for isolating and sorting of WBCs and also envisions broad potential sorting applications for other cell types.     

亲和分离在蛋白质泛素化修饰研究中的应用进展

蛋白质泛素化是真核生物最普遍、最复杂的翻译后修饰方式之一,在细胞的信号转导、生长、发育、代谢等生命过程中发挥着重要作用。泛素化过程的失调则与神经退行性疾病、炎症反应、癌症等重大疾病的发生发展密切相关。分析和研究蛋白质泛素化的结构与功能,可望为认识生命、探索疾病调控内在规律和发现新的诊断策略提供重要信息。生命体系的高度复杂性,泛素化修饰位点、结构类型的多变和多样性,时空动态变化等特点给蛋白质泛素化分析研究带来了巨大的挑战。亲和分离以其高选择性成为泛素化蛋白质结构与功能研究的有力工具。免疫亲和分离法基于抗原-抗体相互作用,是最为经典的分离分析方法,已广泛应用于泛素化蛋白质或肽段的富集分离。源于天然泛素受体的泛素结合结构域(ubiquitin binding domains, UBDs)可与泛素或多聚泛素链相互作用。UBDs和基于此发展起来的串联泛素结合实体(tandem ubiquitin-binding entities, TUBEs)已成为蛋白质泛素化功能研究的热门识别分子。各种多肽类化合物的发展也为蛋白质泛素化的结构和功能解析提供新工具。此外,多种亲和识别配基的联合使用,在蛋白质泛素化修饰的高特异性、高灵敏度分析中展现了独特的优势,为认识生命体内的泛素化修饰提供了重要保障。该文对亲和分离方法在蛋白质泛素化修饰分析中的应用及进展进行了综述。     

A flow-through microfluidic chip for continuous dielectrophoretic separation of viable and non-viable human T-cells

Effective methods for rapid sorting of cells according to their viability are critical in T cells based therapies to prevent any risk to patients. In this context, we present a novel microfluidic device that continuously separates viable and non-viable T-cells according to their dielectric properties. A dielectrophoresis (DEP) force is generated by an array of castellated microelectrodes embedded into a microfluidic channel with a single inlet and two outlets; cells subjected to positive DEP forces are drawn toward the electrodes array and leave from the top outlet, those subjected to negative DEP forces are repelled away from the electrodes and leave from the bottom outlet. Computational fluid dynamics is used to predict the device separation efficacy, according to the applied alternative current (AC) frequency, at which the cells move from/to a negative/positive DEP region and the ionic strength of the suspension medium. The model is used to support the design of the operational conditions, confirming a separation efficiency, in terms of purity, of 96% under an applied AC frequency of 1.5 × 10⁶ Hz and a flow rate of 20 μl/h. This work represents the first example of effective continuous sorting of viable and non-viable human T-cells in a single-inlet microfluidic chip, paving the way for lab-on-a-chip applications at the point of need.     

磁性微球的制备及在细胞分离中的应用

总结评述了近年来磁性微球制备的研究工作,阐述了磁性微球用于细胞分离的基本原理和方法,指出了当前需要解决的问题。     

Bulk and surface modifications of polylactide

This article reviews various methods of modifying the bulk and surface properties of poly(lactic acid) (PLA) so that the polymer may be used as a drug carrier in a drug delivery system (DDS) and as a cell scaffold in tissue engineering. Copolymerization of lactide with other lactone-type monomers or monomers with functional groups such as malic acid, copolymerization of lactide with macromolecular monomer such as poly(ethylene glycol) (PEG) or dextran, as well as blending polylactide and natural derivatives and other methods of bulk modification are discussed. Surface modifications of PLA-type copolymers, such as surface coating, chemical modification, and plasma treatment are described. Cell culture technology proves the efficiency of bulk and surface modification and the potential application of PLA in tissue engineering.     

An overview on enrichment methods for cell surface proteome profiling

Cell surface proteins are essential for many important biological processes, including cell–cell interactions, signal transduction, and molecular transportation. With the characteristics of low abundance, high hydrophobicity, and high heterogeneity, it is difficult to get a comprehensive view of cell surface proteome by direct analysis. Thus, it is important to selectively enrich the cell surface proteins before liquid chromatography with mass spectrometry analysis. In recent years, a variety of enrichment methods have been developed. Based on the separation mechanism, these methods could be mainly classified into three types. The first type is based on their difference in the physicochemical property, such as size, density, charge, and hydrophobicity. The second one is based on the bimolecular affinity interaction with lectin or antibody. And the third type is based on the chemical covalent coupling to free side groups of surface‐exposed proteins or carbohydrate chains, such as primary amines, carboxyl groups, glycan side chains. In addition, metabolic labeling and enzymatic reaction‐based methods have also been employed to selectively isolate cell surface proteins. In this review, we will provide a comprehensive overview of the enrichment methods for cell surface proteome profiling.     

Microfluidic methods for cell separation and subsequent analysis

Cell is the most basic unit of the morphological structure and life activity of an organism. Learning the composition, structure and function of cells, exploring the life activities of cells and studying the interaction between cells are of great significance for human cognition and control of the life activities of organisms. Therefore, rapid, convenient, inexpensive, high-precision and reliable methods of cell separation and analysis are being developed to obtain accurate information for the s...