Impedimetric sensing of uranyl ion based on phosphate functionalized cysteamine self-assembled monolayers

A phosphate functionalized cysteamine self-assembled monolayer based on gold electrode is designed for uranyl ion (UO₂²⁺) detection. The response of the modified electrode is studied by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry. The EIS data are approximated using constant phase element (CPE) model from which kinetic and analytical parameters are evaluated. Uranyl ion is recognized based on blocking effect against charge transfer between p-benzoquinone as a probe and the modified electrode. This effect is detected from linear variation of charge transfer resistance (R_ct) as a function of UO₂²⁺ concentration. From the analysis of the EIS data and approximated parameters, a method is developed for UO₂²⁺ determination based on impedimetric measurements.     

Sensitive determination of iron(III) by gold electrode modified with 2-mercaptosuccinic acid self-assembled monolayer

Preparation and application of gold 2-mercaptosuccinic acid self-assembled monolayer (Au-MSA SAM) electrode for determination of iron(III) in the presence of iron(II) is described by cyclic voltammetry, electrochemical impedance spectroscopy, and Osteryoung square wave voltammetry. The square wave voltammograms showed a sharp peak around positive potentials +0.250 V that was used for construction of the calibration curve. Parameters influencing the method were optimized. A linear range calibration curve from 1.0 × 10⁻¹⁰ to 6.0 × 10⁻⁹ M iron(III) with a detection limit of 3.0 × 10⁻¹¹ M and relative standard deviation (R.S.D.) of 6.5% for n = 8 at 1.0 × 10⁻⁹ M iron(III) was observed in the best conditions. Possible interferences from the coexisting ions were also investigated. The results demonstrated that sensor could be used for determination of iron(III) in the presence of various ions. The validity of the method and applicability of the sensor were successfully tested by determining of iron(III) in natural waters (tap and mineral waters) and in a pharmaceutical sample (Venofer^® ampoule) without interference from sample matrix. The experimental data are presented and discussed from which the new sensor is characterized.     

2，3-二巯基乙二酸自组装膜修饰电极测定对苯二酚

研究了DMSA自组装膜的组装过程及电化学行为.DMSA自组装膜对于对苯二酚的氧化还原能够起到明显的电催化作用.在pH 6.4的H3PO4缓冲溶液中,氧化、还原峰电流与对苯二酚的浓度在6.0×105～1.0×10-3 mol/L范围内呈良好的线性关系,检出限达8.0×10-7mol/L.该电极可用于模拟废水样的测定.     

Sensitive detection of clozapine using a gold electrode modified with 16-mercaptohexadecanoic acid self-assembled monolayer

Clozapine, an effective antipsychotic drug, was found generating a pair of redox peaks at about 0.33-0.4 V (versus SCE) at 16-mercaptohexadecanoic acid (i.e. MHA) self-assembled monolayer (SAM) modified gold electrode (i.e. MHA/Au) in 0.05 mol L⁻¹ Tris-HCl (pH 8.1) buffer solution. Sensitive and quantitative measurement of clozapine based on anodic peak was established under optimum conditions. The anodic peak current was linear to clozapine concentration in the range from 1 × 10⁻⁶ to 5 × 10⁻⁵ mol L⁻¹ with the detection limit of 7 × 10⁻⁹ mol L⁻¹. This method was successfully applied to the detection of clozapine in drug tablets and proved to be reliable compared with ultraviolet spectrophotometry (UV). The MHA SAM was characterized by Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), contact angle goniometry, electrochemical impedance spectroscopy (EIS) and electrochemical probe.     

Application of 2-mercaptobenzothiazole self-assembled monolayer on polycrystalline gold electrode as a nanosensor for determination of Ag(I)

Fabrication and application of a voltammetric sensor based on gold 2-mercaptobenzothiazole self-assembled monolayer (Au-MBT SAM) for determination of silver ion is described. Preliminary experiments were performed to characterize the monolayer. The surface pK_a determined for the MBT monolayer is 7.0. This value was obtained by impedimetric titration of the monolayer in the presence of Fe(CN)₆^3−/4− as a redox probe. The extent of surface coverage was evaluated as 1.52 × 10⁻⁹ mol cm⁻² based on charged consumed for reductive desorption of the monolayer in the 0.50 M NaOH solution. Then the sensor was used for determination of Ag(I) by square wave voltammetry. The parameters affecting the sensor response, such as pH and supporting electrolyte, were optimized. A dynamic calibration curve with two linear parts was obtained in the concentration ranges of 5 × 10⁻⁸-8 × 10⁻⁷ and 1 × 10⁻⁶-1 × 10⁻⁵ M of Ag(I). The detection limit adopted from cathodic striping square wave voltammetry was as 1 × 10⁻⁸ M for n = 7. Furthermore, the effect of potential interfering ions on the determination of Ag(I) was studied, and an appropriate method was used for the elimination of this effect.     

Direct electrochemistry of cytochrome c immobilized on a novel macroporous gold film coated with a self-assembled 11-mercaptoundecanoic acid monolayer

We have successfully constructed a novel gold film with open interconnected macroporous walls of nanoparticles by combining the hydrogen bubble dynamic template synthesis with galvanic replacement reaction. After modified by a self-assembled monolayer (SAM) of 11-mercaptoundecanoic acid (MUA), the three-dimensionally (3D) interconnected macroporous Au film has been used as a biocompatible substrate for the immobilization of cytochrome c. The morphology, structure and electrochemical features of the modified and unmodified macroporous Au films were characterized by field-emission scanning electron microscopy (FESEM), energy-dispersive X-ray (EDX), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The results reveal that the resultant films had a large electroactive surface area for high protein loading, enhanced electron transfer of cytochrome c, retained electrochemical activity, good stability and repeatability. And the excellent electrochemical behaviors could be attributed to the hierarchical structure of the macroporous Au film constructed by nanoparticles.     

Label-free detection of DNA molecules on the dendron based self-assembled monolayer by electrochemical impedance spectroscopy

We report preparation of a novel platform for effective DNA hybridization and its application to the detection of single mismatched DNA. Cone-shaped dendrimer molecules have been immobilized on the gold surface at equidistance, 3.1 nm, from each other with a probe DNA molecule attached to the top of each dendrimer so that enough space would be secured for effective hybridization. This arrangement allows each probe DNA molecule to form a natural DNA double helix upon hybridization with a target DNA molecule. The single nucleotide polymorphism at either the central or end position of the 25-mer target DNA has been shown to be effectively discriminated against on this platform from each other as well as from a complementary DNA by electrochemical impedance measurements. We also report adverse effects exerted by probe ions, Fe(CN)₆^3−/4−, on DNA hybridization reactions. The significance of the results for the use in DNA analysis is discussed.     

硫辛酸在金电极上自组装成膜动力学研究

自组装单层膜 (ＳＡＭ)应用广泛[1～ 3] 。但对于硫辛酸 (ＴＡ)自组装成膜动力学过程的研究尚未见报道。本研究利用石英晶体微天平 (ＱＣＭ)对ＴＡ自组装成膜过程进行在线监测 ,研究成膜动力学特征 ,并探讨浓度、温度对成膜过程的影响 ,以及在不同ｐＨ值下 ,ＳＡＭ的稳定性 ,推算了不同温度下的速率常数及成膜的活化能。1　实验部分1 1　基本原理通过监测成膜过程中石英晶体微天平 (ＱＣＭ)的振荡频率的变化 ,据Ｓａｕｅｒｂｒｅｙ方程 ,可推知在石英谐振器 (ＱＣＭ)的金电极表面 ,ＴＡ的吸附质量Γ(Γ =Δｍ Ａ ,ｇ ｃｍ2 )与ＱＣＭ的频率…     

Simultaneous detection of cadmium, copper, and lead using a carbon paste electrode modified with carbamoylphosphonic acid self-assembled monolayer on mesoporous silica (SAMMS)

A new sensor was developed for simultaneous detection of cadmium (Cd²⁺), copper (Cu²⁺), and lead (Pb²⁺), based on the voltammetric response at a carbon paste electrode modified with carbamoylphosphonic acid (acetamide phosphonic acid) self-assembled monolayer (SAM) on mesoporous silica (Ac-Phos SAMMS). The adsorptive stripping voltammetry (AdSV) technique involves preconcentration of the metal ions onto Ac-Phos SAMMS under an open circuit, then electrolysis of the preconcentrated species, followed by a square wave potential sweep towards positive values. Factors affecting the preconcentration process were investigated. The voltammetric responses increased linearly with the preconcentration time from 1 to 30 min or with metal ion concentrations ranging from 10 to 200 ppb. The responses also evolved in the same fashion as adsorption isotherm in the pH range of 2-6. The metal detection limits were 10 ppb after 2 min preconcentration and improved to 0.5 ppb after 20 min preconcentration.     

Electrocatalytic response of norepinephrine at a thiolactic acid self-assembled gold electrode

The thiolactic acid (TLA) self-assembled monolayer modified gold electrode (TLA/Au) is demonstrated to catalyze the electrochemical response of norepinephrine (NE) by cyclic voltammetry. A pair of well-defined redox waves were obtained and the calculated standard rate constant (k_s) is 5.11×10⁻³ cm s⁻¹ at the self-assembled electrode. The electrode reaction is a pseudo-reversible process. The peak current and the concentration of NE are a linear relationship in the range of 4.0×10⁻⁵–2.0×10⁻³ mol l⁻¹. The detection limit is 2.0×10⁻⁶ mol l⁻¹. By ac impedance spectroscopy the apparent electron transfer rate constant (k_app) of Fe(CN)³⁻/Fe(CN)⁴⁻ at the TLA/Au electrode was obtained as 2.5×10⁻⁵ cm s⁻¹.     

Voltammetry of immobilized cytochrome c on novel binary self-assembled monolayers of thioctic acid and thioctic amide modified gold electrodes

Horse heart cytochrome c (cyt c) was adsorbed on the binary self-assembled monolayers (SAMs) composed of thioctic acid (T-COOH) and thioctic amide (T-NH₂) at gold electrodes via electrostatic interaction. The cyt c adsorbed on the modified gold electrode exhibited well-defined reversible electrochemical behavior in 10 mM phosphate buffer solution (PBS, pH 7.0). The surface concentration (Γ) of electroactive species, cyt c, on the binary SAMs was higher than that in single-component SAMs of T-COOH, and reached a maximum value of 9.2 × 10⁻¹² mol cm⁻² when the ratio of T-COOH to T-NH₂ in adsorption solution was of 3:2, and the formal potential (E^0′=(E_pa+E_pc)/2) of cyt c was −0.032 V (vs. Ag|AgCl (3 M NaCl)) in a 10 mM PBS. The interaction between cyt c and the binary SAMs made the E^0′ shift negatively when compared with that of cyt c in solution (+0.258 V vs. NHE, i.e., +0.058 V vs. Ag|AgCl (3 M NaCl)). The fractional coverage of bound cyt c was a 0.64 theoretical monolayer. The standard electron transfer rate constant of cyt c immobilized on the binary SAMs was also higher than that on single-component SAMs of T-COOH, and the maximum value of 15.8 ± 0.6 s⁻¹ was obtained when the ratio of T-COOH to T-NH₂ in adsorption solution was at 3:2. The results suggest that the electrode modified with the binary SAMs functions better than the electrode modified with single-component SAMs of T-COOH.     

Voltammetric determination of cysteamine at multiwalled carbon nanotubes paste electrode in the presence of isoproterenol as a mediator

A sensitive electrochemical sensor for the determination of cysteamine(CA) was developed using a modified multiwall carbon nanotube paste electrode(MWCNTPE) with isoproterenol(ISPT) as a mediator.This modified electrode showed very high electrocatalytic activity for the anodic oxidation of CA.Under the optimized conditions,the electrocatalytic peak current showed a linear relationship with CA concentration in the range of 0.3–450.0 mmol/L with a detection limit of 0.09 mmol/L CA.The modified electrode was used for the determination of CA in real samples such as urine and drug samples.     

Development of a myoglobin impedimetric immunosensor based on mixed self-assembled monolayer onto gold

Immunosensors rely on antibody-antigen binding with a range of possible detection methodologies. In this study, electrochemical impedance spectroscopy was used to monitor the sensor surface assembly and recognition of the analyte (myoglobin). Myoglobin is rapidly released into the circulatory system after an acute myocardial infarction and rapidly rising levels make it the first biochemical marker of myocardial damage. The immunosensor fabrication steps comprised the steps of (a) formation of mixed self-assembled monolayers (mSAM) on gold electrodes using a mixture of biotinyl-phospholipid and mer captohexadecanoic acid; (b) neutravidin functionalisation and (c) attachment of biotinyl anti-myoglobin antibodies. A range of analyte concentration (10⁻¹²–10⁻⁶ M) was successfully detected in phosphate buffered saline and in serum concentration ranging from 10% (v/v) to 100% (v/v) serum. Quartz crystal microbalance and atomic force microscopy studies were carried out to study each step of fabrication to elucidate binding characteristics and surface topography. Correspondence: Morsaline Billah, Institute of Membrane and Systems Biology, Garstang Building, University of Leeds, Woodhouse Lane, Leeds LS2 9JT, United Kingdom     

Studies on interaction of porphyrin and its complexes with DNA at interface on gold electrode modified by thiol-porphyrin self-assembled monolayer

The interaction of 5-[p-(mercaptopropyloxy)-phenyl]-10, 15, 20-triphenylporphyrin (H₂MPTPP) and its metalloporphyrin (Co, Ni-MPTPP) with calf thymus deoxyribonucleic acid (DNA) has been studied on gold electrode modified by thiol-porphyrin self-assembled monolayer (SAM). The mode and characteristics of their interaction with DNA have been studied by cyclic voltammetry, scanning electrochemical microscope (SECM), and alternating current (AC) impedance. Some electrochemical parameters have been determined, i.e., apparent heterogeneous reaction rate constant (k _eff from SECM and k _f from AC impedance) and the hindrance (B) of electrode. K₃[Fe(CN)₆] was used as probe to obtain some electrochemical information of electrode interface. SECM images obtained from interface on SAM interacted with DNA showed very good resolution with different topography. Based on a comparison with the results from experiments, a reasonable agreement between SECM and AC impedance can be obtained, which means a conjunction of them. It is proposed to be electrostatic interaction of H₂MPTPP, Co-MPTPP and Ni-MPTPP with DNA, and the attractive force between porphyrins and DNA follows the order Ni-MPTPP > Co-MPTPP > H₂MPTPP.     

Electroanalysis of dopamine at a gold electrode modified with N-acetylcysteine self-assembled monolayer

Voltammetric behavior of dopamine (DA) on a gold electrode modified with the self-assembled monolayer (SAM) of N-acetylcysteine has been investigated, and one pair of well-defined redox peaks of dopamine is obtained at the SAM modified gold electrode. The oxidation peak current increases linearly with the concentration of dopamine in the range of  mol l⁻¹. The detection limit is 8.0×10⁻⁷ mol l⁻¹. This method will be applicable to the determination of dopamine in injection of dopamine hydrochloride, and the good recovery of dopamine is obtained. Furthermore, The SAM modified gold electrode can resolve well the voltammetric responses of dopamine and ascorbic acid (AA), so it can also be applied to the determination of dopamine in the presence of ascorbic acid.     

Electrochemical Characterization of In Situ Functionalized Gold Cysteamine Self‐Assembled Monolayer with 4‐Formylphenylboronic Acid for Detection of Dopamine

Functionalization of gold cysteamine (Au? CA) self‐assembled monolayer with 4‐formylphenylboronic acid (BA) via Schiff's base formation, through in situ method to fabricate Au‐CA‐BA electrode is presented and described. The fabricated electrode was used as a novel sensor for accumulation and determination of dopamine (DA). The accumulation of DA as a diol on the topside of Au‐CA‐BA as a Lewis acid, was performed via esterification (Au? CA? BA? DA), and followed for determination of DA. Functionalization, characterization, and determination steps were probed by electrochemical methods like cyclic voltammetry and electrochemical impedance spectroscopy. The data will be presented and discussed from which a new sensor for DA is introduced.     

Voltammetric determination of Cu(II) in natural waters and human hair at a meso-2,3-dimercaptosuccinic acid self-assembled gold electrode

An electrochemical sensor for the detection of copper(II) ions is described using a meso-2,3-dimercaptosuccinic acid (DMSA) self-assembled gold electrode. First in ammonia buffer pH 8, copper(II) ions complex with self-assembled monolayer (SAM) via the free carboxyl groups on immobilized meso-2,3-dimercaptosuccinic acid (accumulation step). Then, the medium is exchanged to acetate buffer pH 4.6 and the complexed Cu(II) ions are reduced in negative potential of −0.3 V (reduction step). Following this, reduced coppers are oxidized and detected by differential pulse (DP) voltammetric scans from −0.3 to +0.7 V (stripping step). The effective parameters in sensor response were examined. The detection limit of copper(II) was 1.29 μg L⁻¹ and R.S.D. for 200 μg L⁻¹ was 1.06%. The calibration curve was linear for 3-225 μg L⁻¹ copper(II). The procedure was applied for determination of Cu(II) to natural waters and human hairs. The accuracy and precision of results were comparable to those obtained by flame atomic absorption spectroscopy (FAAS).     

Electrocatalytic oxidation and detection of hydrazine at gold electrode modified with iron phthalocyanine complex linked to mercaptopyridine self-assembled monolayer

Electrocatalytic oxidation and detection of hydrazine in pH 7.0 conditions were studied by using gold electrode modified with self-assembled monolayer (SAM) films of iron phthalocyanine (FePc) complex axially ligated to a preformed 4-mercaptopyridine SAMs. The anodic oxidation of hydrazine in neutral pH conditions with FePc-linked-mercaptopyridine-SAM-modified gold electrode occurred at low overpotential (0.35 V versus Ag|AgCl) and the treatment of the voltammetric data showed that it was a pure diffusion-controlled reaction with the involvement of one electron in the rate-determining step. The mechanism for the interaction of hydrazine with the FePc-SAM is proposed to involve the Fe^(III)Pc/Fe^(II)Pc redox process. Using cyclic voltammetry (CV) and Osteryoung square wave voltammetry (OSWV), hydrazine was detected over a linear concentration range of 1.3 × 10⁻⁵ to 9.2 × 10⁻⁵ mol/L with low limits of detection (ca. 5 and 11 μM for OSWV and CV, respectively). At concentrations higher than 1.2 × 10⁻⁴ mol/L the anodic peak potential shifted to 0.40 V (versus Ag|AgCl), and this was interpreted to be due to kinetic limitations resulting from the saturation of hydrazine and its oxidation products onto the redox-active monolayer film. This type of metallophthalocyanine-SAM-based electrode is a highly promising electrochemical sensor given its ease of fabrication, good catalytic activity, stability, sensitivity and simplicity.     

Electrochemical study and detection of perphenazine using a gold electrode modified with decanethiol SAM

A novel method for the determination of perphenazine has been developed. The method is based on the accumulation of perphenazine at a gold electrode modified with decanethiol (DEC) self-assembled monolayer (SAM) and its oxidation at about 0.6 V (vs. saturated calomel electrode (SCE)). Because some coexistent electroactives were blocked and perphenazine was selectively accumulated by the SAM, the electrode exhibited good selectivity and sensitivity. Various conditions were optimized for practical application. Under the selected conditions (i.e. 0.05 M pH 10 sodium borate buffer, accumulation time: 120 s, accumulation potential: −0.4 V, scan rate: 100 mV s⁻¹), the anodic stripping peak current was linear to perphenazine concentration in the ranges of 6×10⁻⁹–5×l0⁻⁷ and 5×10⁻⁷–5×10⁻⁶ M with correlation coefficients of 0.998 and 0.995, respectively. For a 1.0×10⁻⁶ M perphenazine solution, the relative standard deviation of peak height was 2.3% (n=8). This method was applied to the determination of perphenazine in some drugs and the recovery was 92–101%. In addition, it was found that in the presence of perphenazine, the SAM structure changed a little and more needle holes appeared. However, the SAM could recover the original form when perphenazine and its redox product were removed from the monolayer by repeatedly cycling the electrode in a blank solution for a minute. The modified electrode was characterized by alternating current impedance and electrochemical probe.     

A microchip-based flow injection-amperometry system with mercaptopropionic acid modified electroless gold microelectrode for the selective determination of dopamine

A novel chip-based flow injection analysis (FIA) system has been developed for automatic, rapid and selective determination of dopamine (DA) in the presence of ascorbic acid (AA). The system is composed of a polycarbonate (PC) microfluidic chip with an electrochemical detector (ED), a gravity pump, and an automatic sample loading and injection unit. The selectivity of the ED was improved by modification of the gold working microelectrode, which was fabricated on the PC chip by UV-directed electroless gold plating, with a self-assembled monolayer (SAM) of 3-mercaptopropionic acid (MPA). Postplating treatment methods for cleaning the surface of electroless gold microelectrodes were investigated to ensure the formation of high quality SAMs. The effects of detection potential, flow rate, and sampling volume on the performance of the chip-based FIA system were studied. Under optimum conditions, a detection limit of 74 nmol L⁻¹ for DA was achieved at the sample throughput rate of 180 h⁻¹. A RSD of 0.9% for peak heights was observed for 19 runs of a 100 μmol L⁻¹ DA solution. Interference-free determination of DA could be conducted if the concentration ratio of AA–DA was no more than 10.