Glucose biosensing based on the highly efficient immobilization of glucose oxidase on a Prussian blue modified nanostructured Au surface

We report on a novel glucose biosensor based on the immobilization of glucose oxidase (GOx) on a Prussian blue modified nanoporous gold surface. The amperometric glucose biosensor fabricated in this study exhibits a fast response and the very low detection limit of 2.5 μM glucose. The sensitivity of the biosensor was found to be very high, 177 μA/mM; the apparent Michaelis–Menten constant is calculated to be 2.1 mM. In addition, the biosensor has good reproducibility and remains stable over 60 days. The anti-interference ability of the biosensor was also assessed, showing little interference from possible interferents such as ascorbic acid (AA), acetaminophen (AP) and uric acid (UA).     

Amperometric biosensors based on the immobilization of oxidases in a Prussian blue film by electrochemical codeposition

Prussian blue has been formed by cyclic voltammetry onto the basal pyrolytic graphite surface to prepare a chemically modified electrode which provides excellent electrocatalysis for both oxidation and reduction of hydrogen peroxide. It is found for the first time that glucose oxidase or -amino oxidase can be incorporated into a Prussian blue film during its electrochemical growth process. Two amperometric biosensors were fabricated by electrochemical codeposition, and the resulting sensors were protected by coverage with a thin film of Nafion. The influence of various experimental conditions was examined for optimum analytical performance. The glucose sensor responds rapidly to substrates with a detection limit of 2 × 10⁻⁶ M and a linear concentration range of 0.01–3 mM. There was no interference from 2 mM ascorbic acid or uric acid. Another ( -amino acid) sensor gave a detection limit of 3 × 10⁻⁵ M -alanine, injected with a linear concentration range of 7.0 × 10⁻⁵-1.4 × 10⁻² M. Glucose and -amino acid sensors remain relatively stable for 20 and 15 days, respectively. There is no obvious interference from anion electroactive species due to a low operating potential and excellent permselectivity of Nafion.     

Preparation of GOD/Sol‐Gel Silica Film on Prussian Blue Modified Electrode for Glucose Biosensor Application

A novel amperometric glucose biosensor was fabricated by in situ incorporating glucose oxidase (GOD) within the sol‐gel silica film on a Prussian blue (PB) modified electrode. The method is simple and controllable, which combined the merits of in situ immobilizing biomolecules in sol‐gel silica film by electrochemical method and the synergic catalysis effects of PB and GOD molecules. Scanning electron microscopy (SEM) showed that the GOD/sol‐gel silica film was homogeneous with a large number of three‐dimensional nanopores, which not only enhanced mass transport, but also maintained the active configuration of the enzyme molecule and prevented the leakage of enzyme, therefore improved the stability and sensitivity of the biosensor. The fabricated biosensor showed fast response time (10 s), high sensitivity (26.6 mA cm^?2 M^?1), long‐term stability, good suppression of interference, and linear range of 0.01 mM–5.8 mM with a low detection limit of 0.94 μM for the detection of glucose. In addition, the biosensor was successfully applied to determine glucose in human serum samples.     

Biosensors for determination of glucose with glucose oxidase immobilized on an eggshell membrane

A glucose biosensor using an enzyme-immobilized eggshell membrane and oxygen electrode for glucose determination has been fabricated. Glucose oxidase was covalently immobilized on an eggshell membrane with glutaraldehyde as a cross-linking agent. The glucose biosensor was fabricated by positioning the enzyme-immobilized eggshell membrane on the surface of a dissolved oxygen sensor. The detection scheme was based on the depletion of dissolved oxygen content upon exposure to glucose solution and the decrease in the oxygen level was monitored and related to the glucose concentration. The effect of glutaraldehyde concentration, pH, phosphate buffer concentration and temperature on the response of the glucose biosensor has been studied in detail. Common matrix interferents such as ethanol, d-fructose, citric acid, sodium benzoate, sucrose and l-ascorbic acid did not give significant interference. The resulting sensor exhibited a fast response (100 s), high sensitivity (8.3409 mg L⁻¹ oxygen depletion/mmol L⁻¹ glucose) and good storage stability (85.2% of its initial sensitivity after 4 months). The linear response is 1.0×10⁻⁵ to 1.3×10⁻³ mol L⁻¹ glucose. The glucose content in real samples such as commercial glucose injection preparations and wines was determined, and the results were comparable to the values obtained from a commercial glucose assay kit based on a spectrophotometric method.     

Glucose biosensor based on three dimensional ordered macroporous self-doped polyaniline/Prussian blue bicomponent film

In this paper, a three dimensional ordered macroporous self-doped polyaniline/Prussian blue (3DOM SPAN/PB) bicomponent film was fabricated via the inverted crystal template technique using step-by-step electrodeposition. In this bicomponent film, PB not only acted as a redox mediator, but also presented increased stability in neutral or weak alkaline solution by the protection of SPAN layer on the top. A novel glucose biosensor was fabricated based on the large active surface area and excellent conductivity possessed by the 3DOM SPAN/PB film. The applying experimental conditions of the glucose biosensor have been optimized. Under the optimal conditions, the biosensor showed a wide linear range over three orders of magnitude in glucose concentrations (from 2 to 1600 μM) and a low detection limit of 0.4 μM. Moreover, the biosensor exhibited short response time, high selectivity and excellent operation stability, which can be applied to detect the blood sugar in real samples without any pretreatment.     

A novel amperometric biosensor based on NiO hollow nanospheres for biosensing glucose

NiO hollow nanospheres were synthesized by controlled precipitation of metal ions with urea using carbon microspheres as templates, which were for the first time adopted to construct a novel amperometric glucose biosensor. Glucose oxidase was immobilized on the surface of hollow nanospheres through chitosan-assisted cross-linking technique. Due to the high specific active sites and high electrocatalytic activity of NiO hollow nanospheres, the constructed glucose biosensors exhibited a high sensitivity of 3.43 μA/mM. The low detection limit was estimated to be 47 μM (S/N = 3), and the Michaelis-Menten constant was found to be 7.76 mM, indicating the high affinity of enzyme on NiO hollow nanospheres to glucose. These results show that the NiO hollow nanospheres are a promising material to construct enzyme biosensors.     

Development of a Novel Silver Nanoparticles-Enhanced Screen-Printed Amperometric Glucose Biosensor

Abstract

A disposable glucose biosensor is developed by immobilizing glucose oxidase into silver nanoparticles-doped silica sol-gel and polyvinyl alcohol hybrid film on a Prussian blue-modified screen-printed electrode. The silver nanoparticles-enhanced biosensor shows a linear amperometric response to glucose from 1.25 × 10^?5 to 2.56 × 10^?3 with a sensitivity of 20.09 mA M^?1 cm^?2, which is almost double that of the biosensors without silver nanoparticles. The immobilized glucose oxidase retained 91% of its original activity after 30 days of storage in phosphate buffer (pH 6.9; 0.1 M) at 4°C. Blood glucose in a rabbit serum sample was successfully measured with the biosensor.     

Photochemical synthesis of Prussian blue film from an acidic ferricyanide solution and application

We describe a novel photochemical method to synthesize compacted Prussian blue (PB) film from an acidic ferricyanide solution. The key step is the photochemical reduction of ferricyanide ion to ferrocyanide ion that subsequently coordinates with the free ferric ion dissociated from the ferricyanide in acidic medium to form Prussian blue on the illuminated electrode surface. The prepared PB film electrode shows high electrocatalytic activity towards the reduction of hydrogen peroxide and the amperometric responses show a linear dependence on the concentration of hydrogen peroxide in a range of 1.0 × 10⁻⁶ to 1.2 × 10⁻³ M with a detection limit down to 4 × 10⁻⁷ M. The present photochemical method provides a simple and promising route for the local fabrication of patterned molecular magnets, ion-selective sensors, and electro- or photochromic devices.     

Preparation of Three‐Dimensional Ordered Macroporous Prussian Blue Film Electrode for Glucose Biosensor Application

Ordered 3D interconnected macroporous Prussian blue (PB) films were electrochemically fabricated by using colloidal crystals of polystyrene beads as sacrificial templates. The prepared PB film electrodes have excellent catalytic activity towards the reduction of hydrogen peroxide. The PB structure was further used as functional interface for fabricating an enzyme‐based glucose sensor by using surface modification technique based on the electrostatic interactions. The resulted sensor has higher functional density, and larger surface area. The interconnected macroporous structure allows enhanced mass transport. These characteristics of the sensor enable us to detect glucose with high sensitivity. Therefore, the present 3D ordered macroporous film sensor exhibits wide linear detection range towards glucose, acceptable reproducibility and operational and storage stability. The present approach is promising for the generation of high‐enzyme‐content thin films with tailored bioactivity.     

Sensitive detection of potassium ion using Prussian blue nanotube sensor

A model K⁺ sensor using Prussian blue nanotubes is fabricated by electrochemical deposition of Prussian blue (PB) within the nanochannels of a porous metal-coated membrane with partially covered pore openings. The PB nanotube sensor exhibits excellent stability giving reproducible peak potentials up to 500 measurement cycles, a very low detection limit of 2.0 × 10⁻⁸ M and extremely wide logarithmic linear ranges between 5.0 × 10⁻⁸–7.0 × 10⁻⁴ M and 7.0 × 10⁻⁴–1.0 M. Negligible interferences by Na⁺, Mg²⁺ and Ca²⁺ are observed and a rapid analysis time of 30 s is readily achieved. The ease of electrodeposition, high stability of PB nanotubes and outstanding analytical performance which surpasses conventional PB voltammetric and potentiometric sensors demonstrates potential sensing applications including ion sensors and biosensors using PB and other metal hexacyanoferrate nanotubes.     

掺杂纳米普鲁士蓝溶胶-凝胶修饰葡萄糖生物传感器

采用溶胶-凝胶法制备了纳米普鲁士蓝微粒,将含纳米普鲁士蓝微粒的TiO2溶胶-凝胶固定在玻碳电极表面得到纳米普鲁士蓝修饰电极,该电极对H2O2产生灵敏的响应,线性范围为0．5～400μmoL／L,较常规普鲁士蓝修饰电极(线性范围为25～500μmol／L)灵敏。电极表面再用溶胶．凝胶法固定葡萄糖氧化酶后构建了葡萄糖生物传感器,响应范围0～20mmoL／L,葡萄糖氧化酶表观米氏常数为8．04mmoL／L。实验表明,该法适合于批量制作高灵敏和高重现性的生物传感器。     

Amperometric Glucose Biosensors Based on Integration of Glucose Oxidase onto Prussian Blue/Carbon Nanotubes Nanocomposite Electrodes

Nanosized Prussian blue (PB) particles were synthesized with a chemical reduction method and then the PB nanoparticles were assembled on the surface of multiwall carbon nanotubes modified glassy carbon electrode (PB/MWNTs/GCE). The results showed that the PB/MWNTs nanocomposite exhibits a remarkably improved catalytic activity towards the reduction of hydrogen peroxide. Glucose oxidase (GOD) was immobilized on the PB/MWNTs platform by an electrochemically polymerized o‐phenylenediamine (OPD) film to construct an amperometric glucose biosensor. The biosensor exhibited a wide linear response up to 8 mM with a low detection limit of 12.7 μM (S/N=3). The Michaelis–Menten constant K_m and the maximum current i_max of the biosensor were 18.0 mM and 4.68 μA, respectively. The selectivity and stability of the biosensor were also investigated.     

Development of an Enzymeless/Mediatorless Glucose Sensor Using Ruthenium Oxide‐Prussian Blue Combinative Analogue

Presented in this work is the first step towards an enzymeless/mediatorless glucose sensor. We first observed remarkable electrocatalytic oxidation of glucose using combinative ruthenium oxide (RuOx)‐Prussian blue (PB) analogues (designated as mvRuOx‐RuCN, mv: mixed valent) at ca. 1.1 V (vs. Ag/AgCl) in acidic media (pH 2 Na₂SO₄/H₂SO₄). Individual RuOx and PB analogs failed to give any such catalytic response. A high ruthenium oxidation state (i.e., oxy/hydroxy‐Ru^VII, E°≈1.4 V vs. RHE), normally occurring in strong alkaline conditions at RuOx‐based electrodes, was electrogenerated and stabilized (without any conventional disproportionation reaction) in the mvRuOx‐RuCN matrix for glucose catalysis. Detail X‐ray photoelectron spectroscopic studies can fully support the observation. The catalyst was chemically modified onto a disposable screen‐printed carbon electrode and employed for the amperometric detection of glucose via flow injection analysis (FIA). This system has a linear detection range of 0.3–20 mM with a detection limit and sensitivity of 40 μM (S/N=3) and 6.2 μA/(mM cm²), respectively, for glucose. Further steps towards the elimination of interference and the extendibility to neutral pHs were addressed.     

New Nanocomposite Based on Prussian Blue Nanoparticles/Carbon Nanotubes/Chitosan and Its Application for Assembling of Amperometric Glucose Biosensor

Abstract

A new nanocomposite was developed by combination of prussian blue (PB) nanoparticles and multiwalled carbon nanotubes (MWNTs) in the matrix of biopolymer chitosan (CHIT). The PB and MWNTs had a synergistic electrocatalytic effect toward the reduction of hydrogen peroxide. The CHIT/MWNTs/PB nanocomposite‐modified glassy carbon (GC) electrode could amplify the reduction current of hydrogen peroxide by ～35 times compared with that of CHIT/MWNTs/GC electrode and reduce the response time from ～60 s for CHIT/PB/GC to 3 s. Besides, the CHIT/MWNTs/PB nanocomposite‐modified GC electrode could reduce hydrogen peroxide at a much lower applied potential and inhibit the responses of interferents such as ascorbic acid (AA) uric acid (UA) and acetaminophen (AC). With glucose oxidase (GOx) as an enzyme model, a new glucose biosensor was fabricated. The biosensor exhibited excellent sensitivity (the detection limit is down to 2.5 µM), fast response time (less than 5 s), wide linear range (from 4 µM to 2 mM), and good selection.     

中空和基底支撑型普鲁士蓝及其类似物和衍生物用于绿色水分解

随着世界对能源需求的日益增长,为减少对化石燃料的严重依赖同时实现碳达峰和碳中和,迫切需要探索发现新型能源和能源载体.与其他燃料相比,氢气具有零碳排放、能量密度高、清洁可再生和来源广泛等特点,因此被认为是理想的能源载体.目前,工业制氢主要有三种策略,分别是甲烷水蒸气重整(SMR)、煤炭水蒸气(CG)和水电解(WE).其中SMR和CG制氢占95％,而WE制氢仅占4％.虽然前二者制氢成本较低,但会伴生大量的二氧化碳,相比之下,WE制氢纯度高,绿色无污染,更加符合目前的环保理念.目前WE制氢的核心问题之一就是设计和合成高效、廉价的电催化剂.具有类贵金属催化性能的过渡金属基电催化剂(例如钴基、镍基和铁基材料)已经引起了学术界的广泛关注.配位聚合物(CP)由于其具有固有的金属元素、内部结构化学可调、比表面积大和结构有序等优点,在吸附、催化和储能等领域得到了广泛的应用.作为18世纪发现的第一个人工配位聚合物,普鲁士蓝(PB)及其类似物(PBAs)和具有可调金属中心的衍生物作为一种新型的光催化剂或电催化剂受到了广泛的关注.本综述详细介绍了以普鲁士蓝及其类似物和衍生物构筑的中空结构和基底支撑型纳米材料在绿色水分解方面的基础研究及应用进展.本文首先简单介绍了普鲁士蓝及其类似物的基本结构组成,并对其优缺点进行了总结;随后,针对普鲁士蓝及其类似物的中空结构的合成策略和形成机理展开了详细地阐述,包括单层中空纳米盒、开孔式纳米笼以及复杂中空结构等;此外,针对基底支撑型普鲁士蓝及其类似物结构合成机理也进行了详细地解释,包括泡沫镍网、铁网、碳布、铜网等基底,并与中空结构进行了对比总结,该类负载型结构可以充分发挥活性位的利用效率,达到更好的催化性能.此外,结合最新的研究进展,介绍了普鲁士蓝及其类似物和衍生物(氢氧化物、磷化物、硫族化合物和碳化物)在水裂解中的应用,包括电解水和光催化制氢,并对电解水的机理进行了总结.最后,本文总结了该领域目前存在的局限性和面临的紧迫挑战.希望本综述能够激发更多研究者投身于复杂结构普鲁士蓝及其类似物和衍生物的高效绿色水裂解方面的研究工作.     

Development of an amperometric glucose biosensor based on the immobilization of glucose oxidase in an ormosil-PVA matrix onto a Prussian Blue modified electrode

An amperometric glucose biosensor was developed based on the immobilization of glucose oxidase in the organically modified silicate (ormosil)-polyvinyl acetate (PVA) matrix onto a Prussian Blue (PB)-modified glassy carbon electrode. A higher stability PB-modified electrode was prepared by the electrochemical deposition of FeCl₃, K₃[Fe(CN)₆] and ethylenediamine tetraacetic acid (EDTA) under cyclic voltammetric (CV) conditions. The effects of the potential range of CV conditions, electrolyte cations, applied potential, pH, temperature and co-existing substances were investigated. The detection limit of the glucose biosensor was 8.1 μmol·L⁻¹ (S/N = 3) with a linear range from 20 μmol·L⁻¹ to 2 mmol·L⁻¹ (R = 0.9965). The biosensor presented a fast response and good selectivity. Additionally, excellent reproducibility and stability of the biosensor were observed. Supported by the National High Technical Development Project (863 project) Foundation (Grant No. 2006AA09Z160) and the National Natural Science Foundation of China (Grant No. 20775064)     

Fabrication of interdigitated high-performance zinc oxide nanowire modified electrodes for glucose sensing

Diabetes is a metabolic disease with a prolonged elevated level of glucose in the blood leads to long-term complications and increases the chances for cardiovascular diseases. The present study describes the fabrication of a ZnO nanowire (NW)-modified interdigitated electrode (IDE) to monitor the level of blood glucose. A silver IDE was generated by wet etching-assisted conventional lithography, with a gap between adjacent electrodes of 98.80 μm. The ZnO-based thin films and NWs were amended by sol–gel and hydrothermal routes. High-quality crystalline and c-axis orientated ZnO thin films were observed by XRD analyses. The ZnO thin film was annealed for 1, 3 and 5 h, yielding a good-quality crystallite with sizes of 50, 100 and 110 nm, and the band gaps were measured as 3.26, 3.20 and 3.17 eV, respectively. Furthermore, a flower-modeled NW was obtained with the lowest diameter of 21 nm. Our designed ZnO NW-modified IDE was shown to have a detection limit as low as 0.03 mg/dL (correlation coefficient = 0.98952) of glucose with a low response time of 3 s, perform better than commercial glucose meter, suitable to instantly monitor the glucose level of diabetes patients. This study demonstrated the high performance of NW-mediated IDEs for glucose sensing as alternative to current glucose sensors.     

Automated determination of glucose in soluble coffee using Prussian Blue-glucose oxidase-Nafion((R)) modified electrode

A highly selective, fast and stable biosensor for determination of glucose in soluble coffee has been developed. The biosensor electrode consist of a thin film of ferric hexacyanoferrate (Prussian Blue or PB) electrodeposited on the glassy carbon electrode (GCE) (to provide a catalytic surface for the detection of hydrogen peroxide) glucose oxidase immobilized on top of the electrode and a Nafion^® polymer layer. The stability of the PB film and the biosensor was evaluated by injecting standard-solution (50 μM H₂O₂ and 0.5 mM glucose) during 4 h in a flow-injection system with the electrodes polarized at −50 mV versus Ag/AgCl. The system is able to handle about 60 samples per hour and is very stable and suitable for industrial control. Determination of glucose in the range 2.5 and 15% (w/v) in phosphate buffer with precision (r.s.d. < 1.5%) has been achieved and is in agreement with the conventional procedures. Linear calibration in the range of 0.15 and 2.50 mM with detection limits of ca. 0.03 mM has been obtained. The morphology of the enzyme glucose oxidase on the modified electrode has been analyzed by scanning electron microscopy (SEM) measurements.     

Multinuclear macromolecule metal complexes 2. Preparation and characterization of Prussian blue and its analogs bonded to pofy(vinylamine hydrochloride)

Prussian blue and its analogs bonded to poly(vinylamine hydrochloride) (PVAm · HCl) containing Fe^II or Fe^III and M²⁺ (M=Fe, Co, Cu) in a 11 molar ratio were obtained by the reaction of [Fe(CN)₆] ^n– (n=3,4) with M²⁺ ion-PVAm · HCl mixture in aqueous solution. Under a limited polymer concentration (T_VAm/T_Fe over 10), these polymer complexes thus obtained were stable and soluble in water. By casting these solutions, colored films can be produced. The formation of Prussian blue and its analogs bonded to PVAm · HCl was also investigated by the Benesi-Hildebrand method. The molar extinction coefficients of intervalence charge transfer (Fe^IIFe^III, Co^IIFe^III, Fe^IICu^II) band for MFe(CN)₆]^(n–2)– bound to PVAm · HCl (M=Fe, Co, Cu) were found to be 10,100–9601 · mol^–1 · cm^–1 at 25 C. The formation constants were found to be in the range of 10⁷ to 10¹⁰ M^–1. The changes of enthalpy (H) and entropy (S) were found to be in the range of –10.4 to –22.5 kJ · mol^–1 and 5.7 to 52.9 J · K^–1 mol^–1 respectively, at 25C.     

Integration of a highly ordered gold nanowires array with glucose oxidase for ultra-sensitive glucose detection

A highly sensitive amperometric nanobiosensor has been developed by integration of glucose oxidase (GO_x) with a gold nanowires array (AuNWA) by cross-linking with a mixture of glutaraldehyde (GLA) and bovine serum albumin (BSA). An initial investigation of the morphology of the synthesized AuNWA by field emission scanning electron microscopy (FESEM) and field emission transmission electron microscopy (FETEM) revealed that the nanowires array was highly ordered with rough surface, and the electrochemical features of the AuNWA with/without modification were also investigated. The integrated AuNWA–BSA–GLA–GO_x nanobiosensor with Nafion membrane gave a very high sensitivity of 298.2 μA cm⁻² mM⁻¹ for amperometric detection of glucose, while also achieving a low detection limit of 0.1 μM, and a wide linear range of 5–6000 μM. Furthermore, the nanobiosensor exhibited excellent anti-interference ability towards uric acid (UA) and ascorbic acid (AA) with the aid of Nafion membrane, and the results obtained for the analysis of human blood serum indicated that the device is capable of glucose detection in real samples.