Highly Sensitive Membrane Electrode Based on a Copper(II)-bis(N-4-Methylphenyl-Salicyldenaminato) Complex for the Determination of Chromate

A highly sensitive polyvinyl chloride (PVC) membrane electrode, based on copper(II)-bis(N-4-methylphenyl-salicyldenaminato) complex, (CuL₂), as a carrier was reported for the determination of chromate ion. The influence of membrane composition, pH, and possible interfering anions on the response of the ion selective electrode was investigated. The sensor exhibited a Nernstian slope of 29.7 mV per decade when the chromate concentration was varied between 2.0 × 10^?7–1.50 × 10^?2 M in a wide pH range (6.0 to 9.0). The detection limit of the ion selective electrode was 9.2 × 10^?8 M. The proposed sensor was used for at least 4 months without any considerable divergence in potential. It was applied as indicator electrode in potentiometric titration of chromate ion with Pb²⁺ and Tl⁺.     

新型双核铜金属配合物为中性载体的硫氰酸根离子高选择性电极的研究

研制了基于N,N'-亚乙基(μ-5,5-亚甲基-二水杨醛根)(乙酰丙酮根)合二铜(II) [Cu₂(II)-MDSBAE]金属配合物为中性载体的阴离子选择性电极. 试验表明, 以Cu₂(II)-MDSBAE金属配合物为中性载体的电极对SCN^－具有良好的电位响应特性, 且呈现反Hofmeister行为,其选择性序列为: SCN^－＞Sal^－＞I^－＞ClO₄^－＞NO₃^－＞Br^－＞NO₂^－＞Cl^－≈SO₃^2－＞SO₄^2－. 在pH 5.0的磷酸盐缓冲体系中, 电极电位呈现近能斯特响应, 线性响应范围为1.0×10^－6～1.0×10^－1 mol/L, 斜率为－53. 6 mV/dec (25 ℃), 检测下限为8.1×10^－7 mol/L. 用交流阻抗研究了电极的响应机理, 并用紫外可见光谱技术测定了电极载体与SCN^－, Sal^－, I^－, ClO₄^－和NO₃^－离子间的配位数及缔合常数. 将该电极用于实验室废水和工业废水中硫氰酸根的检测, 其结果令人满意.     

Thiocyanate-selective electrode based on N-salicylidene-benzylamineato copper(II) complex

Highly selective poly(vinyl chloride) (PVC) membrane electrode based on N-salicylidene-benzylamineato copper(II) complexes [Cu(SBA)₂] as new carriers towards thiocyanate-selective electrode was reported. The influence of membrane composition, pH and possible interfering anions were investigated on the response properties of the electrode. The resulting electrode exhibits anti-Hofmeister selectivity sequence: SCN⁻ > ClO₄⁻ > Sal⁻ > I⁻ > Br⁻ > NO₃⁻ > NO₂⁻ > SO₃²⁻ > H₂PO₄⁻ > Cl⁻ > SO₄²⁻, and a near-Nernstian potential linear range for thiocyanate from 1.0 × 10⁻¹ to 9.0 × 10⁻⁷ M with a detection limit of 7.0 10⁻⁷ M and a slope of , over a wide pH range of 3.0–9.0 in phosphate buffer solution at 20°C. The proposed electrode has a fast response time of about 5–10 s and can be used for at least 3 months without any considerable divergence in potential. The electrode was successfully applied to the determination of thiocyanate in waste water and human urine and saliva samples. Published in Russian in Elektrokhimiya, 2008, Vol. 44, No. 3, pp. 293–299. The text was submitted by the authors in English.     

Solution equilibria and stability of the complexes of pyridinecarboxylic acids: Complexation reaction of mercury(II) with 2-hydroxynicotinic acid

Summary The solution equilibria of 2-hydroxynicotinic acid (hyna) complexes with mercury(II) have been studied spectrophotometrically in 50% (v/v) ethanol at 20°C and an ionic strength of 0.1mol dm^–3 (NaClO₄). Three mercuric complexes are formed in solution in dependence on the acidity of the medium. The basic characteristics of the different complexes are determined and the analytical aspects of the complexation reaction are demonstrated. A critical investigation has also been presented of the solution equilibria and stability of the mixed complex of mercury(II) withhyna and thiosalicylic acid (tsa). The various complex transitions leading to the formation of the 1 : 1 : 1 Hg(tsa)(hyna) ternary complex in solution are investigated. The non-charged mono-ligand complex Hg(hyna) is used for UV-spectrophotometric determination of mercury atpH 4.5–5 (_max=325nm, =0.8·10⁴lmol^–1cm^–1). The system obeyed Beer's law up to 36.1 µg ml^–1 of Hg(II). The optimum concentration range (Ringbom) is between 6 and 28.5µg ml^–1. Interference caused by a number of ions was masked by the addition of fluoride ions.

---

Lösungsgleichgewichte und Stabilitätskonstanten von Komplexen der Pyridincarbonsäuren: Die Komplexierungsreaktion von Quecksilber(II) mit 2-Hydroxynikotinsäure

Zusammenfassung Die Lösungsgleichgewichte von 2-Hydroxynikotinsäure (hyna) mit Hg(II) wurde spektrophotometrisch in 50% (v/v) Ethanol bei 20°C und einer Ionenstärke von 0.1 mol dm^–3 (NaClO₄) untersucht. In Abhängigkeit von der Acidität des Mediums werden drei Quecksilberkomplexe gebildet. Die grundlegenden Charakteristika der Komplexe wurden bestimmt und die analytischen Aspekte aufgezeigt. Die gemischten Komplexe von Hg(II) mithyna und Thiosalicylsäure (tsa), insbesondere die verschiedenen Komplexübergänge zum ternären 1 : 1 : 1 Hg(tsa)(hyna)-Komplex, wurden ebenfalls untersucht. Der ungeladene Monoligandenkomplex Hg(hyna) kann beipH 4.5–5 zur UV-spektroskopischen Quecksilberbestimmung eingesetzt werden (_max=325nm, =0.8·10⁴lmol^–1cm^–1). Das System gehorcht bis zu einer Hg(II)-Konzentration von 36.1µgml^–1 dem Beerschen Gesetz. Der optimale Konzentrationsbereich (Ringbom) liegt zwischen 6 und 28.5µgml^–1. Interferenzen mit einer Reihe anderer Ionen konnten durch Maskierung mit Fluoridionen umgangen werden.

     

Conductometric and microcalorimetric analysis of the alkaline-earth/alkali-metal ion exchange onto polyacrylic acid

The specificity of the exchange between divalent (Di²⁺ = Ca²⁺ or Ba²⁺) and monovalent (M⁺ = Li⁺, Na⁺ or K⁺) ions onto a polyacrylic chain is examined using conductometric and microcalorimetric techniques. Assuming the formation of a bidentate complex between the Di²⁺ and the carboxylate groups, the conductometric data give the exchange ratio (Di²⁺/M⁺) and the speciation of the acrylic groups. No significant difference is observed between the three alkali-metal ions for a given Di²⁺ ion. Comparisons between Ca²⁺ and Ba²⁺ show a stronger hydrophobicity of the former as it precipitates at a complexation ratio r = 0.33 versus r = 0.45 for the Ba²⁺ salt. Microcalorimetric data show that all Di²⁺/M⁺ exchange energies are positive and depend significantly on the type of cations. The largest displacement energy (the more positive) is found for the binding of Ca²⁺ with sodium polyacrylate (8.13 kJ · mol⁻¹) and the smallest for Ba²⁺ with lithium polyacrylate (1.88 kJ · mol⁻¹). The interpretation of the data leads to the conclusion that specificity of the Di²⁺ binding originates in the dehydration phenomenon and specificity between the three alkali-metal ions is due to the decrease in the electrostatic bond strength with an increase in the ionic radii. The Di²⁺/M⁺ exchange is entropically driven. Received: 28 January 1999 Accepted in revised form: 7 April 1999     

Theoretical study of the spectral behavior of the complex of a recently synthesized aminoxanthone derivative with copper(II) ion in water and methanol

The complexation of a recently synthesized aminoxanthone derivative, 1-({2-[(2-aminoethyl)amino]ethyl}amino)-6-methyl-9H-xanthen-9-one with Cu(II) in methanol and water solutions, was investigated by spectrofluorimetric and spectrophotometric methods. The possible molecular geometries, bindings, and spectroscopic properties for the formed complex were theoretically studied in detail by the Hyperchem program. The stoichiometry of the complex was determined from spectrophotometric molar ratio methods at 20°C. The spectral data were further treated by KINFIT program to calculate the formation constant of the 1:3 complex and its molar absorptivity. Program DATAN was used to calculate the spectral behavior of the complex in each solution for different mole ratios. A simple equation for the determination of complex stability constant was also evaluated from titration data. Under the optimal conditions, the ligand can be used as a fluorometric indicator for measuring Cu²⁺ ions in aqueous solution.     

New spectrophotometric method for the determination of trace amounts of palladium

Summary A simple, rapid, selective, and sensitive method for the spectrophotometric determination of palladium is developed based on the reaction of Pd(II) with 1-amino-4-hydroxyanthraquinone (AMHA). The reaction is carried out atpH 3.8 in 50% (v/v) ethanol-water medium. The molar absorptivity of the complexed ligand is 1.1 · 10⁴ l mol^–1 cm^–1 at 620 nm. Calibration plots are linear up to 17 µg Pd cm^–3. The optimum concentration range (Ringbom plot) is between 3–14.5 µg cm^–3. The spectral study of the reaction in solutions containing equimolar concentrations or an excess of one component, in thepH range 0.3–6.5, indicate the possible complex transitions that occur in solution. Complete graphical and logarithmic analysis of the absorbance-pH graphs was performed to demonstrate and characterize the complexation equilibria in solution. Under the optimum conditions, palladium can be determined as the noncharged complex Pd(AMHA)₂ in the presence of a large number of foreign ions. Interferences caused by zirconium(IV) could be masked with fluoride ions.

---

Eine neue spektrophotometrische Methode für die Bestimmung von Palladium in Spuren

Zusammenfassung Eine einfache, schnelle und empfindliche Methode für die spektrophotometrische Bestimmung von Palladium wurde auf der Basis der Reaktion von Pd(II) mit 1-Amino-4-hydroxyanthrachinon (AMHA) entwickelt. Die Reaktion wird in 50% (v/v) Ethanol/Wasser beipH 3.8 ausgeführt. Die molare Absorption des komplexierten Liganden beträgt 1.1 · 10⁴ l mol^–1 cm^–1 bei 620 nm. Kalibrierungskurven verlaufen bis zu 17 µg Pd cm^–3 linear. Der optimale Konzentrationsbereich (Ringbom-Plot) liegt zwischen 3 und 14.5 µg cm^–3. Spektroskopische Untersuchungen der Reaktion in Lösungen, entweder mit equimolaren Konzentrationen oder mit einem Überschuß an einer Komponente impH-Bereich 0.3–6.5, lassen Rückschlüsse auf mögliche Komplex-Übergänge in Lösung zu. Es wurde eine vollständige graphische, logarithmische Analyse der Absorptions-pH-Graphen durchgeführt, um die Komplexgleichgewichte in Lösung aufzuklären und zu charakterisieren. Unter den Optimalbedingungen kann Palladium als nichtgeladener Komplex Pd(AMHA)₂ in Gegenwart einer großen Anzahl an Fremd-Ionen bestimmt werden. Schwierigkeiten mit Zirkonium(IV) konnte durch Maskierung mit Fluorid-Ionen umgangen werden.

     

Highly selective and sensitive copper membrane electrode based on a new synthesized Schiff base

Bis(2-hydroxyacetophenone)butane-2,3-dihydrazone (BHAB) was used as new N-N Schiffs base which plays the role of an excellent ion carrier in the construction of a Cu(II) membrane sensor. The best performance was obtained with a membrane composition of 30% poly(vinyl chloride), 55% o-nitrophenyloctyl ether (NPOE), 7% BHAB and 8% oleic acid (OA). This sensor shows very good selectivity and sensitivity towards copper ion over a wide variety of cations, including alkali, alkaline earth, transition and heavy metal ions. The effect of membrane composition and pH and influence of additive anionic on the response properties of electrode were investigated. The electrode exhibits a Nernstian behavior (with slope of 29.6 mV per decade) over a very wide concentration range (5.0 × 10⁻⁸ to 1.0 × 10⁻² mol L⁻¹) with a detection limit of 3.0 × 10⁻⁸ mol L⁻¹ (2.56 ng mL⁻¹). It shows relatively fast response time, in whole concentration range (<15 s), and can be used for at least 12 weeks in the pH range of 2.8-5.8. The proposed sensor was successfully used to determination of copper in different water samples and as indicator electrode in potentiometric titration of copper ion with EDTA.     

All-solid-state Fluoride Ion-selective Electrode using LaF3 Single Crystal with Poly(3,4-ethylenedioxythiophene) as Solid Contact Layer

An all-solid-state fluoride ion-selective electrode (ISE) was prepared using LaF₃ single crystal with poly(3,4-ethylenedioxythiophene (PEDOT) as the solid contact layer. In contrast to polymer-based ISEs, crystalline membrane-based ISEs have not been used for all-solid-state device, thereby prohibiting the integration of ISEs on a chip. The all-solid-state fluoride ISE developed in this study exhibited superior sensitivity (−56.0±0.9 mV/dec) and selectivity compared to those of conventional inner filling solution ISE. The effects of PEDOT as a solid contact layer were analyzed using chronopotentiometry and electrochemical impedance spectroscopy, which revealed that PEDOT promoted electrode stability. The all-solid-state device can miniaturize the fluoride ISE and facilitate environmental, industrial, agricultural, and physiological monitoring.     

Synthesis and characterization of CuO nanoparticles utilizing waste fish scale and exploitation of XRD peak profile analysis for approximating the structural parameters

In this research, we strived to utilize waste fish scale (labeo rohita) for synthesizing CuO nano-particles (CuO NPs), which gained much attention due to its distinctive properties and versatile applications. Upon the heat treatment, the collagen content of the fish scale got transformed into gelatin which in turn converted the precursor material into CuO NPs. The X-Ray diffraction (XRD) analysis confirmed the formation of CuO NPs and revealed the structure to be of monoclinic lattice. The structural parameters i.e. crystallite size, lattice parameters, microstrain, dislocation density was evaluated for the synthesized CuO NPs using the XRD data. Scherrer’s Method (SM), Scherrer Equation Average Method (SEAM), Linear Straight Line Method (LSLM), Straight Line Passing the Origin Method (SLPOM), Monshi Scherrer Method (MSM), Williamson-Hall Method (WHM), Size-Strain Plot Method (SSPM), Halder-Wagner Method (HWM) was exploited for the estimation of crystallite size. According to the calculations, the crystallite size was found to be 87 nm, 41 nm, 1980 nm, 62 nm, 66 nm, 28 nm, 13 nm, 13 nm respectively and the dislocation density was found to be 1.32 × 10^-4, 5.95 × 10^-4, 0.002 × 10^-4, 2.60 × 10^-4, 2.29 × 10^-4, 12.75 × 10^-4, 59.17 × 10^-4 and 59.17 × 10^-4 respectively. UV–Vis absorption analysis also confirmed the formation of CuO NPs based on the absorption peak at 262 nm (λ_max) and Tauc Plot method was used to calculate the optical band gap which was 3.84 eV. Functional group, especially the Cu-O bonding was confirmed by the Attenuated Total Reflectance-Fourier Transform Infrared Spectroscopy (ATR-FTIR) data. Field Emission Scanning Electron Microscopy (FESEM) showed three different shapes of CuO NPs which was also confirmed by Transmission Electron Microscopy (TEM). Particle size was determined based on FESEM and TEM image using imageJ software and also by the Dynamic Light Scattering (DLS) technique. Thermal analysis showed a four stage weight loss in case of Thermogravimetric (TGA) analysis and three conversion steps was observed in Differential Scanning Calorimetric (DSC) analysis. Such synthesis pathway is evidently green and facile for synthesizing CuO NPs with potentiality of various applications and also utilization of waste fish scale is a perquisite.     

A novel chemically modified carbon paste electrode based on a new mercury(II) complex for selective potentiometric determination of bromide ion

A new modified carbon paste electrode based on a recently synthesized mercury (II) complex of a pyridine containing proton transfer compound as a suitable carrier for Br⁻ ion is described. The electrode has a linear dynamic range between 3.00×10⁻² and 1.0×10⁻⁵ M with a near-Nernastian slope of 61.0±0.9 mV per decade and a detection limit of 4.0×10⁻⁶ M (0.32 ppm). The potentiometric response is independent of the pH of the solution in the pH range 4.0–8.3. The electrode possesses the advantages of low resistance, fast response and good over a variety of other anions. It was applied as an indicator electrode in potentiometric titration of bromide ions and for the recovery of Br⁻ from tap water.     

Studies on the mixed-ligand complexes of copper(II) with gallic acid and pyridine carboxylic acids and their benzologues

Summary The ternary complex formation of copper(II) with gallic acid (gal) and 2-hydroxy nicotinic acid (hyna), 2-mercapto nicotinic acid (mena), salicylic acid (sa) or thiosalicylic acid (tsa) as a second ligand in a 1:1:1 molar ratio has been investigated in 40% (v/v) ethanol using spectrophotometric andpH titration methods. The solution equilibria of the ternary systems have been determined and the stability constants of the mixed complexes has been evaluated. Considering all parameters, the Cu-gal-sa ternary system was proved as a suitable, rapid, and sensitive spectrophotometric indicator for determining traces of copper.The ternary system containingsa obeysBeer's law up to 3.4 µg·ml^–1 copper. The optimum range for the determination of copper (Ringbom) atpH 6.0 ranges from 0.63 to 1.74 µg·ml^–1 of copper. The molar absorptivity of the ternary complex is 1.3×10⁴l·mol^–1·cm^–1.

---

Untersuchungen anmixed-ligand — Komplexen von Kupfer(II) mit 3,4,5-Trihydroxybenzoesäure und Pyridincarbonsäuren und ihren C-Homologen

Zusammenfassung Die Bildung ternärer Komplexe von Kupfer(II) mit 3,4,5-Trihydroxybenzoesäure (gal) und 2-Hydroxynicotinsäure (hyna), 2-Mercaptonicotinsäure (mena), Salicylsäure (sa) oder Thiosalicylsäure (tsa) in einem molaren Verhältnis von 1:1:1 wurde mittels spektrophotometrischer und potentiometrischer Methoden in 40% (v/v) Ethanol untersucht. Die Lösungsgleichgewichte der termären Systeme und die Stabilitätskonstanten der gemischten Komplexe wurden bestimmt. Unter Berücksichtigung aller Parameter erwies sich das termäre System Cu-gal-sa als geeigneter schneller und empfindlicher Indikator zur Spurenanalyse von Kupfer.Dassa enthaltende ternäre System gehorcht demBeerschen Gesetz bis zu einer Kupferkonzentration von 3.4 µg·ml^–1. Der optimale Bereich zur Bestimmung von Kupfer (Ringbom) beipH 6.0 erstreckt sich von 0.63 bis 1.74 µg Cu pro ml. Die molare Extinktion des ternären Komplexes beträgt 1.3×10⁴l·mol·cm^–1.

     

聚丙烯酸钠配合-超滤分离Hg(Ⅱ)、Cu(Ⅱ)和Cd(Ⅱ)

以聚丙烯酸钠为配合剂,研究了Hg(Ⅱ)、Cu(Ⅱ)和Cd(Ⅱ)混合溶液配合-超滤分离行为。考察了pH值和负载比LR对混合体系分离的影响,结果表明,pH=5适宜分离;当LR从0.01增大至2时,金属离子分离系数SHg-Cd和SHg-Cu逐渐增大,LR=2时达到最大值。在pH=5、LR=2、体积浓缩因子为15和各金属离子的初始质量浓度为30mg/L时,截留液中金属离子的质量浓度ρr,Hg、ρr,Cu和ρr,Cd分别为435.3、42.6和34.2mg/L;SHg-Cd、SHg-Cu和SCu-Cd基本不变,依次为229.3、184.3和1.2,即Hg(Ⅱ)得到选择性浓缩。浓缩液的洗涤研究结果表明,随着洗涤液体积增大,ρr,Hg基本不变,ρr,Cu和ρr,Cd分别下降至12.54和4.73mg/L。收集含Cu(Ⅱ)和Cd(Ⅱ)的各渗透液,调节LR=0.033和pH=5,浓缩16倍时,ρr,Cu从27.34mg/L升高至430.9mg/L,ρr,Cd从27.83mg/L仅升高至61.5mg/L,SCu-Cd为95.8,Cu(Ⅱ)获得选择性浓缩。     

Potentiometric studies on the complexation of copper(II) by phenolic acids as discrete ligand models of humic substances

Studies on the complexation of copper(II) by phenolic acids, as ligand models of humic substances were done by potentiometry. The acids under study were: 3,4-dihydroxyhydrocinnamic acid or hydrocaffeic acid (1), 3,4-dihydroxyphenylacetic acid (2) and 3,4-dihydroxybenzoic acid or protocatechuic acid (3). Acidity constants of the ligands and the formation constants of metal-ligand complexes were evaluated by computer programs. The carboxylic group of the phenolic acids has different pK_a1 values, being the dissociation constants intrinsically related with the distance between the function and the aromatic nucleus. The results obtained allow concluding that acidity constants of the catechol moiety of the compounds are similar with pK_a2 and pK_a3 values between 9.47-9.41 and 11.55-11.70. The complexation properties of the three ligands towards copper(II) ion are quite similar, being the species found not different either in nature or stability. Although the model ligands have some structural differences no significant differences were found in their complexation properties towards copper(II). So, it can be postulated that complexation process is intrinsically related with the presence of a catechol group.     

New and novel organic-inorganic type crystalline ‘polypyrrolel/polyantimonic acid’ composite system: preparation, characterization and analytical applications as a cation-exchange material and Hg(II) ion-selective membrane electrode

A new phase of ‘organic-inorganic’ composite system, polypyrrole polyantimonic acid, prepared by mixing the inorganic precipitate of hydrated antimony oxide with organic conducting polymer i.e., polypyrrole, providing a novel granular form hybrid cation-exchanger suitable for column operation with better chemical and thermal stability, good ion-exchange capacity, reproducibility and selectivity for heavy metals. The physicochemical properties of this material were studied using elemental analyses, AAS, SEM, XRD, FTIR and simultaneous TGA-DTA studies. Ion-exchange capacity, pH-titrations, elution and distribution behavior were also carried out to characterize the material. Distribution studies revealed the cation-exchange material to be highly selective for Hg(II) and its selectivity was performed by achieving some important binary separations like Hg²⁺-Zn²⁺, Hg²⁺-Ni²⁺, Hg²⁺-Cu²⁺, Hg²⁺-Fe³⁺, Hg²⁺-Cd²⁺, Hg²⁺-Mg²⁺ etc. on its column. Using this electroactive composite material, a new heterogeneous precipitate based selective ion-sensitive membrane electrode was fabricated for the determination of Hg(II) ions in solutions. The membrane electrode is mechanically stable, with a quick response time, and can be operated within a wide pH range. The selectivity coefficients for different cations determined by mixed solution method were found to be less than unity The electrode was also found to be satisfactory in electrometric titrations.     

Influence of Mg^2＋ on Initial Stages of CaCO3 Scale Formed on Metal Surface

Magnesium ions, which exist in formation water and injection water under downhole conditions in the oil and gas production industry, are a key determinant in the CaCO3 scale formation. Many studies have focused their attention on the effect of magnesium on the kinetics, the morphology and the content of Mg in the Ca-CO3 scale. Little attention has been paid to the effect of Mg^2 on the initial stages of CaCO3 formation on a metal surface. In this study, an electrochemical technique was used to study the influence of Mg^2 on the ini-tial stages of CaCO3 scale formed on a metal surface. With this electrochemical technique, the reduction of the dissolved oxygen in an analysis solution is considered on the surface of a rotating disk electrode (RDE) un-der potentiostatic control. The rate of oxygen reduction on the surface of the RDE enables the extent of sur-face coverage of scale to be assessed. With this electrochemical technique, a new insight into the effect of Mg^2 on CaCO3 scale formed on a metal surface is given.     

Lead(II) ion-selective electrode based on polyaminoanthraquinone particles with intrinsic conductivity

A new polyvinylchloride membrane electrode was facilely prepared by using polyaminoanthraquinone (PAAQ) microparticles with an intrinsically electrical conductivity as a lead(II) ionophore. It is found that the electrode performance will significantly be improved with adding 1 wt% PAAQ microparticles and decreasing the membrane thickness. A 90 μm-thick membrane electrode consisting of PAAQ(salt):polyvinyl chloride:dioctylphthalate:sodium tetraphenylborate of 1:33:66:1 (wt) but without any traditional lead(II) ionophore achieved the optimal performance and exhibited a good Nernstian response for Pb(II) ions over a wide concentration range from 2.5 × 10⁻⁶ to 0.1 M with a slope of 28.9 mV/decade and a detection limit down to 776 nM. A reasonably short response time of 12 s was revealed together with a long lifetime over a period of around 4 months in a wide pH range between 2.8 and 5.2. A fixed interference method indicated that the electrode has an excellent selectivity for lead(II) ion over alkali, alkaline earth and other heavy metal ions. The proposed electrode has been also found to be a powerful indicator electrode for potentiometric titration of Pb(II) ions with EDTA. The electrode can be used to accurately monitor the Pb(II) pollution in environmental waters.     

Effect of Positions of Methyl Substituents in the Complexation Kinetics of Macrocyclic Tetraamines with Copper(II) in Strongly Basic Aqueous Media

The complexation kinetics of the reaction of copper(II) with isomeric tetraamine macrocyclic ligands, C-rac-5, 7, 7, 12, 12, 14-hexamethyl-l, 4, 8, 11-tetraazacyclotetradecane (tet c), C-meso-5, 7, 7, 12, 12, 14-hexamethyl-l, 4, 8, 11-tetraazacyclotetradecane (tet d), and C-meso-5, 5, 7, 12, 12, 14-hexamethyl-1, 4, 8, 11-tetraazacyclotetradecane (tet a) in strongly basic aqueous media have been examined at 25.0 ± 0.1°C by means of the stopped-flow technique. The variation in the values of the resulting rate constants indicates that the positions of the methyl substituents play a significant role in these reactions. These reactions exhibit associative character and second-bond formation is proposed as the rate-determining step.     

Voltammetric Determination of Rutin Using a Carbon Composite Electrode Modified with Copper(II)-Resin

Abstract

The preparation and electrochemical characterization of a carbon composite electrode modified with copper(II)-resin as well as its behavior toward rutin were investigated using cyclic and linear sweep voltammetry. The best voltammetric response was observed for a composite composition of 20% (m/m) copper(II)-resin, 0.10 mol L^?1 KNO₃/10^?6 mol L^?1 HNO₃ solution (pH 6.0) as the supporting electrolyte, and a scan rate of 50 mVs^?1. A linear voltammetric response for rutin was obtained in the concentration range from 9.90 × 10^?7 to 8.07 × 10^?6 mol L^?1, with a detection limit of 2.65 × 10^?8 mol L^?1. The proposed electrode was useful for the quality control and routine analysis of rutin in pharmaceutical formulations.     

Al(III)-selective electrode based on newly synthesized xanthone derivative as neutral ionophore

The suitability of a xanthone derivative, 1-hydroxy-3-methyl-9H-xanthen-9-one (HMX) as a neutral ionophore for the preparation of a polyvinylchloride (PVC) membrane electrode for aluminum(III) ions was investigated. The prepared electrode exhibits a Nernstian response for Al³⁺ ions over a wide concentration range (1.0 × 10⁻⁶ to 1.6 × 10⁻¹ M) with a limit of detection 6.0 × 10⁻⁷ M. It has a relatively fast response time and can be used for at least three months without any considerable divergence in potentials. The proposed membrane electrode revealed very good selectivity for Al³⁺ ions over a wide variety of other cations and could be used at a working pH range of 3.0-8.5. It was used as an indicator electrode in potentiometric titration of aluminum ions with EDTA and in the determination of Al³⁺ in different real samples.