Immunosensor for electrodetection of the C-reactive protein in serum

Epidemiological studies have demonstrated an association between the risk of cardiovascular events and increasing C-reactive protein (CRP) concentration. This paper reports the development of an immunosensor for the assessment of the cardiovascular process using anti-C-reactive protein antibody immobilized onto a gold-printed screen electrode. Positive and negative human sera were successfully evaluated using electrochemical impedance spectroscopy (EIS), differential pulse voltammetry (DPV), and atomic force microscopy (AFM). EIS results show that, after the incubation with positive serum for myocardial infarction, the resistance increased about two times in relation to the negative serum. A linear range from 6.25 to 50 μg mL^?1 and detection limit of 0.78 μg mL^?1 using DPV were obtained. The immunosensor developed for the CRP detection using gold electrode revealed efficacy and a potential use for the diagnosis and monitoring of the progression of cardiovascular diseases.     

An impedimetric immunosensor for the detection of autoantibodies directed against gliadins

An immunosensor has been developed for the detection of autoantibodies directed against wheat gliadin, a protein fraction of cereal gluten which is involved in celiac disease. The immunosensor is based on the immobilization of gliadins onto gold electrodes covered with a polyelectrolyte layer of poly(4-styrenesulfonic acid sodium salt). The immobilization was monitored by quartz crystal microbalance (QCM) analysis. The antigen-antibody interaction signal was amplified by an incubation step with peroxidase-labeled immunoglobulins and subsequent peroxidase-catalyzed oxidation of 3-amino-9-ethylcarbazole (AEC). Changes in the insulating properties of the electrode layer were measured by electrochemical impedance spectroscopy (EIS) in the presence of ferri/ferro-cyanide. Impedance spectra could be fitted to a Randles equivalent circuit with high accuracy. Exposing the sensor electrodes to various antigliadin antibody concentrations resulted in proportional changes in the charge transfer resistance. A calibration graph for the detection of antigliadin antibodies was established for antibody concentrations between 10(-8) and 10(-6) M. Finally, the sensor was used for the determination of antigliadin autoantibodies of the IgG and IgA type in several human sera.     

An electrochemical impedance immunoanalytical method for detecting immunological interaction of human mammary tumor associated glycoprotein and its monoclonal antibody

An electrochemical impedance immunosensor has been developed for the specific detection of immunological interaction between human mammary tumor associated glycoprotein and its monoclonal antibody (GP1D8). Antibody proteins were immobilized by spontaneous adsorption of antibody on gold. Consequently, electrochemical impedance spectroscopy (EIS) measurements of a gold electrode coated with the antibody showed changes in a.c. current response after the addition of the specific antigen. The successful immunological reaction between the immobilized antibody–antigen at the electrode surface could be monitored.     

An Electrochemical Impedance Immunosensor Based on Gold Nanoparticle‐Modified Electrodes for the Detection of HbA1c in Human Blood

A label‐free immunosensor for the detection of HbA1c was developed based on gold nanoparticle (AuNP)‐aryl diazonium salt modified glassy carbon (GC) electrode where transduction is achieved using electrochemical impedance spectroscopy (EIS). GC electrodes were first modified with 4‐aminophenyl (Ph‐NH₂) layers to which AuNPs were attached. Thereafter an oligo(ethylene glycol) (OEG‐COOH) species were covalently attached to the remaining free amine groups on the Ph‐NH₂ surface. The AuNP surfaces were further modified with Ph‐NH₂ followed by attachment of a glycosylated pentapeptide (GPP), an analogon to HbA1c. Exposure of this interface to anti‐HbA1c IgG resulted in a change in charge transfer resistance (R_ct) due to the anti‐HbA1c IgG selectively complexing to the surface bound GPP. To detect the amount of HbA1c, a competitive inhibition assay was employed where the surface bound GPP and HbA1c in solution compete for the anti‐HbA1c IgG antibodies. The higher the concentration of HbA1c, the less antibody binds to the sensing interface and the lower the change of R_ct. The response of the immunosensor is linear with the HbA1c% of total haemoglobin in the range of 0%–23.3%. This competitive inhibition assay can be used for the detection of HbA1c in human blood. The performance of the immunosensor for detection of HbA1c in human blood is comparable to the clinical laboratory method.     

Ferrocenyl-doped silica nanoparticles as an immobilized affinity support for electrochemical immunoassay of cancer antigen 15-3

The aim of this study is to elaborate a simple and sensitive electrochemical immunoassay using ferrocenecarboxylic (Fc-COOH)-doped silica nanoparticles (SNPs) as an immobilized affinity support for cancer antigen 15-3 (CA 15-3) detection. The Fc-COOH-doped SNPs with redox-active were prepared by using a water-in-oil microemulsion method. The use of colloidal silica could prevent the leakage of Fc-COOH and were easily modified with trialkoxysilane reagents for covalent conjugation of CA 15-3 antibodies (anti-CA 15-3). The Fc-COOH-doped SNPs were characterized by X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM). The fabrication process of the electrochemical immunosensor was demonstrated by using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) techniques. Under optimal conditions, the developed immunosensor showed good linearity at the studied concentration range of 2.0-240 U mL⁻¹ with a coefficient 0.9986 and a detection limit of 0.64 U mL⁻¹ at S/N = 3.     

Sensitivity improvement of a sandwich-type ELISA immunosensor for the detection of different prostate-specific antigen isoforms in human serum using electrochemical impedance spectroscopy and an ordered and hierarchically organized interfacial supramolecular architecture

A gold millielectrode (GME) functionalized with a mixed (16-MHA + EG₃SH) self-assembled monolayer (SAM) was used to fabricate an indirect enzyme-linked immunosorbent assay (ELISA) immunosensor for the sensitive detection of prostate-specific antigen (PSA), a prostate cancer (PCa) biomarker, in human serum samples. To address and minimize the issue of non-specific protein adsorption, an organic matrix (amine-PEG₃-biotin/avidin) was assembled on the previously functionalized electrode surface to build up an ordered and hierarchically organized interfacial supramolecular architecture: Au/16-MHA/EG₃SH/amine-PEG₃-biotin/avidin. The electrode was then exposed to serum samples at different concentrations of a sandwich-type immunocomplex molecule (^BtnAb-Ag_PSA-^HRPAb), and its interfacial properties were characterized using electrochemical impedance spectroscopy (EIS). Calibration curves for polarization resistance (R_P) and capacitance (1/C) vs. total and free PSA concentrations were obtained and their analytical quality parameters were determined. This approach was compared with results obtained from a commercially available ELISA immunosensor. The results obtained in this work showed that the proposed immunosensor can be successfully applied to analyze serum samples of patients representative of the Mexican population.     

Amperometric Immunosensor Based on L-Cysteine/Gold Colloidal Nanoparticles for Carbofuran Detection

In this study, anti-carbofuran monoclonal antibodies (Ab) were immobilized onto a gold electrode surface modified with multilayers of L-cysteine and gold colloidal nanoparticles (GNPs). Furthermore, horseradish peroxidase (HRP) as enzyme membrane was used for blocking unspecific sites and amplifying signal. The conformational properties of the immunosensor were characterized using electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The concentration of antibody solution, pH of working buffer and incubation time were studied in detail for optimization of analytical performance. Under optimal conditions, the variation of current response was proportional to the concentration of carbofuran which ranged from 0.01 ng/mL to 50 ng/mL with a correlation coefficient of 0.9912. The detection limit was 0.01 ng/mL (S/N = 3). The proposed immunosensor exhibited good reproducibility and stability and it can be used for the rapid detection of carbofuran pesticide.     

One step electrochemically deposited nanocomposite film of chitosan-carbon nanotubes-gold nanoparticles for carcinoembryonic antigen immunosensor application

A simple and controllable one-step electrodeposition method for the preparation of a chitosan-carbon nanotubes-gold nanoparticles (CS-CNTs-GNPs) nanocomposite film was used to fabricate an immunosensor for detection of carcinoembryonic antigen (CEA). The porous three-dimensional CS-CNTs-GNPs nanocomposite film, which offered a large specific surface area for immobilization of antibodies, exhibited improved conductivity, high stability and good biocompatibility. The morphology of the formed nanocomposite film was investigated by scanning electron microscopy (SEM), and the electrochemical behaviors of the immunosensor were characterized by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). Under the optimal conditions, the proposed immunosensor could detect CEA in two linear ranges from 0.1 to 2.0 ng mL⁻¹ and from 2.0 to 200.0 ng mL⁻¹, with a detection limit of 0.04 ng mL⁻¹. The immunosensor based on CS-CNTs-GNPs nanocomposite film as the antibody immobilization matrix could exhibit good sensitivity, stability, and reproducibility for the determination of CEA.     

An ultrasensitive electrochemical immunosensor for CA72-4 based on a signal amplification strategy of MoS2 nanoflower-supported Au nanoparticles

Accurate detection of cancer antigen 72-4 (CA72-4), a tumor-associated glycoprotein, is of great significance for gastric cancer diagnosis and immunotherapy monitoring. Modification of noble metal nanoparticles on transition metal dichalcogenides can significantly enhance functions, such as electron transport. Molybdenum disulfide gold nanoparticles nanocomposites (MoS₂-Au NPs) were prepared in this study and a series of characterization studies were carried out. In addition, a label-free, highly sensitive electrochemical immunosensor molybdenum disulfide -Au nanoparticles/Glassy carbon electrode (MoS₂-Au NPs/GCE) was also prepared and used for the detection of CA72-4. The electrochemical performance of the immunosensor was characterized by electrochemical techniques, such as cyclic voltammetry (CV), differential pulse voltammetry (DPV), and electrochemical impedance spectroscopy (EIS). The results indicated that better MoS₂-Au NPs nanomaterials have been synthesized, and the prepared electrochemical immunosensor, MoS₂-Au NPs/GCE, showed excellent electrochemical performance. The sensor exhibited high detection sensitivity under optimal conditions, including an incubation time of 30 min, an incubation temperature of 25 °C, and a pH of 7.0. The electrochemical immunosensor also had a low detection limit of 2.0 × 10^?5 U/mL (S/N = 3) in a concentration range of 0.001–200 U/mL, with good selectivity, stability, and repeatability. In conclusion, this study provided a theoretical basis for the highly sensitive detection of tumor markers in clinical biological samples.     

A Dendrimer Supported Electrochemical Immunosensor for the Detection of Alpha‐feto protein – a Cancer Biomarker

The electrochemical detection of alpha‐feto protein based on novel gold nanoparticles‐ poly(propylene imine) dendrimer platform is reported. The platform was prepared by co‐electrodeposition of gold nanoparticles and generation 3 poly (propylene imine) dendrimer on a glassy carbon electrode. Each modifying step was characterised by cyclic voltammetry and electrochemical impedance spectroscopy. The electrochemical measurements showed that the platform was stable, conducting and exhibited reversible electrochemistry. Results obtained from the electrochemical impedance spectroscopy interrogation in [Fe(CN)₆^3−/4−] redox probe showed a marked reduction in charge transfer resistance (R_ct) after each modification step. The immunosensor was prepared by immobilisation of a probe anti‐alpha feto protein (AFP) on the platform for 3 hrs at 35 °C followed by blocking the surface with bovine serum albumin to minimise non‐specific binding. The prepared immunosensor was used to detect AFP over a wide concentration range from 0.005 to 500 ng/mL and detection limits of 0.0022 and 0.00185 ng/mL were obtained for SWV and EIS measurements respectively. The immunosensor gave good stability over a period of fourteen days when stored at 4 °C.     

Label-free capacitive immunosensor based on quartz crystal Au electrode for rapid and sensitive detection of Escherichia coli O157:H7

A label-free capacitive immunosensor based on quartz crystal Au electrode was developed for rapid and sensitive detection of Escherichia coli O157:H7. The immunosensor was fabricated by immobilizing affinity-purified anti-E. coli O157:H7 antibodies onto self-assembled monolayers (SAMs) of 3-mercaptopropionic acid (MPA) on the surface of a quartz crystal Au electrode. Bacteria suspended in solution became attached to the immobilized antibodies when the immunosensor was tested in liquid samples. The change in capacitance caused by the bacteria was directly measured by an electrochemical detector. An equivalent circuit was introduced to simulate the capacitive immunosensor. The immunosensor was evaluated for E. coli O157:H7 detection in pure culture and inoculated food samples. The experimental results indicated that the capacitance change was linearly correlated with the cell concentration of E. coli O157:H7. The immunosensor was able to discriminate between cellular concentrations of 10²–10⁵ cfu mL⁻¹ and has applications in detecting pathogens in food samples. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were also employed to characterize the stepwise assembly of the immunosensor.     

Antibody-functionalized magnetic nanoparticles for the detection of carcinoembryonic antigen using a flow-injection electrochemical device

A magnetocontrolled immunosensing strategy based on flow-injection electrochemical impedance spectroscopy (EIS) was developed for the determination of carcinoembryonic antigen (CEA) in human serum. The immunosensor was fabricated by immobilizing anti-CEA on epoxysilane-modified core–shell magnetic Fe₃O₄/SiO₂ nanoparticles. The detection principle is based on the difference between the resistances measured before and after the antigen–antibody interaction. The performance of the immunosensor and factors influencing this performance were also proposed. The resistance response depended linearly on the CEA concentration over the range 1.5–60 ng/ml, and the immunosensor gave a detection limit of 0.5 ng/ml (S/N = 3). Coefficients of variance (CVs) of <9.8% were obtained for the intra- and interassay precisions. The method was successfully applied to the analysis of CEA in human serum. The recoveries obtained by spiking CEA standards into normal serum were 87–113%. The performance of the immunosensor was compared with a commercially available CEA ELISA. Satisfactory results were obtained according to a paired t-test method (t value < t _critical at the 95% confidence level). Importantly, the proposed immobilization protocol could be further developed to immobilize other antigens or biocompounds. Figure This study introduced a magnetocontrolled electrochemical immunosensing strategy based on antibody-functionalized magnetic core–shell Fe₃O₄/SiO₂ nanoparticles for the determination of carcinoembryonic antigen in human serum     

A Highly Sensitive Electrochemical Impedance Spectroscopy Immunosensor for Determination of 1‐Pyrenebutyric Acid Based on the Bifunctionality of Nafion/Gold Nanoparticles Composite Electrode

A simple, highly sensitive and label‐free electrochemical impedance spectroscopy (EIS) immunosensor was developed using Nafion and gold nanoparticles (nano‐Au/Nafion) composites for the determination of 1‐pyrenebutyric acid (PBA). Under the optimal conditions, the amount of immobilized antibody was significantly improved on the nano‐Au/Nafion electrode due to the synergistic effect and biocompatibility of Nafion film and gold nanoparticles composites. The results showed that the sensitivity and stability of nano‐Au/Nafion composite electrode for PBA detection were much better than those of nano‐Au modified glassy carbon electrode (nano‐Au/GCE). The plot of increased electron transfer resistances (R_ets) against the logarithm of PBA concentration is linear over the range from 0.1 to 150 ng·mL^?1 with the detection limit of 0.03 ng·mL^?1. The selectivity and accuracy of the proposed EIS immunosensor were evaluated with satisfactory results.     

Monitoring microbial populations of sulfate-reducing bacteria using an impedimetric immunosensor based on agglutination assay

An impedimetric immunosensor was fabricated for rapid and non-labeled detection of sulfate-reducing bacteria, Desulforibrio caledoiensis (SRB) by immobilizing lectin-Concanavalin A using an agglutination assay. The immobilization of lectin was conducted using amine coupling on the surface of a gold (Au) electrode assembled with 11-Mercaptoundecanoic acid. Electrochemical impedance spectroscopy (EIS) was used to verify the stepwise assembly of the sensor system. The work conditions of the impedimetric immunosensor, such as pH of the buffer solutions and the incubation time of lectin, were optimized. Faradic impedance spectra for charge transfer for the redox probe Fe(CN)₆^3−/4−were measured to determine SRB concentrations. The diameter of the Nyquist diagram that is equal to the charge-transfer resistance (R_ct) increased with increasing SRB concentration. A linear relationship between R_ct and SRB concentration was obtained in SRB concentration range of 1.8 to 1.8 × 10⁷ cfu/ml. The variation of the SRB population during the growth process was also monitored using the impedimetric immunosensor. This approach has great potential for simple, low-cost, and time-saving monitoring of microbial populations.     

A reusable capacitive immunosensor for detection of Salmonella spp. based on grafted ethylene diamine and self-assembled gold nanoparticle monolayers

Fabrication of a novel capacitive immunosensor based on grafted ethylene diamine and self-assembled gold nanoparticle monolayer on glassy carbon electrode for the detection of Salmonella spp. is described for the first time. In the present study, the Salmonella spp. monoclonal antibodies (denoted as McAbs) was immobilized on gold nanoparticles. Interaction of McAbs and Salmonella spp. was detected directly using the electrochemical impedance spectroscopy (EIS) technique. The experimental results showed that the concentration of antigen was measured through the relative change in capacitance in the corresponding specific binding of Salmonella spp. and McAbs. Under the optimized conditions, the relative changes in capacitance were proportional to the logarithmic values of Salmonella spp. concentrations in the range of 1.0 × 10² to 1.0 × 10⁵ CFU mL⁻¹ (r = 0.991) with the detection limit of 1.0 × 10² CFU mL⁻¹. The stability of proposed immunosensor could be estimated by determining the relative change in capacitance, which remained almost the same in two months and decreased gradually to 85.3% of initial value after four months’ storage. The used immunosensor could be regenerated repeatedly by immersing in glycine-HCl buffer solution (pH 2.8). Finally, the proposed immunosensor was successfully used for the detection of Salmonella spp. in lab-processed commercial pork samples.     

Capacitance Polypyrrole‐based Impedimetric Immunosensor for Interleukin‐10 Cytokine Detection

In the present study, we developed a novel label‐free capacitance impedimetric immunosensor based on the immobilization of the human monoclonal antibody anti‐interleukin‐10 (anti‐IL‐10 mAb) onto polypyrrole (PPy)‐modified silicon nitride (Si₃N₄) substrates. The immunosensor was used for the detection of the recombinant interleukin‐10 antigen (rh IL‐10) that may be secreted in patients at the early stage of inflammation. The immunosensor was created by chemical deposition of PPy conducting layer on pyrrole?silane (SPy)‐treated Si/SiO₂/Si₃N₄ substrates (Si/SiO₂/Si₃N₄?SPy), followed by anti‐IL‐10 mAb immobilization through carboxyl‐functionalized diazonium (CMA) protocol and carbodiimide chemistry. The surface characterization and the biofunctionalization steps were characterized by SEM, FTIR and cyclic voltammetry (CV) while the detection process was carried out by using electrochemical impedance spectroscopy (EIS) analyses. The created immunosensor showed two linear fittings (R²=0.999) for the detection of rh IL‐10 within the concentration range from 1–50 pg/mL. It exhibited high sensitivity (0.1128 (pg/mL)^?1) with a very low limit of detection (LOD)=0.347 pg/mL, more particularly, at the low concentration range (1–10 pg/mL). Thus, this developed polypyrrole‐based immunosensor represents a promising strategy for creation of miniaturized label‐free, fast and highly sensitive biosensors for diagnosis of inflammation biomarkers at very low concentrations with reduced cost.     

Multi-wall carbon nanotubes (MWCNTs)-doped polypyrrole DNA biosensor for label-free detection of genetically modified organisms by QCM and EIS

In this paper, we describe DNA electrochemical detection for genetically modified organism (GMO) based on multi-wall carbon nanotubes (MWCNTs)-doped polypyrrole (PPy). DNA hybridization is studied by quartz crystal microbalance (QCM) and electrochemical impedance spectroscopy (EIS). An increase in DNA complementary target concentration results in a decrease in the faradic charge transfer resistance (R_ct) and signifying “signal-on” behavior of MWCNTs-PPy-DNA system. QCM and EIS data indicated that the electroanalytical MWCNTs-PPy films were highly sensitive (as low as 4 pM of target can be detected with QCM technique). In principle, this system can be suitable not only for DNA but also for protein biosensor construction.     

Amperometric immunosensors based on layer-by-layer assembly of gold nanoparticles and methylene blue on thiourea modified glassy carbon electrode for determination of human chorionic gonadotrophin

Nano-Au and methylene blue (MB) were assembled layer-by-layer (LBL) into films on the glassy carbon electrode modified by thiourea for detection of human chorionic gonadotrophin (HCG). The electrode modification process was characterized by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and scanning electron micrograph (SEM). The factors influencing the performance of the amperometric immunosensor were studied in detail. Tests performed with this immunosensor showed good linearity, the working range for the system was 1.0–100.0 mIU/mL with a detection limit of 0.3 mIU/mL at 3σ. Moreover, the studied immunosensor exhibited high sensitivity and long-term stability. The present work supplied a promising test method for clinical immunoassay.     

Modelling of the impedimetric responses of an aflatoxin B1 immunosensor prepared on an electrosynthetic polyaniline platform

Aflatoxins are a group of mycotoxins that have deleterious effects on humans and are produced during fungal infection of plants or plant products. An electrochemical immunosensor for the determination of aflatoxin B₁ (AFB₁) was developed with AFB₁antibody (AFB₁-Ab) immobilized on Pt electrodes modified with polyaniline (PANi) and polystyrene sulphonic acid (PSSA). Impedimetric analysis shows that the electron transfer resistances of the Pt/PANi–PSSA electrode, the Pt/PANi–PSSA/AFB₁-Ab immunosensor and Pt/PANi–PSSA/AFB₁-Ab incubated in bovine serum albumin (BSA) were 0.458, 720 and 1,066 kΩ, respectively. These results indicate that electrochemical impedance spectroscopy (EIS) is a suitable method for monitoring the change in electron transfer resistance associated with the immobilization of the antibody. Modelling of EIS data gave equivalent circuits which showed that the electron transfer resistance increased from 0.458 kΩ for the Pt/PANi–PSSA electrode to 1,066 kΩ for the Pt/PANi–PSSA/AFB₁-Ab immunosensor, indicating that immobilization of the antibody and incubation in BSA introduced an electron transfer barrier. The AFB₁ immunosensor had a detection limit of 0.1 mg/L and a sensitivity of 869.6 kΩ L/mg.     

Development of proof of concept for prostate cancer detection: an electrochemical immunosensor based on fullerene-C60 and copper nanoparticles composite film as diagnostic tool

Screening of Prostate-specific antigen (PSA) in human blood is the most common approach to diagnose prostate cancer. The joint application of biology and electrochemistry has shown a tremendous rise in research towards the development of electrochemical diagnostic tools for various diseases. The present study demonstrates the development of an effective immunosensing platform incorporating hydroquinone (HQ) immobilized, fullerene-C₆₀ and copper nanoparticles (CuNPs) composite film on glassy carbon electrode (HQ@CuNPs-reduced-fullerene-C₆₀/GCE) for the selective, quick and trace detection of PSA. In order to fabricate immunosensor sequential immobilization of primary antibody (Ab₁), blocking agent (bovine serum albumin (BSA)), antigen (prostate-specific antigen (PSA)) and secondary antibody (Ab₂) tagged with horseradish peroxide (HRP) was carried out on HQ@CuNPs-reduced-fullerene-C₆₀/GCE. Electrochemical characterization and the signal response of immunosensor were tested using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Due to the synergetic effect of fullerene-C₆₀ and CuNPs, the novel nanocomposite film exhibited excellent catalytic activity towards hydrogen peroxide (H₂O₂) reduction for greatly amplified immunosensing signals. HQ@CuNPs-fullerene-C₆₀/GCE exhibited a well-defined redox peak and accelerated electrochemical reduction of H₂O₂ without any interference of dissolved oxygen and false-positive result in phosphate buffer solution (PBS) at pH 7.0. The parameters influencing the electrochemical response were optimized. Under the optimized conditions, wide linearity between PSA concentrations and current responses ranging from 0.005 ng/mL to 20 ng/mL with the lower detection limit of 0.002 ng/mL was obtained at the proposed immunosensor. The clinical applicability of the proposed immunosensor was successfully tested in serum and urine samples. Results revealed that the proposed immunosensor may create new boundaries in the identification of PSA in human blood samples.