Fast high-throughput method for the determination of acidity constants by capillary electrophoresis: I. Monoprotic weak acids and bases

A new and fast method to determine acidity constants of monoprotic weak acids and bases by capillary zone electrophoresis based on the use of an internal standard (compound of similar nature and acidity constant as the analyte) has been developed. This method requires only two electrophoretic runs for the determination of an acidity constant: a first one at a pH where both analyte and internal standard are totally ionized, and a second one at another pH where both are partially ionized. Furthermore, the method is not pH dependent, so an accurate measure of the pH of the buffer solutions is not needed. The acidity constants of several phenols and amines have been measured using internal standards of known pK_a, obtaining a mean deviation of 0.05 pH units compared to the literature values.     

Iodomethane oxidative addition and CO migratory insertion in monocarbonylphosphine complexes of the type [Rh((C6H5)COCHCO((CH2)nCH3))(CO)(PPh3)]: Steric and electronic effects

The chemical kinetics, studied by UV/Vis, IR and NMR, of the oxidative addition of iodomethane to [Rh((C₆H₅)COCHCOR)(CO)(PPh₃)], with R = (CH₂)_nCH₃, n = 1-3, consists of three consecutive reaction steps that involves isomers of two distinctly different classes of Rh^III-alkyl and two distinctly different classes of Rh^III-acyl species. Kinetic studies on the first oxidative addition step of [Rh((C₆H₅)COCHCOR)(CO)(PPh₃)] + CH₃I to form [Rh((C₆H₅)COCHCOR)(CH₃)(CO)(PPh₃)(I)] revealed a second order oxidative addition rate constant approximately 500-600 times faster than that observed for the Monsanto catalyst [Rh(CO)₂I₂]⁻. The reaction rate of the first oxidative addition step in chloroform was not influenced by the increasing alkyl chain length of the R group on the β-diketonato ligand: k₁ = 0.0333 ([Rh((C₆H₅)COCHCO(CH₂CH₃))(CO)(PPh₃)]), 0.0437 ([Rh((C₆H₅)COCHCO(CH₂CH₂CH₃))(CO)(PPh₃)]) and 0.0354 dm³ mol⁻¹ s⁻¹ ([Rh((C₆H₅)COCHCO(CH₂CH₂CH₂CH₃))(CO)(PPh₃)]). The pK_a^′ and keto-enol equilibrium constant, K_c, of the β-diketones (C₆H₅)COCH₂COR, along with apparent group electronegativities, χ_R of the R group of the β-diketones (C₆H₅)COCH₂COR, give a measurement of the electron donating character of the coordinating β-diketonato ligand: (R, pK_a^′, K_c, χ_R) = (CH₃, 8.70, 12.1, 2.34), (CH₂CH₃, 9.33, 8.2, 2.31), (CH₂CH₂CH₃, 9.23, 11.5, 2.41) and (CH₂CH₂CH₂CH₃, 9.33, 11.6, 2.22).     

Effective chemoselective deprotection of 3,4-dimethoxybenzyl (DMB) ethers in the presence of benzyl and p-methoxybenzyl (PMB) ethers by phenyliodine(III) bis(trifluoroacetate) (PIFA)

In this Letter, a selective deprotection of the alcohol protecting 3,4-dimethoxybenzyl (^3,4DMB) group is described. The hypervalent iodine(III) reagent phenyliodine bis(trifluoroacetate) (PIFA) is found to be an efficient reagent for the chemoselective deprotection of ^3,4DMB ethers in the presence of benzyl, p-methoxybenzyl, methoxymethyl, tert-butyldimethylsilyl, and tert-butyldiphenylsilyl ethers under mild conditions. This is the first example of the selective deprotection of the ^3,4DMB group from a hydroxy group with PIFA.     

Determination of pKa values of tenoxicam from H NMR chemical shifts and of oxicams from electrophoretic mobilities (CZE) with the aid of programs SQUAD and HYPNMR

In this work it is explained, by the first time, the application of programs SQUAD and HYPNMR to refine equilibrium constant values through the fit of electrophoretic mobilities determined by capillary zone electrophoresis experiments, due to the mathematical isomorphism of UV-vis absorptivity coefficients, NMR chemical shifts and electrophoretic mobilities as a function of pH. Then, the pK_a values of tenoxicam in H₂O/DMSO 1:4 (v/v) have been obtained from ¹H NMR chemical shifts, as well as of oxicams in aqueous solution from electrophoretic mobilities determined by CZE, at 25 °C. These values are in very good agreement with those reported by spectrophotometric and potentiometric measurements.     

A direct fluorescence-on chemo-sensor for selective recognition of Zn(II) by a lower rim 1,3-di-derivative of calix[4]arene possessing bis-{N-(2-hydroxynaphthyl-1-methylimine)} pendants

The bis-{N-(2-hydroxynaphthyl-1-methylimine)} anchored 1,3-di-derivative of lower rim p-tert-butyl-calix[4]arene possessing a N₂O₂, N₂O₄ or N₂O₆ binding core was found to be selective for Zn(II) ions even at ?60 ppb by eliciting fluorescence-on behaviour while the other ions, viz., Ti⁴⁺, VO²⁺, Cr³⁺, Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Mg²⁺, Cd²⁺ and Hg²⁺ caused no change in the fluorescence. The reaction between 1 and Zn²⁺ was found to be stoichiometric with the formation of a 1:1 complex; while H⁺ quenched the fluorescence of the complex, OH⁻ restored it. The studies of the 1:1 isolated complexes of Zn²⁺, Ni²⁺ and Cu²⁺ augmented the results.     

A simple and facile stereoselective synthesis of (Z)- and (E)-allyl halides catalyzed by silica supported sodium hydrogen sulfate: factors influencing the yields and stereochemistry of allyl halides

A simple, mild and efficient stereoselective synthesis of (Z)- and (E)-allyl bromides and iodides has been developed by treatment of the Baylis-Hillman adducts with lithium bromide and iodide, respectively, in methylene chloride catalyzed by silica supported sodium hydrogen sulfate at room temperature. The role of various solvents, different reacting metallic halides, nature of the adducts and activity of several heterogeneous catalysts on the yields and stereochemistry of the products have been thoroughly studied.     

Hydrogen bond interactions at the TiO2 surface: Their contribution to the pH dependent photo-catalytic degradation of p-nitrophenol

We have obtained pK_a values of p-nitrophenol–TiO₂ by measuring the adsorption equilibrium constants of p-nitrophenol (PNP) on the TiO₂ surface at different pH values. These values have been obtained from Langmuir isotherms and from a plot of 1/rate vs. 1/[PNP]_o obtained during TiO₂ catalyzed solar light photo-degradation of PNP. Two limit equilibrium constants are readily obtained depending on the solution pH: at pH 5 at which the TiO₂ surface is mainly positively charged and at pH 8 when it is negatively charged. With these and other adsorption equilibrium constants and the PNP pK_a value in solution, thermodynamic cycles are established in order to obtain the PNP pK_a when it is adsorbed on positively charged, neutral and negatively charged TiO₂ surfaces. From these pK_a values useful information on the PNP–TiO₂ interaction is readily obtained. For instance, the PNP nitro group interacts with the TiO₂ surface via a hydrogen bond, arising from the complex of water molecules with the Ti⁴⁺ ions on its surface. The weaker the hydrogen bond donor, the stronger the oxygen nitro group basicity. Therefore, pK_a changes on the phenolic hydroxyl group result from these interactions. Linear free energy correlations, maximum PNP adsorption capacity values (Q_L) and FTIR ATR, spectrum support this proposal. A k_obs vs. pH degradation profile of p-nitrophenol is also provided.     

Synthesis and structural investigation of the compounds containing HF2 anions: Ca(HF2)2, Ba4F4(HF2)(PF6)3 and Pb2F2(HF2)(PF6)

Three new compounds Ca(HF₂)₂, Ba₄F₄(HF₂)(PF₆)₃ and Pb₂F₂(HF₂)(PF₆) were obtained in the system metal(II) fluoride and anhydrous HF (aHF) acidified with excessive PF₅. The obtained polymeric solids are slightly soluble in aHF and they crystallize out of their aHF solutions. Ca(HF₂)₂ was prepared by simply dissolving CaF₂ in a neutral aHF. It represents the second known compound with homoleptic HF environment of the central atom besides Ba(H₃F₄)₂. The compounds Ba₄F₄(HF₂)(PF₆)₃ and Pb₂F₂(HF₂)(PF₆) represent two additional examples of the formation of a polymeric zigzag ladder or ribbon composed of metal cation and fluoride anion (MF⁺)_n besides PbF(AsF₆), the first isolated compound with such zigzag ladder. The obtained new compounds were characterized by X-ray single crystal diffraction method and partly by Raman spectroscopy. Ba₄F₄(HF₂)(PF₆)₃ crystallizes in a triclinic space group P1¯ with a=4.5870(2) Å, b=8.8327(3) Å, c=11.2489(3) Å, α=67.758(9)°, β=84.722(12), γ=78.283(12)°, V=413.00(3) Å³ at 200 K, Z=1 and R=0.0588. Pb₂F₂(HF₂)(PF₆) at 200 K: space group P1¯, a=4.5722(19) Å, b=4.763(2) Å, c=8.818(4) Å, α=86.967(10)°, β=76.774(10)°, γ=83.230(12)°, V=185.55(14) ų, Z=1 and R=0.0937. Pb₂F₂(HF₂)(PF₆) at 293 K: space group P1¯, a=4.586(2) Å, b=4.781(3) Å, c=8.831(5) Å, α=87.106(13)°, β=76.830(13)°, γ=83.531(11)°, V=187.27(18) Å³, Z=1 and R=0.072. Ca(HF₂)₂ crystallizes in an orthorhombic Fddd space group with a=5.5709(6) Å, b=10.1111(9) Å, c=10.5945(10) Å, V=596.77(10) Å³ at 200 K, Z=8 and R=0.028.     

C2H6 scattering from LiF(0 0 1): Influence of the molecular anisotropy on rainbow scattering in both intensity and speed distributions

We have measured the angle-resolved intensity and speed distributions of C₂H₆ scattered from LiF(0 0 1) along the [1 0 0] azimuthal direction, the largest structural corrugation direction, to investigate the effect of the molecular anisotropy on the gas–surface interaction at the corrugated surface. While clear rainbow feature is observed in the mean energy angular distribution, no rainbow feature is detected in the intensity angular distribution. From the comparisons of the obtained results to the calculated predictions based on the simple classical theory of the ellipsoid-washboard model, the effect of the molecular anisotropy is found to play a crucial role in the rainbow feature. With an increase in the extent of the molecular anisotropy such as that of C₂H₆ as compared with rare gas atoms, the integration of the intensity angular distributions for various molecular orientations results in the smearing of the rainbow feature on the corrugated surface. The rainbow scattering in the mean energy angular distribution, however, is not completely smeared out.     

Thermodynamic and spectroscopic study of the interaction of Cu(II), Ni(II), Zn(II) and Ca(II) ions with 2-amino-N-(2-oxo-2-(2-(pyridin-2-yl)ethyl amino)ethyl)acetamide,a pseudo-mimic of human serum albumin

The protonation equilibria of 2-amino-N-(2-oxo-2-(2-(pyridin-2-yl)ethyl amino)ethyl)acetamide ([H₂(556)–N]) and the complexation of this ligand with Cu(II) Ca(II), Zn(II) and Ni(II) have been studied by glass electrode potentiometry and UV–visible spectrophotometry. From pH ∼2.00–11.00, five models for Cu(II) with the following complexes; MLH, ML, MLH₋₁, MLH₋₂ and MLH₋₃ were generated and observed to describe the experimental data equally well as far as the statistical criteria were concerned. The MLH₋₂ complex predominates at physiological pH in all five models, while the MLH₋₁ complex species exists only at low concentration in two models. The coordination in the MLH₋₂ complex suggested the involvement of one amino, two deprotonated peptides and one pyridyl nitrogen atoms. Molecular mechanics (MM) calculations confirmed the MLH₋₂ complex as the most stable species. Speciation calculations, using a blood plasma model, predicted that the Cu(II)–[H₂(556)–N] complex is able to mobilize Cu(II). Octanol/water partition of CuLH₋₂ showed that 30% of the complex went into the octanol phase, hence promoting percutaneous absorption of copper. The complex is a poor mimic of native copper–zinc superoxide dismutase.