Reproducibility of sample separation using liquid or forced air convection thermostatted high performance capillary electrophoresis systems

Run-to-run sample separation reproducibility has been compared on two commercial high performance capillary electrophoresis units which differ in the mode by which the capillary temperature is thermostatted. Three standard analytes, differing dramatically in molecular character and size, were used for the analysis: benzoic acid, a 14 amino acid peptide from human chorionic gonadotropin, and ribonuclease A represent, respectively, small stable organic molecules, small peptides with little or no secondary structure, and proteins with secondary structure. These standards were evaluated with regard to reproducibility of migration time, peak area, and peak height. The analyses, performed in buffers of optimum pH for the separations, demonstrated that the liquid and forced air convection thermostatted systems both performed extremely well. The reproducibility, as judged by the percent coefficient of variance (% CV) of replicate analyses, was generally found to be less than 1 % (migration time); the reproducibility decreased in the order migration time > peak height > peak area. Whereas the absolute % CV values for MT_rel (migration relative to a standard) observed with the liquid thermostatted system were 2- to 4-fold lower than those observed with the forced air convection thermostatted system, there was little statistically significant difference between the two. As expected, the data indicated a reduction in reproducibility as the complexity of the analyte increased, perhaps as the result of an increased potential for wall interactions. Comparing separations in which low (≈?1 watt/meter [W/m] of capillary) and high (>5 W/m) Joule heat was generated by altering the sodium chloride content of the buffer revealed few statistically significant differences in the reproducibility obtained from the two systems. With these particular standard analytes and their respective buffer systems, there appears to be little difference between forced air convection and liquid thermostatting of the capillary.     

Inverse colloidal crystal membranes for hydrophobic interaction membrane chromatography

A collaborative study on the robustness and portability of a capillary electrophoresis‐mass spectrometry method for peptide mapping was performed by an international team, consisting of 13 independent laboratories from academia and industry. All participants used the same batch of samples, reagents and coated capillaries to run their assays, whereas they utilized the capillary electrophoresis‐mass spectrometry equipment available in their laboratories. The equipment used varied in model, type and instrument manufacturer. Furthermore, different types of sheath‐flow capillary electrophoresis–mass spectrometry interfaces were used. Migration time, peak height and peak area of ten representative target peptides of trypsin‐digested bovine serum albumin were determined by every laboratory on two consecutive days. The data were critically evaluated to identify outliers and final values for means, repeatability (precision within a laboratory) and reproducibility (precision between laboratories) were established. For relative migration time the repeatability was between 0.05 and 0.18% RSD and the reproducibility between 0.14 and 1.3% RSD. For relative peak area repeatability and reproducibility values obtained were 3–12 and 9–29% RSD, respectively. These results demonstrate that capillary electrophoresis‐mass spectrometry is robust enough to allow a method transfer across multiple laboratories and should promote a more widespread use of peptide mapping and other capillary electrophoresis‐mass spectrometry applications in biopharmaceutical analysis and related fields.     

Simultaneous analysis of polyhydroxylated alkaloids by capillary electrophoresis using borate complexation and evaluation of sweeping technique for sensitivity improvement

Summary Capillary zone electrophoresis coupled to UV detection was used for the simultaneous analysis of naturally occurring polyhydroxylated alkaloids. This separation was based on anin-situ complexation with borate ions. The effect of parameters such as borate concentration, capillary temperature and analyte molecular structure on migration times and selectivity were discussed. The best separation was obtained with a fused silica capillary (48.5 cm total length ×50 μm I.D., with a bubble factor of 3), 80 mM sodium tetraborate aqueous solution at pH 9.2 and temperature of 20°C. The method was validated and showed good data in terms of migration time and peak area reproducibility, selectivity, linearity and accuracy. The validated method was applied to determine miglitol in commercially available pharmaceutical tablets. To further improve method sensitivity, a sweeping technique involving borate ions was evaluated. This technique was found very sensitive to the analyte complexation with borate, borate concentration, and temperature as well as sample matrix. In the case of miglitol, a 35-fold improvement in peak height was achieved.     

毛细管电泳检测奶粉中添加的大豆分离蛋白

采用毛细管电泳方法对乳蛋白和大豆分离蛋白进行检测。选择聚丙烯酰胺涂层毛细管,在紫外检测波长214 nm、分离电压25 kV条件下测出五种乳蛋白在不同线性范围内的线性相关系数均大于0.998,各乳蛋白的迁移时间和峰面积的相对标准偏差(RSD)分别小于0.34%和4.50%,奶粉样品加标回收率范围为88.07%~102%;通过对比大豆7S和11S组分、大豆分离蛋白及乳蛋白的电泳图谱,定性确定出大豆分离蛋白8个特征峰,各特征峰的迁移时间和峰面积的RSD分别小于0.36%和4.87%,方法重现性较好。建立了奶粉中添加大豆分离蛋白的半定量检测方法。     

Migration time correction for the analysis of derivatized amino acids and oligosaccharides by micellar capillary electrochromatography

Migration-time reproducibility is essential in the use of capillary electrophoresis to identify components in mixtures. Two methods based on the migration time of either one or two reference markers are proposed for improving migration time reproducibility. These methods were evaluated to determine the migration time reproducibility for phenylthiohydantoin-amino acids, fluorescein thiohydantoin-amino acids, and tetramethylrhodamine labeled oligosaccharides. In the best case, the relative standard deviation of the migration time was reduced from >3% without correction to <0.04% with the two-marker correction.     

槟榔中槟榔碱和槟榔次碱的毛细管电泳分析

建立了槟榔中槟榔碱和槟榔次碱的毛细管电泳分析方法。考察了电解质溶液ｐＨ值变化对分离的影响,在选定实验条件下,槟榔碱和槟榔次碱得到了很好的分离,整个分析过程在１０ｍｉｎ内完成,其中槟榔碱和槟榔次碱的迁移时间相对标准偏差在０．４％￣０．７％之间,峰面积的相对标准偏差在３．４％￣３．８％之间。用于实际样品测定,结果满意。     

New preconditioning strategy for the determination of inorganic anions with capillary zone electrophoresis using indirect UV detection

It is widely accepted that preconditioning procedures are indispensable in capillary electrophoresis in order to achieve reproducibility of migration times and peak areas. Several preconditioning strategies have been employed for electrophoretic determinations of inorganic anions using indirect UV detection including simple flushing with buffer or alkaline or acid pre-rinsing followed by flushing with electrolyte. We investigated the influence of various preconditioning strategies on the reproducibility of migration times and peak areas of inorganic anions. The electrolyte systems for indirect UV detection were based on pyromellitic acid and chromic acid respectively as UV absorbing probes and hexamethonium hydroxide as electroosmatic flow modifier. Preconditioning agents under investigation were electrolyte buffer, NaOH, HCl and the free acids of the UV absorbing probes. Investigations showed that reproducibility of migration times and peak areas can be significantly improved by acid pre-rinsing using the corresponding acid of the UV absorbing probes compared to preconditioning by flushing the capillary with buffer. In contrast to acid pre-rinsing using hydrochloric acid no interfering signals within the migration time window of inorganic anions under investigation can be observed. The optimized preconditioning procedure yields relative standard deviations of migration times less than 0.25% (n=10). Relative standard deviations of corrected peak areas were below 5% applying acid preconditioning using pyromellitic acid.     

一种新型毛细管区带电泳谱图记录模式的研究

提出一种以电通量域模式(吸收信号对电通量作图)代替以时间域模式(吸收信号对时间作图)记录毛细管区带电泳谱图的新模式.在阐述了这种记录模式优点的基础上,用常用的硼砂和磷酸盐体系在不同的电压和固定电压下分离了4种药物,其迁移时间的相对标准偏差分别在41.5%(不同电压下)和1.90%以上(固定电压),而相应的电通量的标准偏差都在1.05%以下,这进一步从实验角度证实了电通量域模式记录电泳谱图的优点:具有极强的抗电场强度波动和温度波动的能力,提高了再现性.以电通量模式记录电泳谱图,还可在一定程度上提高峰面积的重现性.这种记录模式降低了对仪器本身的要求(高压电压电源的稳定性和恒温装置),有可能促进国产低价位毛细管电泳仪的广泛使用     

Assay of melamine in milk products with a pH‐mediated stacking technique in capillary electrophoresis

A pH‐mediated stacking method in capillary electrophoresis as an assay for low concentrations of melamine in milk products was established. Real samples were treated with acetone and sodium acetate and injected directly after centrifugation and filtration. Several experimental factors, such as buffer pH, buffer concentration, sample matrix, injection/sweeping ratio, sweeping time/voltages, separation voltages, as well as sample pretreatment, which affected stacking and separation, were investigated and optimized. Under the selected condition, a low LOD of 0.01 μmol/L (S/N = 5) and a wide range of linearity of 0.01～1.0 μmol/L could be easily achieved with a good reproducibility (RSDs < 5.8% for both migration time and peak area) and an acceptable recovery of 94.0～103.2% (for milk, infant formula, yogurt, and milk products). The proposed method was suitable for routine assay of melamine in real milk samples.     

The capillary electrophoresis separation of benzodiazepine drug using dextran sulfate and SDS as running buffer

Capillary electrophoresis has been applied the analyses of many clinical drugs due to its rapid, high-resolution separation. In this study, electrokinetic chromatography involving the combination of SDS and dextran sulfate, which are synthetic polymers, was examined in order to obtain high resolution. Use of 2% dextran sulfate (10,000 molecular weight), 20 mm SDS running buffer containing boric acid solution (pH 9.2) and a silica capillary (inner diameter of 75 micro m, effective length of 50 cm, 57 cm overall length) afforded separation of 10 kinds of benzodiazepines. The detection limit was 0.2 micro g/mL; additionally, reproducibilities were de fi ned as the peak height and migration time. The average peak height was 5.92% (2.46-17.61), whereas the average migration time was 0.44% (0.18-0.76; n = 5). This separations system can be applied to the analysis and measurement of other pharmaceuticals as well.     

Influence of temperature control in capillary electrophoresis

We have investigated the influence of capillary temperature on migration time and peak area and have evaluated different cooling systems. It was found that for applied voltages below 15 kV (i.e. those most frequently used) temperature control effectively improves peak area reproducibility but has less effect on migration time.     

迁移时间归一化法改善毛细管电泳表征中药大黄的重现性

探讨了迁移时间归一化法改善中药毛细管电泳分析迁移时间重现性的原理,并将其应用于实际样品的分析。迁移时间归一化法认为,在相同的操作电压、缓冲液组成和温度条件下,多次电泳实验中迁移时间产生差别的主要原因是多次电泳实验中电渗流产生了差异。迁移时间归一化法就是通过选择电泳谱图中的一个或两个峰作为标记峰,将各次电泳实验的迁移时间都归一到第一次电泳实验中的迁移时间。比较多次电泳实验中迁移时间(t)的相对标准偏差(RSD)、经单峰归一化处理的迁移时间(t′)的RSD、经双峰归一化处理的迁移时间(t″)的RSD、迁移时间比(t/tistd,istd代表所选择的标记物)的RSD,发现RSD(t″)相似文献   

Capillary isoelectric focusing of proteins utilizing poly(vinylpyrrolidone)- and plexiglas-coated columns

Fused-silica capillaries chemically derivatized with silane/poly(vinylpyrrolidone) (PVP) or dynamically modified with plexiglas [poly(methyl methacrylate)] were prepared and evaluated with regard to column stability and separation performance for capillary isoelectric focusing of standard proteins. The PVP coating showed the better stability and was good for at least 100 runs while the plexiglas coating started to deteriorate after about 30 runs. The time spent for the plexiglas coating is about 40 minutes while the PVP coating requires two days. The migration time reproducibility was better with the PVP capillary (RSD 0.7-1.6%, n = 5) compared to the plexiglas-coated column (RSD 1.2-2.9%, n = 5) while peak area and height varied over a similar interval (RSD 2-28.1% area; 0.9-22.7% height, n = 5). The two most consistent proteins in this evaluation, viz. myoglobin A and carbonic anhydrase II, showed linear dynamic ranges between 5-150 and 5-50 microg/mL, and limits of detections at 2 and 1 microg/mL, respectively, employing UV detection at 280 nm.     

Polycations as displacer in high-performance bioseparation

Non-aqueous capillary electrophoresis with electrochemical detection (NACE-ED) was applied to the determination of nicotine. The measurements were performed using an acetonitrile-based buffer. Nicotine was shown to yield well defined voltammetric signals suitable for oxidative detection. The precision of NACE-ED regarding migration time and peak height for samples containing 8 micrograms/ml nicotine is expressed by relative standard deviations of 0.1% and 1.6%, respectively (n = 8). The limit of detection for nicotine was 13 ng/ml (286 fg). For nicotine determination in tobacco samples various solutions were studied regarding the extraction efficiency in an ultrasonic bath. The highest extraction efficiency was obtained using a solvent mixture consisting of acetonitrile-acetic acid-water (20:5:75, v/v). The results for nicotine determination in tobacco were evaluated using tobacco reference material with certified nicotine content. Analytical aspects such as accuracy, reproducibility and selectivity were addressed in this work. The measurements were based on the use of a newly developed electrochemical detector cell which was found to enable user-friendly operation of NACE-ED measurements.     

The new approach of standardization of capillary electrophoresis

In this paper, we develope the new standardization methods to eliminate the influence in capillary electrophoresis (CE). The markers were used to determine the basis position and then correct the data of sample by the migration time of standard sample, and make the migration time of samples consistent with the standard sample by the criterion of the marker. The problem of time transition was corrected in this way. Then according to the peak height or peak area of the marker in the sample (peak height was used here) compared with the standard sample, the sample data was zoomed appropriately. The absorbance error was made to be correct. The wavelet de-noise method was also used to make the data smooth and get a good baseline.     

The new approach of standardization of capillary electrophoresis

In this paper, we develope the new standardization methods to eliminate the influence in capillary electrophoresis (CE). The markers were used to determine the basis position and then correct the data of sample by the migration time of standard sample, and make the migration time of samples consistent with the standard sample by the criterion of the marker. The problem of time transition was corrected in this way. Then according to the peak height or peak area of the marker in the sample (peak height was used here) compared with the standard sample, the sample data was zoomed appropriately. The absorbance error was made to be correct. The wavelet de-noise method was also used to make the data smooth and get a good baseline.     

Quantitative determination of clenbuterol, salbutamol and tulobuterol enantiomers by capillary electrophoresis

Enantiomers of clenbuterol, salbutamol and tulobuterol were directly separated and quantitated from a spiked sample by capillary electrophoresis (CE) using sulfated β-cyclodextrin (SCD) as chiral selector and phosphate as running buffer. The SCD and buffer concentration, pH and field strength were the parameters studied to optimize the separation. Optimal separation was obtained using 50 mM of phosphate monobasic at pH = 2.24, 0.25% (w/w) of sulfated cyclodextrin and a field strength of 10 kV, with 20 min total time analysis. Comparison between two different injection modes (hydrodynamic and electrokinetic) was made. In the hydrodynamic mode, repeatability (expressed as relative standard deviation, RSD) was less than 1.2% for migration times for all the analyte peaks and less than 2% for peak area percentages. With respect to reproducibility, RSD was less than 3.8% for migration time and less than 3% for peak area percentages. Calibration curves were set up for two different sample concentration ranges (1 to 10 μg mL^–1 and 160– 800 ng mL^–1, of each of the racemates studied). Although the electrokinetic injection mode for an aqueous sample appeared to suffer from some enantiodiscrimination, calibration curves were linear in the range between 1 and 10 ng mL^–1 with regression coefficients ranging from 0.9996 to 0.9952. As in the case of hydrodynamic injection, the method was tested with a spiked sample.     

Characterization and performance of injection molded poly(methylmethacrylate) microchips for capillary electrophoresis

Injection molded poly(methylmethacrylate) (IM-PMMA), chips were evaluated as potential candidates for capillary electrophoresis disposable chip applications. Mass production and usage of plastic microchips depends on chip-to-chip reproducibility and on analysis accuracy. Several important properties of IM-PMMA chips were considered: fabrication quality evaluated by environmental scanning electron microscope imaging, surface quality measurements, selected thermal/electrical properties as indicated by measurement of the current versus applied voltage (I-V) characteristic and the influence of channel surface treatments. Electroosmotic flow was also evaluated for untreated and O2 reactive ion etching (RIE) treated surface microchips. The performance characteristics of single lane plastic microchip capillary electrophoresis (MCE) separations were evaluated using a mixture of two dyes-fluorescein (FL) and fluorescein isothiocyanate (FITC). To overcome non-wettability of the native IM-PMMA surface, a modifier, polyethylene oxide was added to the buffer as a dynamic coating. Chip performance reproducibility was studied for chips with and without surface modification via the process of RIE with O2 and by varying the hole position for the reservoir in the cover plate or on the pattern side of the chip. Additionally, the importance of reconditioning steps to achieve optimal performance reproducibility was also examined. It was found that more reproducible quantitative results were obtained when normalized values of migration time, peak area and peak height of FL and FITC were used instead of actual measured parameters.     

Influence of operating parameters on reproducibility in capillary electrophoresis.

The reproducibility of two migration parameters (retention time and mobility) of a seven-component test mixture was examined under various operating conditions using laboratory-built capillary electrophoresis systems. It was found that the frequency of rinsing the capillary and the solutions used for rinsing had the greatest effect on migration reproducibility. In addition, it was found that the migration behavior of solutes that interact with micelles is not repeatable unless the proper rinse protocol is applied. Inconsistent migration behavior is linked to inconsistent total current of the system. Preliminary investigations indicate that the fluctuation in total current were associated with non-equilibrium conditions between the buffer and the capillary wall.     

毛细管电泳电导法快速检测饲料添加剂氯化胆碱

采用毛细管电泳电导法对饲料添加剂氯化胆碱进行了测定.实验优化了缓冲介质、分离电压、毛细管长度和内径等参数.结果表明:在优化条件下,氯化胆碱在4 min左右可以实现分离检测,线性范围在41.8～1.20 μg/mL,检出限为0.8 μg/mL;迁移时间和峰面积的相对标准偏差分别为0.6%、2.1%;样品加标回收率为97%～105%.将该法用于粉剂和饲料中氯化胆碱的检测,取得了满意的结果.