在甲烷部分氧化制合成气中Pt-Ni/Al_2O_3催化剂中的Pt-Ni协同作用机理(英文)

甲烷部分氧化制合成气的研究是在Ｎｉ／Ａｌ２Ｏ３催化剂上进行的。结果表明,添加少量的Ｐｔ可显著提高甲烷转化率和ＣＯ选择性并增加Ｎｉ／Ａｌ２Ｏ３催化剂的稳定性。通过ＸＲＤ、ＸＰＳ、ＴＰＲ和ＴＰＤ等表征手段发现,Ｐｔ－Ｎｉ／Ａｌ２Ｏ３催化剂中形成了Ｐｔ－Ｎｉ合金,Ｐｔ在催化剂表面富集。分析ＴＰＲ和ＴＰＤ数据可知,Ｐｔ－Ｎｉ双金属的相互作用阻止了催化剂的烧结和Ｎｉ的流失,提高了催化剂的活性。另外,Ｐｔ－Ｎｉ的协同作用也抑制了催化剂表面积炭的产生。     

Synergetic effect of surface and subsurface Ni species at Pt-Ni bimetallic catalysts for CO oxidation

Various well-defined Ni-Pt(111) model catalysts are constructed at atomic-level precision under ultra-high-vacuum conditions and characterized by X-ray photoelectron spectroscopy and scanning tunneling microscopy. Subsequent studies of CO oxidation over the surfaces show that a sandwich surface (NiO(1-x)/Pt/Ni/Pt(111)) consisting of both surface Ni oxide nanoislands and subsurface Ni atoms at a Pt(111) surface presents the highest reactivity. A similar sandwich structure has been obtained in supported Pt-Ni nanoparticles via activation in H(2) at an intermediate temperature and established by techniques including acid leaching, inductively coupled plasma, and X-ray adsorption near-edge structure. Among the supported Pt-Ni catalysts studied, the sandwich bimetallic catalysts demonstrate the highest activity to CO oxidation, where 100% CO conversion occurs near room temperature. Both surface science studies of model catalysts and catalytic reaction experiments on supported catalysts illustrate the synergetic effect of the surface and subsurface Ni species on the CO oxidation, in which the surface Ni oxide nanoislands activate O(2), producing atomic O species, while the subsurface Ni atoms further enhance the elementary reaction of CO oxidation with O.     

纳米金催化一氧化碳氧化反应的理论研究

近年来,纳米金催化剂独特的催化性质,特别是其优异的低温催化氧化活性,引起了人们极大的研究热情.除低温选择氧化外,在精细化学品合成、大气污染物消除、氢能的转换和利用等领域也开发出了一系列有广泛应用前景的金催化反应.此外,体相金的化学惰性和纳米金的超高活性之间差异的“鸿沟”也引起了理论工作者浓厚兴趣,试图从原理上理解体相金和纳米金活性差异的根源. CO催化氧化是最具有代表性的研究金催化活性的化学反应,本文主要综述了近十多年来金催化 CO氧化反应理论计算方面的研究工作.一般认为, CO在纳米金表面的吸附是 CO氧化反应的初始步骤.密度泛函理论研究表明, CO在金表面的吸附强度主要与被吸附金原子的配位数有关：金配位数越低, CO的吸附能越强,部分研究结果表明两者之间存在近似的线性关系.我们研究发现, CO吸附强度也与被吸附金周围配位金原子的相对位置有关,其中位于正下方的配位金原子加强 CO吸附,而位于侧位的配位金原子则弱化 CO吸附,这显然削弱了 CO吸附与金配位数线性关系的可靠性.理论研究表明,在纯金表
　　面上 O2吸附强度一般很弱,只有在一些特殊结构的金团簇上才有较强的吸附,但在 Au/TiO2界面及 CeO2表面上 O2吸附较强.金表面原子氧的吸附和金的表面结构有关.我们发现,原子氧倾向于在金的表面形成一种线性的 O–Au–O结构以增加其稳定性.当金表面的氧覆盖度增大时,会形成一种金氧化物薄膜结构,其结构依赖于氧的化学势和金的表面结构.纳米金催化 CO氧化反应机理可能因体系、载体等的差异而不同.大部分理论计算结果表明,在纯金表面上 O2很难直接解离形成原子氧,因此反应机理可能是吸附的 CO先与 O2反应形成了一种 CO–O2中间体,然后解离形成 CO2.在 Au/TiO2和 Au/CeO2催化剂上 CO催化氧化机理争议很大,均有计算结果支持 LH机理和 M–vK机理.另外,根据实验上观察到了负载型纳米金能直接活化分子氧的结果,理论上也提出了分子氧先解离为原子氧再与 CO反应的氧解离机理.针对如何解离分子氧问题,人们分别提出了低配位金模型、正方形金结构模型、Ti5c模型及 Au/Ti5c模型等.我们也提出了一种独特的双直线 O–Au–O模型来理解 Au/TiO2或 Au/CeO2界面解离活化分子氧.理论计算结果表明,低配位的金,金和载体之间的电荷转移,以及金所表现出的强相对论效应对于纳米金的活性影响很大.需要特别指出的是,金的强相对论效应有助于理解金表面的 CO吸附与金配位的关系、金表面原子氧的吸附特性、金氧化物薄膜的结构和分子氧的活化等过程.我们认为,金的强相对论作用导致了体相金的化学惰性以及纳米金的活性,因此相对论效应的深入研究将有助于理解金催化 CO氧化反应机理,从而有助于深层次理解纳米金催化活性来源.     

甲烷部分氧化制合成气Pt-Ni/Al~2O~3催化剂的研究

研究了Ni/Al~2O~3,Pt/Al~2O~3和一系列Pt-Ni/Al~2O~3催化剂对甲烷部分氧化制合成气的催化作用,发现Pt-Ni/Al~2O~3催化剂显示了比Ni/Al~2O~3和Pt/Al~2O~3更高的活性和稳定性。H~2-TPR,CO-TPD,CO~2-TPD,SEM,XPS和XRD等结果证明:Pt和Ni之间存在较强的相互作用,Pt和部分Ni形成固溶体合金并且Pt在催化剂表面富集。Pt和Ni之间的相互作用提高了催化剂的活性和稳定性,甲烷在Pt-Ni/Al~2O~3上的催化部分氧化具有不同于在Pt/Al~2O~3和Ni/Al~2O~3上的反应性能。     

Deep Oxidation of Methane on a Pt/Si3N4 Catalyst

We have studied platinum catalysts supported on silicon nitride Si₃N₄ in the process of deep oxidation of methane. We have used transmission electron microscopy and X-ray photoelectron spectroscopy to study the surface properties of the Pt/Si₃N₄ samples before and after the catalytic reaction. We have established that the metallic platinum particles in freshly prepared systems are characterized by average sizes of 1.7-5.3 nm, while after the catalytic reaction we observe formation of Pt crystallites up to 30-70 nm in size. We hypothesize that the observed deactivation of platinum catalysts in deep oxidation of methane is connected with crystallization of the metallic particles and their entrainment with the reaction products during catalysis.     

Pt/Al2O3和Pt/CeO2/Al2O3催化甲烷部分氧化制合成气反应

研究了Pt/Al₂O₃和Pt/CeO₂/Al₂O₃对甲烷部分氧化制合成气反应的催化活性,发现Pt/CeO₂/Al₂O₃显示了更高的甲烷转化率和合成气选择性.用H₂-TPR、H₂-TPD、SEM-EDX和XRD等技术对催化剂进行了表征.CeO₂和Pt相互作用促进Pt在催化剂表面的分散,抑制Pt在催化剂表面的迁移;降低了催化剂的燃烧活性,提高了催化剂的部分氧化活性和选择性,可避免因催化剂床层局部温度过高而导致催化剂活性下降或失活,提高了催化剂的稳定性.同时,CeO₂通过促进水汽变换反应使反应体系迅速达到平衡,提高了催化剂对H₂的选择性.     

Effects of reduction temperature and metal-support interactions on the catalytic activity of Pt/gamma-Al2O3 and Pt/TiO2 for the oxidation of CO in the presence and absence of H2

TiO2- and gamma-Al2O3-supported Pt catalysts were characterized by HRTEM, XPS, EXAFS, and in situ FTIR spectroscopy after activation at various conditions, and their catalytic properties were examined for the oxidation of CO in the absence and presence of H2 (PROX). When gamma-Al2O3 was used as the support, the catalytic, electronic, and structural properties of the Pt particles formed were not affected substantially by the pretreatment conditions. In contrast, the surface properties and catalytic activity of Pt/TiO2 were strongly influenced by the pretreatment conditions. In this case, an increase in the reduction temperature led to higher electron density on Pt, altering its chemisorptive properties, weakening the Pt-CO bonds, and increasing its activity for the oxidation of CO. The in situ FTIR data suggest that both the terminal and bridging CO species adsorbed on fully reduced Pt are active for this reaction. The high activity of Pt/TiO2 for the oxidation of CO can also be attributed to the ability of TiO2 to provide or stabilize highly reactive oxygen species at the metal-support interface. However, such species appear to be more reactive toward H2 than CO. Consequently, Pt/TiO2 shows substantially lower selectivities toward CO oxidation under PROX conditions than Pt/gamma-Al2O3.     

Kinetics of CO oxidation on high-concentration phases of atomic oxygen on Pt(111)

Temperature-programmed reaction spectroscopy (TPRS) and direct, isothermal reaction-rate measurements were employed to investigate the oxidation of CO on Pt(111) covered with high concentrations of atomic oxygen. The TPRS results show that oxygen atoms chemisorbed on Pt(111) at coverages just above 0.25 ML (monolayers) are reactive toward coadsorbed CO, producing CO(2) at about 295 K. The uptake of CO on Pt(111) is found to decrease with increasing oxygen coverage beyond 0.25 ML and becomes immeasurable at a surface temperature of 100 K when Pt(111) is partially covered with Pt oxide domains at oxygen coverages above 1.5 ML. The rate of CO oxidation measured as a function of CO beam exposure to the surface exhibits a nearly linear increase toward a maximum for initial oxygen coverages between 0.25 and 0.50 ML and constant surface temperatures between 300 and 500 K. At a fixed CO incident flux, the time required to reach the maximum reaction rate increases as the initial oxygen coverage is increased to 0.50 ML. A time lag prior to the reaction-rate maximum is also observed when Pt oxide domains are present on the surface, but the reaction rate increases more slowly with CO exposure and much longer time lags are observed, indicating that the oxide phase is less reactive toward CO than are chemisorbed oxygen atoms on Pt(111). On the partially oxidized surface, the CO exposure needed to reach the rate maximum increases significantly with increases in both the initial oxygen coverage and the surface temperature. A kinetic model is developed that reproduces the qualitative dependence of the CO oxidation rate on the atomic oxygen coverage and the surface temperature. The model assumes that CO chemisorption and reaction occur only on regions of the surface covered by chemisorbed oxygen atoms and describes the CO chemisorption probability as a decreasing function of the atomic oxygen coverage in the chemisorbed phase. The model also takes into account the migration of oxygen atoms from oxide domains to domains with chemisorbed oxygen atoms. According to the model, the reaction rate initially increases with the CO exposure because the rate of CO chemisorption is enhanced as the coverage of chemisorbed oxygen atoms decreases during reaction. Longer rate delays are predicted for the partially oxidized surface because oxygen migration from the oxide phase maintains high oxygen coverages in the coexisting chemisorbed oxygen phase that hinder CO chemisorption. It is shown that the time evolution of the CO oxidation rate is determined by the relative rates of CO chemisorption and oxygen migration, R(ad) and R(m), respectively, with an increase in the relative rate of oxygen migration acting to inhibit the reaction. We find that the time lag in the reaction rate increases nearly exponentially with the initial oxygen coverage [O](i) (tot) when [O](i) (tot) exceeds a critical value, which is defined as the coverage above which R(ad)R(m) is less than unity at fixed CO incident flux and surface temperature. These results demonstrate that the kinetics for CO oxidation on oxidized Pt(111) is governed by the sensitivity of CO binding and chemisorption on the atomic oxygen coverage and the distribution of surface oxygen phases.     

甲烷部分氧化制合成气Ⅰ．催化剂设计

在已有的关于甲烷催化部分氧化和催化氧化资料的基础上，假设了一个甲烷部分氧化反应的机理，并据此提出了催化剂设计的原则．在分析了Ｏ２，ＣＯ和Ｈ２等在金属表面上的吸附热的基础上，得出如下结论：金属Ｎｉ，Ｐｔ，Ｐｄ，Ｒｈ，Ｒｕ和Ｉｒ可作为甲烷部分氧化催化剂的主要组分，Ｃｕ将是最佳助剂，具有较好的氢溢流功能的Ａｌ２Ｏ３可作为最佳载体     

Structure, chemical composition, and reactivity correlations during the in situ oxidation of 2-propanol

Unraveling the complex interaction between catalysts and reactants under operando conditions is a key step toward gaining fundamental insight in catalysis. We report the evolution of the structure and chemical composition of size-selected micellar Pt nanoparticles (～1 nm) supported on nanocrystalline γ-Al(2)O(3) during the catalytic oxidation of 2-propanol using X-ray absorption fine-structure spectroscopy. Platinum oxides were found to be the active species for the partial oxidation of 2-propanol (<140 °C), while the complete oxidation (>140 °C) is initially catalyzed by oxygen-covered metallic Pt nanoparticles, which were found to regrow a thin surface oxide layer above 200 °C. The intermediate reaction regime, where the partial and complete oxidation pathways coexist, is characterized by the decomposition of the Pt oxide species due to the production of reducing intermediates and the blocking of O(2) adsorption sites on the nanoparticle surface. The high catalytic activity and low onset reaction temperature displayed by our small Pt particles for the oxidation of 2-propanol is attributed to the large amount of edge and corner sites available, which facilitate the formation of reactive surface oxides. Our findings highlight the decisive role of the nanoparticle structure and chemical state in oxidation catalytic reactions.     

Hydrogen Spillover Enhanced Hydroxyl Formation and Catalytic Activity Toward CO Oxidation at the Metal/Oxide Interface

H₂‐promoted catalytic activity of oxide‐supported metal catalysts in low‐temperature CO oxidation is of great interest but its origin remains unknown. Employing an FeO(111)/Pt(111) inverse model catalyst, we herewith report direct experimental evidence for the spillover of H(a) adatoms on the Pt surface formed by H₂ dissociation to the Pt?FeO interface to form hydroxyl groups that facilely oxidize CO(a) on the neighboring Pt surface to produce CO₂. Hydroxyl groups and coadsorbed water play a crucial role in the occurrence of hydrogen spillover. These results unambiguously identify the occurrence of hydrogen spillover from the metal surface to the noble metal/metal oxide interface and the resultant enhanced catalytic activity of the metal/oxide interface in low‐temperature CO oxidation, which provides a molecular‐level understanding of both H₂‐promoted catalytic activity of metal/oxide ensembles in low‐temperature CO oxidation and hydrogen spillover.     

CO oxidation on nanostructured SnO(x)/Pt(111) surfaces: unique properties of reduced SnO(x)

We have investigated surface CO oxidation on "inverse catalysts" composed of SnO(x) nanostructures supported on Pt(111) using X-ray photoelectron spectroscopy (XPS), low-energy ion scattering spectroscopy (LEISS) and temperature-programmed desorption (TPD). Nanostructures of SnO(x) were prepared by depositing Sn on Pt(111) pre-covered by NO(2) layers at low temperatures. XPS data show that the SnO(x) nanoparticles are highly reduced with Sn(II)O being the dominant oxide species, but the relative concentration of Sn(II) in the SnO(x) nanoparticles decreases with increasing Sn coverage. We find that the most active SnO(x)/Pt(111) surface for CO oxidation has smallest SnO(x) coverage. Increasing the surface coverage of SnO(x) reduces CO oxidation activity and eventually suppresses it altogether. The study suggests that reduced Sn(II)O, rather than Sn(IV)O(2), is responsible for surface CO oxidation. The occurrence of a non-CO oxidation reaction path involving reduced Sn(II)O species at higher SnO(x) coverages accounts for the decreased CO oxidation activity. From these results, we conclude that the efficacy of CO oxidation is strongly dependent on the availability of reduced tin oxide sites at the Pt-SnO(x) interface, as well as unique chemical properties of the SnO(x) nanoparticles.     

Methane oxidation mechanism on Pt(111): a cluster model DFT study

The electronic energy barriers of surface reactions pertaining to the mechanism of the electrooxidation of methane on Pt (111) were estimated with density functional theory calculations on a 10-atom Pt cluster, using both the B3LYP and PW91 functionals. Optimizations of initial and transition states were performed for elementary steps that involve the conversion of CH(4) to adsorbed CO at the Pt/vacuum interface. As a first approximation we do not include electrolyte effects in our model. The reactions include the dissociative chemisorption of CH(4) on Pt, dehydrogenation reactions of adsorbed intermediates (*CH(x) --> *CH(x-1) + *H and *CH(x)O --> *CH(x-1)O + *H), and oxygenation reactions of adsorbed CH(x) species (*CH(x) + *OH --> *CH(x)OH). Many pathways were investigated and it was found that the main reaction pathway is CH(4) --> *CH(3) --> *CH(2) --> *CH --> *CHOH --> *CHO --> *CO. Frequency analysis and transition-state theory were employed to show that the methane chemisorption elementary step is rate-limiting in the above mechanism. This conclusion is in agreement with published experimental electrochemical studies of methane oxidation on platinum catalysts that have shown the absence of an organic adlayer at electrode potentials that allow the oxidation of adsorbed CO. The mechanism of the electrooxidation of methane on Pt is discussed.     

Characterization of trimetallic Pt-Pd-Au/CeO2 catalysts combinatorial designed for methane total oxidation

In the present work, the role and the effect of platinum and gold on the catalytic performance of ceria supported tri-metallic Pt-Pd-Au catalysts have been studied. The optimum composition of these tri-metallic supported catalysts has been discovered using methods and tools of combinatorial catalyst library design. Detailed catalytic, spectroscopic and physico-chemical characterization of catalysts in the vicinity of the optimum in the given compositional space has been performed. The temperature-programmed oxidation of methane revealed that the addition of Pt and Au to Pd/CeO2 catalyst resulted in higher conversion values in the whole investigated temperature range compared to the monometallic Pd catalyst. The time-on-stream experiments provided further evidence for the high-stability of tri-metallic catalysts compared to the monometallic one. Kinetic studies revealed the stronger adsorption of methane on Pt-Pd/CeO2 catalysts than over Pd/CeO2. XPS analysis showed that Pt and Au stabilize Pd in a more reduced form even under condition of methane oxidation. FTIR spectroscopy of adsorbed CO and hydrogen TPD measurements provided indirect evidences for alloying of Pt and Au with Pd. CO chemisorption data indicated that tri-metallic catalysts have increased accessible metallic surface area. It is suggested that advantageous catalytic properties of tri-metallic Pt-Au-Pd/CeO2 catalysts compared to the monometallic one can be attributed to (i) suppression of the formation of ionic forms of Pd(II), (ii) reaching an optimum ratio between Pd0 and PdO species, and (iii) stabilization of Pd in high dispersion. The results also indicate that Pd0 - PdO ensemble sites are required for methane activation.     

甲烷部分氧化制合成气反应Pt/Al_2O_3和Pt/CeO2/Al_2O_3催化剂的研究(英文)

研究了Ｐｔ／Ａｌ２Ｏ３和Ｐｔ／ＣｅＯ２／Ａｌ２Ｏ３催化剂对甲烷部分氧化制合成气反应的催化活性，发现Ｐｔ／ＣｅＯ２／Ａｌ２Ｏ３显示了比Ｐｔ／Ａｌ２Ｏ３更高的甲烷转化率和合成气选择性。用Ｈ２ＴＰＲ，Ｈ２ＴＰＤ，ＳＥＭ和ＸＲＤ等手段和技术对催化剂进行了表征。ＣｅＯ２与Ｐｔ之间存在较强的相互作用（ＳＭＳＩ），这种作用促进了Ｐｔ在催化剂表面的分散，抑制了Ｐｔ在催化剂表面的迁移，大大降低了催化剂在反应中的完全燃烧活性，提高了催化剂的部分氧化活性和选择性，避免了因催化剂床层局部温度过高而导致催化剂活性下降或失活，提高了催化剂的稳定性。同时，在反应过程中，ＣｅＯ２通过促进水蒸气变换反应（ＷＧＳＲ）的进行使反应体系迅速达到平衡，提高了催化剂对Ｈ２的选择性。     

Reactivity of chemisorbed oxygen atoms and their catalytic consequences during CH4-O2 catalysis on supported Pt clusters

Kinetic and isotopic data and density functional theory treatments provide evidence for the elementary steps and the active site requirements involved in the four distinct kinetic regimes observed during CH(4) oxidation reactions using O(2), H(2)O, or CO(2) as oxidants on Pt clusters. These four regimes exhibit distinct rate equations because of the involvement of different kinetically relevant steps, predominant adsorbed species, and rate and equilibrium constants for different elementary steps. Transitions among regimes occur as chemisorbed oxygen (O*) coverages change on Pt clusters. O* coverages are given, in turn, by a virtual O(2) pressure, which represents the pressure that would give the prevalent steady-state O* coverages if their adsorption-desorption equilibrium was maintained. The virtual O(2) pressure acts as a surrogate for oxygen chemical potentials at catalytic surfaces and reflects the kinetic coupling between C-H and O═O activation steps. O* coverages and virtual pressures depend on O(2) pressure when O(2) activation is equilibrated and on O(2)/CH(4) ratios when this step becomes irreversible as a result of fast scavenging of O* by CH(4)-derived intermediates. In three of these kinetic regimes, C-H bond activation is the sole kinetically relevant step, but occurs on different active sites, which evolve from oxygen-oxygen (O*-O*), to oxygen-oxygen vacancy (O*-*), and to vacancy-vacancy (*-*) site pairs as O* coverages decrease. On O*-saturated cluster surfaces, O*-O* site pairs activate C-H bonds in CH(4) via homolytic hydrogen abstraction steps that form CH(3) groups with significant radical character and weak interactions with the surface at the transition state. In this regime, rates depend linearly on CH(4) pressure but are independent of O(2) pressure. The observed normal CH(4)/CD(4) kinetic isotope effects are consistent with the kinetic-relevance of C-H bond activation; identical (16)O(2)-(18)O(2) isotopic exchange rates in the presence or absence of CH(4) show that O(2) activation steps are quasi-equilibrated during catalysis. Measured and DFT-derived C-H bond activation barriers are large, because of the weak stabilization of the CH(3) fragments at transition states, but are compensated by the high entropy of these radical-like species. Turnover rates in this regime decrease with increasing Pt dispersion, because low-coordination exposed Pt atoms on small clusters bind O* more strongly than those that reside at low-index facets on large clusters, thus making O* less effective in H-abstraction. As vacancies (*, also exposed Pt atoms) become available on O*-covered surfaces, O*-* site pairs activate C-H bonds via concerted oxidative addition and H-abstraction in transition states effectively stabilized by CH(3) interactions with the vacancies, which lead to much higher turnover rates than on O*-O* pairs. In this regime, O(2) activation becomes irreversible, because fast C-H bond activation steps scavenge O* as it forms. Thus, O* coverages are set by the prevalent O(2)/CH(4) ratios instead of the O(2) pressures. CH(4)/CD(4) kinetic isotope effects are much larger for turnovers mediated by O*-* than by O*-O* site pairs, because C-H (and C-D) activation steps are required to form the * sites involved in C-H bond activation. Turnover rates for CH(4)-O(2) reactions mediated by O*-* pairs decrease with increasing Pt dispersion, as in the case of O*-O* active structures, because stronger O* binding on small clusters leads not only to less reactive O* atoms, but also to lower vacancy concentrations at cluster surfaces. As O(2)/CH(4) ratios and O* coverages become smaller, O(2) activation on bare Pt clusters becomes the sole kinetically relevant step; turnover rates are proportional to O(2) pressures and independent of CH(4) pressure and no CH(4)/CD(4) kinetic isotope effects are observed. In this regime, turnover rates become nearly independent of Pt dispersion, because the O(2) activation step is essentially barrierless. In the absence of O(2), alternate weaker oxidants, such as H(2)O or CO(2), lead to a final kinetic regime in which C-H bond dissociation on *-* pairs at bare cluster surfaces limit CH(4) conversion rates. Rates become first-order in CH(4) and independent of coreactant and normal CH(4)/CD(4) kinetic isotope effects are observed. In this case, turnover rates increase with increasing dispersion, because low-coordination Pt atoms stabilize the C-H bond activation transition states more effectively via stronger binding to CH(3) and H fragments. These findings and their mechanistic interpretations are consistent with all rate and isotopic data and with theoretical estimates of activation barriers and of cluster size effects on transition states. They serve to demonstrate the essential role of the coverage and reactivity of chemisorbed oxygen in determining the type and effectiveness of surface structures in CH(4) oxidation reactions using O(2), H(2)O, or CO(2) as oxidants, as well as the diversity of rate dependencies, activation energies and entropies, and cluster size effects that prevail in these reactions. These results also show how theory and experiments can unravel complex surface chemistries on realistic catalysts under practical conditions and provide through the resulting mechanistic insights specific predictions for the effects of cluster size and surface coordination on turnover rates, the trends and magnitude of which depend sensitively on the nature of the predominant adsorbed intermediates and the kinetically relevant steps.     

钙钛矿型氧化物负载纳米金属催化剂结构的动态调变及其催化氧化CO反应性能

研究了钛酸钡和钛酸钙担载的Ag和Pt纳米催化剂的表面结构随氧化-还原处理过程的动态变化及其对CO完全氧化反应性能的影响.发现氧化物担载的Ag催化剂在氧化处理后其催化活性较还原处理的高; X射线衍射(XRD)和X射线光电子能谱(XPS)表征结果表明,氧化处理能够提高载体表面Ag颗粒的分散度,而还原处理导致Ag颗粒的聚集,从而降低了催化氧化CO反应的活性.氧化-还原处理改变了担载Ag纳米粒子的尺寸并影响其CO氧化反应活性.与此相反,氧化物担载的Pt催化剂在还原处理后所表现出的CO氧化反应活性较氧化处理的高; 对比研究发现,氧化和还原处理后Pt纳米粒子的尺寸基本相同,但是氧化处理的样品中Pt表面物种以氧化态为主,而还原处理后Pt表面物种主要为金属态.Pt纳米粒子表面化学状态随氧化-还原处理的调变是导致表面催化活性差异的主要原因.     

Catalytic role of gold in gold-based catalysts: a density functional theory study on the CO oxidation on gold

Gold-based catalysts have been of intense interests in recent years, being regarded as a new generation of catalysts due to their unusually high catalytic performance. For example, CO oxidation on Au/TiO(2) has been found to occur at a temperature as low as 200 K. Despite extensive studies in the field, the microscopic mechanism of CO oxidation on Au-based catalysts remains controversial. Aiming to provide insight into the catalytic roles of Au, we have performed extensive density functional theory calculations for the elementary steps in CO oxidation on Au surfaces. O atom adsorption, CO adsorption, O(2) dissociation, and CO oxidation on a series of Au surfaces, including flat surfaces, defects and small clusters, have been investigated in detail. Many transition states involved are located, and the lowest energy pathways are determined. We find the following: (i) the most stable site for O atom on Au is the bridge site of step edge, not a kink site; (ii) O(2) dissociation on Au (O(2)-->2O(ad)) is hindered by high barriers with the lowest barrier being 0.93 eV on a step edge; (iii) CO can react with atomic O with a substantially lower barrier, 0.25 eV, on Au steps where CO can adsorb; (iv) CO can react with molecular O(2) on Au steps with a low barrier of 0.46 eV, which features an unsymmetrical four-center intermediate state (O-O-CO); and (v) O(2) can adsorb on the interface of Au/TiO(2) with a reasonable chemisorption energy. On the basis of our calculations, we suggest that (i) O(2) dissociation on Au surfaces including particles cannot occur at low temperatures; (ii) CO oxidation on Au/inactive-materials occurs on Au steps via a two-step mechanism: CO+O(2)-->CO(2)+O, and CO+O-->CO(2); and (iii) CO oxidation on Au/active-materials also follows the two-step mechanism with reactions occurring at the interface.     

Pt／Al_2O_3，Pd／Al_2O_3催化剂上CO氧化与表面氧脱出－恢复性能

Ｐｔ／Ａｌ_２Ｏ_３，Ｐｄ／Ａｌ_２Ｏ_３催化剂上ＣＯ氧化与表面氧脱出－恢复性能周仁贤，郑小明（杭州大学催化研究所，杭州３１００２８）关键词铂，钯，氧化铝，氧化锆，负载型催化剂，一氧化碳，氧化，氧脱附ＡＩ。Ｏ。负载的贵金属（Ｐｔ，Ｐｄ或Ｒｈ等）催化剂对有...     

STUDIES OF CATALYTIC PARTIAL OXIDATION OF METHANE TO SYNTHESIS GAS

llltcractlOllIntroductionNaturalgas.oft"hichthemajorconstituentismethane.hasbeenusedtoproduces'.nthcsisgasonalargeindustrialscaleforseveraldecades-mostl}'insteamreformingreaction(SR)t'.hichsuffersfromthedisadvantageofhighHZ/COratio(>4-whichis11otsuitablef…