Double laminated reduced graphene/Cu_2S/reduced graphene/graphene oxide nanofilms and their photoelectrochemical properties

In this work,an efficient photocatalytic material was prepared directly on Indium tin oxide(ITO)glass substrates by fabricating Cu_2 S and graphene oxide onto graphene for photoelectrochemical(PEC) water splitting.The double laminated reduced graphene/Cu_2S/reduced graphene/graphene oxide(RG/Cu_2S/RG/GO) nanofilms were characterized,and an enhanced photoelectrochemical response in the visible region was discovered.The photocurrent density of the nanofilms for PEC water splitting was measured to be up to 1.98 m A/cm~2,which could be ascribed to the followings:(i) a higher efficiency of light-harvesting because of GO coupling with Cu_2 S that could broaden the absorbing solar spectrum and enhance the light utilization efficiency;(ii) a stepwise structure of band-edge levels in the Cu_2S/GO electrode was constructed;(iii) double laminated electron accelerator(RG) was used in the Cu_2S/GO materials to get better electron-injecting efficiency.     

Self-assembled fabrication and flame-retardant properties of reduced graphene oxide/waterborne polyurethane nanocomposites

The graphite oxide (GO) was prepared from expandable graphite by the pressurized oxidation method, and samples were characterized using XRD, UV–Vis, and TEM. GO is reduced in situ emulsion using hydrazine to achieve reduced graphene oxide/waterborne polyurethane (rGO/WPU) nanocomposites. The effect of rGO content on the stability, fracture morphologies, mechanical performance, thermal degradation, and flame-retardant properties of rGO/WPU composites was investigated by zeta potential analyzer, TEM, SEM, universal testing machine, TG, and Cone Calorimeter. The results of zeta potential, TEM, and SEM analysis indicate that rGO has a good stability and dispersibility in rGO/WPU nanocomposites. The results of mechanical tests showed that the mechanical properties of rGO/WPU nanocomposites increased consistently with increasing rGO content up to 2 mass%, and TG showed that the thermostability of rGO/WPU nanocomposites decreased slightly compared to pure WPU, but carbon residue increased from 0.99 to 1.99 % when the mass fraction of rGO in WPU is 2 %. Cone Calorimeter test indicated that the flame-retardant and smoke suppression properties of rGO/WPU composites showed significant improvement compared to the WPU alone. When the mass fraction of rGO is 1 %, the total smoke release and smoke factor decreased by 25 and 38 %, respectively, compared to those of pure WPU.     

Double laminated reduced graphene/Cu2S/reduced graphene/graphene oxide nanofilms and their photoelectrochemical properties

In this work,an efficient photocatalytic material was prepared directly on Indium tin oxide（ITO）glass substrates by fabricating Cu₂ S and graphene oxide onto graphene for photoelectrochemical（PEC） water splitting.The double laminated reduced graphene/Cu₂S/reduced graphene/graphene oxide（RG/Cu₂S/RG/GO） nanofilms were characterized,and an enhanced photoelectrochemical response in the visible region was discovered.The photocurrent density of the nanofilms for PEC water splitting was measured to be up to 1.98 m A/cm²,which could be ascribed to the followings:（i） a higher efficiency of light-harvesting because of GO coupling with Cu₂ S that could broaden the absorbing solar spectrum and enhance the light utilization efficiency;（ii） a stepwise structure of band-edge levels in the Cu₂S/GO electrode was constructed;（iii） double laminated electron accelerator（RG） was used in the Cu₂S/GO materials to get better electron-injecting efficiency.     

In situ synthesis of crosslinked-polyaniline nano-pillar arrays/reduced graphene oxide nanocomposites for supercapacitors

Crosslinked-polyaniline (CPA) nano-pillar arrays adsorbed on the surface of reduced graphene oxide (RGO) sheets were synthesized by in situ solution polymerization through two steps of reduction. The electrochemical analyses demonstrated that the befittingly reduced CPA/RGO composite exhibited high performance as electrode materials for supercapacitors. The CPA/RGO composite showed very high specific capacitance of 1532 F g^?1 at a scan rate of 10 mV s^?1 or 694 F g^?1 at a current density of 2 A g^?1 in 1 M H₂SO₄ electrolyte, as well as great energy density of 61.4 W h kg^?1 at a current density of 2 A g^?1. The electrode material also had decent power density of 4 kW kg^?1 at a current density of 10 A g^?1, and good cycling stability of 92.5 % capacitance retained after 500 cycles of cyclic voltammetry at 500 mV s^?1. The neat microstructures and super electrochemical properties suggest the potential use of the composites in supercapacitors.     

Ultrafast room temperature NH3 sensing with positively gated reduced graphene oxide field-effect transistors

Reduced graphene oxide (R-GO) under a positive gate potential (n-type conductance) exhibits an instantaneous response and fast recovery for NH(3) sensing, far superior to the performance in p-mode at zero/negative gate potential. Our findings have important implications for fast, repeatable, room temperature gas detection using graphene/R-GO.     

Mixed colloidal suspensions of reduced graphene oxide and layered metal oxide nanosheets: useful precursors for the porous nanocomposites and hybrid films of graphene/metal oxide

Homogeneously mixed colloidal suspensions of reduced graphene oxide, or RGO, and layered manganate nanosheets have been synthesized by a simple addition of the exfoliated colloid of RGO into that of layered MnO(2). The obtained mixed colloidal suspensions with the RGO/MnO(2) ratio of ≤0.3 show good colloidal stability without any phase separation and a negatively charged state with a zeta (ζ) potential of -30 to -40?mV. The flocculation of these mixed colloidal suspensions with lithium cations yields porous nanocomposites of Li/RGO-layered MnO(2) with high electrochemical activity and a markedly expanded surface area of around 70-100?m(2) g(-1). Relative to the Li/RGO and Li/layered MnO(2) nanocomposites (≈116 and ≈167?F?g(-1)), the obtained Li/RGO-layered MnO(2) nanocomposites deliver a larger capacitance of approximately 210?F?g(-1) with good cyclability of around 95-97?% up to the 1000th cycle, thus indicating the positive effect of hybridization on the electrode performances of RGO and lithium manganate. Also, an electrophoretic deposition of the mixed colloidal suspensions makes it possible to easily fabricate uniform hybrid films composed of graphene and manganese oxide. The obtained films show a distinct electrochemical activity and a homogeneous distribution of RGO and MnO(2). The present experimental findings clearly demonstrate that the utilization of the mixed colloidal suspensions as precursors provides a facile and universal methodology to synthesize various types of graphene/metal oxide hybrid materials.     

Electrografting of amino-TEMPO on graphene oxide and electrochemically reduced graphene oxide for electrocatalytic applications

4-Amino-2,2,6,6-tetramethyl-1-piperridine N-oxyl (4-amino-TEMPO), an electroactive nitroxide radical, was attached to the surface of graphene oxide (GO) and electrochemically reduced graphene oxide (ERGO) modified glassy carbon electrode by a simple, rapid and green electrografting method. The electroactive interfaces were analyzed by X-ray photoelectron spectroscopy (XPS) and cyclic voltammetry (CV). The calculated surface coverage for 4-amino-TEMPO is up to 1.55 × 10^− 9 mol·cm^− 2. The modified electroactive interface exhibited excellent electrocatalytic activity towards the electro-oxidation of reduced glutathione (GSH) and hydrogen peroxide (H₂O₂).     

Ultrasonic route synthesis,characterization and electrochemical study of graphene oxide and reduced graphene oxide

Research on Chemical Intermediates - In this study, an efficient route for graphene oxide (GO) and reduced GO (RGO) synthesis was developed by using an ultrasonic probe and bath alternatively. RGO...     

Synthesis of adenine-modified reduced graphene oxide nanosheets

We report here a facile strategy to synthesize the nanocomposite of adenine-modified reduced graphene oxide (AMG) via reaction between adenine and GOCl which is generated from SOCl(2) reacted with graphite oxide (GO). The as-synthesized AMG was characterized by transmission electron microscopy (TEM), atomic force microscopy (AFM), UV-vis absorption spectroscopy, Fourier transform infrared (FT-IR) spectroscopy, Raman spectroscopy, thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS), cyclic voltammetry (CV), and galvanostatic discharge analysis. The AMG owns about one adenine group per 53 carbon atoms on a graphene sheet, which improves electronic conductivity compared with reduced graphene oxide (RGO). The AMG displays enhanced supercapacitor performance compared with RGO accompanying good stability and good cycling behavior in the supercapacitor.     

Light-responsive nanocomposites combining graphene oxide with POSS based on host-guest chemistry

A facile methodology has been proposed to construct lightresponsive nanocomposites composed of GO and POSS based on host-guest inclusion of CD/Azo. Through manipulating photo-irradiation conditions, GO and POSS moieties in GO-POSS exhibited impressive and reversible supramolecular assembly/disassembly behaviors and had remarkable effect on oxygen barrier property of PVA-coated films, which would have potential application for smart gas barrier materials in packaging.     

Photo-responsive liquid crystalline elastomer with reduced chemically modified graphene oxide

Photo-responsive liquid crystalline elastomer (LCE) with reduced chemically modified graphene oxide (RMGO) was fabricated and studied. Mesogenic groups modified graphene oxide (MGO) was prepared, reduced and characterised, then the obtained RMGO was mixed with an acrylate monomer containing a side-on mesogen, a crosslinker and a photoinitiator. After being oriented with magnetic field, well-defined LCE micropillar as photo-responsive actuators were fabricated from the mixture by the method combining soft lithography and photo-polymerisation/photo-crosslinking. The LCE micropillars showed reversible thermo-mechanical deformation during the nematic-to-isotropic transition temperature. Upon irradiating with red light (650 nm), photo-mechanical responses of the RMGO-containing LCE was demonstrated. This micron-sized LCE actuators can be used for remote photo-responsive devices.     

Controllable synthesis of titania/reduced graphite oxide nanocomposites with various titania phase compositions and their photocatalytic performance

A facile method is presented for preparing TiO2 /reduced graphite oxide(RGO) nanocomposites with phase-controlled TiO2 nanoparticles via redox reaction between the reductive titanium(Ⅲ) precursor and graphite oxide(GO),and a series of TiO2 /RGO composites with various TiO2 phase compositions were obtained.In all the titania/RGO composites,the TiO2 nanoparticles were uniformly distributed on the surface of the RGO.The TiO2 consisted of anatase phase particles in the form of square-plates with edges less than 10 nm and the rutile phase nanorods in diameters less than 10 nm.The performances of the as-prepared TiO2 /RGO composites were investigated on catalytically degrading phenol under visible light irradiation.The TiO2 /RGO composites can effectively degrade phenol under visible light irradiation,and the phase composition of TiO2 in the composites significantly influences the activities of these catalysts.     

Preparation of reduced graphene oxide electrodes treated by electron beam irradiation and their electrochemical behaviors

Research on Chemical Intermediates - We have demonstrated the preparation of reduced graphene oxide (RGO) using a two-step synthesis by a modified Hummer’s method and borohydride reduction....     

低温热处理制备石墨烯-氧化钴及其超级电容性能

采用简单的水热法制备出功能化石墨烯与CoOOH的复合物,再通过低温热处理得到功能化石墨烯-Co3O4复合材料;采用扫描电子显微镜分析了样品的形貌;测定了其电化学性能和氮气吸脱附行为.结果表明,Co3O4粒子很好地负载在石墨烯片层之间和表面;形成的复合物具有纳米孔道结构,这些纳米孔道结构有利于电解液离子的传输;而石墨烯良好的导电性有利于电子传递和提高Co3O4粒子的电容贡献值.与此同时,复合物在充放电电流密度为1A/g时的电容达320F/g,表现出优异的超电容性能.     

Realizing high-performance Zn-ion batteries by a reduced graphene oxide block layer at room and low temperatures

Rechargeable aqueous Zn-ion batteries (ZIBs) have attracted great attention due to their costeffectiveness,high safety,and environmental friendliness.However,some issues associated with poor structural instability of cathode materials and fast self-discharge hinder the further development of ZIBs.Herein,a new configuration is introduced by placing a reduced graphene oxide film as a block layer between the separator and the V_2O_5·nH_2O cathode.This layer prevents the free diffusion of dissolved active materials to the anode and facilitates the transport of Zn ion and electrons,largely improving the cyclic stability and alleviating the self-discharge.Accordingly,the optimized battery delivers a remarkable capacity of 191 mAh g~(-1) after 500 cycles at 2 A g~(-1).Moreover,a high capacity of 106 mAh g~(-1) is achieved after 100 cycles at-20℃.The strategy proposed is expected to be applicable to other electrode systems,thus offering a new approach to circumvent the critical challenges facing aqueous batteries.     

Hyperbranched polytriazine grafted reduced graphene oxide and its application

In this article, cyanuric chloride (CC) and hexamethylenediamine (HMD) as raw material, the grafting of hyperbranched polytriazine onto reduced graphene oxide surface (HBP‐RGO) was achieved by the repeated nucleophilic substitution between chlorine groups of CC and amino groups of HMD, respectively. The Fourier transform infrared, X‐ray photoelectron spectroscopic, Raman, transmission electron microscopic, thermogravimetric, and atomic force microscopic analysis showed that HBP‐RGO had been successfully prepared and the HBP had a dendritic structure on the surface of RGO. And then, the HBP‐RGO was added into polystyrene (PS) and the HBP‐RGO/PS composite was prepared by solution mixing. The micro‐morphology, thermal stability, and electrical conductivity of RGO/PS and HBP‐RGO/PS composites were characterized and compared. The scanning electron microscopic analysis showed that the HBP‐RGO can uniformly disperse in PS. Meanwhile, the HBP‐RGO/PS composite showed good thermal stability and electrical conductivity, the percolation threshold of the composites is low as 0.32 vol %. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2132–2140     

Physical and mechanical properties of graphene oxide/polyethersulfone nanocomposites

The aim of this study was to investigate physical and mechanical properties of graphene oxide (GO)/polyethersulfone (PES) nanocomposite films. The films were produced by solution casting method. The mechanical properties of composite films were evaluated by tensile test. A significant enhancement in the mechanical properties of neat PES films was obtained incorporating a small amount of GO loading (0.05–1 wt.%). The highest tensile strength was observed at 1 wt.% of GO. Comparisons were made between experimental data and the Halpin–Tsai model predictions for the tensile strength and modulus of GO/PES composites. The effect of an orientation factor on model predictions was also acquired. The hydrophilicity of the nanocomposite was evaluated by assessing contact angle and enhanced wet ability of the films was obtained with increasing the amount of GO up to 1%. The morphology of the nanocomposites was investigated using scanning electron microscopy and transmission electron microscopy and the results revealed a good dispersion of GO in the PES matrix. The thermal behavior of the composite was also studied. Thermal stability of composites was increased by adding the GO. Copyright © 2013 John Wiley & Sons, Ltd.     

Local current mapping and patterning of reduced graphene oxide

Conductive atomic force microscopy (C-AFM) has been used to correlate the detailed structural and electrical characteristics of graphene derived from graphene oxide. Uniform large currents were measured over areas exceeding tens of micrometers in few-layer films, supporting the use of graphene as a transparent electrode material. Moreover, defects such as electrical discontinuities were easily detected. Multilayer films were found to have a higher conductivity per layer than single layers. It is also shown that a local AFM-tip-induced electrochemical reduction process can be used to pattern conductive pathways on otherwise-insulating graphene oxide. Transistors with micrometer-scale tip-reduced graphene channels that featured ambipolar transport and an 8 order of magnitude increase in current density upon reduction were successfully fabricated.