Bis-Benzimidazolyl Diamide Based Fluorescent Probe for Copper(II): Synthesis, Structural and Fluorescence Studies

A new fluorescent probe based on a bis-benzimidazole diamide N ²,N ^2′-bis[(1-ethyl-benzimidazol-2-yl)methyl]biphenyl-2,2′-dicarboxamide ligand L ₁ with a biphenyl spacer group and a Copper(II) trinuclear metallacycle has been synthesized and characterized by X-ray single crystallography, elemental and spectral (FT-IR, ¹H & ¹³C NMR, UV-Visible) analysis. The fluorescence spectra of L ₁ in MeOH show an emission band centered at 300 nm. This band arises due to benzimidazolyl moiety in the ligating system. The diamide L ₁ in the presence of Cu²⁺ show the simultaneous ‘quenching’ of (300 nm) and ‘enhancement’ of (375 nm) emission band. Similar fluorescence behavior was found in water–methanol mixture (9:1). The new emission band at 375 nm is attributed to intra ligand π–π* transition of the biphenyl moiety. L ₁ exhibited high selectivity and sensitivity towards Cu²⁺ in both the medium over other common metal ions like Ni²⁺, Co²⁺, Mn²⁺, Mg²⁺, Zn²⁺, Pb²⁺ and Hg²⁺. The binding constant with Cu²⁺ was calculated by the Benesi-Hildebrand equation. Selective “off-on-off” behavior of L ₁ in methanol has also been studied. The fluorescent intensity of 375 nm bands in L ₁ enhances (turns-on) upon addition of Cu²⁺ and quenches (turn-off) upon addition of Na₂-EDTA.     

New Application of a Known Molecule: Rhodamine B 8-hydroxy-2-quinolinecarboxaldehyde Schiff Base as a Colorimetric and Fluorescent “Off-On” Probe for Copper (II)

Rhodamine B 8-hydroxy-2-quinolinecarboxaldehyde Schiff base (1) has been investigated as a colorimetric and fluorescent “off-on” probe for the recognition of Cu²⁺ in aqueous solution. Probe 1 was synthesized by condensation of rhodamine B hydrazide and 8-hydroxy-2-quinolinecarboxaldehyde, which exhibited good selectivity for Cu²⁺ among a range of biologically and environmentally important metal ions. The Cu²⁺ recognition event undergoes a Cu²⁺ promoted hydrolysis of probe 1 to release rhodamine B and the recognition process is barely interfered by other coexisting metal ions.

Synthesis and Spectroscopy of Novel Branched Fluorescent Dyes Containing Benzophenone Parts and the Possibility as Fluorescence Probes

This paper describes a new fluorescent family of branched dyes containing benzophenone unit including 4-N, N-diphenylamino-4??-phenacyl-stilbene (C1), 4,4??-di(4-benzoylphenylethylene)yl-triphenylamine (C2) and 4,4??,4??-tri(4-benzoylphenylethylene)yl-triphenylamine (C3). Benzophenone part is coupled with core through C?CC double bond. The chemical structures of the derivatives are characterized with ¹H and ¹³C nuclear magnetic resonance and elemental analysis. Strong ?ШC?? stacking interactions are discovered with the analysis of the X-ray crystallographic data of C1. The absorption maxima and emission maxima of the derivatives exhibit gradual bathochromic shift from C1 to C3. The optical density of C1, C2 and C3 are shown to be related to the number of branches. The changes of dipole moments between the excited and ground states for C1, C2 and C3 were estimated to be 4.356, 8.091 and 8.479 Derby, respectively by Lippert equation, confirming that the internal charge transfer (ICT) dominates the process of excited singlet state. The possibility as fluorescence probes of the derivatives on the estimation of what region of micelles interacting with samples was evaluated.     

Atomistic Engineering of Chemiluminogens: Synthesis,Properties and Polymerization of 2,3-Dihydro-Pyrrolo[3,4-d]Pyridazine-1,4-Dione Scaffolds

Two chemiluminescent compounds containing 2,5-di(thien-2-yl)pyrrole and pyridazine units, namely 5,7-di(thiophen-2-yl)-2,3-dihydro-1H-pyrrolo[3,4-d]pyridazine-1,4(6H)-dione (5) and 6-phenyl-5,7-di(thiophen-2-yl)-2,3-dihydro-1H-pyrrolo[3,4-d]pyridazine-1,4(6H)-dione (6), were successfully synthesized and electrochemically polymerized. The compounds have chemiluminescent properties and glow in the presence of hydrogen peroxide in basic medium. The intensity of the glow can be increased dramatically by using Fe³⁺ ions, hemin (1.0 ppm) or blood samples (1.0 ppm) as catalyst. The compounds 5 and 6 have one well-defined irreversible oxidation peak at 1.08 V and 1.33 V vs Ag/AgCl, respectively. Electrochemical polymerization of both 5 and 6 were carried out successfully by repeating potential scanning in the presence of BF₃. Et2O in an electrolyte solution of 0.1 M LiClO₄ dissolved in acetonitrile. The electronic band gaps (E_g) of the polymers P5 and P6 were found to be 2.02 eV and 2.16 eV, respectively. On the other hand, the corresponding polymers are electroactive and exhibited electrochromic features.

Open image in new window

Graphical Abstract ?

     

Micellar effects on the molecular aggregation and fluorescence properties of benzazole-derived push-pull butadienes

The absorption and fluorescence spectral behaviour of 1-(2-benzoxazolyl)-4-(p-dimethylaminophenyl)buta-1,3-diene and its benzothiazolyl analogue (abbreviated as BODB and BTDB, respectively) have been investigated in dioxane-water mixtures and micellar environments using steady-state techniques. In water, water-rich mixtures or premicellar solutions, BODB and BTDB tend to form molecular aggregates labelled as H-aggregates. These aggregates dissociate on adding surfactants forming micellized monomers. In all micellar media the fluorescence quantum yield is greatly enhanced along with a large hypsochromic shift. Also, in TX-100, CTAB and SDS both dienes show dual emission from the locally excited (LE) and intramolecular charge transfer (ICT) states. For BTDB in TX-100 and DODB in all solutions, the LE fluorescence predominates, while for BTDB in CTAB and SDS, the ICT fluorescence is the predominant. The fluorescence shifts suggest that the fluorescing molecules penetrate the core of the micellar unit in TX-100, whereas in CTAB and SDS they occupy the interfacial region. The binding constants and the micelle properties (such as polarity and CMC) have been determined using both dienes as probes.     

A New Thiosemicarbazone-Based Fluorescence “Turn-on” Sensor for Zn<Superscript>2+</Superscript> Recognition with a Large Stokes Shift and its Application in Live Cell Imaging

Selective fluorescence turn on Zn²⁺ sensor with long-wavelength emission and a large Stokes shift is highly desirable in Zn²⁺ sensing area. We reported herein the synthesis and Zn²⁺ recognition properties of a new thiosemicarbazone-based fluorescent sensor L. L displays high selectivity and sensitivity toward Zn²⁺ over other metal ions in DMSO-H₂O (1:1, v/v, HEPES 10 mM, pH = 7.4) solution with a long-wavelength emission at 572 nm and a large Stokes shift of 222 nm. Confocal fluorescence microscopy experiments demonstrate that L is cell-permeable and capable of monitoring intracellular Zn²⁺.

Open image in new window

Graphical Abstract We report a new thiosemicarbazone-based fluorescent sensor (L) for selective recognition of Zn²⁺ with a long wavelength emission and a large Stokes shift.

     

Coumarin Based Highly Selective “off-on-off” Type Novel Fluorescent Sensor for Cu<Superscript>2+</Superscript> and S<Superscript>2−</Superscript> in Aqueous Solution

Solvent free synthesis of 6,7-dihydroxy-3-(3-chlorophenyl) coumarin (CFHC) was designed and obtained by the interaction of 2-(2,4,5-trimethoxyphenyl)-1-(3-chlorophenyl)acrylonitrile with pyridinium hydrochloride in the presence of silica gel by using microwave irradiation. The characterization of CFHC was confirmed by FT-IR, ¹H, ¹³C, ¹³C–APT and 2D HETCOR spectroscopy methods. The optical behavior of CFHC towards metal ions was investigated by UV-visible and fluorescence spectroscopy. CFHC showed “on–off” type fluorescence response towards Cu²⁺ with high selectivity in aqueous solution (CH₃CN/H₂O, 9/1, v/v). Once binding with Cu²⁺, CFHC-Cu²⁺ complex also displayed high selectivity for sulfide, resulting in “off–on” type sensing of sulfide anion.

Open image in new window

Graphical abstract Visual fluorescence changes upon addition of various metal ions (5.0 eq.) to CFHC in CH₃CN/H₂O (90:10, v/v) under UV excitation (365 nm)

     

A Fluoro-Chromogenic Sensor Based on Organic Molecular Framework for Cu<Superscript>2+</Superscript> and F<Superscript>−</Superscript> in Aqueous Soluble DMSO

The 2,2′-dinaphtholazobenzene molecular framework (P) was designed, synthesized and characterized. Its absorption and fluorescence properties revealed that P is a dual sensor for copper ions (Cu²⁺) and fluoride ions (F^?) in DMSO. The colorimetric activities were clearly visible by naked eye upon the addition of the two ions. Fluorescence quenching and enhancement were observed when Cu²⁺ and F^? ions were added respectively. Density Functional Theory (DFT) calculations were carried out to provide an insight into the interaction of guest ions (Cu²⁺ and F^?) with P, and to explain how the molecular orbitals were affected.

Open image in new window

Graphical Abstract ?

     

Substituent Effect on Absorption and Fluorescence Properties of Thieno[3, 2-<Emphasis Type="Italic">c</Emphasis>]Pyridine Derivatives

New substituted thieno[3,2-c]pyridine derivatives 5 were synthesized by the reaction of 3-bromo-4-chlorothieno[3,2-c]pyridine 1 with cyclic amine 2, which further on Suzuki reaction with boronic acids 4 converted to corresponding 3-arylthieno[3,2-c]pyridine 5. Substituent R³ has predominant effect on fluorescence properties of thienopyridines. However, the electron donor amine at C₄ has no effect on fluorescence properties of thienopyridines.

Open image in new window

Graphical Abstract New thieno[3,2-c]pyridine derivatives were synthesized from 3-bromo-4-chlorothieno[3,2-c]pyridine and cyclic amines, which by on Suzuki reaction with boronic acids converted to corresponding 3-arylthieno[3,2-c]pyridine. Substituent R3 has predominant effect on fluorescence properties of thienopyridines. However, the electron donor amine at C4 has no effect on fluorescence properties of thienopyridines

     

Synthesis and Characterization of Ln(III) Complexes and its Luminescence Properties

Hexadentate ligand L and its Ln³⁺ complexes EuLCl₃ (1), TbLCl₃ (2), SmLCl₃ (3) are synthesised. All these complexes are well characterized for their photophysical properties such as luminescence lifetime decay(τ) and overall quantum yield(Φ). These complexes being water soluble, depicts their intense metal centred luminescence. Effect of pH on these complexes suggest that their emission intensities are stable in the pH range 4–9 and show their compatibility to function in the physiological pH.

Open image in new window

Graphical Abstract Normalized emisson spectra of complex 1, 2 and 3 (1x10^-5M) in HEPES Buffer at pH 7.4 (λexc=276nm)

     

A Sensitive Schiff-Base Fluorescent Chemosensor for the Selective Detection of Zn2+

A Schiff-base fluorescent probe – N, N^/-bis(salicylidene) trans 1, 2 – diaminocyclohexane (H ₂ L) was synthesized and evaluated as a chemoselective Zn²⁺ sensor. Upon treatment with Zn²⁺, the complexation of H ₂ L with Zn²⁺ resulted in a bathochromic shift with a pronounced enhancement in the fluorescence intensity in ethanol solution. Moreover, other common alkali, alkaline earth and transition metal ions failed to induce response or minimal spectral changes. Notably, this chemosensor could distinguish clearly Zn²⁺ from Cd²⁺. The stoichiometric ratio and association constant were evaluated using Benesi – Hildebrand relation giving 1:1 stoichiometry. This further corroborated 1:1 complex formation based on Job’s plot analyses.     

9, 10-Bis(8-Quinolinoxymethyl)Anthracene—A Fluorescent Sensor for Nanomolar Detection of Cu2+ with Unusual Acid Stability of Cu2+-Complex

In this work, the dipod 9,10-bis(8-quinolinoxymethyl)anthracene (1) and for comparison, monopod 9-(8-quinolinoxymethyl)anthracene (2) have been synthesized. The fluoroionophore 1 in pH 7.1 HEPES buffered CH₃CN:H₂O (4:1 v/v) solution shows quenching only with Cu²⁺ with lowest limit of detection 150 nM, amongst various metal ions. Fluoroionophore 1 could also be applied to sense Co²⁺ with lowest limit of detection 600 nM. By modulating the pH of the solution and concentration of Cu²⁺, 1 shows respective “On-Off-On” and “On-Off” fluorescent switching. The self-assembly of two Cu²⁺ ions and two molecules of fluoroionophore 1 to form closed structure [Cu₂(L)₂]⁴⁺ seems to be responsible for nanomolar sensitivity towards Cu²⁺. The combination of delayed second protonation of 1 (pK_a2?=?2.6) and stepwise protonation of [Cu₂ L ₂]⁴⁺ causes unusual stability of [Cu(LH)₂]⁴⁺ even at pH?<?2.

A Novel Series Colorimetric and Off–On Fluorescent Chemosensors for Fe3+ Based on Rhodamine B Derivative

A novel series colorimetric and off–on fluorescent chemosensors (2a, 2b, 2c) were designed and synthesized, which showed reversible and highly selective and sensitive recognition toward Fe³⁺ over other examined metal ions. Upon addition of Fe³⁺, sensors (2a, 2b) exhibit remarkably and 2c exhibits moderate enhanced absorbance intensity and color change from colorless to pink in CH₃OH–H₂O(1:1, v/v). The three compounds (2a, 2b, 2c) may therefore be applicable as rhodamine-based turn-on type fluorescent chemosensors.     

A Pyrene-based Highly Selective Turn-on Fluorescent Chemosensor for Iron(III) Ions and its Application in Living Cell Imaging

A new pyrene-based chemosensor (1) exhibits excellent selectivity for Fe³⁺ ions over a wide range of tested metal ions Ag⁺, Ca²⁺, Cd²⁺, Co²⁺, Cu²⁺, Fe²⁺, Hg²⁺, K⁺, Mg²⁺, Mn²⁺, Ni²⁺, Pb²⁺, and Zn²⁺. The binding of Fe³⁺ to chemosensor 1 produces an emission band at 507 nm due to the formation of a Py-Py* excimer that is induced by Fe³⁺-binding. The binding ratio of 1-Fe³⁺ was determined to be 1:1 from a Job plot. The association constant of 1-Fe³⁺ complexes was found to be 1.27?×?10⁴ M^?1 from a Benesi-Hildebrand plot. In addition, fluorescence microscopy experiments show that 1 can be used as a fluorescent probe for detecting Fe³⁺ in living cells.     

Theory of spatial dispersion of dielectric and magnetic constants in magnetic uniaxial gyrotropic crystals

The theory of spatial dispersion of dielectric and magnetic constants of magnetic uniaxial crystals based on generalized Maxwell’s equations D = ε?E = (ε + inγ E = ?ns ^× H and B = μ?H = (μ + inδ)H = ns ^× E with spatial dispersion parameters γ and δ is considered. Generalized Fresnel’s and polarization equations for the obtained vectors E, D, H, and B are analyzed for the wave normal direction s ⊥ C (where C is the optic axis of a crystal). The possibility of the existence of a third natural wave in a crystal is proved.     

Indole-based Fluorescent Sensors for Selective Detection of Hg2+

A series of indole-based fluorescent chemosensors 1–4 were prepared and investigated characteristick features with transition metal ions. Sensors 1 and 2 were selective for Hg²⁺ ion among a series of metal ions in H₂O–DMSO with association constants of 4.60×10⁴ and 5.90×10⁴?M^?1 and detection limits of 140 and 101.6 μM, respectively.

Aging effect in CaLaBa{Cu1???xFex}3O7???�� with 0 �� x �� 0.07 studied by M?ssbauer spectroscopy

In this work, we study the long-term aging effect caused by Fe atoms in the superconductor CaLaBa{Cu_1???xFe_x}₃O_7????? with 0 ?? x ?? 0.07. XRD confirms that this system has a YBCO-like structure. The critical temperature (T_c) is strongly affected by aging and depends on the amount of Fe in the structure. Room temperature Mössbauer spectroscopy reveals the presence of the typical species A, B?CB ??, C and new species E ?? and F. Interestingly; A, which corresponds to the Fe^3?+? atom located in the Cu(1) of the chains with spin S _z = 3/2, shows a drastic reduction which means migration to the species B, B ?? and C. Species B and B ?? correspond to the Fe^3?+? in the Cu(2) site forming planar quasi-octahedral and planar square pyramidal, while the C specie is a square pyramidal with O(5) respectively (spin S_z = 3/2 in all these cases). Aging causes loss of superconductivity in the samples with 5 and 7% of iron content.     

Study on the Selectivity of Anion Receptors Based on Similar (thio)urea Fragments

Three new selective anion receptors containing the (thio)urea binding sites were developed, Indole-3-formaldehyde phenyl-semithiocarbazone, Indole-3-formaldehyde nitrophenyl-semithiocarbazone, and Indole-3-formaldehyde nitrophenyl-semicarbazone, nominated as receptors 1, 2 and 3, respectively. Receptor 1 shows high selective recognition for F^? only, while both receptor 2 and receptor 3 containing a p-nitro group show high selective recognition for AcO^?. The high selective recognition of these receptors to anions is further investigated by X-ray crystallography diffraction, UV-vis, fluorescence analyses and ¹H NMR. Furthermore, receptor 2 changes from yellow to orange, and receptor 3 darkens when acetate is added, providing a way of detection by ‘naked-eye’.     

Some estimates for magnetic fluctuations in a turbulent medium

A new integral relationship between the fluctuations b(r, t) of a magnetic field and its mean B ₀(r, t) is derived for the steady-state magnetic field in a turbulent medium. This formula provides the estimate 〈b?curlb〉=?B ₀?curlB ₀. Simultaneously, the coefficient of amplification of the mean magnetic field α effect) is obtained: α=(η+β)B ₀? curlB ₀/B ₀ ² . The formula for α allows for a decrease in this coefficient owing to the back action of the magnetic field on the turbulent velocity field. It is shown that the Zel’dovich’s estimate 〈 b ²〉?β/η B ₀ ² for two-dimensional turbulence holds for magnetic fields at the instant the fluctuations 〈a ²〉 of the vector potential, rather than 〈b ²〉, reach a maximum. Here, η and β are the ohmic (molecular) and turbulent diffusion coefficients, respectively. This estimate is refined with allowance made for the fact that the condition for diffusion approximation itself relates the β, b, and B ₀ quantities to each other.     

A Schiff-Based Colorimetric Fluorescent Sensor with the Potential for Detection of Fluoride Ions

A simple Schiff-based colorimetric fluorescent receptor 1 was prepared. It exhibits a “turn-on-type” mode with high sensitivity in the presence of F^?. The change in color is very easily observed by the naked eye in the presence of F^?, whereas other anions do not induce such a change. Job plot indicated a 1:2 complexation stoichiometry between receptor 1 and F^?. The association constant for 1-F^? in CH₃CN was determined as 1.32*10⁵ M^?2 by a Hill plot.