Effects of ionic strength on the size and compactness of chitosan nanoparticles

In this work, chitosan nanoparticles were prepared by ionotropic gelation of chitosan with tripolyphosphate (TPP). The effects of the ionic strength of the solvent employed in the particle preparation on the average size and compactness of the particles were investigated. In addition, the effects of the chitosan concentration and the crosslinker to polymer ratio on the particle characteristics were studied. The chitosan–TPP nanoparticles were characterized by dynamic light scattering, zeta potential, and turbidity measurements. The compactness of the nanoparticles was estimated with a method based on the size of the nanoparticles and the turbidity of the nanoparticle suspension. All the investigated preparation parameters, i.e., the ionic strength of the solvent, the chitosan concentration, and the TPP to chitosan ratio, affected the particle characteristics. For instance, smaller and more compact particles were formed in saline solvents, compared to particles formed in pure water. Further, the addition of monovalent salt rendered it possible to prepare particles in the nanometer size range at a higher polymer concentration. Solvent salinity is thus an important parameter to address in the preparation of chitosan nanoparticles crosslinked with TPP.     

Preparation of chitosan nanoparticles by TPP ionic gelation combined with spray drying,and the antibacterial activity of chitosan nanoparticles and a chitosan nanoparticle–amoxicillin complex

Chitosan nanoparticles were prepared from chitosan with various molecular weights by tripolyphosphate (TPP) ionic gelation combined with a spray drying method. The morphologies and characteristics of chitosan nanoparticles were determined by TEM, FE-SEM and from their mean sizes and zeta potentials. The effect of chitosan molecular weight (130, 276, 760 and 1200 cPs) and size of spray dryer nozzle (4.0, 5.5 and 7.0 µm) on mean size, size distribution and zeta potential values of chitosan nanoparticles was investigated. The results showed that the mean size of chitosan nanoparticles was in the range of 166–1230 nm and the zeta potential value ranged from 34.9 to 59 mV, depending on the molecular weight of chitosan and size of the spray dryer nozzles. The lower the molecular weight of chitosan, the smaller the size of the chitosan nanoparticles and the higher the zeta potential. A test for the antibacterial activity of chitosan nanoparticles (only) and a chitosan nanoparticle–amoxicillin complex against Streptococcus pneumoniae was also conducted. The results indicated that a smaller chitosan nanoparticle and higher zeta potential showed higher antibacterial activity. The chitosan nanoparticle–amoxicillin complex resulted in improved antibacterial activity as compared to amoxicillin and chitosan nanopaticles alone. Using a chitosan nanoparticle–amoxicillin complex could reduce by three times the dosage of amoxicillin while still completely inhibiting S. pneumoniae.     

Modulation of surface charge, particle size and morphological properties of chitosan-TPP nanoparticles intended for gene delivery

This work investigates the polyanion initiated gelation process in fabricating chitosan-TPP (tripolyphosphate) nanoparticles in the size range of 100-250 nm intended to be used as carriers for the delivery of gene or protein macromolecules. It demonstrates that ionic gelation of cationic chitosan molecules offers a flexible and easily controllable process for systematically and predictably manipulating particle size and surface charge which are important properties in determining gene transfection efficacy if the nanoparticles are used as non-viral vectors for gene delivery, or as delivery carriers for protein molecules. Variations in chitosan molecular weight, chitosan concentration, chitosan to TPP weight ratio and solution pH value were examined systematically for their effects on nanoparticle size, intensity of surface charge, and tendency of particle aggregation so as to enable speedy fabrication of chitosan nanoparticles with predetermined properties. The chitosan-TPP nanoparticles exhibited a high positive surface charge across a wide pH range, and the isoelectric point (IEP) of the nanoparticles was found to be at pH 9.0. Detailed imaging analysis of the particle morphology revealed that the nanoparticles possess typical shapes of polyhedrons (e.g., pentagon and hexagon), indicating a similar crystallisation mechanism during the particle formation and growth process. This study demonstrates that systematic design and modulation of the surface charge and particle size of chitosan-TPP nanoparticles can be readily achieved with the right control of critical processing parameters, especially the chitosan to TPP weight ratio.     

Preparation,Characterization and Optimization of Chitosan Nanoparticles as Carrier for Immobilization of Thermophilic Recombinant Esterase

Immobilization of biologically important molecules on myriad nano-sized materials has attracted great attention. Through this study, thermophilic esterase enzyme was obtained using recombinant DNA technology and purified applying one-step His-Select HF nickel affinity gel. The synthesis of chitosan was achieved from chitin by deacetylation process and degree of deacetylation was calculated as 89% by elemental analysis. Chitosan nanoparticles were prepared based on the ionic gelation of chitosan with tripolyphosphate anions. The physicochemical properties of the chitosan and chitosan nanoparticles were determined by several methods including SEM (Scanning Electron Microscopy), FT-IR (Fourier Transform Infrared Spectroscopy) and DLS (Dynamic Light Scattering). The morphology of chitosan nanoparticles was spherical and the nanospheres’ average diameter was 75.3 nm. The purified recombinant esterase was immobilized efficiently by physical adsorption onto chitosan nanoparticles and effects of various immobilization conditions were investigated in details to develope highly cost-effective esterase as a biocatalyst to be utilized in biotechnological purposes. The optimal conditions of immobilization were determined as follows; 1.0 mg/mL of recombinant esterase was immobilized on 1.5 mg chitosan nanoparticles for 30 min at 60°C, pH 7.0 under 100 rpm stirring speed. Under optimized conditions, immobilized recombinant esterase activity yield was 88.5%. The physicochemical characterization of enzyme immobilized chitosan nanoparticles was analyzed by SEM, FT-IR and AFM (Atomic Force Microscopy).     

O-羧甲基壳聚糖纳米微粒制备及对Ni~(2+)吸附研究

将壳聚糖与氯乙酸反应,通过控制反应条件制备了取代度为0.71的O-羧甲基壳聚糖,将改性后的O-羧甲基壳聚糖与多聚磷酸钠反应,制备了粒径分布在370-710nm的O-羧甲基壳聚糖纳米微粒,透射电镜观察表明该微粒呈球状,平均粒径为450nm.在此基础上研究了O-羧甲基壳聚糖纳米微粒对工业电镀镍废水Ni~(2+)吸附性能,考察了溶液pH、Ni~(2+)起始浓度、平衡吸附时间、粒径等因素的影响,结果表明:O-羧甲基壳聚糖微粒最佳吸附条件是Ni~(2+)溶液pH为8.0、Ni~(2+)溶液起始浓度为33.28mg/ml、平衡吸附时间为0.5h、粒径较小的O-羧甲基壳聚糖纳米微粒对Ni~(2+)的吸附量要大于粒径较大的吸附量.     

Physical and chemical characterization insulin-loaded chitosan-TPP nanoparticles

The purpose of this study was to develop and characterize insulin nanoparticles systems using chitosan. Insulin-loaded nanoparticles were prepared by ionic gelation of chitosan with tripolyphosphate anions (TPP). The interactions between insulin and chitosan were evaluated by differential scanning calorimetry (DSC), thermogravimetry/derivative thermogravimetry (TG/DTG), and Fourier-transform infrared (FTIR) spectroscopy. Besides, particle size distribution, polydispersity index (PDI), zeta potential, and association efficiency (AE%) of the nanoparticles were evaluated. In general, inert nanoparticles and insulin-loaded nanoparticles showed an average size of 260.56 nm (PDI 0.502) and 312.80 nm (PDI 0.481), respectively. Both nanoparticles showed positive charge, but after insulin incorporation the zeta potential was reduced, evidencing its incorporation. Nanoparticles obtained also showed AE% around 70%, measured by high-performance liquid chromatography (HPLC). The results of FTIR, DSC, and TG/DTG corroborated the data presented suggesting that insulin was successfully encapsulated. However, drug incorporation seems to be related not only to electrostatic interactions, but also to physical process and/or adsorption phenomena.     

Microwave Assisted Synthesis of Chitosan Nanoparticles

Chitosan nanoparticles (CHN) were prepared based on ionotropic gelation between low moleculer weight chitosan and sodium tripolyphosphate (TPP) under microwave irradiation. Particle size, zeta potential, and FT-IR techniques were used for characterization of CHN. The influence of reaction time on the nanoparticle size distribution was investigated, and the results showed that the microwave irradiation method evidently decreases the reaction times and particle size over the conventional method. It was determined by the results of the zeta potential measurements that synthesized CHN under microwave irradiation clearly exhibits more homogeneous and stable dispersion.     

离子凝聚法制备负载流感疫苗的壳聚糖微球

采用三聚磷酸钠(TPP)作为离子交联剂, 应用离子凝聚法制备负载流感疫苗的壳聚糖微球. 筛选出壳聚糖起始质量分数为1%. TPP的浓度对壳聚糖微球的制备影响较大, 采用低浓度的TPP(200 μg/mL)制备的微球放置过夜均出现沉淀现象, 高浓度的TPP(800 μg/mL)在制备过程中出现絮状沉淀. 固化比影响微球的释放行为, 固化比为1∶1的微球爆炸式释放率达到90％, 固化比为1∶3的微球6 h后逐步释放, 12 h后释放率达到95％. 固化比为1∶5的微球6 h后没有明显的释放行为. 壳聚糖溶液的pH对微球的制备和释放没有显著的影响. 通过对负载流感疫苗的壳聚糖微球的制备条件和释放行为的研究结果表明, pH=5.6的壳聚糖溶液, 固化比为1∶3, TPP的质量浓度为400 μg/mL是较理想的流感疫苗壳聚糖微球的制备条件.     

Preparation of chitosan nanoparticles by spray drying,and their antibacterial activity

Chitosan nanoparticles were prepared from chitosan of different molecular weight by spray drying. The morphology of the particles was characterized by SEM, and size distribution and zeta potential were determined. The effects of chitosan solution concentration, molecular weight of chitosan, and size of the spray dryer nozzles on average size, size distribution and zeta potential of chitosan nanoparticles were investigated. The effects of chitosan nanoparticles and chitosan nanoparticles–amoxicillin complex on Staphylococcus aureus were also tested. The results showed that the average size of chitosan nanoparticles were in the range 95.5–395 nm and zeta potentials were 39.3–45.7 mV, depending on the concentration and molecular weight of the chitosan. The lower the concentration and molecular weight of the chitosan, the smaller the chitosan nanoparticles and the higher the zeta potential. Testing for antibacterial activity against S. aureus indicated that chitosan nanoparticles strongly inhibited growth of the bacteria; the minimum inhibitory concentration, 20 μg/mL, was lower than those of chitosan solution or amoxicillin. The antibacterial capacity of chitosan nanoparticles also depended on the size, zeta potential, and molecular weight of the chitosan. Complexation of chitosan nanoparticles with amoxicillin improved the antibacterial activity of amoxicillin.     

Preparation and properties of ionically cross‐linked chitosan nanoparticles

Chitosan nanoparticles were fabricated by a method of tripolyphosphate (TPP) cross‐linking. The influence of fabrication conditions on the physical properties and drug loading and release properties was investigated by transmission electron microscopy (TEM), dynamic light scattering (DLS), and UV–vis spectroscopy. The nanoparticles could be prepared only within a zone of appropriate chitosan and TPP concentrations. The particle size and surface zeta potential can be manipulated by variation of the fabrication conditions such as chitosan/TPP ratio and concentration, solution pH and salt addition. TEM observation revealed a core–shell structure for the as‐prepared nanoparticles, but a filled structure for the ciprofloxacin (CH) loaded particles. Results show that the chitosan nanoparticles were rather stable and no cytotoxicity of the chitosan nanoparticles was found in an in vitro cell culture experiment. Loading and release of CH can be modulated by the environmental factors such as solution pH and medium quality. Copyright © 2008 John Wiley & Sons, Ltd.     

Highly Sensitive Electrogenerated Chemiluminescence Isoniazid with NiO Nanoparticles‐modified Graphite Electrode

Abstract

NiO nanoparticles (NiO NPs) were prepared with chemical precipitation method and modified on the surface of vaseline‐impregnated graphite electrode with chitosan. It was found that, based on the catalysis of the NiO NPs for the chemiluminescent reaction of the ECL process, the enhancing effect of isoniazid on the weak electrogenerated chemiluminescence (ECL) signal of luminol at a NiO NPs‐chitosan modified electrode was stronger than that at a bare graphite electrode. Under the optimum experimental conditions, the relative ECL intensity was linear with isoniazid concentration over the range 3.0×10^?10～1.0×10^?6 g/ml at the NiO NPs‐chitosan modified electrode with a detection limit of 1.0×10^?10 g/ml.     

Synthesis and characterization of PEG modified N-trimethylaminoethylmethacrylate chitosan nanoparticles

Chitosan-N-trimethylaminoethylmethacrylate chloride-PEG (CS-TM-PEG) copolymers were synthesized in order to improve the solubility of chitosan in physiological environment, and enhance the biocompatibility of quaternized chitosan. The result of ¹H NMR confirmed that PEG had been combined with amino groups of quaternized chitosan. The profile of hemolysis assay showed that Chitosan-N-trimethylaminoethylmethacrylate chloride (CS-TM) copolymer exhibited hemolytic activity from 10.31% to 13.58%, while CS-TM-PEG copolymer had hemolytic activity from 4.76% to 7.05% at copolymer concentrations from 250 to 2000 μg/ml. Through PEG modification, the hemolytic activity could be reduced to a half. CS-TM-PEG copolymer-insulin nanoparticles were prepared based on ionic gelation process of positively charged copolymers and negatively charged insulin. The nanoparticles were characterized in terms of particle size, TEM, association efficiency and in vitro release. These nanoparticles were 200-400 nm in size and insulin association efficiency of optimal formulations was found up to 90%. In vitro release showed that the nanoparticles provided an initial burst release followed by a sustained release with the sensitivity of ionic strength and pH values.     

Preparation and characterization of metronidazole‐loaded chitosan nanoparticles for drug delivery application

This study describes the preparation of mucoadhesive chitosan nanoparticles containing metronidazole (MZ) intended for colon‐specific delivery. The chitosan nanoparticles were prepared by the ionic gelation method and their in vitro properties were studied. The release profiles of MZ from the nanoparticles were determined by UV–Vis absorption measurement at λ_max 278 nm. Scanning electron microscopy was used for morphology observation. The nanoparticles exhibited mucoadhesive properties, which diminished with increasing drug content. The nanoparticles with a particle size range between 200 and 300 nm exhibited excellent mucoadhesive properties. The results show that the formulated nanoparticles have succeeded in controlling the release of MZ over a 12‐hr period. In conclusion, the release of MZ was found to be dependent upon the composition of the nanoparticles, the ratio of the components and possible particle size, as well as bioadhesive ability. Copyright © 2008 John Wiley & Sons, Ltd.     

Formulation of Quaternized Aminated Chitosan Nanoparticles for Efficient Encapsulation and Slow Release of Curcumin

An effective drug nanocarrier was developed on the basis of a quaternized aminated chitosan (Q-AmCs) derivative for the efficient encapsulation and slow release of the curcumin (Cur)-drug. A simple ionic gelation method was conducted to formulate Q-AmCs nanoparticles (NPs), using different ratios of sodium tripolyphosphate (TPP) as an ionic crosslinker. Various characterization tools were employed to investigate the structure, surface morphology, and thermal properties of the formulated nanoparticles. The formulated Q-AmCs NPs displayed a smaller particle size of 162 ± 9.10 nm, and higher surface positive charges, with a maximum potential of +48.3 mV, compared to native aminated chitosan (AmCs) NPs (231 ± 7.14 nm, +32.8 mV). The Cur-drug encapsulation efficiency was greatly improved and reached a maximum value of 94.4 ± 0.91%, compared to 75.0 ± 1.13% for AmCs NPs. Moreover, the in vitro Cur-release profile was investigated under the conditions of simulated gastric fluid [SGF; pH 1.2] and simulated colon fluid [SCF; pH 7.4]. For Q-AmCs NPs, the Cur-release rate was meaningfully decreased, and recorded a cumulative release value of 54.0% at pH 7.4, compared to 73.0% for AmCs NPs. The formulated nanoparticles exhibited acceptable biocompatibility and biodegradability. These findings emphasize that Q-AmCs NPs have an outstanding potential for the delivery and slow release of anticancer drugs.     

Chitosan nanoparticle as protein delivery carrier--systematic examination of fabrication conditions for efficient loading and release

Chitosan nanoparticles fabricated via different preparation protocols have been in recent years widely studied as carriers for therapeutic proteins and genes with varying degree of effectiveness and drawbacks. This work seeks to further explore the polyionic coacervation fabrication process, and associated processing conditions under which protein encapsulation and subsequent release can be systematically and predictably manipulated so as to obtain desired effectiveness. BSA was used as a model protein which was encapsulated by either incorporation or incubation method, using the polyanion tripolyphosphate (TPP) as the coacervation crosslink agent to form chitosan-BSA-TPP nanoparticles. The BSA-loaded chitosan-TPP nanoparticles were characterized for particle size, morphology, zeta potential, BSA encapsulation efficiency, and subsequent release kinetics, which were found predominantly dependent on the factors of chitosan molecular weight, chitosan concentration, BSA loading concentration, and chitosan/TPP mass ratio. The BSA loaded nanoparticles prepared under varying conditions were in the size range of 200-580nm, and exhibit a high positive zeta potential. Detailed sequential time frame TEM imaging of morphological change of the BSA loaded particles showed a swelling and particle degradation process. Initial burst released due to surface protein desorption and diffusion from sublayers did not relate directly to change of particle size and shape, which was eminently apparent only after 6h. It is also notable that later stage particle degradation and disintegration did not yield a substantial follow-on release, as the remaining protein molecules, with adaptable 3-D conformation, could be tightly bound and entangled with the cationic chitosan chains. In general, this study demonstrated that the polyionic coacervation process for fabricating protein loaded chitosan nanoparticles offers simple preparation conditions and a clear processing window for manipulation of physiochemical properties of the nanoparticles (e.g., size and surface charge), which can be conditioned to exert control over protein encapsulation efficiency and subsequent release profile. The weakness of the chitosan nanoparticle system lies typically with difficulties in controlling initial burst effect in releasing large quantities of protein molecules.     

Influence of cetyltrimethylammonium bromide on physicochemical properties and microstructures of chitosan-TPP nanoparticles in aqueous solutions

The nanoparticles of chitosan (CS) were prepared using pentasodium triphosphate (TPP) as a crosslinking agent and the influences of cetyltrimethylammonium bromide (CTAB) on the physicochemical properties of the CS-TPP nanoparticles were first studied by laser light scattering, zeta potential, and transmission electron microscopy (TEM). The concentration played a significant role in controlling the particle size of CS and the overlap concentration c(*) was testified to be about 1.0 mg/mL. The combination of static light scattering (SLS) and dynamic light scattering (DLS) allowed us to obtain more information about the CS-TPP nanoparticles in the presence of surfactant molecules. The addition of CTAB could reduce the hydrodynamic diameter of nanoparticles effectively in the salt solutions and simultaneously increase the zeta potential of the nanoparticles. The effect of CTAB concentration on the size of CS-TPP nanoparticle was also examined. The critical micelle concentration (CMC) of CTAB was used to interpret the complicated complex formed by the polyelectrolyte and the surfactant. Finally, TEM was used to observe the CS-TPP nanoparticles, which were affected by CTAB, to verify the results obtained by light scattering.     

Experimental and model study of the formation of chitosan-tripolyphosphate-siRNA nanoparticles

Chitosan-tripolyphosphate (TPP) nanoparticles have received great interest as a drug delivery system due to the simple and mild procedure of ionic gelation and the biocompatibility of chitosan. We have studied the formation of chitosan nano- and microparticles through ionic gelation with TPP in the absence and presence of NaCl, by measuring the kinetics of formation, particle size, and zeta potential. Depending on the experimental conditions (concentrations of chitosan and TPP and the presence or absence of NaCl), particle formation displays an exponential or a sigmoidal time dependency. In order to explain the kinetics measurements, we have set up a simple kinetics model involving four different species. The model is constructed on the basis of previously proposed mechanisms of particle formation and our measurements of particle size and kinetics of formation. The model can simulate all the different time dependencies of particle formation. We also determined the effect of small interfering RNA (siRNA) on the rate of particle formation, but apparently siRNA has little or no influence on particle formation when TPP is present.     

壳聚糖对Zn2+的吸附性能研究

本文用壳聚糖对Ｚｎ＾２＋的吸附条件进行了研究,探讨了脱乙酰度,分子量,粒度大小,溶液的ｐＨ值,温度,Ｚｎ＾２＋起始浓度和不同锌盐等方面对壳聚糖吸附性能的影响。结果表明：壳聚糖对Ｚｎ＾２＋的吸附具有Ｌａｎｇｍｕｉｒ吸附特征,其吸附最佳条件是壳聚糖脱乙酰度为１００％,锌盐为硫酸锌,Ｚｎ＾２＋溶液ｐＨ值为６．０,起始浓度４－５ｍｇ／ｍｌ。     

Preparation, characterization and in vitro release study of carvacrol-loaded chitosan nanoparticles

The fabrication of carvacrol-loaded chitosan nanoparticles was achieved by a two-step method, i.e., oil-in-water emulsion and ionic gelation of chitosan with pentasodium tripolyphosphate. The obtained particles possessed encapsulation efficiency (EE) and loading capacity (LC) in the ranges of 14-31% and 3-21%, respectively, when the initial carvacrol content was 0.25-1.25 g/g of chitosan. The individual particles exhibited a spherical shape with an average diameter of 40-80 nm, and a positively charged surface with a zeta potential value of 25-29 mV. The increment of initial carvacrol content caused a reduction of surface charge. Carvacrol-loaded chitosan nanoparticles showed antimicrobial activity against Staphylococcus aureus, Bacillus cereus and Escherichia coli with an MIC of 0.257 mg/mL. The release of carvacrol from chitosan nanoparticles reached plateau level on day 30, with release amounts of 53% in acetate buffer solution with pH of 3, and 23% and 33% in phosphate buffer solutions with pH of 7 and 11, respectively. The release mechanism followed a Fickian behavior. The release rate was superior in an acidic medium to either alkaline or neutral media, respectively.     

改性壳聚糖抗菌纳米微球的制备

以卤胺化合物为抗菌基团对壳聚糖接枝改性, 并制备成纳米微球, 提高壳聚糖的抗菌性能. 通过核磁共振和紫外光谱对改性壳聚糖进行结构表征; 探讨了改性壳聚糖浓度、 三聚磷酸钠浓度及两者体积比对纳米微球的形成和粒径分布的影响; 测定了纳米微球的抗菌性能. 结果表明, 在改性壳聚糖浓度为4.0 mg/mL, 三聚磷酸钠浓度为2.0 mg/mL时, 形成的纳米微球形态稳定, 粒径分布均匀, 氯化后的纳米微球可在30 min内杀灭10⁷ cfu(cfu为单位体积中的菌落总数)的金黄色葡萄球菌和大肠杆菌, 表现出优异的抗菌性能.