高功率激光多程放大系统光束传输的计算分析

 报道了高功率激光多程放大系统光束传输的模拟程序, 该程序考虑了放大介质的增益分布、增益饱和、增益恢复系数、介质吸收损耗、B积分以及光阑和空间滤波器等光学元件对激光传输和放大的影响, 并给出了典型的计算实例。     

高功率多程激光放大系统的优化设计

利用光束传输模拟程序对高功率多程激光放大系统进行了优化设计, 所用方法和所得结论对高功率激光放大系统的设计有应用意义。     

高功率多程激光放大系统的优化设计

 利用光束传输模拟程序对高功率多程激光放大系统进行了优化设计, 所用方法和所得结论对高功率激光放大系统的设计有应用意义。     

高功率激光多程放大系统中的快速波形预测

对高功率激光多程放大系统中脉冲强度的三维时空变化特性进行了详细的数值分析,理论计算表明具有一定时空分布的光束在放大过程中会产生复杂的时空演化畸变,给脉冲功率的整形预测带来了一定的难度.提出了输入输出积分能量曲线拟合的方法,实现对多程放大系统输入脉冲波形的高精度反演预测,对于方波和复杂多台阶波形输出都能得到很好的预测结果,方波预测相对功率偏差低于0.032%,三台阶脉冲相对功率偏差为0.78%,另外还实现了更为复杂Haan脉冲的反演预测,相对功率偏差为0.13%.该方法不仅精度高,而且计算快速、适用性很强.     

多程激光放大系统光传输程序的改进和校核

 报道了高功率激光多程放大系统光束传输程序的改进。在该程序中全面考虑了影响激光传输和放大的诸多重要因素。给出典型的计算实例,并用劳仑兹·利弗莫尔国家实验室的实验和模拟数据对程序进行了系统校核,证实了该改进程序的正确性和优点。     

包含波面校正的四程放大系统的准直问题研究

为了解决高功率激光系统中, 尤其是多程放大系统中波前畸变校正和光路准直之间的相互干扰问题, 针对包含自适应光学系统的四程放大系统, 利用菲涅耳衍射积分理论, 建立了310 mm×310 mm大口径光束的四程传输模型, 采用坐标扩展变换的方法解决了传统计算中同时需求近、远场高分辨率带来的计算量过大问题; 基于此模型, 比较了质心法、圆拟合法和纯相位匹配滤波等三种图像处理算法对存在波面差的光束的远场中心的处理精度; 分析了波面校正对焦斑位置的影响; 本文内容为四程放大系统准直调整方案的优化提供了重要依据. 关键词： 光束准直 坐标扩展变换 自适应光学 四程放大     

激光系统三维放大计算模型研究

基于激光脉冲在增益介质中的放大过程建立了三维放大模拟计算模型,该模型将自由空间传输与光线追迹放大相结合。在增益介质内抽运储能分布具有三维特点、离轴多程放大结构等复杂情况下,该模型能真实模拟放大后输出光束的近场分布。利用该三维放大模型针对一个12程激光二极管抽运钕玻璃放大系统进行模拟计算,计算结果准确地反映了输出光束近场分布。在此模拟结果的基础上能进一步优化多程放大光路。     

LD侧泵浦Nd：YAG板条双程功率放大器初步研究

 对二极管激光侧泵浦Nd：YAG板条双程功率放大器进行了初步的研究,给出了激光器的数值模拟结果,建立了二极管侧面泵浦Nd:YAG板条激光主振荡-多程放大(MOPA)系统;在100Hz重复频率时,实验获得单脉冲能量为51.9mJ的输出,光束质量M ²小于2,脉冲能量起伏小于2%, 实验结果与数值计算结果相符合。     

多程放大系统主放大级光学优化设计

应用系统像差控制和鬼点追迹理论，采用分段优化、整体校合、整体优化的思想，对采用离轴多程放大的高功率固体激光装置的主放大级部分进行了系统光学优化设计.并将设计的结果与优化前的系统进行了对比，为今后此类系统的光学设计提供了参考. 关键词： 离轴多程放大 光学设计 鬼点追迹 系统像差     

多程放大中激光脉冲交叠放大的物理建模与计算方法

建立了多程放大中激光脉冲在增益介质中交叠放大的物理模型, 并提出相应的计算方法. 物理模型中考虑了脉冲前后沿对增益介质中反转粒子数的共同消耗. 研究认为模型在延时系下的数据递推方式无法求解交叠放大问题. 通过建立新的时空坐标系, 解决了交叠放大过程的数值求解问题. 基于此物理模型和计算方法, 模拟计算了双程放大时脉冲时间波形与腔镜位置的关系. 关键词： 物理模型 放大 腔镜 增益饱和     

双向抽运钛宝石啁啾脉冲激光多通放大的理论与实验研究

以双向抽运方式为基点，提出了新的、更接近实际的多通放大计算模型与方法，系统地计算分析了共焦腔双向抽运钛宝石激光放大器的放大特性，进而采用新的放大构型完成了啁啾脉冲多通放大．将实验结果与理论计算进行了比较，两者符合得很好．这种放大器大大减少了放大次数并彻底避免了再生腔必需的诸多光电元件 关键词：     

The inverse problem of a laser amplifier

Starting from the recurrence relations of a multipass amplifier, an iterative computing method has been presented to solve the inverse problem of a laser amplifier, i.e., to find the initial fluence and pulse shape for a given output pulse and amplifier parameters. Numerical calculations have been performed to illustrate the results.     

Beam overlapping in a multipass Ti:sapphire amplifier based on a parabolic mirror

According to laser beam transporting in a multipass Ti:sapphire amplifier based on a parabolic mirror, the influential factors to induce astigmatism are analyzed. The beam waists of the laser beam transporting in the multipass amplifier are calculated by ABCD law in sagittal and tangential planes, respectively, and are compared with each other. Our analyses of these influential factors provide valuable data to optimize this design of multipass Ti:sapphire amplifier, and our experimental results of getting Gaussian beam from such a kind of amplifier confirmed our theoretical analyses.     

A differential detection scheme for Faraday rotation spectroscopy with a color center laser

A differential detection scheme to reduce source noise and to improve sensitivity based upon the Faraday effect has been developed. This method is particularly useful in connection with low-power, high-noise laser sources and multipass arrangements where a degradation of polarization quality is substantial. The theoretical background of the differential method is developed. It is tested with magnetic rotation signals from transitions of stable species with low modulation sensitivity and signals from free radicals.     

有序混合光束和迷宫式多次反射光学系统

本文给出有序混合光束结构和多程光学系统的具体考虑,并指出它们在多波长高激发态激光光谱学研究和其它领域中的意义.     

Highly-efficient 20 TW Ti:sapphire laser system using optimized diverging beams for laser wakefield acceleration experiments

We developed a highly efficient and compact Ti:sapphire multipass amplifier that uses divergent seed beams to generate 20 TW/40 fs laser pulses with a repetition rate of 10 Hz. The laser system consists of a mode-locked oscillator, a regenerative amplifier, and a multipass power amplifier. The thermal lensing effect is very important in this system, especially in the multipass amplifier, as it limits the conversion efficiency. In order to compensate the thermal lensing effect, we calculated the optimum divergence of the seed beam and used the result for the multipass amplifier, where the thermal focusing is taken into account. In this way, we achieved a very high conversion efficiency of 41%, which is close to the theoretical limit. The laser system was then used with a capillary gas cell to generate stable high-energy electron beams with electron energies of about 150 MeV and a beam divergence of 4 ± 1 mrad. In this paper, details of the laser system development and experimental results for electron generation are presented.     

A high energy, long pulse Nd: Yag laser multipass cell for raman scattering diagnostics

A new multipass cell design is proposed for use with high energy, pulsed lasers and for application to spontaneous Raman scattering diagnostics. Using a Nd: YAG laser pulse of 8 ns, 500 mJ at 1.06 μm, the frequency-doubled 60 mJ pulse is trapped in the multipass cell for 550 ns until it decays to 10% of its initial energy. This gives a resultant gain of 42 over the single pass case and corresponds to a multipass cell efficiency of 97.7% per pass.