Cyanide Biodegradation by Trichoderma harzianum and Cyanide Hydratase Network Analysis

Cyanide is a poisonous and dangerous chemical that binds to metals in metalloenzymes, especially cytochrome C oxidase and, thus, interferes with their functionalities. Different pathways and enzymes are involved during cyanide biodegradation, and cyanide hydratase is one of the enzymes that is involved in such a process. In this study, cyanide resistance and cyanide degradation were studied using 24 fungal strains in order to find the strain with the best capacity for cyanide bioremediation. To confirm the capacity of the tested strains, cyano-bioremediation and the presence of the gene that is responsible for the cyanide detoxification was assessed. From the tested organisms, Trichoderma harzianum (T. harzianum) had a significant capability to resist and degrade cyanide at a 15 mM concentration, where it achieved an efficiency of 75% in 7 days. The gene network analysis of enzymes that are involved in cyanide degradation revealed the involvement of cyanide hydratase, dipeptidase, carbon–nitrogen hydrolase-like protein, and ATP adenylyltransferase. This study revealed that T. harzianum was more efficient in degrading cyanide than the other tested fungal organisms, and molecular analysis confirmed the experimental observations.     

Cyanide und Halogene

Ohne Zusammenfassung     

Microdetermination of Cyanide

Abstract

A volumetric procedure is described for the micro-determination of cyanide. Small amounts of cyanide can be estimated even in presence of chloride if it is present in the electrolytic bath. N-Bromosuccinimide (NBS) is used to quantitatively oxidized cyanide to cyanate. The end point is reached when the rose red color of the bordeaux red is changed to distinct yellow. From 1–6 mg. of cyanide were analyzed with an average relative standard deviation of about 0.66%.     

Einfache und komplexe Cyanide

Ohne Zusammenfassung     

Adsorption of Zinc and Cyanide from Cyanide Effluents on Anionic Ion-exchange Resin

The adsorption of zinc and cyanide from cyanide effluents onto strong and weak basic anion exchange resins was studied in a batch adsorption system. Factors influencing the adsorption rates such as resin selection, resin amounts, contact time and temperature were studied and scanning electron microscopy-energy disperse spectroscopy(SEM-EDS) was used in the analysis. The present study shows that the adsorption capacity of resin 201×7 is better than that of resin 301. The adsorption process was relatively fast and came to equilibrium after 60 min. The kinetic data were analyzed with three models and the pseudo-second-order kinetic model was found to agree with the experimental data well. The equilibrium data could also be described well by Langmuir isotherm model. Thermodynamic parameters such as enthalpy change(ΔH⁰), free energy change(ΔG⁰) and entropy change(ΔS⁰) were calculated and the adsorption process was spontaneous and endothermic.     

Chemiluminescence Determination of Cyanide Ions

It was found that alkaline solutions of luminol exhibit chemiluminescence in the presence of p-nitrobenzaldehyde (p-NBA), hemin, and cyanide ions. Air oxygen dissolved in the solutions is an essential component of the process. The kinetics of luminol chemiluminescence in the presence of p-NBA, hemin, and cyanide ions indicates the catalytic nature of the process. A scheme was proposed for the series of reactions resulting in chemiluminescence and generated by superoxide radicals formed in the p-NBA-catalyzed reaction between hemin-activated air oxygen and hydrated p-NBA species. A procedure was developed with a determination limit of (1.0 ± 0.3) × 10^?7 mg/mL (n = 5, P = 0.95) for cyanide ions.     

Nitryl Cyanide,NCNO2

The elusive nitryl cyanide, NCNO₂, has been synthesized and characterized. It was prepared in good yield, isolated by fractional condensation, characterized by NMR and vibrational spectroscopy, and studied by theoretical calculations. Nitryl cyanide holds promise as a high energy density material (HEDM) and might also prove useful as a HEDM building block. The simplicity and inherent stability of nitryl cyanide, together with the known multitude of nitriles in interstellar space, suggest that the compound might also be a potential candidate for observations in atmospheric and interstellar chemistry.     

Nitryl Cyanide,NCNO2

The elusive nitryl cyanide, NCNO₂, has been synthesized and characterized. It was prepared in good yield, isolated by fractional condensation, characterized by NMR and vibrational spectroscopy, and studied by theoretical calculations. Nitryl cyanide holds promise as a high energy density material (HEDM) and might also prove useful as a HEDM building block. The simplicity and inherent stability of nitryl cyanide, together with the known multitude of nitriles in interstellar space, suggest that the compound might also be a potential candidate for observations in atmospheric and interstellar chemistry.     

基于氰化物对辣根过氧化物酶的抑制作用测定氰化物的研究

基于氰化物对辣根过氧化物酶(HRP)的抑制作用,将辣根过氧化物酶电极用于水中的微量氰化物的测定。酶电极制作中,先在金电极表面自组装一层半胱胺单层膜,再用戊二醛交联HRP。采用这种酶固定化方法,电极在6.0×10-5～4×10-3mol/LH2O2的浓度范围呈线性关系。探讨了工作电位、介体浓度、pH值、底物浓度等实验条件对酶电极性能及抑制过程中响应电流的影响,考察了电极的重现性、干扰及使用寿命。电极检测氰化物的线性范围为0.3～20μg/mL,检出限为100ng/mL,将电极用于水中CN-回收率的测定,结果良好。     

Silver Cyanide Complexes of Heterocyclic Thiones

Silver(I) cyanide complexes of various thiones (imidazolidine-2-thione, diazinane-2-thione and their derivatives) have been prepared and characterized by elemental analysis, i.r. and n.m.r. (¹H, ¹³C, ¹⁵N and ¹⁰⁷Ag) spectroscopy. It appears from the i.r. data that six out of the ten complexes are nonionic [>C=S—Ag—CN] while the remaining four exist as ionic species [Ag(>C=S)₂]⁺[Ag(CN)₂]^– in the solid state. An upfield shift in the ¹³C-n.m.r. and downfield shifts in the ¹H-, ¹⁵N- and ¹⁰⁷Ag-n.m.r. spectra are consistent with the sulfur coordination to silver(I). The n.m.r. data shows that the [>C=S—AgCN] complexes are stable in solution and do not undergo redistribution.     

Cyanide by Prussian Blue Spot Formation

Abstract

A simple quantitative test for cyanide is described. Cyanide is released as the hydrocyanic acid and conducted through a prepared disk to form a prussian blue spot. This spot is visually or instrumentally compared to standard spots. Two μg of cyanide can be detected by this method.     

A Sensitive Colorimetric Reagent for the Determination of Cyanide and Hydrogen Cyanide in Various Environmental Samples

A sensitive reagent system is proposed for the determination of cyanide and hydrogen cyanide in various environmental samples. The method is based on the conversion of cyanide into cyanogen bromide followed by its reaction with pyridine to form glutaconic aldehyde. The glutaconic aldehyde so formed is coupled with p‐aminoacetophenone forming yellow‐orange polymethine dye measured at 445 nm. The colour system obeys Beer's law in the range of 0.01–0.16 ppm of cyanide inaqeous phase and 0.002–0.03 ppm in extracting system. The molar absorptivity and Sandell's sensitivity were found to be 6.51 × 10⁵ l mol^?1 cm^?1 and 0.0001 μg cm^?2, respectively. The method has been successfully applied for the determination of cyanide in air, industrial effluent, biological samples, and in the pesticide acrylonitrile.     

Cyanide Hydratase Modification Using Computational Design and Docking Analysis for Improved Binding Affinity in Cyanide Detoxification

Cyanide is a hazardous and detrimental chemical that causes the inactivation of the respiration system through the inactivation of cytochrome c oxidase. Because of the limitation in the number of cyanide-degrading enzymes, there is a great demand to design and introduce new enzymes with better functionality. This study developed an integrated method of protein-homology-modelling and ligand-docking protein-design approaches that reconstructs a better active site from cyanide hydratase (CHT) structure. Designing a mutant CHT (mCHT) can improve the CHT performance. A computational design procedure that focuses on mutation for constructing a new model of cyanide hydratase with better activity was used. In fact, this study predicted the three-dimensional (3D) structure of CHT for subsequent analysis. Inducing mutation on CHT of Trichoderma harzianum was performed and molecular docking was used to compare protein interaction with cyanide as a ligand in both CHT and mCHT. By combining multiple designed mutations, a significant improvement in docking for CHT was obtained. The results demonstrate computational capabilities for enhancing and accelerating enzyme activity. The result of sequence alignment and homology modeling show that catalytic triad (Cys-Glu-Lys) was conserved in CHT of Trichoderma harzianum. By inducing mutation in CHT structure, MolDock score enhanced from −18.1752 to −23.8575, thus the nucleophilic attack can occur rapidly by adding Cys in the catalytic cavity and the total charge of protein in pH 6.5 is increased from −6.0004 to −5.0004. Also, molecular dynamic simulation shows a stable protein-ligand complex model. These changes would help in the cyanide degradation process by mCHT.     

一种无氰化物测定血红蛋白的分光光度法

在pH 2.3～5.2的酸度条件下,红色的氯磺酚S能与血红蛋白作用,生成蓝色离子缔合物,其最大吸收波长为637 nm,摩尔吸收系数(为2.8×105L·mol-1·cm-1;最小吸收波长为560 nm,摩尔吸收系数(为3.5×105 L·mol-1·cm-1,线性范围均为0～100 mg/L.优化了反应条件,测定了主要分析参数并探讨了初步反应机理.该法克服了使用KCN剧毒和高白细胞、高球蛋白血症干扰的弱点.用于临床人血液中血红蛋白含量的测定,结果满意.     

Kinetic Parameters of Gold Dissolution in Cyanide Solutions: The Effect of Complex Cyanide Ions of Mercury

The kinetics of the gold dissolution in cyanide solutions is studied at constant values of the coverage () of the gold surface by mercury atoms. The constancy of is ensured by maintaining an identical value of the duration (t) of contact of electrode with solution (after renewing its surface by cutting off a thin surface layer of metal) at a potential of –1.3 V, at which the discharge of mercury ions is limited by their diffusion to the electrode. At t = const kinetic dependences of the gold dissolution process correspond to the Tafel equation. Effective values of exchange current i ₀, transfer coefficient , and reaction order by cyanide ions P are determined. With increasing value of their magnitude increases from values 10^–5 A cm^–2, 0.1, and 0.17 that are characteristic of purely cyanide solutions (composition 0.1 M KCN, 0.1 M KOH, and 0.01 M KAu(CN)₂) to i ₀ 2 × 10^–4 A cm^–2, = 0.46, and P 1 at t = 270 s. These results are compared with the data obtained earlier during similar investigations in solutions containing thallium, lead, and bismuth. Common and individual features in the behavior of mercury-containing electrolytes are revealed. It is shown that the possible mechanism of the acceleration of the gold dissolution process in the presence of catalytically active atoms, which had been proposed in these works, may be used also for explaining the action of mercury atoms on this process.