用分散聚合反应制备SiO2/PS包覆粒子（英）

采用分散聚合反应制备了纳米SiO2/PS包覆粒子,并对其结构进行了表征。首先在超声波场中用表面活性剂对纳米SiO2粒子进行亲油化处理,然后在氮气保护下利用超声波的分散、粉碎、活化、引发等多重作用,在实现纳米SiO2粒子在反应介质中纳米分散的同时,引发苯乙烯单体在纳米SiO2粒子表面发生分散聚合反应,制备出纳米SiO2/PS包覆粒子。最后,采用SEM,TEM,FTIR,XPS等测试手段对纳米SiO2/PS包覆粒子进行了表征,测试结果表明,PS实现了对纳米SiO2的包覆,形成了核壳包覆结构。     

用分散聚合反应制备SiO2/PS包覆粒子（英）

采用分散聚合反应制备了纳米SiO2/PS包覆粒子,并对其结构进行了表征。首先在超声波场中用表面活性剂对纳米SiO2粒子进行亲油化处理,然后在氮气保护下利用超声波的分散、粉碎、活化、引发等多重作用,在实现纳米SiO2粒子在反应介质中纳米分散的同时,引发苯乙烯单体在纳米SiO2粒子表面发生分散聚合反应,制备出纳米SiO2/PS包覆粒子。最后,采用SEM,TEM,FTIR,XPS等测试手段对纳米SiO2/PS包覆粒子进行了表征,测试结果表明,PS实现了对纳米SiO2的包覆,形成了核壳包覆结构。     

Ag纳米粒子聚集体的SiO2包覆及其SERS效应

为实现表面增强拉曼散射（SERS）信号的快速检测分析,报道了一种简单的利用SiO₂包覆对巯基苯甲酸（4MBA）修饰的Ag纳米粒子形成核壳结构纳米颗粒SERS标记物的方法。通过调控溶液中硝酸钠的浓度来控制4MBA-Ag的聚集程度,获得不同的“热点”效应,然后利用SiO₂包覆实现对聚集体的固定。扫描电镜结果证实此种方法非常有效。该体系中SERS的信号强度依赖于4MBA-Ag的聚集程度。该研究结果有助于实现聚集体SERS标记物在生物成像、检测和传感等方面的应用。     

丹酰氯SiO2纳米发光标记物的制备

通过合成丹酰氯的荧光单体硅酯前驱物,采用油包水的反相微乳液法,以丹酰氯的荧光单体硅酯前驱物为核材料,成功地制备了丹酰氯的荧光纳米颗粒,克服了传统方法制备核壳荧光纳米颗粒中存在的荧光染料泄漏问题.通过透射电子显微镜表征该纳米粒子呈球形,大小均匀,直径为40nm左右.所制得纳米颗粒荧光性质稳定,受外界环境的影响小,且潜在生物亲和性,是一种新型的荧光标记物.     

掺杂C60的SiO2气凝胶的制备及荧光特性研究

利用“化学掺杂”方法，制备掺杂C₆₀-SiO₂气凝胶，对掺杂C₆₀-SiO₂气凝胶的红外吸收光谱、飞行时间质谱的测试表明C₆₀分子被成功地掺入SiO₂气凝胶中．室温条件下，在Ar⁺激光（488nm）激发下，观察到掺杂C₆₀-SiO₂气凝胶有很强的可见发光现象，发光峰位较纯C₆₀发光明显蓝移 关键词：     

SiO2@Gd2O3:Eu3+纳米核壳颗粒的制备及其荧光特性研究

近年来,稀土荧光纳米材料在生物影像、传感检测等方面的应用已成为生物医学领域研究热点。稀土离子具有发光性质优异、材料本身毒性较低等特征,然而稀土氧化物纳米颗粒密度大、分散性差以及容易聚沉的问题限制了其作为新型荧光标记探针的应用。二氧化硅因其良好的尺寸调节性、化学稳定性、生物相容性等特点,已经在生物医学领域获得广泛应用。采用溶胶-凝胶法制备了具有核壳结构的SiO₂@Gd₂O₃:Eu³⁺纳米核壳颗粒,使其在获得优质光致发光特性的同时,改善稀土氧化物纳米颗粒密度大、分散性差以及容易聚沉等问题。采用透射电子显微镜(TEM)、X射线衍射(XRD)、稳态荧光光谱仪等研究了SiO₂@Gd₂O₃:Eu³⁺纳米核壳颗粒的形貌结构以及光致发光特性。     

半导体聚合物纳米荧光探针的制备及生物应用研究进展

半导体聚合物作为功能有机高分子材料被广泛应用于有机光电子器件领域的研究。近年来由半导体聚合物构成的荧光纳米粒子引起了广泛的研究兴趣。这类新型纳米探针具有光学吸收截面大、量子效率高、辐射跃迁速率快、光稳定性好等特性,在荧光成像和生物传感等领域获得了重要应用。本文简要概述了近年来半导体聚合物纳米粒子的研究进展,包括其光物理性质、表面功能化以及在细胞标记、体内成像、生物传感、单粒子示踪、药物输送和光动力学疗法等领域的应用。     

InP/SiO2纳米复合膜的微观结构和光学性质

应用射频磁控共溅射方法在石英玻璃和抛光硅片上制备了InP/SiO₂复合薄膜,并在几种条件下对这些薄膜进行退火.X射线光电子能谱和卢瑟福背散射实验结果表明,复合薄膜中InP和SiO₂的化学组分都大体上符合化学计量配比.X射线衍射和激光喇曼谱实验结果都证实了复合薄膜中形成了InP纳米晶粒.磷气氛保护下的高温(520℃)退火可以消除复合薄膜中残存的In和In₂O₃并得到了纯InP/SiO₂纳米复合薄膜.实验观察到了室温下纳米复合薄膜的明显的光学吸收边蓝移现象和光学非线性的极大增强 关键词： InP 纳米晶粒 微观结构 光学性质     

n+-Si与p-Si衬底上含纳米硅的SiO2膜电致发光

对于Au/富Si-SiO₂/p-Si和Au/富Si-SiO₂／n⁺-Si这两种结构，研究并比较了它们的电致发光特性．对于前者，当正向偏压大于4V时发射红光，而加反向偏压时不发光；对于后者，加正向偏压不发光，而当反向偏压大于3.5V时发射红光．着重讨论了Au/富Si-SiO₂/n⁺-Si的电致发光机制 关键词：     

镶嵌在SiO2薄膜中纳米GaAs颗粒的Raman散射研究

纳米GaAs颗粒通过射频磁控共溅法成功地被镶嵌在SiO_2薄膜中.通过不同基片温度下沉积的薄膜的Raman光谱观察到了明显的声子限域效应.其结果表明:当沉积时基片温度低于200℃时,X射线衍射和Raman散射均表现出非晶结构特征;当基片温度升高到300℃时,薄膜内的GaAs具有闪锌矿结构,同时其结构振动纵光学声子模对应的Raman散射峰将从非晶散射峰中分离出来,但同大块材料相比,该峰表现出明显的宽化和红移;随着沉积时的基片温度进一步提高,其宽化和红移相应地减小. 关键词：     

聚电解质包覆的铕(Ⅲ)配合物@SiO2荧光纳米粒的合成与性质

以二苯甲酰甲烷(DBM)、邻菲罗琳(phen)和丙烯酸(AA)为配体,制备了铕的配合物Eu(Ⅲ)(DBM)2-(phen)(AA).利用St(o)ber法合成了SiO2纳米粒.通过超声辅助,将脂溶性的强荧光铕配合物吸附到SiO2纳米粒上,再包覆阳离子聚电解质聚二烯丙基二甲基氯化铵(PDAC)和阴离子聚电解质聚丙烯酸(P...     

Preparation and Fluoroimmunoassay Application of New Red-Region Fluorescent Silica Nanoparticles

This is the first report on the preparation and utilization of a novel red-region fluorescent dye (tetracarboxy aluminum phthalocyanine) doped silica nanoparticles. In these nanoparticles, the tetracarboxy aluminum phthalocyanine molecules were covalently bound to silica matrix to protect the dye leaking from nanoparticles in bio-applications. The surface of the nanoparticles was modified by amino groups and easily bioconjugated with goat anti-human IgG antibody. By employing these nanoparticles as fluorescent probe, a sensitive fluoroimmunoassay method has been developed for the determination of trace level of human IgG. The calibration graph for human IgG was linear over the range of 0–500 ng mL⁻¹ with a detection limit of 1.6 ng mL⁻¹. Compared with the corresponding system using free AlC₄Pc as a probe for determining human IgG, the sensitivity of the proposed system was notably increased. The method was applied to the analysis of human IgG in human sera with satisfactory results.     

Optical Properties of Ag and Au Nanoparticles Dispersed within the Pores of Monolithic Mesoporous Silica

The optical absorption of silver and gold nanoparticles dispersed within the pores of monolithic mesoporous silica upon annealing at elevated temperatures has been investigated. With decreasing particle size, the surface plasmon resonance position of the particles blue-shifts first and then red-shifts for silver/silica samples, but only red-shifts for gold/silica samples. This size evolution of the resonance position is completely different from that previously reported for fully embedded particles. We assume a local porosity at the particle/matrix interface, such that free surface of particles within the pores may be in contact with ambient air, and present a two-layer core/shell model to calculate the optical properties. These calculations also consider deviations from the optical constants of bulk matter to account for corresponding effects below about 10 nm particle size. From the good agreement between experimental results and model calculations, we conclude a peculiar particle/ambience interaction dominating the size evolution of the resonance. Because of the difference of core electron structure, the relative importance of the effects of local porosity and free surface, respectively, are different for silver and gold. For silver, the effect of the local porosity is stronger, but for gold the opposite is found.     

Functionalized Ultrabright Fluorescent Mesoporous Silica Nanoparticles

The problem of functionalization of recently reported ultrabright fluorescent mesoporous silica nanoparticles while preserving their fluorescent brightness is solved. This is a serious issue because of the open geometry of mesoporous channels and physical encapsulation of fluorescent dye inside those channels. Amine modification of mesoporous nanoparticles is described to preserve the brightness comparable to that of earlier reported ultrabright silica nanoparticles. Scaling to 40 nm sized particles, amine‐functionalized nanoparticle have fluorescent brightness equivalent to the one of 630 free rhodamine 6G (R6G) dye molecules in water. To demonstrate further most challenging functionalization, which relies on using organic‐solvent‐based chemistry, folic acid conjugation is developed. Two different methods are used to conjugate folites to the amine functionalities. Both methods result in a decrease of fluorescence intensity, which can nonetheless still be called ultrabright. The brightness can drop to either 310 or 80 R6G dye molecules per particle of nominal diameter of 40 nm.     

Engineering the Internal Structure of Magnetic Silica Nanoparticles by Thermal Control

Calcination of hydrated iron salts in the pores of both spherical and rod‐shaped mesoporous silica nanoparticles (NPs) changes the internal structure from an ordered 2D hexagonal structure into a smaller number of large voids in the particles with sizes ranging from large hollow cores down to ten nanometer voids. The voids only form when the heating rate is rapid at a rate of 30 °C min^?1. The sizes of the voids are controlled reproducibly by the final calcination temperature; as the temperature is decreased the number of voids decreases as their size increases. The phase of the iron oxide NPs is α‐Fe₂O₃ when annealed at 500 °C, and Fe₃O₄ when annealed at lower temperatures. The water molecules in the hydrated iron (III) chloride precursor salts appear to play important roles by hydrolyzing Si? O? Si bonding, and the resulting silanol is mobile enough to affect the reconstruction into the framed hollow structures at high temperature. Along with hexahydrates, trivalent Fe³⁺ ions are assumed to contribute to the structure disruption of mesoporous silica by replacing tetrahedral Si⁴⁺ ions and making Fe? O? Si bonding. Volume fraction tomography images generated from transmission electron microscopy (TEM) images enable precise visualization of the structures. These results provide a controllable method of engineering the internal shapes in silica matrices containing superparamagnetic NPs.     

Sensitized Fluorescence of Silver Nanoparticles in the Presence of Pyrene

The fluorescence of pyrene adsorbed onto the surface of the cetyltrimethylammonium-coated silver nanoparticles was studied. Pyrene molecules adsorbed on freshly prepared silver particles were found to be in close proximity to silver surface thus providing the possibility of energy transfer from excited pyrene to silver cores of the particles. In that case along with the expected fluorescence of pyrene we observed the fluorescence of the silver nanoparticles induced by the excited pyrene molecules. In due course the restructuring of the cetyltrimethylammonium layer resulted in moving of pyrene molecules away from silver surface and simultaneous disappearance of the silver nanoparticles fluorescence band. These data strongly support the recent hypothesis of fluorophore-plasmon coupled emission.     

掺杂香豆素6的杂化纳米颗粒的制备及荧光性能研究(英文)

采用一种再沉淀-封装法制备了掺杂香豆素6(C6)的杂化荧光纳米颗粒,并通过SEM和DLS对其进行了形貌和粒径大小表征。在450 nm光激发下,制备的C6掺杂纳米颗粒表现出绿色荧光。通过比较光致发光光谱随掺杂浓度的变化,得出C6掺杂纳米颗粒的浓度猝灭是因为分子间能量转移而非C6分子聚集所致。另外,由于所选聚合物基质材料PS和PMMA分子结构的区别,导致PS-基质和PMMA-基质的纳米颗粒的光谱形状不同。C 6分子在PS-基质的纳米颗粒中处于两种不同的微环境,所以发射峰较宽;PMMA是线性分子,PMMA-基质的纳米颗粒中只存在一种局域环境,所以发射峰较窄。高的掺杂浓度会超过纳米颗粒对C6分子的负载能力,从而导致C6分子在水溶液中聚集。