Simultaneous extraction of polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans and coplanar polychlorinated biphenyls from contaminated soil using pressurized liquid extraction

Pressurized liquid extraction (PLE) was studied for simultaneous extractions of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/PCDFs), and of coplanar polychlorinated biphenyls (Co-PCBs) from a tightly bounded condition in the soil matrix. Temperatures were maintained at 175 and 200 degrees C, respectively, and two or three static cycles for single PLE with toluene and acetone/n-hexane were studied using a certified reference material to compare the effects of those conditions on recoveries. A single PLE with two static cycles at 150 degrees C and the repeated single PLE (additional PLE) were reference methods. Satisfactory recoveries were not obtained using tested single PLE (2,3,7,8-substituted PCDD/PCDFs and Co-PCBs average, average (avg.) 79-103%), but they were achieved using additional PLE (acetone/n-hexane, avg. 115-128%; toluene, avg. 111-132%). In addition, these methods and additional PLE of the reference method using acetone/n-hexane were not markedly different (avg. 123-128%). That fact suggests that the use of mixed solvents and additional PLE were more important factors than temperatures and static cycles of single PLE for quantitative and simultaneous extractions of those compounds from the soil.     

Pressurized liquid extraction of polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans and coplanar polychlorinated biphenyls from contaminated soil

Extraction solvents for pressurized liquid extraction (PLE) used to extract polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans (PCDD/PCDFs), and coplanar polychlorinated biphenyls (Co-PCBs) from contaminated soil were investigated. The PCDD/PCDFs and Co-PCBs in Certified Reference Material: CRM 0422 (Forest soil) were extracted using toluene, n-hexane, acetone, acetone/toluene and acetone/n-hexane (1:1, v/v). Soxhlet extraction was the reference method. Results demonstrated that PLE using mixed solvents produced better analyte recoveries than the single solvents. However, these results were lower than those for Soxhlet extraction. Additional extraction cycles using mixed solvents achieved better recovery results. Mixed solvents and several extraction cycles were necessary for satisfactory extraction of more tightly bound PCDD/PCDFs and Co-PCBs from soil.     

Selective pressurized liquid extraction of polychlorinated biphenyls from fat-containing food and feed samples influence of cell dimensions, solvent type, temperature and flush volume

Sulphuric acid impregnated silica was used for the lipid free extraction of polychlorinated biphenyls from fat containing food and feed matrices using pressurized liquid extraction on a Dionex ASE300, with 34 mL cells. Data were compared to a previous publication where extractions had been performed on a Dionex ASE200, with 33 mL cells. Four different fat/fat retainer ratios (FFRs) were tested (0.100, 0.075, 0.050 and 0.025) at 50 and 100 degrees C using n-pentane, n-hexane or n-heptane as extraction solvent. The best results were obtained with a FFR of 0.025 when applying a temperature of 100 degrees C. Both n-pentane and n-heptane were capable of replacing n-hexane as extraction solvent. A flush volume of 60% was sufficient as suggested in US Environmental Protection Agency Method 3545. The applicability of the method was demonstrated for naturally contaminated fish meal as well as various spiked and certified materials.     

Thermochemical properties of gaseous and liquid polychlorinated biphenyls, polychlorinated dibenzo-p-dioxins, and dibenzofurans

The analysis and systematization of the known and calculation of the unknown thermochemical characteristics (the standard enthalpy of formation, the standard entropy, the heat capacity, etc.) of widespread hazardous isomers of gaseous and liquid compounds of polychlorinated biphenyls, polychlorinated dibenzo-p-dioxins, and polychlorinated dibenzofurans are carried out.     

Selective pressurized liquid extraction of polychlorinated biphenyls in sediment.

A selective pressurized liquid extraction procedure (SPLE) was developed for a fast determination of polychlorinated biphenyls in sediment. The final method was performed at 100 degrees C with heptane/dichloromethane (90:10, v/v) as extraction solvent for 2x5 min. Sulfuric acid impregnated silica was placed downstream of the sample in the extraction cell to remove interfering components. This simultaneous extraction/clean-up was performed in 20 min, with an average congener recovery of 92% compared to a classical 24 h Soxhlet methodology and 2 h of external manual clean-up.     

Analysis of polychlorinated dibenzo-p-dioxins, dibenzofurans and dioxin-like polychlorinated biphenyls in vegetable oil samples by gas chromatography-ion trap tandem mass spectrometry

Gas chromatography coupled to ion trap tandem mass spectrometry (CG-MS-MS) has been evaluated for the analysis of polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) and dioxin-like polychlorinated biphenyls (dl-PCBs) in vegetable oil samples containing different concentration levels (0.2-6 pg WHO-TEQ g(-1) for both PCDD/Fs and dl-PCBs) of the 29 toxic congeners of PCDD/F and dioxin-like PCBs. The effect of potential interfering compounds such as polychlorinated naphthalenes (PCNs), polychlorinated biphenyls (PCBs) and polychlorinated diphenylethers (PCDEs) on the quantification of mono-ortho PCBs has been investigated. In addition, the influence of the clean-up procedure on the final determination by CG-MS-MS was studied, showing that the quality of the results depends to a great extent on this analytical step. Quality parameters have been established and good precisions (CV: 3-19%) and low limits of detection for PCDD/Fs (0.04-0.20 pg g(-1) oil) and dl-PCBs (0.08-0.64 pg g(-1) oil) were obtained. The method was validated by a comparison of the CG-MS-MS results with those obtained by GC-HRMS.     

Fast clean-up for polychlorinated dibenzo-p-dioxins, dibenzofurans and coplanar polychlorinated biphenyls analysis of high-fat-content biological samples

A fast clean-up procedure for the low level analysis of polychlorinated dibenzo-p-dioxins. polychlorinated dibenzofurans and coplanar polychlorinated biphenyls in highly fatty biological matrices using high capacity disposable multi-layer silica columns is presented. Results were compared with gel permeation chromatography for removal of lipids. Analytical criteria such as recovery rates, repeatability, reproducibility and robustness are evaluated through a broad range of biological matrices and reference materials analysis. The final proposed procedure for the complete analysis, including pressurized liquid extraction, Power-Prep system clean-up and GC-high-resolution MS analysis requires only 48 h, and allows the simultaneous preparation of up to 10 samples.     

Advances in analytical techniques for polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans and dioxin-like PCBs

Analytical techniques for the determination of polychorinated dibenzo-p-dioxins (PCDD), polychlorinated dibenzofurans (PCDF) and dioxin-like PCBs (DLPCB) are reviewed. The focus of the review is on recent advances in methodology and analytical procedures. The paper also reviews toxicology, the development of toxic equivalent factors (TEF) and the determination of toxic equivalent quantity (TEQ) values. Sources, occurrence and temporal trends of PCDD/PCDF are summarized to provide examples of levels and concentration ranges for the methods and techniques reviewed.     

Comparison of gas chromatography-ion-trap tandem mass spectrometry systems for the determination of polychlorinated dibenzo-p-dioxins, dibenzofurans and dioxin-like polychlorinated biphenyls

Two gas chromatography-mass spectrometry systems equipped with an ion-trap mass analyzer working in tandem mode (GC-MS-MS) were evaluated for the determination of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) and dioxin-like polychlorinated biphenyls (PCBs) in food samples. The performance of the two ion-trap instruments, which dispose of an external ion source (ThermoFinnigan GCQ/Polaris) and internal ionization (Varian Saturn 2,200), have been compared in terms of linearity, repeatability, limit of detection and long-term precision. Both instruments provided similar run-to-run and day-to-day precisions, ranging from 2% to 8% and between 2% and 13%, and instrumental limits of detection between 0.09 and 0.36 pg injected for PCDD/Fs and from 0.03 to 0.09 pg injected for dioxin-like PCBs. Although both instruments seem to be suitable for food analysis, only the use of external ionization allowed to achieve reliable results for PCDD/F determination at concentrations close to the maximum residue levels established by the EU for foods. Internal ionization provides high limits of detection (from 10- to 30-fold higher) and worse precision (RSD, 14-43%). In contrast, for dioxin-like PCBs both instruments allowed to obtain excellent results with precisions lower than 15%.     

Development of a reference material for routine performance monitoring of methods measuring polychorinated dibenzo-p-dioxins, polychlorinated dibenzofurans and dioxin-like polychlorinated biphenyls

Matrix–matched environmental certified reference materials (CRMs) are one of the most useful tools to validate analytical methods, assess analytical laboratory performance and to assist in the resolution of data conflicts between laboratories. This paper describes the development of a lake sediment as a CRM for polychorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and dioxin-like polychlorinated biphenyls (DLPCBs). The presence of DLPCBs in the environment is of increased concern and analytical methods are being developed internationally for monitoring DLPCBs in the environment. This paper also reports the results of an international interlaboratory study involving thirty-five laboratories from seventeen countries, conducted to characterize and validate levels of a sediment reference material for PCDDs, PCDFs and DLPCBs.     

Development of a reference material for routine performance monitoring of methods measuring polychorinated dibenzo-p-dioxins, polychlorinated dibenzofurans and dioxin-like polychlorinated biphenyls

Matrix-matched environmental certified reference materials (CRMs) are one of the most useful tools to validate analytical methods, assess analytical laboratory performance and to assist in the resolution of data conflicts between laboratories. This paper describes the development of a lake sediment as a CRM for polychorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and dioxin-like polychlorinated biphenyls (DLPCBs). The presence of DLPCBs in the environment is of increased concern and analytical methods are being developed internationally for monitoring DLPCBs in the environment. This paper also reports the results of an international interlaboratory study involving thirty-five laboratories from seventeen countries, conducted to characterize and validate levels of a sediment reference material for PCDDs, PCDFs and DLPCBs.     

Determination of polychlorinated biphenyls in biota samples using simultaneous pressurized liquid extraction and purification

In order to reduce time and cost of analysis, a new pressurised liquid extraction method that automatically and rapidly achieves quantitative and selective (i.e., lipid-free) extraction of polychlorinated biphenyls (PCBs) in biota tissues was optimized. It consists of on-line clean-up by inclusion of sorbents in the extraction cell. The freeze-dried sample is dispersed with Florisil and loaded in the extraction cell containing an extra amount of Florisil. The extraction is performed under mild conditions using 55 ml of a dichloromethane-pentane (15:85) mixture, a temperature of 40 degrees C, a static extraction time of 10 min and two extraction cycles. The Florisil retains coextracted lipids from the matrix, and the extract, after pre-concentration, is clean enough for direct injection into GC-MS and GC-electron-capture detection (ECD). Quantitative recoveries (from 90 to 106%) are obtained for both native and spiked PCB congeners in samples with a high lipidic content (up to 42% dry mass, in spoonbill eggs). The reproducibility of replicate extractions was better than 11% relative standard deviation. Method detection limits were in the ranges of 0.001-0.004 and 0.002-0.07 ng g(-1) dry mass for GC-ECD and GC-MS-MS, respectively. The method was validated using the standard reference material SRM 2974 (a mussel tissue) from the US National Institute of Standards and Technology, compared to Soxhlet and matrix solid-phase dispersion extraction methods, and used to evaluate the contamination by PCBs in bivalves from South of Spain.     

Fractionation of polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans and planar polychlorinated biphenyls by high performance liquid chromatography on a pyrenyl-silica column

Analytical procedures for the determination of polychlorinated dibenzo-p-dioxins (PCDD), polychlorinated dibenzofurans (PCDF) and non-ortho polychlorinated biphenyls (PCB) require a fractionation step to separate PCDD/F from planar PCB and the bulk of PCB. An HPLC method which achieves the separation of the bulk of PCB (0–6 mL of hexane), mono-ortho PCB (6–8 mL of hexane), non-ortho PCB (8–15 mL of hexane) and PCDD/F (15–50 mL of toluene) on a PYE column (2-(1-pyrenyl) ethyldimethylsilylated silica gel) in a single step without the use of backflush as other authors proposed was developed. The method shows a good accuracy and precision and it is linear in the range studied, e.g from 5.8 to 2420 pg injected in HPLC for TCDD/F, from 28.8 to 12100 pg for PeCDD/F, HxCDD/F, HpCDD/F and from 57.6 to 24200 pg for OCDD/F. It has been successfully applied to the analysis of technical mixtures of PCB (Aroclors), a pine wood sample and several water samples of different origins. Received: 29 November 1998 / Revised: 25 February 1999 / Accepted: 3 March 1999     

Fractionation of polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans and planar polychlorinated biphenyls by high performance liquid chromatography on a pyrenyl-silica column

Analytical procedures for the determination of polychlorinated dibenzo-p-dioxins (PCDD), polychlorinated dibenzofurans (PCDF) and non-ortho polychlorinated biphenyls (PCB) require a fractionation step to separate PCDD/F from planar PCB and the bulk of PCB. An HPLC method which achieves the separation of the bulk of PCB (0–6 mL of hexane), mono-ortho PCB (6–8 mL of hexane), non-ortho PCB (8–15 mL of hexane) and PCDD/F (15–50 mL of toluene) on a PYE column (2-(1-pyrenyl) ethyldimethylsilylated silica gel) in a single step without the use of backflush as other authors proposed was developed. The method shows a good accuracy and precision and it is linear in the range studied, e.g from 5.8 to 2420 pg injected in HPLC for TCDD/F, from 28.8 to 12100 pg for PeCDD/F, HxCDD/F, HpCDD/F and from 57.6 to 24200 pg for OCDD/F. It has been successfully applied to the analysis of technical mixtures of PCB (Aroclors), a pine wood sample and several water samples of different origins. Received: 29 November 1998 / Revised: 25 February 1999 / Accepted: 3 March 1999     

Separation of seventeen 2,3,7,8-substituted polychlorinated dibenzo-p-dioxins and dibenzofurans and 12 dioxin-like polychlorinated biphenyls by comprehensive two-dimensional gas chromatography with electron-capture detection

Comprehensive two-dimensional gas chromatography (GC x GC) with electron-capture detection (ECD) has been optimized for the separation of seventeen 2,3,7,8-substituted polychlorinated dibenzo-p-dioxins and dibenzofurans and 12 dioxin-like polychlorinated biphenyls, with emphasis on the selection of the first- and second-dimension, commercially available, columns. When eight second-dimension columns were subsequently combined with a 100% methylpolysiloxane stationary phase (DB-1) in the first dimension to create orthogonal conditions, a complete separation of all congeners with different TEF values was obtained with two column combinations, DB-1 x VF-23 and DB-1 x LC-50. When other types of first-dimension columns were used (and orthogonality was partly sacrificed), a DB-XLB column combined with 007-65HT, VF-23 and LC-50 was found to provide a complete separation of all 29 priority congeners. Next, the potential of these three column combinations for real-life analysis was preliminarily studied. With a spiked and fractionated milk extract, DB-XLB x LC-50 was found to be the most powerful column combination, because of the good separation of the 29 priority congeners from each other as well as from the matrix constituents. Quantitative performance (close to three-order linearity; LODs, 30-150 fg injected; R.S.D.s, 1.5-6.5% (n = 10)) was satisfactory.     

Polychlorinated biphenyls,dibenzo-p-dioxins and dibenzofurans in soil samples from airport areas of Croatia

Levels and patterns of polychlorinated biphenyls (PCBs) were studied in surface soil samples collected in the coastal part of Croatia within and surrounding four different airports and in the vicinity of two partially devastated electrical transformer stations. The compounds accumulated from air-dried soil samples by multiple ultrasonic extraction with an n-hexane?:?acetone 1?:?1 mixture were analysed by capillary gas chromatography with electron capture and ion-trap detection. PCBs were quantified against a standard Aroclor 1242/Aroclor 1260 mixture and a standard mixture of 17 individual PCB congeners (IUPAC No.: 28, 52, 60, 74, 101, 105, 114, 118, 123, 138, 153, 156, 157, 167, 170, 180, and 189). The mass fractions of total PCBs in 18 soil samples collected within the airport premises ranged from 3 to 41?327?µg/kg dry weight (dw) (median: 533?µg/kg?dw), and those in 21 samples collected at a distance ranging from several metres to 5?km away from the airport fence, from <1 to 39?µg/kg?dw (median: 5?µg/kg?dw). The highest PCB levels were determined in soils along the airport aprons where the aircrafts were serviced and refuelled. The PCB pattern was very similar to technical Aroclor 1260 in all airport soils. The PCB pattern in 22 soils collected in the vicinity of electrical transformer stations was dominated by congeners contained in Aroclor 1242. These soils contained 7 to >400?µg/kg?dw of total PCBs. One highly PCB-contaminated airport soil sample was analysed for polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs). With an international toxic equivalent (I-TEQ) of 9.7?ng/kg?dw, the airport soil contamination was within values typical for urban and rural areas, and the congener patterns gave no clear indication for PCBs as the only source of PCDDs/PCDFs.     

Trace analysis of polychlorinated dibenzo-p-dioxins, dibenzofurans and WHO polychlorinated biphenyls in food using comprehensive two-dimensional gas chromatography with electron-capture detection

Trace analysis of 2,3,7,8-polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs) and the 12 WHO-PCBs (four non-ortho and eight mono-ortho congeners that have been assigned toxic equivalence factors, TEFs, by the World Health Organisation) was conducted by comprehensive two-dimensional gas chromatography with a micro electron-capture detector (GC x GC-microECD). Four food matrices (fish oil from herring, spiked cows' milk, vegetable oil and an eel extract) were analysed by two GC x GC laboratories, and four GC-HRMS laboratories generated reference values. The two GC x GC laboratories used different column combinations for separating the target analytes. For the first dimension, non-polar DB-XLB and VF-1 columns were used, and for the second dimension, an LC-50 liquid crystalline column with unique selectivity for planar compounds. The congener-specific and total toxic equivalence (TEQ) data obtained using DB-XLB x LC-50 were in good agreement with results obtained by the GC-HRMS laboratories. The WHO-PCB data obtained with the VF-1 x LC-50 combination was also good, but the PCDD/F concentrations were sometimes overestimated due to matrix interferences. GC x GC-microECD using DB-XLB x LC-50 seems to fulfil the European Community requirements of a screening method for PCDD/F and WHO-PCB TEQ in food.     

An improved clean-up strategy for simultaneous analysis of polychlorinated dibenzo-p-dioxins (PCDD), polychlorinated dibenzofurans (PCDF), and polychlorinated biphenyls (PCB) in fatty food samples

The study and extension of a simple automated clean-up method for polychlorinated dibenzo-p-dioxins (PCDD) and polychlorinated dibenzofurans (PCDF) to a broad range of polychlorinated biphenyls (PCB) is described. The isolation of seven PCDD, ten PCDF, and three coplanar PCB (cPCB) is extended to eight monoortho substituted PCB and seven so-called "marker PCB" (Aroclor 1260) for fatty food samples. This enables quantification of 35 compounds - including all congeners with a WHO toxic equivalent factor (TEF)--in a single extraction and single purification step. The chromatographic behaviour of mono-ortho PCB and marker PCB on a variety of adsorbents, including basic alumina, has been studied. Partitioning of analytes through multi-column sequences is described and correlated with their structural and electronic properties, by use of molecular modelling calculations. The fractionation process available with the Power-Prep automated clean-up system enables rapid independent analysis of the different groups of compounds. Gas chromatography with high resolution mass spectrometry (GC-HRMS) is used for the PCDD/F and cPCB fraction and quadrupole ion-storage tandem in time mass spectrometry (GC-QISTMS) for analysis of the remaining PCB. A comparison study was performed on quality-control samples and real fatty food samples to evaluate the robustness of the new strategy compared with a reference method. On the basis of this simultaneous clean-up, a rapid simplified strategy for PCDD/F and selected PCB analysis determination is proposed for fatty food samples.     

杭州市冬季大气气溶胶PM2.5中二恶英和多氯联苯的污染特征

2014年1月在杭州市选择5个点位采集大气颗粒物PM_2.5样品,采用同位素稀释高分辨气相色谱/高分辨质谱测定PM_2.5中的二恶英（PCDD/Fs）和多氯联苯（PCBs）,对PM_2.5的污染状况以及PM_2.5中PCDD/Fs和PCBs的污染水平及分布特征进行了研究。PM_2.5的质量浓度范围为85~168 μg/m³,PM_2.5污染较重,但与2004年同期相比明显降低。PM_2.5中PCDD/Fs的毒性当量（TEQ）为0.277~0.488 pg I-TEQ/m³,明显高于2004年同期采集样品。颗粒物中PCDD/Fs以八氯代二苯并-对-二恶英（OCDD）为主,毒性当量主要贡献者为2,3,4,7,8-五氯代二苯并呋喃（2,3,4,7,8-PeCDF）。PM_2.5中PCBs的质量浓度范围为2.9~8.1 pg/m³,二恶英类多氯联苯（DL-PCBs）的毒性当量范围为2.6~6.1 fg WHO-TEQ/m³,污染较低。PCBs在颗粒物中分布以PCB-28为主,但对毒性当量贡献最大的为PCB-126。PCDD/Fs和PCBs的气-固分配特征表现为PCDD/Fs主要分布于颗粒物中,而PCBs主要分布于气相中。     

Rapid and cost-effective analysis of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans in soil, fly ash and sediment certified reference materials using pressurized liquid extraction with an integrated carbon trap

Pressurized liquid extraction with an integrated carbon trap (PLE-C) has recently been developed for fast and efficient analysis of polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) in food and feed. The method has also been tested, but not verified, for use on more complex soil samples, such as soil, sediment and fly ash. Hence, the primary aim of this study was to verify that PLE-C can produce reliable data for PCDDs/PCDFs in various abiotic matrixes. A second aim was to find a replacement for the previously used AX21 active carbon that is currently not commercially available. The performance of the PLE-C was evaluated using both single congener concentrations and toxic equivalency potentials (TEQ-pot) of three (soil, sediment and fly ash) certified reference materials. The results clearly show that PLE-C can be used for abiotic samples and that a commercially available carbon (Norit SA 4PAH HF) can replace the AX-21 carbon in the carbon trap. The TEQ-pot values obtained for the soil and sediment samples were within the uncertainty limits of the corresponding certified values, as were the determinations of single congener concentrations. PLE-C therefore has great potential for determination of PCDDs/PCDFs in soil and sediment samples. The TEQ-pot result for the fly ash was slightly lower than the certified TEQ-pot value, but it is still within the uncertainty limits of the certified value. Out of the single congener concentrations all but four (out of 17) agreed well with the values. Hence, PLE-C may potentially be used also for fly ash—after slight modifications. The integrated PLE-C and cleanup procedure is less labour-intensive than traditional methods such as Soxhlet extraction followed by a multistep cleanup, and consumes smaller quantities of ultrapure solvents than the commonly used Power-Prep system. In addition, PLE-C is capable of larger sample throughputs than the conventional methods. Thus, PLE-C is a promising alternative to the currently used sample preparation procedures for dioxins in abiotic samples. Figure PLE with integraded carbon trap for rapid PCDD/Fs analysis Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.