Making Solid‐Phase Peptide Synthesis Greener: A Review of the Literature

To date, the synthesis of peptides is concurrent with the production of enormous amounts of toxic waste. DMF, CH₂Cl₂, and NMP are three of the most toxic organic solvents used in chemical synthesis and are the most common solvents used for peptide synthesis. Additionally, concerns about the hepatotoxicity caused by exposure to DMF and from the toxic and allergenic nature of additives used in peptide synthesis necessitates the need for a green, environmentally friendly, and safer protocol for peptide synthesis. This review summarizes the current literature on green solid‐phase peptide synthesis successes and challenges encountered. The review concludes with suggestions for future research towards a simple and efficient green peptide synthesis protocol.     

Wallichanol类天然产物ABC环系合成研究

Wallichanol是一类具有独特桥环结构的二萜天然产物.以2-甲基-1,3-环己二酮作为起始原料,通过高立体选择性的Diels-Alder反应和金催化的炔烃碳环化反应构建Wallichanol的ABC三环核心骨架,共七步路线,总收率为42%.该合成工作为Wallichanol类天然产物全合成奠定了研究基础.     

离子热法合成分子筛的研究进展

离子热法是以离子液体或低共熔混合物为介质的一种新型的分子筛合成方法, 它提供了一种离子态的独特合成环境, 为合成新型分子筛及研究分子筛的生成机理提供了机会. 本文综述了离子热法在分子筛合成方面取得的一些进展, 包括合成方法的创新、合成机理的研究、新材料的合成以及新型催化剂的制备等, 并展望了其发展前景.     

N-to-C solid-phase peptide and peptide trifluoromethylketone synthesis using amino acid tert-butyl esters

Solid-phase peptide synthesis in the N-to-C direction, opposite to the classical C-to-N direction of peptide synthesis, provides the synthetically versatile C-terminal carboxyl group for further modification into C-terminally modified peptide mimetics. These are of general interest as potential bioactive agents, particularly as protease inhibitors. Elaboration of peptide mimetics on the solid-phase would facilitate synthesis of peptide mimetic combinatorial libraries. This report describes an effective strategy for solid-phase inverse peptide synthesis based on readily available amino acid tert-butyl esters. The potential of this approach for peptide mimetic synthesis is demonstrated by the solid-phase synthesis of two peptide trifluoromethylketones.     

High pressure synthesis of polyimides and related polymers

This paper reviews our current studies on the high pressure synthesis of polyimides and related condensation polymers. After a brief introduction of the solid-state thermal synthesis of polyimides starting from nylon-salt-type monomers, the paper deals with the high pressure synthesis of polyimides, the preparation of polyimide-silica hybrid materials by the combination of the above synthetic method for polyimides and the sol-gel reaction for silica synthesis, and the high pressure synthesis of polybenzoxazoles and addition-type polyaminoimide.     

亚砜亚胺类化合物的合成及应用研究进展

亚砜亚胺(Sulfoximine)类化合物是一类重要的杂原子取代化合物,引起了人们的广泛关注.综述了近十年来亚砜亚胺类化合物的研究进展,包括该类化合物的合成及在不对称催化领域中的应用、含有亚砜亚胺的生物活性小分子合成和天然产物全合成.并对发展趋势和应用前景做了展望.     

Synthesis of mesoporous silicas of controlled pore wall thickness and their replication to ordered nanoporous carbons with various pore diameters

A synthesis strategy for the systematic control of the pore wall thickness has been developed for the mesoporous silicas with 2-D hexagonal order using ionic and nonionic surfactant mixtures. The mesoporous silicas have been used as templates for the synthesis of 2-D hexagonally ordered mesoporous carbons with controlled pore diameters. The synthesis strategy and results are useful not only for tailoring the properties of the mesoporous materials but also for extending our insights into the synthesis mechanism.     

SAPO分子筛的合成及影响因素的研究进展

本文综述了SAPO分子筛的主要合成方法,包括水热合成法、气相晶化法、液相晶化法、微波合成法、变温陈化法、超声合成法、程序升温法等方法.讨论了反应物的组成、模板剂、酸碱度、介质、晶化温度、晶化时间等因素对SAPO分子筛合成的影响.最后对SAPO分子筛合成方法进行了展望.     

Enantioselective total synthesis of (+)-digitoxigenin

An enantioselective total synthesis of (+)-digitoxigenin is described. This total synthesis is accomplished in a convergent manner using two chiral fragments prepared via the catalytic asymmetric intramolecular cyclopropanation and baker’s yeast mediated reduction developed by us, respectively. This convergent synthesis would be useful for preparing some new derivatives of digitoxigenin for SAR studies and could be applied for the total synthesis of other cardenolides left unprepared.     

Solid Phase Peptide Synthesis

The last two decades have been an era of rapid progress in peptide research. This era was begun by the work of Sanger on the amino acid sequence determination of insulin and by du Vigneaud on the structure determination and synthesis of oxytocin. This period has seen impressive progress in the structure elucidation and synthesis of many peptides of natural origin and of great biological significance, as well as in methods for sequence determination and chemical synthesis of peptides [1–4]. Perfection of techniques and instruments for automatic determination of the amino acid sequence of peptides and proteins has made possible a greatly broadened understanding of genetics and evolution as well as the more chemical areas of mechanism of action of enzymes and hormones, and physical chemistry of peptides and proteins. Effective methods of peptide synthesis are crucial to progress in this area, because only by synthesis can adequate amounts of important peptides be made available for chemical, biological, and physical studies, as well as for exploration of the structure-function aspects of biological molecules. In general, progress in peptide synthesis has lagged far behind that in amino acid sequence determination. This is not surprising since effective peptide synthesis requires a very sophisticated system of selectively removable protecting groups for functions of the amino acids involved, and the synthesis of a large heteropolytner of defined sequence requires near perfection of each one of the many steps of the assembly. The classical approach to peptide synthesis, using standard organic chemical methods of synthesis and purification of intermediates, has yielded impressive results during these two decades. However, the special problems associated with the assembly of large molecules make staggering investments in time and materials necessary for the synthesis of large peptides or proteins by classical methods.     

Direct Synthesis of Hydrogen Peroxide from Hydrogen and Oxygen Using Tailored Pd Nanocatalysts: A Review of Recent Findings

Direct synthesis of hydrogen peroxide from hydrogen and oxygen is being actively studied as an alternative to the current manufacturing process. The direct synthesis route has not reached the point of commercialization because of low yields, but significant effort is being spent on enhancing the productivity. With advances in computational capacity, simulation studies based on DFT calculations now offer directions for catalyst improvement, but such modifications can only be realized through the application of nanoparticle synthesis techniques that allow for nanocrystal morphology and size control and unique immobilization. To date, there have only been a small number of studies on such nanoparticles with size and crystallographic homogeneity for the direct hydrogen peroxide synthesis. According to our knowledge no other group has systematically investigated application of nanoparticles in direct synthesis of hydrogen peroxide, and thus included in this review are primarily previous studies conducted by our group. In this review, we discuss the utilization of nanotechnology for the synthesis of Pd catalysts and its effect on the direct synthesis of hydrogen peroxide, and we suggest a direction for future studies.     

Synthesis of eudistomin C and E: improved preparation of the indole unit

An improved synthesis of the indole unit, a key intermediate for eudistomin C, was established utilizing Makosza's indole synthesis. A concise total synthesis of eudistomin E was achieved on the basis of the improved synthesis.     

(R)-α-硫辛酸合成方法的研究进展

(R)-α-硫辛酸可用于预防和治疗糖尿病及相关并发症,也可以作为保健品使用,用途广泛,因而其高效合成方法长期以来受到广泛关注。 目前,合成(R)-α-硫辛酸的方法主要有酶和化学方法催化的不对称合成、消旋体的手性拆分以及手性底物控制的不对称合成。 本文将以此为分类标准,对目前所报道的(R)-α-硫辛酸合成方法进行总结归纳和展望。     

费托合成鼓泡浆态床反应器模型化研究

建立了费托合成鼓泡浆态床反应器双泡模型,通过模型对比的方法模拟讨论了多个反应器模型,双泡模型、全混模型以及多级串联模型,对比模拟讨论了费托合成反应各模型的适用性。模拟结果说明,全混模型适用于费托合成动力学行为的考察模拟;多级串联模型在一定的级数下能够近似模拟鼓泡浆态床中费托合成反应结果,更适用于探讨返混对费托合成反应行为的影响;双泡模型能够描述鼓泡浆态床中流体力学对反应的影响。     

A short enantioselective synthesis of (+)-eleutherin, (+)-allo-eleutherin and a formal synthesis of (+)-nocardione B

A short enantioselective synthesis of (+)-eleutherin, (+)-allo-eleutherin and the formal synthesis of (+)-nocardione B is described. The synthesis is completed in six steps in overall yields of 8% for eleutherin and 14% for allo-eleutherin. The synthetic strategy features an efficient combination of the Dötz annulation reaction with a chiral alkyne and an oxa-Pictet Spengler reaction as the keys steps in the stereodivergent synthesis of (+)-eleutherin and (+)-allo-eleutherin. The synthesis of (S)-(+)-2-(2′-hydroxypropyl)-5-methoxy-1,4-naphthoquinone entails the formal synthesis of (+)-nocardione B.     

介孔分子筛制备技术新进展—二次合成、超分子自组装和介孔生成剂法

具有内部介孔结构的多级孔分子筛兼具微孔分子筛和介孔材料的功能, 拥有良好的传质和催化特性. 在过去的几十年内, 介孔分子筛在催化、 吸附和分离领域发展迅速. 近年来, 新型合成方法的开发在很大程度上实现了介孔分子筛孔道结构、 组分及形貌灵活可控的调节. 本综述讨论了近期出现的多种新合成路径, 重点介绍了近期发展起来的二次合成制备低硅/铝介孔分子筛、 超分子自组装合成介孔分子筛及有机小分子原位合成介孔分子筛技术. 对这些合成技术的机理进行了讨论, 以期为介孔分子筛未来的发展提供思路. 文章的最后还讨论了不同的合成策略所面临的一些关键性挑战.     

Flow “Fine” Synthesis: High Yielding and Selective Organic Synthesis by Flow Methods

The concept of flow “fine” synthesis, that is, high yielding and selective organic synthesis by flow methods, is described. Some examples of flow “fine” synthesis of natural products and APIs are discussed. Flow methods have several advantages over batch methods in terms of environmental compatibility, efficiency, and safety. However, synthesis by flow methods is more difficult than synthesis by batch methods. Indeed, it has been considered that synthesis by flow methods can be applicable for the production of simple gasses but that it is difficult to apply to the synthesis of complex molecules such as natural products and APIs. Therefore, organic synthesis of such complex molecules has been conducted by batch methods. On the other hand, syntheses and reactions that attain high yields and high selectivities by flow methods are increasingly reported. Flow methods are leading candidates for the next generation of manufacturing methods that can mitigate environmental concerns toward sustainable society.     

Stereoselective syntheses of γ-alkyl (aryl)-α,β-dihydroxy-γ-butyrolactones and naturally occurring lipid guggultetrol

γ-Oxo-butyramides derived from tartaric acid serve as excellent precursors for the synthesis of γ-alkyl (aryl)-α,β-dihydroxy-γ-butyrolactones and for the synthesis of tetrols containing three contiguous stereogenic centres. The methodology presented here is general for the synthesis of γ-alkyl (aryl)-α,β-dihydroxy-γ-butyrolactones. Utility of the chiral building block was demonstrated by the synthesis of naturally occurring lipid guggultetrol.     

Migratory hydroamination: a facile enantioselective synthesis of benzomorphans

We describe a highly efficient, general strategy for the enantioselective synthesis of benzomorphans (45-46% overall yield from commercially available material). The new synthesis demonstrates the effectiveness of an unprecedented diastereoselective cycloisomerization via migratory hydroamination and the power of palladium-catalyzed asymmetric allylic alkylation (AAA) of simple ketone enolates in the context of complex synthesis. The strategy outlined here for the enantioselective synthesis of three contiguous stereogenic centers and the novel cycloisomerization should have many applications in alkaloid synthesis.     

A concise and improved synthesis of (+)-eleutherin, (+)-allo-eleutherin and a formal synthesis of (+)-nocardione B

A concise and improved stereoselective synthesis of (+)-eleutherin, (+)-allo-eleutherin and the formal synthesis of (+)-nocardione B is described. The synthesis is based on a Dötz benzannulation and an improved oxa-Pictet-Spengler cyclization as the key steps. The synthesis is achieved in six steps in overall yields of 18% for eleutherin and 20% for allo-eleutherin.