首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到17条相似文献,搜索用时 156 毫秒
1.
王若曦 《化学学报》2010,68(4):315-319
为了探索氮化硼纳米管(BNNT)在化学传感器件领域的潜在应用,我们利用密度泛函理论研究了(8,0)单壁BNNT和硅掺杂的(8,0)BNNT对毒性气体氯化氰分子(ClCN)的吸附性能.结果表明,硼位或氮位硅掺杂的BNNT,均对ClCN分子存在较强的化学吸附,而纯氮化硼纳米管对ClCN仅有较弱的物理吸附.态密度的计算进一步表明硅掺杂使纳米管费米能级附近的电子结构发生显著变化,由于杂化态的引入,使带隙明显减小,增强了对毒性ClCN分子的吸附敏感性.硅掺杂的BNNT有望成为检测毒性ClCN分子的潜在资源.  相似文献   

2.
氯酚(CPs)类污染物是形成持久性有机污染物二噁英的先驱物, 具有较强的致畸、致癌和致突变性. 为探索去除或检测这类污染物的新型材料, 应用密度泛函理论研究了(8,0)单壁氮化硼纳米管(BNNT)和Co掺杂的(8,0)单壁氮化硼纳米管(Co-BNNT)对2-氯酚(2-CP)、2,4,6-三氯酚(TCP)、五氯酚(PCP)的吸附行为及作用机制. 结果表明, 与BNNT相比, Co-BNNT费米能级附近出现杂化态, 带隙明显减小. BNNT对2-CP、TCP和PCP呈现物理吸附, 而Co-BNNT对三种氯酚则是化学吸附, 纳米管与分子间发生了明显的电荷转移, 体系态密度在费米能级附近发生了明显变化. Co原子掺杂明显增强了BNNT的电子输运能力, 提高了纳米管对氯酚的吸附活性. Co-BNNT有望是去除或检测氯酚类污染物的潜在资源.  相似文献   

3.
应用密度泛函理论研究了纯(8, 0)单壁碳纳米管(SWCNT)和B原子、N原子以及BN原子对掺杂的(8, 0) SWCNTs对硫化氢气体分子的传感性质. 计算结果表明, 与纯碳纳米管相比, B原子掺杂的SWCNT显示了对H2S分子的敏感性, 其几何结构和电子性质在吸附H2S分子后发生了显著变化; 而N原子和BN原子对的掺杂没有改善SWCNT对H2S分子的吸附性能, 因此我们建议B原子掺杂的SWCNT作为检测H2S分子的新型气相传感器.  相似文献   

4.
本文较全面地综述了氮化硼(BN)纳米管研究的最新进展,详细讨论了BN纳米管的合成、结构、表征、形成机理及应用等方面的研究现状,并对今后的研究方向进行了展望。  相似文献   

5.
利用密度泛函理论研究了NH3在完整和含有缺陷的硼纳米管上的吸附行为以及相关电子性质. 计算结果表明, 对于α硼纳米管, 在不同的直径和手性条件下, NH3均倾向于吸附在配位数为6的顶位上. 电子结构计算结果表明, NH3能够吸附在纳米管表面主要是由于N和B原子产生了较强的相互作用. 表明硼纳米管是一种潜在的NH3气气敏材料.  相似文献   

6.
氮化硼纳米管的研究进展   总被引:2,自引:0,他引:2  
氮化硼纳米管的研究进展;结构;制备;性能;储氢;综述  相似文献   

7.
用密度泛函B3LYP/3-21G*方法,并利用周期边界条件,研究了n=2~17不同管径的超长(n,n)型氮化硼纳米管的结构、能量、能带结构和能隙.研究表明,氮化硼纳米管带隙较大,具有较好的绝缘性,当n为2和3时,其间接能隙值在分别为5.93~6.06 eV,当n=4~17之间时,其间接能隙值在6.19~6.23 eV之...  相似文献   

8.
对国内文献报道的气体传感器气敏性能测试系统的设计开发情况进行综述。从配气系统、数据处理系统、软件开发三个方面对半导体型气体传感器测试系统的组成进行了概述。配气系统为气敏性能测试提供一定浓度目标气体,分为静态配气法和动态配气法,动态配气法制备出的气体精确度较高,误差较小,可以连续制备气体,是目前主要配气方式。控制器是测试系统的核心部件,负责接收、处理、储存传感器与目标气体反应产生的信号,应用较多的是单片机,其次是ARM微控制器,但都存在内存和存储空间有限的问题。测试软件主要功能是发送指令,实现整个测试系统的有序运行,并实时显示测试结果,目前开发工具种类较多,其中LabVIEW较受青睐。未来气敏测试系统的测试精确度和测试效率还需进一步提高,研究开发功能更加全面的测试系统,来满足其它类型传感器测试需求。  相似文献   

9.
气敏传感器已在生物、化学、航空、军事等领域获得了广泛的应用。鉴于WO3基气敏传感器是检测H2S、NOx、O3和NH3等气体最有前景的新型氧化物气敏传感器之一,本文以不同的敏感气体为分类依据系统阐述了近年来WO3基气敏传感器的研究进展,详细探讨了制备方法及贵金属掺杂对上述各种气体气敏性能的影响,并指出了目前WO3基气敏传感器在研究过程中存在的问题。  相似文献   

10.
将五硼酸铵、 氨硼烷络合物和氧化镁混合, 球磨均匀后, 在1200 ℃及0.6 L/min流动氨气保护条件下退火6 h, 即可在氧化铝基片上收集到白色毛状产物. 采用X射线衍射(XRD), 红外光谱(FTIR)、 扫描电子显微镜(SEM)、 透射电子显微镜(TEM)、 拉曼光谱(Raman)、 紫外-可见吸收光谱(UV-Vis)和荧光光谱(PL)对产物进行了表征. 结果表明, 样品呈一维线状分级结构, 长度大于5 mm, 中间为竹节状空心结构, 内部管径为50~350 nm, 外径范围为200~800 nm. 分级结构表面负载了大量氮化硼(BN)纳米薄片, 单个薄片厚度约为13 nm. 薄片弯曲褶皱, 相互交织, 构成1个氮化硼片层, 其厚度约为50~200 nm. UV-Vis和PL光谱测试结果表明, 氮化硼纳米管(BNNT)分级结构在紫外光材料领域具有一定的应用潜力, 且对亚甲基蓝具有良好的吸附能力(7 min即可吸附71%, 107 min时可吸附96%). 对比实验结果表明, BNNT的生长机理遵循气-液-固相(VLS)模型, 而表面负载的超薄BN片的生长机理遵循气-固相(VS)模型.  相似文献   

11.
In this work, two kinds of BN-nanowires (BNnws): a-BNnw and d-BNnw, respectively composed of azo (N−N) and diboron (B−B) bonds, are proposed with the aid of the first-principles simulations. Their structural stabilities are carefully verified from the energetics, lattice dynamics, and thermodynamic perspectives. Similar to the other common boron nitride polymorph, the a-BNnw and d-BNnw are semiconductors with relatively wide band gaps of 3.256 and 4.631 eV at the HSE06 level, respectively. The corresponding projected DOS patterns point out that their band edges are composed of different atomic species, which can help with the separation of their excitons. The band gaps can be manipulated monotonically by axial strains within the elastic ranges. The major charge carriers are electron holes. Significantly, a-BNnw possesses very high carrier mobilities around 0.44×104 cm2 V−1 s−1.  相似文献   

12.
Phosgene (COCl2), a valuable industrial compound, maybe a public safety and health risk due to potential abuse and possible accidental spillage. Conventional techniques suffer from issues related to procedural complexity and sensitivity. Therefore, there is a need for the development of simple and highly sensitive techniques that overcome these challenges. Recent advances in nanomaterials science offer the opportunity for the development of such techniques by exploiting the unique properties of these nanostructures. In this study, we investigated the potential of six types of nanomaterials: three carbon-based ([5,0] CNT, C60, C70) and three boron nitride-based (BNNT, BN60, BN70) for the detection of COCl2. The local density approximation (LDA) approach of the density functional theory (DFT) was used to estimate the adsorption characteristics and conductivities of these materials. The results show that the COCl2 molecule adsorbed spontaneously on the Fullerene or nanocages and endothermically on the pristine zigzag nanotubes. Using the magnitude of the bandgap modulation, the order of suitability of the different nanomaterials was established as follows: PBN60 (0.19%) < PC70 (1.39%) < PC60 (1.77%) < PBNNT (27.64%) < PCNT (65.29%) < PBN70 (134.12%). Since the desired criterion for the design of an electronic device is increased conductivity after adsorption due to the resulting low power consumption, PC60 was found to be most suitable because of its power consumption as it had the largest decrease of 1.77% of the bandgap.  相似文献   

13.
The interaction of single-layer hexagonal boron nitride (h-BN) on Ni(111) with molecular oxygen from a supersonic molecular beam led to a covalently bonded molecular oxygen species, which was identified as being between a superoxide and a peroxide. This is a rare example of an activated adsorption process leading to a molecular adsorbate. The amount of oxygen functionalization depended on the kinetic energy of the molecular beam. For a kinetic energy of 0.7 eV, an oxygen coverage of 0.4 ML was found. Near-edge X-ray adsorption fine structure (NEXAFS) spectroscopy revealed a stronger bond of h-BN to the Ni(111) substrate in the presence of the covalently bound oxygen species. Oxygen adsorption also led to a shift of the valence bands to lower binding energies. Subsequent temperature-programmed X-ray photoelectron spectroscopy revealed that the oxygen boron bonds are stable up to approximately 580 K, when desorption, and simultaneously, etching of h-BN set in. The experimental results were substantiated by density functional theory calculations, which provided insight to the adsorption geometry, the adsorption energy and the reaction pathway.  相似文献   

14.
采用密度泛函理论(DFT)研究了杂原子M(M=Li, Na, K, Be, Mg, Ca, C和Si)在B/N单空位缺陷处的掺杂对(6,0)BN纳米管体系非线性光学性质的影响. 采用B3LYP方法共得到了14种几何构型, 并采用BHandHLYP方法计算了这些结构的第一超极化率β0值. 研究结果表明, 单纯的B或N缺陷几乎不影响BN纳米管体系的非线性光学性质; 与B缺陷处掺杂的体系相比, 杂原子在N缺陷处的掺杂更有利于提高BN纳米管体系的第一超极化率β0值; 对于同周期掺杂原子, 还原性越强的原子掺杂对BN纳米管体系的第一超极化率β0值的改善越明显, 表现为β0(Ⅰ族)>β0(Ⅱ族)>β0(Ⅳ族); 对比同主族掺杂原子, 第三周期元素Na和Mg的掺杂能更有效地提高体系的第一超极化率β0值, 原因主要在于原子半径和还原性等因素共同决定其对BN纳米管体系第一超极化率β0值的改善程度. 本文研究结果为有效提高BN纳米管体系的非线性光学性质提供了一种新思路, 为基于BN纳米管的非线性光学材料设计提供了有价值的理论信息.  相似文献   

15.
Developing the low-cost and efficient single-atom catalysts (SACs) for nitrogen reduction reaction (NRR) is of great importance while remains as a great challenge. The catalytic activity, selectivity and durability are all fundamentally related to the elaborate coordination environment of SACs. Using first-principles calculations, we investigated the SACs with single transition metal (TM) atom supported on defective boron carbide nitride nanotubes (BCNTs) as NRR electrocatalysts. Our results suggest that boron-vacancy defects on BCNTs can strongly immobilize TM atoms with large enough binding energy and high thermal/structural stability. Importantly, the synergistic effect of boron nitride (BN) and carbon domains comes up with the modifications of the charge polarization of single-TM-atom active site and the electronic properties of material, which has been proven to be the essential key to promote N2 adsorption, activation, and reduction. Specifically, six SACs (namely V, Mn, Fe, Mo, Ru, and W atoms embedded into defective BCNTs) can be used as promising candidates for NRR electrocatalysts as their NRR activity is higher than the state-of-the art Ru(0001) catalyst. In particular, single Mo atom supported on defective BCNTs with large tube diameter possesses the highest NRR activity while suppressing the competitive hydrogen evolution reaction, with a low limiting potential of −0.62 V via associative distal path. This work suggests new opportunities for driving NH3 production by carbon-based single-atom electrocatalysts under ambient conditions.  相似文献   

16.
Understanding the chemistry of BNNT is a crucial step toward their ultimate practical use. A comparative study of Reactions A (ASWCNT (5,5) and CCl2) and B (ASWBNNT (5,5) and CCl2) have been performed by using ONIOM (B3LYP/6-31G*: AM1) method in Gaussian03 program package. The results show that (1) the two reactions are both exothermic; (2) the mechanism of Reaction B is a two-step mechanism; (3) the difference in energy barriers suggests that the reaction of CCl2 with BNNT is easier than with CNT; (4) in reaction B, CCl2 prefers to attack the boron atom of BNNT first.  相似文献   

17.
Boron nitride nanomaterials have attracted attention for biomedical applications, due to their improved biocompatibility when compared with carbon nanomaterials. Recently, graphene and graphene oxide nanosheets have been shown, both experimentally and computationally, to destructively extract phospholipids from Escherichia coli. Boron nitride nanosheets (BNNSs) have exciting potential biological and environmental applications, for example the ability to remove oil from water. These applications are likely to increase the exposure of prokaryotes and eukaryotes to BNNSs. Yet, despite their promise, the interaction between BNNSs and cell membranes has not yet been investigated. Here, all‐atom molecular dynamics simulations were used to demonstrate that BNNSs are spontaneously attracted to the polar headgroups of the lipid bilayer. The BNNSs do not passively cross the lipid bilayer, most likely due to the large forces experienced by the BNNSs. This study provides insight into the interaction of BNNSs with cell membranes and may aid our understanding of their improved biocompatibility.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号