Adsorption and diffusion of nitrogen, methane and carbon dioxide in aluminophosphate molecular sieve AlPO4-11

The knowledge about the adsorption and diffusion properties (specially about diffusion) of aluminophosphate molecular sieves is very scarce in the literature. These materials offer interesting properties as adsorbents as they have a polar framework and do not contain charge-balancing cations. In this work, the adsorption isotherms of nitrogen, methane and carbon dioxide over an AlPO₄-11 sample synthesized in our laboratories have been measured with a volumetric method at 25, 35, 50 and 65 °C over a pressure range up to 110 kPa. The adsorption capacities of each gas are determined by the strength of interaction with the pore surface (carbon dioxide > methane > nitrogen). The equilibrium selectivity to carbon dioxide is quite high with respect to other adsorbents without cations due to the polarity of the aluminophosphate framework. The adsorption Henry’s law constants and diffusion time constants of nitrogen, methane and carbon dioxide in the synthesized AlPO₄-11 material have been measured from pulse experiments. A pressure swing adsorption (PSA) process for recovering methane from a carbon dioxide/methane mixture (resembling biogas) has been designed using a dynamic model where the measured adsorption equilibrium and kinetic information has been incorporated. The simulation results show that the proposed process could be simpler than other PSA processes for biogas upgrading based on cation-containing molecular sieves such as 13X zeolite, as it can treat the biogas at atmospheric pressure, and it requires a lower pressure ratio, to produce high purity methane with high recovery.     

An Electrochemical Sensor Based on Silver Nanoparticles‐Benzalkonium Chloride for the Voltammetric Determination of Antiviral Drug Tenofovir

A simple voltammetric nanosensor was described for the highly sensitive determination of antiviral drug Tenofovir. The benzalkonium chloride and silver nanoparticles were associated to build a nanosensor on glassy carbon electrode. Surface characterictics were achieved using scanning electron microscopic technique. The voltammetric measurements were performed in pH range between 1.0 and 10.0 using cyclic, adsorptive stripping differential pulse and adsorptive stripping square wave voltammetry. The linear dependence of the peak current on the square root of scan rates and the slope value (0.770) demonstrated that the oxidation of tenofovir is a mix diffusion‐adsorption controlled process in pH 5.70 acetate buffer. The linearity range was found to be 6.0×10⁻⁸–1.0×10⁻⁶ M, and nanosensor displayed an excellent detection limit of 2.39×10⁻⁹ M by square wave adsorptive stripping voltammetry. The developed nanosensor was successfully applied for the determination of Tenofovir in pharmaceutical dosage form. Moreover, the voltammetric oxidation pathway of tenofovir was also investigated at bare glassy carbon electrode comparing with some possible model compounds (Adenine and Adefovir).     

Alizarin-modified sulfonate carbon nanoparticles in vanadium sensing

The adsorption processes of alizarin onto hydrophilic carbon nanoparticles (Emperor 2000?) are investigated. The significant increase in voltammetric responses for pre-adsorbed alizarin compared with those for solution confirms high affinity of alizarin to carbon nanoparticles (possibly due to π–π stacking interaction between aromatic rings of alizarin and surface-sulfonated carbon nanoparticles). To obtain the optimum of adsorption conditions, the effects of pH, agitation rate, and adsorption time are investigated. Under square wave voltammetry conditions, the peak current for the reduction of alizarin shows a linear relationship with concentration in the range from 2.0 to 10.0 nM. The limit of detection is estimated 5.8?×?10^?9 mol L^?1. Next, alizarin is applied as a receptor for sensing of trace vanadium in acetate buffer pH 5. Linear calibration curves are obtained for vanadium in the range of 1.0?×?10^?6 to 1.0?×?10^?4 mol L^?1 and the limit of detection is estimated 9.6?×?10^?8 mol L^?1. Determination of vanadium in real samples such as sea and tap water is demonstrated.     

A fully consistent experimental and molecular simulation study of methane adsorption on activated carbon

The adsorption of pure methane in activated carbon Ecosorb was studied by combining grand canonical ensemble Monte Carlo molecular simulations and an experimental approach based on a gravimetric device. Experimental and calculated adsorption isotherms of methane were determined in supercritical conditions at 303.15 and 353.15 K and pressures up to 10 MPa. The comparison between both experimental and estimated data proves the consistency of the methodology used in this work, starting from the characterization of the porous media in terms of pore size distribution, the determination of the experimental adsorption isotherms, and the final estimation of computational results through estimated isotherms determination. Moreover, additional differential enthalpy of adsorption calculations were compared with experimental values obtained by means of a manometric/calorimetric technique. The good agreement shows the strength and the originality of this paper by combining experimental and computational homemade results allowing a complete characterization of the activated carbon substrate and its methane storage capacity.     

甲烷在石墨化热解碳黑和活性炭上的吸附

为研究影响碳基吸附剂吸附超临界温度气体的主要因素,选择石墨化热解碳黑BP280和Ajax活性炭,分析超临界温度高压甲烷在其上的吸附平衡。应用容积法,在压力0~20.5 MPa、温度253 K~313 K测定甲烷的吸附平衡数据,并由等量吸附线标绘和亨利定律常数确定等量吸附热。引入通用吸附等温方程,再由方程的Langmuir标绘确定最大吸附容量,进而通过方程的线性化计算吸附平衡态中甲烷分子的作用能。结果表明,甲烷在两种吸附剂上的最大吸附容量均随温度而变化,并都小于液态甲烷的密度;甲烷在碳黑和活性炭上的等量吸附热分别为11.9 kJ/mol~12.5 kJ/mol和17.5 kJ/mol~22.5 kJ/mol,体现了两种吸附剂不同的表面能量分布;甲烷分子间作用能随吸附量的变化特点反映了超临界温度甲烷以类似于压缩气体状态聚集的特点和吸附剂结构上的差异。碳基吸附剂的比表面积和微孔容积是影响其储存甲烷容量的重要因素。     

Electrochemical Determination and in silico Studies of Fludarabine on NH2 Functionalized Multiwalled Carbon Nanotube Modified Glassy Carbon Electrode

A sensitive voltammetric technique has been developed for the determination of Fludarabine using amine‐functionalized multi walled carbon nanotubes modified glassy carbon electrode (NH₂‐MWCNTs/GCE). Molecular dynamics simulations, an in silico technique, were employed to examine the properties including chemical differences of Fludarabine‐ functionalized MWCNT complexes. The redox behavior of Fludarabine was examined by cyclic, differential pulse and square wave voltammetry in a wide pH range. Cyclic voltammetric investigations emphasized that Fludarabine is irreversibly oxidized at the NH₂‐MWCNTs/GCE. The electrochemical behavior of Fludarabine was also studied by cyclic voltammetry to evaluate both the kinetic (k_s and E_a) and thermodynamic (ΔH, ΔG and ΔS) parameters on NH₂‐MWCNTs/GCE at several temperatures. The mixed diffusion‐adsorption controlled electrochemical oxidation of Fludarabine revealed by studies at different scan rates. The experimental parameters, such as pulse amplitude, frequency, deposition potential optimized for square‐wave voltammetry. Under optimum conditions in phosphate buffer (pH 2.0), a linear calibration curve was obtained in the range of 2×10^?7 M–4×10^?6 M solution using adsorptive stripping square wave voltammetry. The limit of detection and limit of quantification were calculated 2.9×10^?8 M and 9.68×10^?8 M, respectively. The developed method was applied to the simple and rapid determination of Fludarabine from pharmaceutical formulations.     

Determination of Rutin in Green Tea Infusions Using Square‐Wave Voltammetry with a Rigid Carbon‐Polyurethane Composite Electrode

This paper presents a comparative study on the electrochemical behavior of the flavonoid rutin on a rigid carbon‐polyurethane composite electrode and on a glassy carbon electrode. The electrochemical oxidation reaction of rutin was found to be quasireversible and affected by adsorption on the electrode surface. A square‐wave voltammetric method was developed for determination of rutin in green tea infusion samples using the RCPE electrode and data treatment by a deconvolution procedure. The detection limit achieved in buffered solutions was 7.1×10^?9 mol L^?1 using the RCPE and 1.7×10^?8 mol L^?1 using the GC electrode the average reproducibility for five determinations being 3.5%.     

Electrochemical Characterization and Rapid Voltammetric Determination of Riluzole in Pharmaceuticals and Human Serum

The electrochemical oxidation of riluzole was investigated using cyclic and linear sweep voltammetry. Under optimized conditions, current and concentration showed linear dependence in Britton Robinson buffer at pH 3.00 for boron doped diamond and pH 3.00 phosphate buffers for glassy carbon electrodes. Differential pulse and square wave voltammetry were used for the determination of riluzole levels in serum samples and pharmaceutical formulations. The limit of detections were found as 5.25 × 10^?7 M and 8.26 × 10^?8 M for glassy carbon electrode and 1.78 × 10^?7 M and 8.42 × 10^?8 M for boron-doped diamond electrodes, in serum samples, using differential pulse and square wave methods, respectively.     

Valorization of two waste streams into activated carbon and studying its adsorption kinetics,equilibrium isotherms and thermodynamics for methylene blue removal

Wastes must be managed properly to avoid negative impacts that may result. Open burning of waste causes air pollution which is particularly hazardous. Flies, mosquitoes and rats are major problems in poorly managed surroundings. Uncollected wastes often cause unsanitary conditions and hinder the efforts to keep streets and open spaces in a clean and attractive condition. During final disposal methane is generated, it is much more effective than carbon dioxide as a greenhouse gas, leading to climate change. Therefore, this study describes the possible valorization of two waste streams into activated carbon (AC) with added value due to copyrolysis. High efficiency activated carbon was prepared by the copyrolysis of palm stem waste and lubricating oil waste. The effects of the lubricating oil waste to palm stem ratio and the carbonization temperature on the yield and adsorption capacity of the activated carbon were investigated. The results indicated that the carbon yield depended strongly on both the carbonization temperature and the lubricating oil to palm stem ratio. The efficiency of the adsorption of methylene blue (MB) onto the prepared carbons increased when the lubricating oil to palm stem ratio increased due to synergistic effect. The effects of pH, contact time, and the initial adsorbate concentration on the adsorption of methylene blue were investigated. The maximum adsorption capacity (128.89 mg/g) of MB occurred at pH 8.0. The MB adsorption kinetics were analyzed using pseudo-first order, pseudo-second order and intraparticle diffusion kinetic models. The results indicated that the adsorption of MB onto activated carbon is best described using a second order kinetic model. Adsorption data are well fitted with Langmuir and Freundlich isotherms. The thermodynamic parameters; ΔG°, ΔH° and ΔS° indicate that the adsorption is spontaneous and endothermic.     

Electrochemical Analysis of Antipsychotic Drug Quetiapine Fumarate Using Multi-walled Carbon Nanotube Modified Glassy Carbon Electrode

Electrochemical properties of quetiapine fumarate were examined on the anodic direction with multi-walled carbon nanotube modified glassy carbon electrode using voltammetric methods. The ratio of multi-walled carbon nanotube has been optimized using its various concentrations. The oxidation process was found to be irreversible, and adsorption controlled. The linear ranges were determined as 4×10⁻⁹–2×10⁻⁶ M for differential pulse stripping voltammetry and 2×10⁻⁹–2×10⁻⁶ M for square-wave stripping voltammetry with detection limits of 8.07×10⁻¹⁰ and 2.71×10⁻¹⁰ M, respectively. The methods were validated and successfully applied for the analysis of quetiapine fumarate tablets. The groups responsible for the oxidation reaction of quetiapine fumarate were investigated with model substances.     

甲烷在层状石墨烯和活性炭上的吸附平衡

以吸附式天然气（ANG）吸附剂的工程应用为目的,以0-10 MPa、283.15-303.15 K甲烷在层状石墨烯（GS（3D）,比表面积2062 m²/g）和活性炭SAC-01（比表面积1507 m²/g）上的吸附平衡数据作分析。首先,在77.15 K下由氮气吸附表征样品的孔径大小及分布（PSD）和比表面积。其次,选择极低压力下的吸附平衡数据标定亨利定律常数,确定甲烷在两吸附剂上的极限吸附热,并由维里方程和10-4-3势能函数计算甲烷与两吸附剂壁面之间的相互作用势。最后,依据测试的甲烷在吸附剂上的高压吸附平衡数据,比较了Langmuir系列方程的关联数据后的拟合精度,并由绝对吸附量计算了甲烷的等量吸附热。结果表明,甲烷在GS（3D）和活性炭SAC-01上的平均极限吸附热为23.07、20.67 kJ/mol;283.15 K下甲烷分子与GS（3D）和活性炭SAC-01之间的交互作用势ε_sf/k为67.19、64.23 K,与洛伦混合法则的计算值64.60 K相近;Toth方程关联甲烷在活性炭SAC-01和GS（3D）上吸附平衡数据的拟合累计相对误差为0.25%和2.29%;甲烷在活性炭SAC-01和GS（3D）上的等量吸附热平均值为16.8和18.3 kJ/mol。相对于活性炭SAC-01,比表面积和微孔容积均较高的GS（3D）对甲烷的吸附更具有优势。     

Study on the Electrochemical Behavior of Melatonin with an Activated Electrode

It was found that melatonin could be incorporated and accumulated on the surface of the glassy carbon electrode which was activated electrochemically by pretreatment in sodium hydroxide solution by means of cycling the potential well into the positive limit of the solvent. In Britton‐Robinson buffer solution (pH 6.7), melatonin gave a sensitive oxidation wave at a potential of +0.65 V (vs.Ag/AgCl) by using Osteryoung square‐wave stripping voltammetry (OSWSV). The oxidation process has been shown to be irreversible and adsorption‐controlled at this electrode by means of cyclic voltammetry and linear sweep voltammetry. A chronocoulometric characterization of the adsorption characteristics of melatonin at this electrode is also presented. The factors affecting the peak current were optimized, and the dependence of peak currents on the concentration of melatonin was found to be linear in the range 8.0×10^?7?1.0×10^?5 mol L^?1. A detection limit of 5.0×10^?8 mol L^?1 was obtained (signal‐to‐noise ratio of 3). This method was applied to the assay of melatonin in tablets and capsules with good recoveries (98–100%).     

超临界甲烷在活性炭上的吸附平衡分析

为分析由吸附平衡时的热力参数确定吸附量、吸附模型和等量吸附热精度的影响因素,选择在温度268.15~338.15 K和压力0~13.5 MPa测试的甲烷在Ajax活性炭上的吸附平衡数据,通过引入甲烷分子可进入活性炭吸附空间内的容积和可以不考虑甲烷在孔内吸附的临界孔宽的概念,依据甲烷在吸附平衡前后的总量守恒,确定甲烷在吸附池内的总量、绝对吸附量和过剩吸附量三者之间的关系式。结果表明,在引入吸附质分子可进入吸附空间内的容积和临界孔宽后,经由活性炭的孔径分布(PSD),可以准确计算甲烷在活性炭上的过剩吸附量;应用实验数据非线性回归Toth方程参数后,可由Gibbs关于吸附的定义确定甲烷在活性炭上的绝对吸附量。比较结果时发现,由于未考虑本体相中甲烷分子对吸附甲烷分子的影响,采用过剩吸附量的等量吸附线标绘确定的等量吸附热数值偏高,工程应用时应由绝对吸附量来确定等量吸附热。     

Monte carlo simulation and pore-size distribution analysis of the isosteric heat of adsorption of methane in activated carbon

The isosteric heat of adsorption of methane in an activated carbon adsorbent has been modeled by Monte Carlo simulation, using a pore-size distribution (PSD) to relate simulation results for pores of different sizes to the experimental adsorbent. Excellent fits were obtained between experimental and simulated isosteric heats of adsorption of methane in BPL activated carbon. The PSD was then used to predict the adsorption of methane and ethane in the same carbon adsorbent, with good results. The PSD derived from isosteric heat data was shown to be richer in information than PSDs obtained by the more conventional method of fitting to isotherm data.     

The Effect of Active Carbon on the Kinetics of Polymerization of Methyl Methacrylate

Rates of 2–2¹?azobisisobutyronitrile initiated polymerization of methyl methacrylate in benzene were determined at 77.2, 65.0, and 50.0°C. The variation of molecular weight of the polymer with temperature and conversion was also studied. At a fixed conversion of 2.0%, the molecular weight decreased from 2.05 × 10⁵ at 50°C to 1.4 × 10⁵ at 77.2°C. The ratio of the propagation rate coefficient to the square root of the termination rate coefficient was found to be 0.61, 0.397, and 0.374 at 77.2, 65.0, and 50.0°C, respectively, with an uncertainty of ±0.5°C in temperature. The effect of active carbon on the rates of polymerization at 77.2°C was measured. Rates of polymerization decreased in the presence of active carbon. For example, the initial rate of polymerization decreased from 7.8 × 10^?4 mole/(liter min) to 4.6 × 10^?4 mole/(liter min) when the carbon concentration was varied from 0 to 9.65 g/liter. The molecular weight of the polymer increased from an average of 1.4 × 10⁵ in the absence of carbon to 1.5 × 10⁵ when carbon was present.     

Monte Carlo Simulation and Experimental Studies of CO2, CH4 and Their Mixture Capture in Porous Carbons

Adsorption of carbon dioxide and methane in porous activated carbon and carbon nanotube was studied experimentally and by Grand Canonical Monte Carlo (GCMC) simulation. A gravimetric analyzer was used to obtain the experimental data, while in the simulation we used graphitic slit pores of various pore size to model activated carbon and a bundle of graphitic cylinders arranged hexagonally to model carbon nanotube. Carbon dioxide was modeled as a 3-center-Lennard-Jones (LJ) molecule with three fixed partial charges, while methane was modeled as a single LJ molecule. We have shown that the behavior of adsorption for both activated carbon and carbon nanotube is sensitive to pore width and the crossing of isotherms is observed because of the molecular packing, which favors commensurate packing for some pore sizes. Using the adsorption data of pure methane or carbon dioxide on activated carbon, we derived its pore size distribution (PSD), which was found to be in good agreement with the PSD obtained from the analysis of nitrogen adsorption data at 77 K. This derived PSD was used to describe isotherms at other temperatures as well as isotherms of mixture of carbon dioxide and methane in activated carbon and carbon nanotube at 273 and 300 K. Good agreement between the computed and experimental isotherm data was observed, thus justifying the use of a simple adsorption model.     

Fixed-bed adsorption of carbon dioxide/methane mixtures on silicalite pellets

The adsorption of carbon dioxide and methane on silicalite pellets packed on a fixed bed has been studied. Equilibrium and kinetic measurements of the adsorption of carbon dioxide and methane have been performed, and a binary adsorption isotherm for carbon dioxide/methane mixtures has been obtained. A model based on the LDF approximation for the mass transfer has been used to describe the breakthrough curves obtained experimentally. A PSA cycle has been proposed for obtaining methane with purity higher than 98% from carbon dioxide/methane mixtures containing 38% and 50% methane, and its performance has been simulated using the proposed model. The simulation results show that silicalite can be a suitable adsorbent for employment in a PSA separation process for carbon dioxide removal from coalseam and landfill gases.     

Anodic Voltammetric Behavior and Determination of Antihistaminic Agent: Fexofenadine HCl

Abstract

A voltammetric study of the oxidation of fexofenadine HCl (FEXO) has been carried out at the glassy carbon electrode. The electrochemical oxidation of FEXO was investigated by cyclic, linear sweep, differential pulse (DPV), and square wave (SWV) voltammetry using glassy carbon electrode. The oxidation of FEXO was irreversible and exhibited diffusion‐controlled process depending on pH. The dependence of intensities of currents and potentials on pH, concentration, scan rate, nature of the buffer was investigated. Different parameters were tested to optimize the conditions for the determination of FEXO. For analytical purposes, a very well resolved diffusion‐controlled voltammetric peak was obtained in Britton‐Robinson buffer at pH 7.0 with 20% constant amount of methanol for DPV and SWV techniques. The linear response was obtained in supporting electrolyte in the ranges of 1.0×10^?6–2.0×10^?4 M with a detection limit of 6.6×10^?9 M and 5.76×10^?8 M and in serum samples in the ranges of 2.0×10^?6–1.0×10^?4 M with a detection limit of 8.08×10^?8 M and 4.97×10^?8 M for differential pulse and square wave voltammetric techniques, respectively. Only square wave voltammetric technique can be applied to the urine samples, and the linearity was obtained in the ranges of 2.0×10^?6–1.0×10^?4 M with a detection limit of 2.00×10^?7 M. Based on this study, simple, rapid, selective and sensitive two voltammetric methods were developed for the determination of FEXO in dosage forms and biological fluids. For the precision and accuracy of the developed methods, recovery studies were used. The standard addition method was used for the recovery studies. No electroactive interferences were found in biological fluids from the endogenous substances and additives present in tablets.     

甲烷在活性炭上吸附平衡模型的研究

比较吸附模型分析甲烷在活性炭上吸附平衡的适用性,为吸附式天然气(ANG)的工程应用提供准确的预测模型。基于在温度268.15～338.15 K、压力0～12.5 MPa测试的甲烷在Ajax活性炭上的吸附平衡数据,选择Langmuir、Langmuir-Freundlich和Toth方程,应用非线性回归拟合方程参数后,确定绝对吸附量和甲烷吸附相态,并比较方程在不同压力区域内的预测精度。结果表明,甲烷吸附相密度随平衡温度和压力变化;由绝对吸附量确定的甲烷在Ajax活性炭上的平均等量吸附热为15.72 kJ/mol,小于由过剩吸附量的标绘结果;Langmuir、Langmuir-Freundlich和Toth方程预测结果在0～0.025 MPa的累积相对误差为6.449 8%、7.918 4%和0.910 0%,在1～10 MPa为0.491 1%、0.161 3%和0.369 4%。Toth方程在整个压力范围内的预测结果最为准确,但Langmuir-Freundlich方程在较高压力区域内具有较高的预测精度。