杂多化合物催化丙烷的选择性氧化

杂多化合物由杂多阴离子和阳离子组成,杂多阴离子具有一定的空间结构,多种不同结合强度的晶格氧能够在氧化-还原反应中起传递电子和氧的作用。杂多化合物具有很强的酸性,可用作双功能催化剂。本文以磷、钼、钒杂多酸中掺杂过渡金属离子Cs^2 、Cu^2 、Fe^3 为催化剂,对丙烷氧化反应进行了研究。     

Oxidation of propane to acrylic acid and acetic acid over alkaline earth-doped Mo-V-Sb-Ox catalysts

Alkaline earth metal (Mg, Ca, Sr and Ba)-doped Mo-V-Sb-Ox catalysts, prepared by a dry-up method, have been investigated for their catalytic performance in the oxidation of propane under different reaction conditions. The catalysts have been characterized by N2 adsorption-desorption, temperature-programmed desorption (TPD) of NH3, SEM and XRD. Influence of water vapor on the catalytic performance, particularly on the selectivities to acetic acid and acrylic acid, has also been studied. The selectivity to acrylic acid was improved significantly by the doping of alkaline earth metals to Mo-V-Sb-Ox catalysts. The surface acidic sites of the catalyst decreased with the doping of the catalyst with alkaline earth metals, which ultimately was found to be beneficial for obtaining high selectivity to acrylic acid. The catalytic activity and product selectivities were found to be influenced by the reaction temperature, C3H8/O2 ratio and space velocity. A significant improvement in the selectivity to acrylic acid has also been observed by the addition of water vapor in the feed of propane and oxygen in the oxidation of propane.     

Cs-Fe-Co-Bi-Mn-Mo复合氧化物选择性催化氧化异丁烯

Mixed oxide catalyst Cs0.1 Fe2Co6BiMnMo12 Ox was prepared by the interprecipitation method, then the catalyst was calcined at different temperature. Selective oxidation of isobutene was carried out in a fixed-bed reactor. The results showed that the catalyst has high catalytic activity. Under the optimum reaction conditions ( n(-C4^= ) : n(O2) = 1:2-1:4, space velocity = 180h^-1, T = 360℃ ), the yield of methacmlein and methacrylic reached 80%, 8 %,respectively. The total yields of liquid products( methacrolein, methacrylic acid and acetic acid) reached about 90%.     

Effect of diluent and reaction parameter on selective oxidation of propane over MoVTeNb catalyst using nanoflow catalytic reactor

The selective oxidation of propane to acrylic acid over an MoVTeNb mixed oxide catalyst, dried and calcined before reaction has been studied using high-throughput instrumentation, which is called nanoflow catalytic reactor. The effects of catalyst dilution on the catalytic performance of the MoVTeNb mixed oxide catalyst in selective oxidation of propane to acrylic acid were also investigated. The effects of some reaction parameters, such as gas hourly space velocity （GHSV） and reaction temperature, for selective oxidation of propane to acrylic acid over diluted MoVTeNb catalyst have also been studied. The configuration of the nanoflow is shown to be suitable for screen catalytic performance, and its operating conditions were mimicked closely to conventional laboratory as well as to industrial conditions. The results obtained provided very good reproducibility and it showed that preparation methods as well as reaction parameters can play significant roles in catalytic performance of these catalysts.     

Selective oxidation of isobutane over Mo-V-Te mixed oxide catalysts with different tellurium contents

A series of MoV_0.3Te_x (x = 0−0.3) mixed oxides were prepared and investigated for the selective oxidation of isobutane. Among them, MoV_0.3Te_0.23 showed the best methacrolein and methacrylic acid selectivity (as high as 17% and 16%, respectively), and the yield to methacrolein and methacrylic acid reached 3.6% and 3.5%, respectively, at 21.3% isobutane conversion at 440°C.     

Catalytic conversion of nitrogen-containing compounds over monolithic oxide catalysts

Several reactions of nitrogen-containing compounds (NO+NH₃+O₂; NO+C₃H₈ +O₂; NH₃+O₂) on monolithic oxide catalysts studied at the Boreskov Institute of Catalysis (BIC) during the last few years are discussed. Effective catalytic systems for the reactions listed above are described.     

Oxidation of isobutane over hydrothermally synthesized Mo-V-Te-Nb-O mixed oxide catalysts

MoV_0.3Te_0.17 and MoV_0.3Te_0.17Nb_0.12 catalysts were prepared by a hydrothermal synthesis route and tested for the oxidation of isobutane and isobutene. Characterization results showed that the structure and property of Mo-V-Te-based catalysts are relatively different depending on the presence of the Nb element. Catalytic tests showed that the selectivity of methacrolein can comparatively be improved by the addition of Nb into the MoV_0.3Te_0.17 catalyst for the selective oxidation of isobutane.     

组合催化剂上丙烷选择氧化制丙烯酸

考察了在C3H8氧化脱氢的NiZrO催化剂和C3H6选择氧化的Mo基催化剂组成的组合催化剂上C3H8选择氧化制取丙烯酸的反应性能.结果表明,两个催化剂比例适当时,反应的丙烯酸收率可达最大.优化温度、烷氧比、空速以及N2含量等反应条件的结果发现,反应体系中O2的匮乏会严重影响反应性能.在有氧分布器的反应装置中对所选组合催化剂在优化的反应条件下进行了30h稳定性测试,结果表明,在340oC,反应性能基本稳定,C3H8转化率和丙烯酸选择性可分别维持在～20%和～74%.     

Selective Oxidation of Propane over CsFePVAsMo Heteropoly Compound Catalyst

Both the partially reduced and non-reduced multi-component heteropoly compound catalysts with Keggin structure were prepared and used for the selective oxidation of propane. The catalysts were characterized by IR, H2-TPR, NH3-TPD, SEM and XRD. The addition of Cs increased the selectivity of acrylic acid and acetic acid. The selective oxidation performance was greatly improved with the addition of As. Among all of the tested catalysts, the catalytic performance of the Cs1.8Fe0.16HxPVAs0.4Mo11O40 (non-reduced) was the best and the maximum yield of acrylic acid reached 16.42%.     

Highly active Mo-V-Te-Nb-O catalysts obtained by eliminating surface Te0 for selective oxidation of propane to acrylic acid

Different methods were used to eliminate the negative effect of surface Te⁰ in Mo-V-Te-Nb-O catalysts. The characterization and catalytic results showed that the best catalytic performance was obtained on the catalyst prepared by addition of HNO₃, and the excellent catalytic behavior could be attributed to the elimination of surface Te⁰ and the optimum synergetic effect between the M1 and M2 phases.     

BiMo基复合氧化物催化剂晶格氧性质与丙烷选择氧化性能

研究了不同组成、结构的BiMo基复合氧化物催化剂的丙烷选择氧化至丙烯醛的性能.X射线衍射(XRD)、X光电子能谱(XPS)、原位傅里叶变换激光拉曼光谱(FT-LRS)、电子顺磁共振(ESR)等多种表征结果表明,BiMo基复合氧化物催化剂上丙烷经由中间物丙烯选择氧化至丙烯醛,催化剂的晶格氧为选择性活性氧物种.丙烷直接氧化下丙烷至丙烯醛的选择性和收率与催化剂的Mo=O物种的氧化-还原性质密切关联,而Mo=O物种的性质又取决于Mo离子的配位环境,Mo=O物种的选择性转化丙烷经由丙烯至丙烯醛活性随畸变MoO6八面体、共顶点八面体、共边八面体、MoO4四面体配位环境递增.组成、结构优化调变的催化剂上丙烷选择氧化至丙烯醛选择性和收率可达45%和13.5%,催化剂中具有选择氧化活性的晶格氧物种数可达258 μmol/g.     

Oxidation of propane over ammonium-transition metal mixed keggin phosphomolybdate salts

Mixed ammonium-transition metal salts with formula of (NH4)xMyHzPMo12O40 (M = Ni2+, Co2+ or Fe 3+) denoted as MPMo12 have been investigated for the oxidation of propane, with molecular oxygen, at temperature range between 380℃ and 420℃ after in-situ pre-treatment performed at two heating rate of 5 or 9℃/min. They were characterized by BET method, XRD, UV-Vis and IR techniques. The catalysts were found to be active in the propane oxidation and selective to propene or acrolein, in particular for samples pre-t...     

Effect of calcination conditions on the catalytic behavior of Te-Mo mixed oxide catalysts in oxidation of isobutane and isobutene

A series of Te-Mo-O catalysts were prepared by decomposing (NH₄)₆TeMo₆O₂₄·nH₂O telluromolybdate under different conditions and tested for the selective oxidation of isobutane and isobutene. Characterization results showed that their structure and properties depend on the calcination conditions. Catalytic tests showed that molybdenum may be the key element for the activation of isobutane, whereas the selective oxidation of isobutene to methacrolein might proceed mainly on the surface of a TeMo-containing crystalline phase.     

Selective oxidation of hydrogen sulfide over potassium promoted vanadium oxide on a alumina catalysts

The effect of potassium addition to alumina supported vanadium catalysts on the catalytic activity for the selective oxidation of H₂S is investigated. XRD, XPS and XANES have been used to characterize a series of K-V/Al₂O₃catalysts. The enhanced sulphur yield has been correlated with the crystallinity of vanadium. This revised version was published online in August 2006 with corrections to the Cover Date.     

M-VPO(M=Te, Nb, Ce)上丙烷氧化的研究

应用有机相法制备钒磷复合氧化物,并通过浸渍法引入Ce,Te,Nb添加组分。采用低温氮吸附-脱附、XRD、TPR等手段进行了表征。结果表明,采用浸渍法制备的M-VPO(M=Ce,Te,Nb)其主要晶相为焦磷酸氧钒[(VO)₂P₂O₇]。催化剂的性能与添加组分的种类和含量密切相关。不同添加组分及含量明显改变了样品的微观结构及氧化还原能力,进而影响其催化反应行为。     

双溶剂浸渍法制备VOX/MCF催化剂及丙烷选择氧化

采用双溶剂法制备了负载型氧化钒类催化剂(VOx/MCF),N2物理吸附、X射线衍射、透射电镜、拉曼光谱、程序升温脱附、程序升温还原等系统研究了催化剂的物化性质并测试了其在丙烷选择氧化反应中的催化性能.结果表明,由双溶剂法制备的VOx/MCF催化剂具有较好的催化活性,且在氧化钒负载量基本一致的前提下,双溶剂法制备的VOx/MCF催化剂比普通浸渍法制备的VOx/MCF具有更高的催化活性,这与双溶剂法的制备过程可以使得钒物种尽可能进入载体内表面,有利于氧化钒的较好分散有关,而高度分散的氧化钒物种,正是丙烷选择氧化反应的活性中心.     

Catalytic performances and correlations with metal oxide band gaps of metal-tungsten mixed oxide catalysts in propane oxydehydrogenation

Summary Tungsten-based catalysts of the form X wt.% Na₂WO₄/support (where X = 5, 10, 50 or 75 and the support is either γ-Al₂O₃ or SiO₂) were prepared by impregnation method and tested for oxidative dehydrogenation of propane. The effects of Na₂WO₄ loadings on catalyst performances were more pronounced on γ-Al₂O₃ - supported sample. Individual first-row transition metals (V, Cr, Mn, Co, Ni or Zn) were doped on NaWSi. CoWSi exhibited the best improvement, with conversion of 10.7% and selectivity to propylene of 52.9% at 450^oC. The metal oxide band gaps were correlated with catalyst performances. At a constant propane conversion, strong correlations were observed between the band gaps and respective CO and CO₂ yields. This offers insight into relationship between the species conductivities and the products distributions.     

在复合金属氧化物催化剂上丙烷直接氧化制丙烯酸

丙烷直接氧化制丙烯酸是近年来催化氧化的热点课题。MoVTe(Sb)NbO复合金属氧化物催化剂是该反应最重要的一类催化剂。本文对该类催化剂的制备化学包括活化方式以及决定催化性能的主要活性相结构等方面的新近认识进行了系统评述;依据丙烷催化转化的反应途径,总结了有关催化剂元素组分在反应中的作用与功能的最新进展,调变催化剂的粒子尺寸与形貌、晶相组成与结构、表面酸碱性与氧化还原性是获得优良催化性能的关键因素。     

Selective oxidation of hydrocarbons catalyzed by iron-containing heterogeneous catalysts

Recent studies on iron-based heterogeneous catalysts for selective oxidation of hydrocarbons are reviewed with emphasis on the partial oxidation of methane and the epoxidation of alkenes. High dispersion of iron sites is essentially important for the selective oxidations. The effective catalysts include immobilized or encapsulated iron complexes, iron-doped metal oxides such as Fe³⁺-doped silica, iron-containing microporous and mesoporous materials, and iron-containing compounds with isolated iron sites typified by iron phosphate. The structure-reactivity relationships and the factors affecting the catalytic performances are discussed with the aim to uncover the requirements of the active iron sites in target-selective oxidation.     

Selective oxidation of ethane to aldehydes over SBA-15 supported molybdenum catalyst

SBA-15 supported Mo catalysts （Moy/SBA-15） were prepared by an ultrasonic assisted incipient-wetness impregnation method. The physical and chemical properties of the catalysts were characterized by means of N2-adsorption-desorption, XRD, TEM, UV-Vis, Raman, XANES and H2-TPR. The results showed that a trace amount of MoO3 was produced on high Mo content samples. Tum-over frequency （TOF） and product selectivity are dependent on the molybdenum content. Both Mo0.75/SBA-15 and Mo1.75/SBA-15 catalysts give the higher catalytic activity and the selectivity to the total aldehydes for the selective oxidation of C2H6. At the reaction temperature of 625℃, the maximum yield of aldehydes reached 4.2% over Mo0.75/SBA-15 catalyst. The improvement of the activity and selectivity was related with the state of MoOx species.