Solid-state compounds of 4-methoxybenzylidenepyruvate and cinnamylidenepyruvates with thorium (IV)

By close control of experimental variables affecting precipitation, solid-state compounds of the type Th(OH)_mL_4-m·nH₂O, where L stands for 4-methoxy-benzylidenepyruvate, cinnamylidenepyruvate or 4-dimethylaminocinnamylidene-pyruvate; m=0 to 3 andn=0.5-3 were isolated. Chemical analysis, TG, DTG, DSC and X-ray powder diffractometry have been employed to characterize and to study the thermal behavior of these compounds in dynamic air atmosphere. In all cases, hydration water is slowly lost between 30 and 160°C; a continuous, slow rate, mass loss is observed thereafter and beyond 280-400°C the rate of decomposition/oxidation increased rapidly, to give ThO₂as the final product, beginning at 412-510°C. The results associated with the hydroxo-compounds indicate that the loss of constitution water (OH ions) and the decomposition / oxidation of the organic moieties occur as simultaneous process. This revised version was published online in August 2006 with corrections to the Cover Date.     

Synthesis of Silica-Based Quaternized Adsorption Material and Study on Its Adsorption Behavior for Pu(IV)

In this research, we explored the synthesis optimization of the silica-based quaternized adsorption material (SG-VTS-VPQ) and its adsorption behavior for Pu(IV). By optimizing the synthesis process, the grafting amount of 4-vinylpyridine reached 1.25 mmol·g⁻¹. According to the analysis of NMR and XPS, the quaternization rate of pyridine groups reached 91.13%. In the adsorption experiments, the thermodynamic experiment results show that the adsorption of Pu(IV) by SG-VTS-VPQ is more in line with the Langmuir adsorption model and the adsorption type is a typical chemical adsorption; the kinetic results show that adsorption process is more in line with the pseudo first-order kinetic model, and the larger specific surface area of SG-VTS-VPQ plays an important role in the adsorption. The results of the adsorption mechanism show that the adsorption of Pu(IV) by SG-VTS-VPQ is mainly complex anion Pu(NO₃)₆²⁻ and Pu(NO₃)₅⁻. This research provides in-depth and detailed ideas for the surface modification and application of porous silica gel, and at the same time provides a new way to develop the direction of the analysis of pretreatment materials in the spent fuel reprocessing field.     

Structural studies on 3-acetyl-1,5-diaryl and 3-cyano-1,5-diaryl formazan chelates with cerium(III), thorium(IV) and uranium(VI)

Summary Solid complexes of 3-acetyl-1,5-diaryl and 3-cyano-1,5-diaryl formazans were prepared and characterized by elemental analysis, IR, NMR, TGA and DTA analyses. Based on these studies, the suggested general formula for the complexes is [M(HL) _m (OH^–) _n or (NO ₃ ^– or Cl^–) _x ·(H₂O) _y or (C₂H₅OH orDMSO) _z , where HL=formazanM=Ce³⁺, Th⁴⁺, and UO ₂ ²⁺ ,m=1–2,n=0–3,x=0–3,y=0–4 andz=0–3. The metal ions are expected to have coordination numbers 6–8.

---

Strukturuntersuchungen an 3-Acetyl-1,5-diaryl- und 3-Cyan-1,5-diaryl-formazan-Chelaten mit Cer(III), Thorium(IV) und Uran(VI)

Zusammenfassung Die hergestellten Chelate wurden mittels Elementaranalyse, IR, NMR, TGA und DTA charakterisiert. Darauf basierend wird die generelle Formel [M(HL) _m (OH^–) _n bzw. (NO ₃ ^– oder Cl^–) _x ·(H₂O) _y oder (C₂H₅OH bzw.DMSO) _z ] vorgeschlagen, wobei HL=Formazan,M=Ce³⁺, Th⁴⁺ oder UO ₂ ²⁺ ,m=1–2,n=0–3,x=0–3,y=0–4 undz=0–3. Die Metallionen haben Koordinationszahlen von 6–8.

     

碳纳米管对结晶紫的吸附研究

研究了碳纳米管对溶液中结晶紫的吸附性能,考察了溶液浓度、溶液p H、吸附时间和吸附温度等因素对吸附行为的影响,初步探讨了碳纳米管对结晶紫的吸附机理。结果表明,碳纳米管对结晶紫的吸附量随着溶液初始浓度的增大而升高;酸性条件有利于吸附的进行,最佳p H等于5;对结晶紫的吸附在3h达到平衡,吸附速率常数为779.76h-1;温度的变化对结晶紫的吸附量影响不大。通过Langmuir方程和Freundlich方程对吸附进行拟合,平衡吸附量Qe与平衡质量浓度Ce之间的关系符合Freundlich等温吸附方程所描述的规律,说明吸附过程以物理吸附为主。     

Adsorption of anions to zirconium(IV) and titanium(IV) chemically immobilized on gel-phase

Adsorption behaviors of 25 anions to zirconium(IV) and titanium(IV) chemically immobilized on a gel-phase were studied by ion chromatography and by batch adsorption experiments. The affinities of Zr(IV) to iminodiacetate as an anchoring group and to anions as a sample are much stronger than those of Ti(IV). On a Zr(IV) column, fourteen anions showed no retention, four anions showed pH-dependent retention in a low pH region, and seven anions were irreversibly adsorbed at pH <7. In the last group, fluoride was adsorbed both by the ligand exchange mechanism and the addition mechanism, while phosphate, arsenate and selenite were only by the ligand exchange mechanism. The structures of the adsorbed species are discussed.     

Amine-functionalized low-cost industrial grade multi-walled carbon nanotubes for the capture of carbon dioxide

Industrial grade multi-walled carbon nanotubes (IG-MWCNTs) are a low-cost substitute for commercially purified multi-walled carbon nanotubes (P-MWCNTs). In this work, IG-MWCNTs were functionalized with tetraethylenepentamine (TEPA) for CO₂ capture. The TEPA impregnated IG-MWCNTs were characterized with various experimental methods including N₂ adsorption/desorption isotherms, elemental analysis, X-ray diffraction, Fourier transform infrared spectroscopy and thermogravimetric analysis. Both the adsorption isotherms of IG-MWCNTs-n and the isosteric heats of different adsorption capacities were obtained from experiments. TEPA impregnated IG-MWCNTs were also shown to have high CO₂ adsorption capacity comparable to that of TEPA impregnated P-MWCNTs. The adsorption capacity of IG-MWCNTs based adsorbents was in the range of 2.145 to 3.088 mmol/g, depending on adsorption temperatures. Having the advantages of low-cost and high adsorption capacity, TEPA impregnated IG-MWCNTs seem to be a promising adsorbent for CO₂ capture from flue gas.     

Se(IV)在北山花岗岩上的吸附

采用批式法研究了粉碎的甘肃北山花岗岩样品(BS03, 600 m)对Se(IV)的吸附作用. 实验结果表明: 在pH 3-7范围内, Se(IV)的吸附分配比(Kd)基本不随pH变化; 当pH > 7时, Se(IV)在北山花岗岩上的Kd随pH的增大而减小. Se(IV)在北山花岗岩上的吸附不随离子强度变化. 北山地下水条件下的Ca2+(4.10×10-3 mo·lL-1)和SO42- (3.17×10-3 mo·lL-1)对Se(IV)的吸附没有影响. 此外, Se(IV)/Eu(III)/北山花岗岩三元吸附体系的实验结果表明, Se(IV) (1.46×10-5 mo·lL-1)和Eu(III) (3.33×10-6 mo·lL-1)在北山花岗岩上的吸附作用相互之间没有表观影响. 通过假定HSeO3-在广义的吸附位点≡SOH上发生了生成≡SHSeO3和≡SSeO3-的两个表面配位反应, 定量解释了Se(IV)的吸附实验结果.     

Synthesis and characterization of uranium (IV) phosphate-hydrogenphosphate hydrate and cerium (IV) phosphate-hydrogenphosphate hydrate

A new uranium (IV) phosphate of proposed formula U₂(PO₄)₂HPO₄·H₂O, i.e. uranium phosphate-hydrogenphosphate hydrate (UPHPH), was synthesized in autoclave and/or in polytetrafluoroethylene closed containers at 150 °C by three ways: from uranium (IV) hydrochloric solution and phosphoric acid, from uranium dioxide and phosphoric acid and by transformation of the uranium hydrogenphosphate hydrate U(HPO₄)₂·nH₂O. The new product appears similar to the previously published thorium phosphate-hydrogenphosphate hydrate Th₂(PO₄)₂HPO₄·H₂O (TPHPH). From preliminary studies, it was found that UPHPH crystallizes in monoclinic system (, , , β=91.67(3)° and ). Heated under inert atmosphere, this compound is decomposed above 400 °C into uranium phosphate-triphosphate U₂(PO₄)P₃O₁₀, uranium diphosphate α-UP₂O₇ and diuranium oxide phosphate U₂O(PO₄)₂.Crystallized cerium (IV) phosphate-hydrogenphosphate hydrate Ce₂(PO₄)₂HPO₄·H₂O (CePHPH) was also synthesized from (NH₄)₂Ce(NO₃)₆ and phosphoric acid solutions by the same method (monoclinic system: , , , β=91.98(1)° and ). When heating above 600 °C, cerium (IV) is reduced into Ce (III) and forms a mixture of CePO₄ (monazite structure) and CeP₃O₉.     

Affinity-based elimination of aromatic VOCs by highly crystalline multi-walled carbon nanotubes

Carbon nanotubes (CNTs) are capable of adsorbing pollutant chemicals. Their adsorptive capacities and adsorbing mechanisms, however, are not fully understood. As-grown CNTs often contain both crystalline and amorphous carbon, and the ratio of carbon types can affect adsorption. In this study, highly crystalline multi-walled carbon nanotubes (HC-MWCNTs) were used as the adsorbent for volatile organic compounds (VOCs) in contaminated air samples. Air containing 23 added VOCs (1,1-dichloroethylene, dichloromethane, trans-1,2-dichloroethylene, cis-1,2-dichloroethylene, chloroform, 1,1,1-trichloroethane, carbon tetrachloride, 1,2-dichloroethane, benzene, trichloroethylene, 1,2-dichloropropane, bromodichloromethane, cis-1,3-dichloropropene, toluene, trans-1,3-dichloropropene, 1,1,2-trichloroethane, tetrachloroethylene, dibromochloromethane, m-xylene, p-xylene, o-xylene, bromoform, and p-dichlorobenzene) was used for model samples. Adsorptive experiments were carried out by passing the air samples through a cartridge packed with HC-MWCNTs. Initial results showing high selectivity and high affinity for adsorbing aromatic VOCs (benzene, toluene, m-xylene, p-xylene, o-xylene, and p-dichlorobenzene) have provided new insight into the adsorption mechanisms. Data suggest that the HC-MWCNTs, unlike conventional carbon materials, adsorb aromatic compounds according to Fukui's frontier theory, which is based on the interactions between the HOMO and LUMO of the aromatic VOCs and those of the HC-MWCNTs.     

A novel extractant-impregnated resin containing carminic acid for selective separation and pre-concentration of uranium(VI) and thorium(IV)

The present work proposes the use of a novel extractant-impregnated resin (EIR) as an adsorbent in trace separation and pre-concentration of U(VI) and Th(IV) ions. The new EIR was prepared by impregnating carminic acid onto Amberlite XAD-16 resin beads. The morphology of new EIR was studied by BET surface area measurements and SEM micrographs. A column packed with CA/XAD-16 was used for selective separation and pre-concentration of the metal ions. Maximum adsorption of Th(IV) and U(VI) ions occurred at pHs of 3.50–5.75 and 3.75–6.50, respectively. The adsorbed metals could be eluted sequentially using 0.55?mol?L^?1 HCl for U(VI) and 2.25?mol?L^?1 HCl for Th(IV). The dynamic capacity of EIR was found to be 0.832 and 0.814?mmol?g^?1 for Th(IV) and U(VI), respectively. The tolerance limit of some foreign ions was also studied. The proposed method showed a good performance in analyzing geological reference materials and a synthetic seawater sample. Furthermore, the above procedure was successfully employed for the analysis of natural water samples.     

Darstellung und spektroskopische Charakterisierung von bindungsisomeren Halogenoselenocyanato-Osmaten(IV) und -Rhenaten(IV)

Preparation and Spectroscopic Characterization of Bond Isomeric Halogenoselenocyanato-Osmates(IV) and -Rhenates(IV) By oxidative ligand exchange of appropriate chloro-iodo complexes of Os^IV or Re^IV with (SeCN)₂ in CH₂Cl₂ or by heterogeneous reaction with Pb(SeCN)₂ or AgSeCN in CH₂Cl₂ the new complexes cis-[OsCl₄(NCSe)(SeCN)]^2?, tr.-[OsCl₄Br(NCSe)]^2?, tr.-[OsCl₄Br(SeCN)]^2?, [ReCl₅(NCSe)]^2?, [ReCl₅(SeCN)]^2?, tr.-[ReCl₄I(NCSe)]^2?, tr.?[ReCl₄(NCSe)(SeCN)]^2? and tr.?[ReCl₄(NCSe)₂]^2? are formed and isolated as pure compounds by ion exchange chromatography on DEAE-cellulose. The bond isomers are significantly distinguished by the frequencies of innerligand vibrations: n?_CN(Se) > n?_CN(N); n?_CSe(N) > n?_CSe(Se); δ_NCSe > δ_SeCN. The electronic spectra (10 K) of the solid salts reveal a bathochromic shift for the charge transfer bands of the Se isomers as compared with the corresponding N isomers. The intra-configurational transitions are observed for the Os^IV complexes at 600 to 2400 and for the Re^IV complexes at 500 to 1600 nm. The ⁷⁷Se nmr signals of the Os^IV bond isomers are registrated for Se binding in the region 970 to 1040 ppm, for N coordination downfield at 1540 to 1640 ppm.     

Adsorption Studies of Cr(III) & Cr(VI) on Lead Sulphide,Copper Sulphide & Zinc Sulphide-Determination Cr(III) in the Presence of Cr(VI)

Abstract

The adsorption studies of Cr(VI) in presence of Cr(III) on the sulphide of Lead, Zinc and Copper has been studied. It has been found that in case of lead sulphide 100% adsorption of Cr(VI) took place at pH 4.0 and of Cr(III) at pH 7.0. While in case of zinc sulphide the 100% adsorption of Cr(VI) took place at pH 4.5 and of Cr(III) at pH 6.5. In case of copper sulphide 100% adsorption of Cr(VI) took place at pH 5.0 and of Cr(III) at pH 7.0. This difference in adsorption at different pH values forms the basis for the determination of these ions. The method is accurate.     

Structural Studies on Dimethyltin(IV) Carboxylates

In order to correlate ¹¹⁹Sn Mössbauer parameters and structural data for dimethyltin(IV) derivatives, the molecular structures of bis(acetato)dimethyltin(IV) and bis(trifluoroacetato)dimethyltin(IV) were determined by single crystal X-ray diffration. Crystals of Me₂Sn(OOCCH₃)₂ are monoclinic, a = 26.282(4), b = 5.282(1), c = 14.434(3) Å, β = 101.17(2)°, Z = 8, space group C2/c, and those of [Me₂Sn(OOCCF₃)₂]_n are monoclinic, a = 8.444(1), b = 17.689(1), c = 15.368(1) Å, β = 93.013(9)°, Z = 8, space group Cc. The structures were solved by the Patterson method and were refined by full-matrix least-squares procedures to R = 0.025 and 0.027 (R_w = 0.023 and 0.030) for 2 298 and 4 182 reflections with I ≥ 3σ(F²), respectively.     

Adsorption of metal anions of vanadium(V) and chromium(VI) on Zr(IV)-impregnated collagen fiber

The metal anions of vanadium (V) and chromium (VI) in aqueous solution can be effectively adsorbed by Zr(IV)-impregnated collagen fiber (ZrICF). The maximum adsorption capacity of V(V) takes place within the pH range of 5.0 to 8.0, while that of Cr(VI) is within the pH range of 6.0 to 9.0. When the initial concentration of metal ions was 2.00 mmol L⁻¹ and the temperature was 303 K, the adsorption capacity of V(V) on Zr-ICF was 1.92 mmol g⁻¹ at pH 5.0, and the adsorption capacity of Cr(VI) was 0.53 mmol g⁻¹ at pH 7.0. As temperature increased, the adsorption capacity of V(V) increased, while that of Cr(VI) was almost unchanged. The adsorption isotherms of the anionic species of V(V) and Cr(VI) can be fit by the Langmuir equation. The adsorption rate of V(V) follows the pseudo-first-order rate model, while the adsorption rate of Cr(VI) follows the pseudo-second-order rate model. Furthermore, ZrICF shows high adsorption selectivity to V(V) in the mixture solution of V(V) and Cr(VI). Practical applications of ZrICF could be expected in consideration of its performance in adsorption of V(V) and Cr(VI).     

Pectin based cerium (IV) and thorium (IV) phosphates as novel hybrid fibrous ion exchangers synthesis,characterization and thermal behaviour

Summary Pectin based cerium (IV) and thorium (IV) phosphates have been synthesized as new phases of hybrid fibrous ion exchangers. Both materials were characterized using X-ray diffraction, infrared (IR) spectra, thermogravimetric analysis (TG), differntial thermogravimetry (DTG), differntial thermal analysis (DTA) and scanning electron microscopy (SEM), as well as the determination of their ion exchange capacity, elution and pH titration. The X-ray study reveals the amorphous nature of the materials, while SEM studies confirm the fibrous nature of the materials. The thermal studies of these materials indicate that both of them are highly stable on heating as they retain about 97% of their ion-exchange capacity (i.e.c.) on heating up to 100°C and about 81% on heating up to 200°C.     

Synthesis, structure and magnetic properties of trans-tetrachloro-bis-(pyridine)-rhenium(IV)

trans-Tetrachloro-bis-(pyridine)-rhenium(IV) crystals were obtained by reaction of (pyH)₂ReCl₆ with pyridine in a sealed tube. The title compound crystallizes in the monoclinic space group C2/m with Z=2. The Re atom has special position of site symmetry 2/m. The environment about the Re atoms can be described as a slightly distorted octahedron with pyridine ligands occupying axial positions and four chloride ligands in the equatorial plane. Magnetic susceptibility measurements over the temperature range of 1.72–300 K were carried out using a SQUID magnetometer. The magnetic interactions are antiferromagnetic with the Néel point at 9.2 K.     

Diorganotin(IV) and triorganotin(IV) derivatives of diphenic acid

The diorganotin(IV) and triorganotin(IV) derivatives R₂SnA (R = Me, n-Pr, n-Bu, n-Oct) and (R₃Sn)₂A [R = Me, Ph, cyclohexyl (Cyh); A = an anion of diphenic acid] have been prepared and characterized by elemental analysis, IR, ¹H and ¹³C NMR spectroscopies. Tetrahedral tin forms a part of a diphenate cyclic ring in the diorganotin complexes with unidentate carboxylates, which have further been used for the synthesis of cyclic acid anhydrides. The soluble dinuclear triorganotin complexes (Me, Ph) possess symmetrically bonded carboxylates while the less soluble compound (Cyh₃Sn)₂A has two asymmetrically bonded carboxylates. All have a trigonal bipyramidal structure with R₃Sn units remote from each other.     

Molecular Mechanics Calculations on Chelates of Titanium(IV), Vanadium(IV/V), Copper(II), Nickel(II), Molybdenum(IV/V), Rhenium(IV/V) and Tin(IV) with Di- and Tridentate Ligands Using the New Extensible Systematic Force Field (ESFF)—An Empirical Study

Force field calculations were performed on a series of 27 transition metal complexes of titanium(IV), vanadium(IV/V), copper(II), nickel(II), molybdenum(IV/V), rhenium(IV/V), and tin(IV) with a broad variety of di- or tridentate ligands in order to find a reliable scheme for determining the molecular structure of such chelates with the new Extensible Systematic Force Field (ESFF). A good agreement between theoretical results and experimental data was achieved. In some cases an unspecific fitting of the force field was necessary.