Studies on synthesis,determination of CMC values,kinetics and the mechanism of iron(II) reduction of surfactant–Co(III)–ethylenediamine complexes in aqueous acid medium

The surfactant–Co(III) complexes of the type cis-[Co(en)₂AX]²⁺ (A?=?Tetradecylamine, X?=?Cl^?,?Br^?) were synthesised from corresponding dihalogeno complexes by the ligand substitution method. The critical micelle concentration (CMC) values of these surfactant complexes in aqueous solution were obtained from conductance measurements. The kinetics and mechanism of iron(II) reduction of surfactant–Co(III) complexes, cis-[Co(en)₂(C₁₄H₂₉NH₂)Cl](ClO₄)₂ and cis-[Co(en)₂(C₁₄H₂₉NH₂)Br] (ClO₄)₂ ions were studied spectrophotometrically in an aqueous acid medium by following the disappearance of Co(III) using an excess of the reductant under pseudo-first-order conditions: [Fe(II)]?=?0.25?mol?dm^?3, [H⁺]?=?0.1?mol?dm^?3, [μ]?=?1.0?mol?dm^?3 ionic strength in a nitrogen atmosphere at 303, 308 and 313?K. The reaction was found to be of second order and showed acid independence in the range [H⁺]?=?0.05–0.25?mol?dm^?3. The second-order rate constant increased with surfactant–Co(III) concentration and the presence of aggregation of the complex itself altered the reaction rate. The effects of [Fe(II)], [H⁺] and [μ] on the rate were determined. Activation and thermodynamic parameters were computed. It is suggested that the reaction of [Fe(II)] with Co(III) complex proceeds by an inner-sphere mechanism.     

Kinetics and mechanism of ruthenium (III) catalyzed oxidation of ethanol by cerium (IV) in aqueous sulfuric acid media

The kinetics of oxidation of ethanol by cerium(IV) in presence of ruthenium(III) (in the order of 10^?7 mol dm^?3) in aqueous sulfuric acid media have been followed at different temperatures (25–40°C). The rate of disappearance of cerium(IV) in the title reaction increases sharply with increasing [C₂H₅OH] to a value independent of [C₂H₅OH] over a large range (0.2–1.0 mol dm^?3) in which the rate law conforms to: where [Ru]_T gives the total ruthenium (III) concentration. The values of 10^?3k_c and 10^?3k_d are 3.6 ± 0.1 dm³ mol^?1 s^?1 and 3.9 ± 0.2 s^?1, respectively, at 40°C, I = 3.0 mol dm^?3. The proposed mechanism involves the formation of ruthenium(III)^? substrate complex which undergoes oxidation at the rate determining step by cerium(IV) to form ruthenium(IV)^? substrate complex followed by the rapid red-ox decomposition giving rise to the catalyst and ethoxide radical which is oxidized by cerium(IV) rapidly. The mechanism is consistent with the existence of the complexes Ru^III · (C₂H₅OH) and Ru^III · (C₂H₅O^?) and both are kinetically active. The overall bisulphate dependence conforms to: k_obsd = A[Ru]_T/{1 + C[HSO₄^?]} where A = 2.2 × 10⁴ dm³ mol^?1 s^?1, C = 1.3 at 40°C, [H⁺] = 0.5 mol dm^?3, and I = 3.0 mol dm^?3. The observations are consistent with the Ce(SO₄)₂ as the kinetically active species. © 1995 John Wiley & Sons, Inc.     

Two-step one-electron transfer reaction of chromium(III) complex containing levodopa and uridine with N-bromosuccinimide

[Cr^III(LD)(Urd)(H₂O)₄](NO₃)₂?·?3H₂O (LD?=?Levodopa; Urd?=?uridine) was prepared and characterized. The product of the oxidation reaction was examined using HPLC. Kinetics of the oxidation of [Cr^III(LD)(Urd)(H₂O)₄]²⁺ with N-bromosuccinimide (NBS) in an aqueous solution was studied spectrophotometrically, with 1.0–5.0?×?10^?4?mol?dm^?3 complex, 0.5–5.0?×?10^?2?mol?dm^?3 NBS, 0.2–0.3?mol?dm^?3 ionic strength (I), and 30–50°C. The reaction is first order with respect to [Cr^III] and [NBS], decreases as pH increases in the range 5.46–6.54 and increases with the addition of sodium dodecyl sulfate (SDS, 0.0–1.0?×?10^?3?mol?dm^?3). Activation parameters including enthalpy, ΔH*, and entropy, ΔS*, were calculated. The experimental rate law is consistent with a mechanism in which the protonated species is more reactive than its conjugate base. It is assumed that the two-step one-electron transfer takes place via an inner-sphere mechanism. A mechanism for this reaction is proposed and supported by an excellent isokinetic relationship between ΔH* and ΔS* for some Cr^III complexes. Formation of [Cr^III(LD)(Urd)(H₂O)₄]²⁺ in vivo probably occurs with patients who administer the anti-Parkinson drug (Levodopa), since Cr^III is a natural food element. This work provides an opportunity to identify the nature of such interactions in vivo similar to that in vitro.     

Micelle-Catalyzed Interaction Between [Ni(II)-Gly-Gly]+ and Ninhydrin

The effect of cationic micelles of cetyltrimethyl ammonium bromide (CTAB) on the observed pseudo-first-order rate constant for the interaction of nickel dipeptide complex [Ni(II)-Gly-Gly]⁺ with ninhydrin has been studied spectrophotometrically. At constant temperature and pH, increase in the [CTAB] from 0.0 to 60.0 × 10^?3 mol dm^?3 caused nearly three-fold increase of the rate constant. The micellar catalysis is explained in terms of the pseudophase model. From the observed kinetic data, binding constants of micelle–[Ni(II)-Gly-Gly]⁺ (K _S), and micelle–ninhydrin (K _N) are evaluated, respectively, to be 5.3 mol^?1 dm³ and 84.0 mol^?1 dm³. The role of added inorganic (NaCl, NaBr, Na₂SO₄) and organic salts (NaBenz, NaSal) on the reaction rate has also been examined.     

Effects of alkyltrimethylammonium bromide surfactants on the kinetics of the oxidation of tris(1,10-phenanthroline)iron(II) by azido-pentacyanocobaltate(III) complex

The redox reaction between tris(1,10-phenanthroline)iron(II), [Fe(phen)₃]²⁺, and azido-pentacyanocobaltate(III), [Co(CN)₅N₃]^3? was investigated in three cationic surfactants: dodecyltrimethylammonium bromide (DTAB), tetradecyltrimethylammonium bromide (TTAB) and cetyltrimethylammonium bromide (CTAB) in the presence of 0.1?M NaCl at 35°C. Second-order rate constant in the absence and presence of surfactant, k_w and k_ψ, respectively, were obtained in the concentration ranges DTAB?=?0???4.667?×?10^?4?mol?dm^?3, TTAB?=?0–9.364?×?10^?5?mol?dm^?3, CTAB?=?0???6.220?×?10^?5?mol?dm^?3. Electron transfer rate was inhibited by the surfactants with premicelllar activity. Inhibition factors, k_w/k_ψ followed the trend CTAB?>?TTAB?>?DTAB with respect to the surfactant concentrations used. The magnitudes of the binding constants obtained suggest significant electrostatic and hydrophobic interactions. Activation parameters ΔH^≠, ΔS^≠, and E_a have larger positive values in the presence of surfactants than in surfactant-free medium. The electron transfer is proposed to proceed via outer-sphere mechanism in the presence of the surfactants.     

Thermodynamic and FTIR studies of the interactions between sodium dodecyl sulphate and strong acids – atypical conductivity pattern

Micellisation of sodium dodecyl sulphate (SDS) was studied in the presence of hydrochloric acid (HCl) and perchloric acid (HClO₄) using conductometry method. The conductivity-[SDS] plots showed abnormal profile pattern at [HCl] > 0.002 mol dm^?3 and [HClO₄] > 0.001 mol dm^?3. Below these acid concentrations, conductivity pattern was normal, and the critical micelle concentration (CMC) values of SDS were lower in both acids than in water. At high acid concentrations, post-micellar slopes were negative. Fourier transform infrared (FTIR) analysis showed significant shifts in the bands suggesting the formation of dodecyl hydrogen sulphate by SDS at high acid concentrations. Thermodynamic parameters for SDS micellisation at low acid concentrations ([HCl] = 0.002 mol dm^?3 and [HClO₄] = 0.001 mol dm^?3) were determined in the temperature range 15–40°C. As temperature increases, the change in enthalpy and entropy of micellisation becomes less positive, and the change in free energy of micellisation becomes increasingly negative.     

Oxidation of diclofenac sodium by diperiodatoargantate(III) in aqueous alkaline medium and its determination in urine and blood by kinetic methods

The kinetics and oxidation of diclofenac sodium (DFS) by diperiodatoargentate(III) (DPA) in alkaline medium at 298 K and at a constant ionic strength of 0.60 mol dm^?3 were studied spectrophotometrically. The oxidation products were [2‐(2,6‐dicloro‐phynylamino)‐phenyl]‐methenol and Ag(I), identified by LC‐ESI‐MS and IR spectral studies. The reaction between DFS and DPA in alkaline medium exhibits 1:1 stoichiometry. The reaction is first order in [DPA] and has a less than unit order dependence each in [DFS] and [alkali]. Increasing concentrations of IO^?₄ retard the reaction. The active species of DPA proposed to be monoperiodatoargentate(III), and a mechanism is suggested. The rate constants involved in the different steps of the mechanism were determined and are discussed. The activation parameters with respect to a rate‐limiting step of the mechanism were determined. The thermodynamic quantities were also determined. Using the oxidation of DFS by DPA, DFS was analyzed by kinetic methods in urine and blood sample. The proposed method enables DFS analysis in the range from 5.0 × 10^?5 to 5.0 × 10^?3 mol dm^?3. © 2010 Wiley Periodicals, Inc. Int J Chem Kinet 42: 336–346, 2010     

Ruthenium(III)‐mediated oxidation of D‐mannitol by cerium(IV) in aqueous sulfuric acid medium: A kinetic and mechanistic approach

The oxidation of D ‐mannitol by cerium(IV) has been studied spectrophotometrically in aqueous sulfuric acid medium at 25°C at constant ionic strength of 1.60 mol dm^?3. A microamount of ruthenium(III) (10^?6 mol dm^?3) is sufficient to enhance the slow reaction between D ‐mannitol and cerium(IV). The oxidation products were identified by spot test, IR and GC‐MS spectra. The stoichiometry is 1:4, i.e., [D ‐mannitol]: [Ce(IV)] = 1:4. The reaction is first order in both cerium(IV) and ruthenium(III) concentrations. The order with respect to D ‐mannitol concentration varies from first order to zero order as the D ‐mannitol concentration increases. Increase in the sulfuric acid concentration decreases the reaction rate. The added sulfate and bisulfate decreases the rate of reaction. The active species of oxidant and catalyst are Ce(SO₄)₂ and [Ru(H₂O)₆]³⁺, respectively. A possible mechanism is proposed. The activation parameters are determined with respect to a slow step and reaction constants involved have been determined. © 2010 Wiley Periodicals, Inc. Int J Chem Kinet 42: 440–452, 2010     

Kinetic Study of the Bromine-Catalyzed Isomerization of Maleic Acid in Aqueous Ce(IV)-Br−-H2SO4 Medium

The presence of ceric and bromide ions catalyzes the isomerization of maleic acid (MA) to fumaric acid (FA) in aqueous sulfuric acid. A kinetic study of this bromine-catalyzed reaction was carried out. The reaction between ceric ion and maleic acid is first order with respect to Ce(IV). For [Ce(IV)]₀=5.0×10^?4 M, [H₂SO₄]₀=1.2 M, μ=2.0 M (adjusted by NaClO₄), and [MA]₀=(0.5–1.0)M, the observed pseudo-first-order rate constant (k₀₃) at 25° is k₀₃=7.622×10^?5 [MA]₀/(1+0.205[MA]₀). The reaction between ceric and bromide ions is first order with respect to Ce(IV). For [Ce(IV)]₀=5.0×10^?4 M, [H₂SO₄]₀=1.2 M, μ=2.0 M, and [Br^?]₀=(0.025–0.150)M, the pseudo-first-order rate constant (k₀₂) at 25° is k₀₂= (4.313±0.095)x10^?2[Br^?]²+(2.060±0.119)x10^?3[Br^?]. The reaction of Ce(IV) with maleic acid and bromide ion is also first order with respect to Ce(IV). For [Ce(IV)]₀=5.0×10^?4 M, [MA]₀=0.75 M, [H₂SO₄]₀=1.2 M, μ=2.0 M, and [Br^?]₀= (0.025–0.150)M, the pseudo-first-order rate constant (k₀₃) at 25° is k₀₃= (5.286±0.045)x10^?2[Br^?]²+(3.568±0.056)x10^?3[Br^?]. For [Ce(IV)]₀=5.0 × 10^?4 M, [Br^?]₀=0.050 M, [H₂SO₄]₀=1.2 M, μ=2.0 M, and [MA]₀=(0.15–1.0)M at 25°, k₀₃=(2.108×10^?4+2.127×10^?4[MA]₀)/(1+0.205[MA]₀). A mechanism is proposed to rationalize the results. The effect of temperature on the reaction rate was also studied. The energy barrier of Ce(IV)—Br^? reaction is much less than that of Ce(IV)—MA reaction. Maleic and fumaric acids have very different mass spectra. The mass spectrum of fumaric acid exhibits a strong metastable peak at m/e 66.5.     

Kinetics of oxidation of glycylglycine by bromamine-T in acid medium

The kinetics of oxidation of a typical dipeptide glycylglycine (GG) by bromamine-T have been studied in HClO₄ medium at 40°C. The rate shows first-order dependence on [BAT]₀ and is fractional order in [GG]₀ which becomes independent of [substrate]₀ at higher [GG]₀. At [H⁺ ] > 0.02mol dm⁻³, the rate is inverse fractional in [H⁺ ] but is zero order at lower [H⁺ ] (≤0.02 mol dm⁻³). Variation in ionic strength or dielectric constant of the medium had no significant effect on the rate. The solvent-isotope effect was measured and = 1.45. Proton inventory studies have been made. The reaction has been studied at different temperatures (308-323 K) and activation parameters have been computed.     

Kinetics and salt effects of the reduction of octacyanomolybdate(V) and octacyanotungstate(V) by sulphite ions

The kinetics of the reduction of octacyanomolybdate(V) and octacyanotungstate(V) by sulphite ions has been studied over a wide pH range. The reaction is catalysed by alkali metal ions. The rate law is found to be of the form:

The third order rate constants at [OH^?] = 0.05 mol dm^?3 for the reduction of Mo(CN)₈^3? and W(CN)^3?₈ were determined as 6.2 x 10³dm⁶mol^?2 s^?1 and 22.3 dm⁶mol^?2s^?1 respectively at 298 K for A⁺ = Na⁺ while K_a for the hydrogen sulphite ion was determined as 2.4 x 10^?8 mol dm^?3. It was established that the reaction proceeds via an outer-sphere mechanism. An explanation for the alkali metal ion catalysis is proposed.     

Aqueous polymerization of acrylamide initiated by cerium (IV)–ethylenediamine tetraacetic acid redox system

Ethylenediamine tetraacetic acid (EDTA) terminated polyacrylamide was obtained by using the EDTA–cerium(IV) ammonium nitrate [Ce(IV)] redox initiator in the aqueous polymerization of acrylamide. The polymerization behaviors as a function of the concentration of Ce(IV), EDTA, and acrylamide as well as temperature were studied. The consumption rate of cerium(IV) depends a first-order reaction on the ceric ion concentration ([Ce(IV)]). The complex formation constant (K) and disproportionation constant (k_d) of Ce(IV)–EDTA chelated complex are 1.67 × 10⁴ and 3.77 × 10^?3, respectively. The rate dependences of polymerization on monomer concentration and EDTA concentration both follow a second-order reaction in the run of initial monomer concentration ([M]_i) equal to 0.2 mol dm^?3. The number average molecular weight increases linearly with the ratio of [M]_i/[Ce(IV)]_i. The mechanism and kinetics for the polymerization was proposed. The kinetic parameters involved were determined. © 1992 John Wiley & Sons, Inc.     

Pulse radiolysis studies of intermolecular charge transfers involving tryptophan and three-electron-bonded intermediates derived from methionine

The oxidation processes of the radiation-generated, three-electron-bonded intermediates AcMet₂ [S??S]⁺ and AcMet [S??Br] were investigated by pulse radiolysis via their reactions with tryptophan (TrpH). These intermediates were derived from N-acetyl-methionine amide (N-AcMetNH₂) and N-acetyl-methionine methyl ester (N-AcMetOMe). The bimolecular rate constant k of the reaction between each intermediate and l-tryptophan (TrpH) was measured. For N-AcMetNH₂, k for the reaction of AcMet₂ [S??S]⁺ with TrpH were 3.4?×?10⁸ and 2.2?×?10⁸?dm³?mol^?1?s^?1 at pH?=?1 and 4.5, respectively. For N-AcMetOMe, k for the reaction of AcMet₂ [S??S]⁺ with TrpH were 4.0?×?10⁸ and 2.8?×?10⁸?dm³?mol^?1?s^?1 at pH 1 and 4.5, respectively. The rate constants for the intermolecular transformation of Met [S??Br] into TrpH⁺ or Trp were also estimated. For N-AcMetNH₂, k for the reaction of AcMet₂ [S??Br] with TrpH were 2.6?×?10⁸ and 3.3?×?10⁸?dm³?mol^?1?s^?1 at pH 1 and 4.5, respectively. Related mechanisms were discussed.     

Nature of polarographic catalytic current in the indium-acetylsalicylic acid system

The dependence of the limiting catalytic current in the system of In(III)-acetylsalycilic acid on the concentration of indium ions and the ligand anions was described theoretically. Dissociation and protonation constants of acetylsalycilic acid molecular form and kinetic parameter connected with the rate constant of formation of polarographically active complex {K _a = 3.59×10^?3, mol dm^?3; K _H = 0.12 mol dm^?3; k = 4.0×10², A (mol/dm^?3)²} were calculated.     

Investigation of the kinetics of formation of 1 : 1 complex between chromium(III) with 1,3-propanediamine-N,N′-diacetate-N,N′-di-3-propionate ion in aqueous acidic media

The kinetics of formation of the 1?:?1 complex of chromium(III) with 1,3-propanediamine-N,N′-diacetate-N,N′-di-3-propionate (1,3-pddadp) were followed spectrophotometrically at λ _max?=?557?nm. The reaction was first-order in chromium(III). Increasing the 1,3-pddadp concentration from 2.2?×?10^?2 to 0.11?mol?dm^?3 accelerated the reaction rate. Increasing the hydrogen ion concentration from 1.995?×?10^?5 to 6.31?×?10^?4 mol?dm^?3 retarded the reaction rate. The reaction rate was also retarded by increasing ionic strength and dielectric constant of the reaction medium. A mechanism was suggested to account for the results obtained which involves ion-pair formation between the various reactants. Values of 22?kJ?mol^?1 and ?115?J?K^?1 mol^?1 were obtained for the energy and the entropy of activation, respectively, which indicate an associative mechanism. The logarithm of the formation constant of the 1?:?1 complex formed was 11.3.     

Purity Considerations and Interfacial Behavior of Solvent Extraction Systems

Abstract

The techniques to purify different components of a typical solvent extraction system, viz., n-hexane/di(2-ethylhexyl)phosphoric acid (HDEHP)/CaCl₂ solution, are described. Data showing how the purity of the different components affects the interfacial tension (γ) are given. The interfacial behavior of the n-hexane/ HDEHP/0.01 mol dm^?3 CaCl₂ solution system was studied as a function of HDEHP concentration and aqueous phase pH. γ-log [HDEHP] curves were also determined at pH 4 when the aqueous phase contained 0.05 mol dm^?3 MgCl₂, CaCl₂, SrCl₂ or BaCl₂. γ-log [HDEHP] curves revealed interaction of the metal ions with the extractant and exhibited a behavior reminiscent of aggregate formation when the aqueous phase contained Ca²⁺.     

Application of Non‐Stop‐Flow Differential Pulse Voltammetry at a Tubular Detector of Silver Solid Amalgam for Electrochemical Determination of Lomustine (CCNU)

An application of the flow differential pulse voltammetry with tubular detector based on silver solid amalgam for determination of antineoplastic drug lomustine in pharmaceutical preparations is presented. The highest sensitivity was obtained in [0.10 mol dm^?3 MES; 2.00 mol dm^?3 NaCl; pH 6.0]:EtOH (9 : 1) with flow rate 0.50 mL min^?1, and the magnitude of the modulation amplitude ?0.070 V. The calibration dependence was linear in the range 1×10^?6–1 × 10^?4 mol dm^?3 (R²=0.999). The limit of detection was 1.5×10^?7 mol dm^?3. This method was successfully used for determination of lomustine in real samples of chemotherapy drug CeeNU Lomustine 40 mg.     

Kinetics of nucleophilic attack on coordinated organic moieties. XVIII. Nucleophilicity of anions towards the tricarbonyl-(η-benzene) manganese (I) cation.

Kinetic results for the addition of OH^? to [Mn(CO)₃(η-C₆H₆)]⁺ (I) in water (eq. 1, X  OH) obey the expression k_obs  k_OH[OH^?], and give a k_OH value of 290 mol^?1 dm³ s^?1 at 20.0°C and ionic strength of 0.25 mol dm^?3. The analogous reaction of NaCN with I in water fits the two-term expression k_obs = k_OH[OH^?] + k_CN[CN^?], and leads to a k_CN value of 0.8 mol^?1 dm³ s^?1 at 20.0°C and ionic strength of 0.25 mol dm^?3. Interestingly, the related reaction (eq. 1, X  N₃) is too rapid to follow by stopped-flow spectrophotometry, indicating the overall rate trend N₃^? » OH^? » CN^?. This unusual nucleophilicity order, unexpected on the basis of both basicity and polarizability, is similar to that previously observed for anion addition to free carbonium ions.     

Binding of Copper(II) to Pectins by Electrochemical Methods

The interaction between Cu(II) and pectin extracted from citrus fruit was studied in KNO₃ 0.10 mol dm^?3 at 25 °C and pH 5.5, using ion selective electrode potentiometry and voltammetry, namely differential pulse polarography and square‐wave voltammetry. Although many independent variables may affect Cu(II)‐polymer interactions such as charge density, polymer concentration and copper to polymer concentration ratio, a good fitting was observed for the model with ML and ML₂ complex species, when M:L total concentration (mol dm^?3) ratio varies from 0.2 to 2.7 and the ligand concentration is in the range (0.2 to 1) g dm^?3, i.e., (0.4 to 2)×10^?3 mol COO^? dm^?3. The complex parameters found in these conditions were log β_CuL=3.5±0.1 and log β_CuL2= 8.0±0.2. For lower total ligand and total metal ion concentrations, used in voltammetry, the interaction Cu(II)‐pectin is affected by a cooperative mode (increase of metal ion‐ligand affinity) when the total metal ion concentration increases and by an anti‐cooperative mode when the total ligand concentration increases, possibly due to different conformations of the polymer.     

Mono-complex formation kinetics of 2-acetylcyclohexanonatochromium(III) in aqueous solution

The kinetics and mechanism of the reaction of complexation of chromium(III) with 2-acetyl-cyclohexanone has been investigated spectrophotometrically in aqueous solution at 50°C and ionic strength 0.5 mol dm^?3 NaClO₄. The equilibrium constants of the complex have been determined. The mechanism proposed to account for the kinetic data involves a double reversible pathway where both Cr³⁺ and Cr(OH)²⁺ react with the enol tautomer of the ligand with rate constants of 9.6 × 10^?3 dm³ mol^?1 s^?1, and 3.69 × 10^?2 dm³ mol^?1 s^?1, respectively. Some discussions are made on the basis of Eigen-Wilkins theory considering the effect of solvent exchange on the complex formation.