Surface decoration and dispersibility of carbon nanofibers in aqueous surfactant solution

As a novel functional nanomaterial, the dispersion effect of carbon nanofibers (CNFs) has a significant influence on the application of CNFs in the composites. Two effective surfactants, methylcellulose (MC) and polycarboxylate superplasticizer, were used to analyze the dispersion of CNFs in aqueous solution. A method utilizing ultrasonic processing was employed to achieve a homogenous CNF suspension, and the dispersion effect was further characterized by the method of measuring ultraviolet absorbency (UV absorbency), zeta potential, surface tension and transmission electron microscopy (TEM) micrographs. The results show that the zeta potential and surface tension reach the saturation plateau at MC concentration and polycarboxylate superplasticizer concentration of about 0.4 and 0.8 g/L, respectively, which reflects that the optimum concentration ratio of MC to CNFs is 2: 1, and the optimum dispersing polycarboxylate superplasticizer to CNFs ratio of 4: 1 is required to achieve dispersions with maximum achievable dispersion of CNFs.     

The science of dispersing carbon nanotubes with surfactants

Self-assembled structures adsorbed on carbon nanotubes and other nanofibres offer a plethora of opportunities to endow them with new functions and to integrate them into devices and materials. At the same time they are key to solve the greatest problem in carbon nanotube utilisation--debundling and individualisation. Success will inevitably require an understanding of the underlying structure-function relationship of the adsorbed surfactant layer. Computer simulations are ideally suited to develop this understanding as they enable us to study the structure-function relationship in great detail. Combining the results from mesoscale and atomistic simulations we begin to develop this understanding and derive a number of recommendations for optimal dispersion design.     

表面活性剂水溶液中芘的激基缔合物形成

在离子型和非离子型表面活性剂水溶液中观察到了芘的激基缔合物荧光, 其荧光强度与单体荧光强度比值对表面活性剂浓度的关系曲线中有一峰值。指出表面活性剂单体分子在水溶液中呈绕曲状构型, 对应上述峰值的表面活性剂浓度为其临界胶束浓度。     

The use of surfactants for dispersing carbon nanotubes and graphene to make conductive nanocomposites

Applications of composites based on carbon nanotubes and graphene require their exfoliation and dispersion in a polymer matrix. One of the main approaches to disperse and exfoliate carbon nanotubes and graphene is based on the use of surfactants. Here we review the surfactants utilized for dispersing carbon nanotubes and graphene, the mechanisms of filler stabilization and the methods for composite preparation based on the use of surfactants to get conductive polymer composites with minimum nanofiller loading.     

Aggregation behavior of naphthalimide fluorescent surfactants in aqueous solution

A group of novel fluorescent surfactants, N-n-alkyl-4-(1-methylpiperazine)-1,8-naphthalimide iodine [C_nndi]I (n?=?8, 10, and 12), have been synthesized and their aggregation behavior in aqueous solution have been explored by surface tension, electric conductivity, hydrogen-1 NMR spectra, absorption, and fluorescence spectra. Compared with traditional cationic surfactants, the [C_nndi]I have a rather lower critical micelle concentration and higher surface activity. Absorption and fluorescence spectra were proved to be facile method to monitor directly the aggregation states of fluorescent surfactant molecules in solution and revealed clearly the formation of face-to-face stacked structure of the [C_nndi]I molecules driven by the π–π interactions. The micelle formation process for [C_nndi]I was demonstrated to be enthalpy-driven in the temperature range investigated. Possible aggregation process was given based on the experimental results. The combination of dye and surfactant provides a way for monitoring the formation process of micelle directly by fluorescence spectra.     

Threadlike micelle formation of anionic surfactants in aqueous solution

We have investigated the formation of threadlike micelles consisting of anionic surfactants and certain additives in aqueous solution. Threadlike micelles long enough to be entangled with each other were formed in a clear aqueous solution of two anionic surfactants, sodium hexadecyl sulfate and sodium tetradecyl sulfate. These solutions also contained pentylammonium bromides or p-toluidine halides and exhibited remarkable viscoelasticity. Because the molar ratio of surfactants to cationic additives in these micelles seemed close to unity, they formed 1:1 stoichiometric complexes between surfactant anions and additive cations, as previously found in systems of cationic surfactants such as hexadecyltrimethylammonium bromide and sodium salicylate. The viscoelastic behavior of these anionic threadlike micellar systems was adequately described by a simple Maxwell element with a single relaxation time and strength, as in many similar cationic systems.     

Drying dissipative structures of nonionic surfactants in aqueous solution

Macroscopic and microscopic dissipative structural patterns form in the course of drying a series of aqueous solutions of polyoxyethylenealkyl ethers. The shift from the single round hill with accumulated surfactant molecules to the broad ring patterns of the hill in a macroscopic scale occurs as the HLB (hydrophile-liophile balance) of the surfactant molecules increases. The patterns correlate intimately with the HLB values of the surfactants. Microscopic patterns of small blocks, starlike patterns, and branched strings are formed. The size and shape of the surfactant molecules themselves influence the drying patterns in part. The pattern area and the time to dryness have been discussed as a function of surfactant concentration and HLB of the surfactants. The convection flow of water accompanying the surfactant molecules, the change in the contact angles at the drying frontier between solution and substrate in the course of dryness, and interactions among the surfactants and substrate are important for the macroscopic pattern formation. Microscopic patterns are determined in part by the shape and size of the molecules, translational Brownian movement of the surfactant molecules, and the electrostatic and hydrophobic interactions between surfactants and/or between the surfactant and substrate in the course of solidification.     

Thermodynamics of micellization of alkylimidazolium surfactants in aqueous solution

Alkylimidazolium salts are a very important class of compounds. So far, calorimetry has hardly been used to characterize their solution behaviour. The enthalpies obtained from indirect methods have an intrinsic large uncertainty, and nowadays it is clear that calorimetry is the most sensitive technique for directly measuring the thermodynamic properties of aggregation.In this work, isothermal titration calorimetry (ITC) was used along with conductivity to determine the thermodynamics of aggregation of 1-alkyl-3-methylimidazolium chlorides ([C_nmim]Cl, n = 8, 10, 12, and 14) in aqueous solution. The critical micelle concentrations, cmc, were obtained from conductivity and calorimetry, and the enthalpies of micelle formation, ΔH_mic, were derived from the calorimetric titrations. From conductivity, we could also derive the values for the degree of ionisation of the micelles (α), the molar conductivity (Λ^M) of the [C_nmim]Cl micellar species and the molar conductivity at infinite dilution (Λ^∞) for the [C_nmim]⁺ cations.Values are therefore reported for the enthalpy (ΔH_mic), the Gibbs free energy (ΔG_mic) and entropy (ΔS_mic) changes for micelle formation. Further, the aggregate sizes and aggregation numbers were obtained by light scattering (LS) measurements.The observed variation of the thermodynamic properties with the alkyl chain length is discussed in detail and compared with the traditional cationic surfactants 1-alkyl-trimethylammonium chlorides, [C_nTA]Cl. The difference in the values of the thermodynamic parameters for both types of surfactants is here related to the structure of their head groups.     

Thermodynamics of micellization for partially fluorinated cationic gemini surfactants and related single-chain surfactants in aqueous solution

A series of partially fluorinated cationic gemini surfactants and their corresponding monomeric surfactants have been studied by isothermal titration microcalorimetry. The critical micelle concentration (CMC) and enthalpy of micellization (DeltaH(mic)) were obtained from calorimetric curves. The CMCs of the gemini surfactants are much lower than those of the corresponding monomeric surfactants and decrease with an increase in the number of fluorine atoms on the hydrophobic chain. The micellization of partially fluorinated cationic gemini surfactants is much more exothermic than that of the corresponding monomeric surfactants. Because of the incompatibility of hydrocarbon spacer and partially fluorinated chain, DeltaH(mic) values of the surfactants with a C6 spacer are more negative than those of the surfactants with a C12 spacer. The variations in the architecture of the fluorocarbon chain segments may be the reason of the irregularities in the change of DeltaH(mic) for the gemini surfactants. Moreover, the contribution of the enthalpy generally increases with an increase in the number of fluorine atoms.     

Characterization of the aggregates of N-alkyl-N-methylpyrrolidinium bromide surfactants in aqueous solution

We have characterized a new class of surfactant molecules using fluorescence spectroscopic and light-scattering techniques. Our results suggest that this homologous series of N-alkyl-N-methlypyrrolidinium bromide (CnMPB) surfactants with n = 10, 12, 14, 16, and 18 represents a bridge between the well-characterized alkyltrimethylammonium bromide (CnTAB) and dialkyldimethylammonium bromide (di-CnDAB) surfactant series. For the smaller members of the CnMPB series with n = 10, 12, and 14, our results are consistent with the formation of spherical micelles as the surfactant concentration is increased. With increasing alkyl chain length, we observe that the critical micelle concentration decreases and the aggregation number increases, typical of single-tail surfactants. For C16MPB, the formation of micelles at dilute concentrations (0.10 mM) is likely, followed by the coexistence of micelles and small unilamellar vesicles at higher concentrations up to 0.82 mM where only vesicles are present. For C18MPB, our data are consistent with the formation of vesicles only. We demonstrate in this study that the combination of spectroscopic and light-scattering methods is a powerful approach to reveal aspects of aggregate structure and morphology in aqueous CnMPB surfactant systems. In particular, the sensitivity of the fluorescence probe prodan to the polarity of its microenvironment enables the rich complexity of surfactant aggregates exhibited by this series of amphiphilic molecules to be detected.     

Self-assembly of mixed anionic and nonionic surfactants in aqueous solution

We present the phase diagram and the microstructure of the binary surfactant mixture of AOT and C(12)E(4) in D(2)O as characterized by surface tension and small angle neutron scattering. The micellar region is considerably extended in composition and concentration compared to that observed for the pure surfactant systems, and two types of aggregates are formed. Spherical micelles are present for AOT-rich composition, whereas cylindrical micelles with a mean length between 80 and 300 ? are present in the nonionic-rich region. The size of the micelles depends on both concentration and molar ratio of the surfactant mixtures. At higher concentration, a swollen lamellar phase is formed, where electrostatic repulsions dominate over the Helfrich interaction in the mixed bilayers. At intermediate concentrations, a mixed micellar/lamellar phase exists.     

Polymerization of vinylidene fluoride with perfluoropolyether surfactants in supercritical carbon dioxide as a dispersing medium

The heterogeneous polymerization of vinylidene fluoride (VDF) was investigated at 50 °C with supercritical carbon dioxide (scCO₂) as a dispersing medium and diethylperoxidicarbonate as an initiator in the presence of different perfluoropolyether surfactants. When FLK 7004A ammonium carboxylate salts were used at a 5% (w/w) concentration with respect to VDF, with an initial pressure of 31–45 MPa and with an olefin concentration of about 5.5 mol/L, monomer conversions up to 63% were obtained, corresponding to a final solid content higher than 200 g/L, and the polymer was collected at the end of the process in the form of a white powder completely composed of microspheres. The effects of the density of the polymerization mixture, the monomer loading, and the surfactant concentration were studied. Collected experimental results suggest that Fluorolink ammonium perfluoropolyether carboxylic salts are the most effective surfactants yet tested in the dispersion polymerization of VDF in scCO₂. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2406–2418, 2006     

Emission behavior of 1-methylaminopyrene in aqueous solution of anionic surfactants

A new fluorescent probe, methylamino derivative of pyrene, has been considered to characterize the concentration dependent emission behavior of an aqueous solution of anionic surfactants, viz., SDS, DSS, and SDBS. It was found that the emission of the probe is uniquely sensitive to the changes in surfactant (anionic) concentration due to the functional group effect of the probe over the parent moiety, pyrene. Here, 1-methylaminopyrene (MAP) showed significant quenching of emission well below the critical micellar concentration (cmc) of the surfactant. Excimer emission of the probe due to the formation of premicellar aggregates of the surfactant solutions at a concentration close to but below the cmc and again an enhanced emission of the probe above the cmc were observed as a consequence of definite MAP-surfactant interactions. These observations assisted the possible quantification ofsurfactant concentrations and their chain length dependent premicellar aggregate formations. Significant monomer emission in relation to probe distribution in micelle was analytically authenticated. Dynamic light scattering (DLS) studies revealed the incorporation of the probe molecules in the micellar core. The fluorophore emission showed nonlinear behavior when the surfactant concentration was far above the cmc. Abrupt changes in the emission characteristics in relation to the micellar concentration led to the determination of the cmc of the surfactants.     

Size-dependent interaction of silica nanoparticles with different surfactants in aqueous solution

The size-dependent interaction of anionic silica nanoparticles with ionic (anionic and cationic) and nonionic surfactants has been studied using small-angle neutron scattering (SANS). The surfactants used are anionic sodium dodecyl sulfate (SDS), cationic dodecyltrimethyl ammonium bromide (DTAB), and nonionic decaoxyethylene n-dodecylether (C(12)E(10)). The measurements have been carried out for three different sizes of silica nanoparticles (8, 16, and 26 nm) at fixed concentrations (1 wt % each) of nanoparticles and surfactants. It is found that irrespective of the size of the nanoparticles there is no significant interaction evolved between like-charged nanoparticles and the SDS micelles leading to any structural changes. However, the strong attraction of oppositely charged DTAB micelles with silica nanoparticles results in the aggregation of nanoparticles. The number of micelles mediating the nanoparticle aggregation increases with the size of the nanoparticle. The aggregates are characterized by fractal structure where the fractal dimension is found to be constant (D ≈ 2.3) independent of the size of the nanoparticles and consistent with diffusion-limited-aggregation-type fractal morphology in these systems. In the case of nonionic surfactant C(12)E(10), micelles interact with the individual silica nanoparticles. The number of adsorbed micelles per nanoparticle increases drastically whereas the percentage of adsorbed micelles on nanoparticles decreases with the increase in the size of the nanoparticles.     

Aggregation behavior of hexadecyltrimethylammonium surfactants with various counterions in aqueous solution

Both thermodynamic and microenvironmental properties of the micelles for a series of cationic surfactants hexadecyltrimethylammonium (C16TAX) with different counterions, F-, Cl-, Br-, NO3-, and (1/2)SO4(2-), have been studied. Critical micelle concentration (CMC), degree of micelle ionization (alpha), and enthalpy of micellization (DeltaH(mic)) have been obtained by conductivity measurements and isothermal titration microcalorimetry. Both the CMC and the alpha increase in the order SO4(2-) < NO3- < Br- < Cl- < F-, consistent with a decrease in binding of counterion, except for the divalent anion sulfate. DeltaH(mic) becomes less negative through the sequence NO3- < Br- < Cl- < F- < SO4(2-), and even becomes positive for the divalent sulfate. The special behavior of sulfate is associated with both its divalency and its degree of dehydration. Gibbs free energies of micellization (DeltaG(mic)) and entropies of micellization (DeltaS(mic)) have been calculated from the values of DeltaH(mic), CMC, and alpha and can be rationalized in terms of the Hofmeister series. The variations in DeltaH(mic) and DeltaS(mic) have been compared with those for the corresponding series of gemini surfactants. Electron spin resonance has been used to assess the micropolarity and the microviscosity of the micelles. The results show that the microenvironment of the spin probe in the C16TAX surfactant micelles depends strongly on the binding of the counterion.     

Fabrication of chitosan composite nanofibers for the recovery of precious palladium cations from aqueous solution

Cellulose - In this paper, chitosan composite nanofibers with mean diameters of 300–500&nbsp;nm have been prepared by electrospinning with poly(methacrylic acid) as the crosslinking agent...     

Polymeric surfactants with tricyclic rigidity from natural rosin: Synthesis and dispersion of single-walled carbon nanotubes in aqueous solution

Polymeric surfactants from natural rosin containing a unique tricyclic rigid structure were prepared and their structures were characterized by IR, ¹H NMR and GPC. Their surface activities including hydrophile—lipophile balance values (HLB), emulsification properties, foaming properties, critical micelle concentration (CMC) and the minimum surface tension (γCMC) were evaluated. With the increase in ratio of hydrophobic to hydrophilic in polymeric surfactant, the CMC values of the surfactants decreased, and the emulsification and foaming properties of these surfactants increased, and the HLB values of them decreased. This type of polymeric surfactants was used to disperse single-walled carbon nanotubes (SWCNTs) in water, and their dispersal capacities were comparatively determined by UV-visible absorption spectroscopy. Thermogravimetric analysis (TGA) was used to quantify the amount of surfactant attached onto the nanotubes. More intuitive image of their dispersion states were obtained by transmission electron microscopy (TEM) and atomic force microscopy (AFM). The results showed that this type of polymeric surfactants had good dispersion capacity and dispersion stability to SWCNTs in water through strong hydrophobic attraction and weak van der Waals interactions.     

Tetrabutylammonium alkyl carboxylate surfactants in aqueous solution: self-association behavior, solution nanostructure, and comparison with tetrabutylammonium alkyl sulfate surfactants

A series of long and ultralong chain tetrabutylammonium alkyl carboxylate (TBACm, TBA = tetrabutylammonium ion; Cm = carboxylate ion C(m-1)H(2)(m-1)CO(2)(-) of total carbon number m) surfactants have been obtained by direct neutralization of the fatty acids with m = 12, 14, 18, 22, and 24 by tetrabutylammonium hydroxide. Time-resolved fluorescence quenching has been used to determine the micelle aggregation number (N) of the surfactants with m = 12, 14, and 18 in the temperature range 10-50 degrees C and of the surfactants with m = 22 and 24 in the temperature range 25-60 degrees C. In all instances the values of N were well below those that can be calculated for the maximum spherical micelle formed by surfactants with the same alkyl chain as the investigated surfactants on the basis of the oil drop model for the micelle core. The microstructure of selected solutions of TBAC22 was examined using transmission electron microscopy at cryogenic temperature and compared to the microstructure of solutions of TBA dodecyl and tetradecyl sulfates. These observations generally confirmed the findings of TRFQ. The self-association behavior of these anionic surfactants with TBA counterions is explained on the basis of the large size and the hydrophobicity of the tetrabutylammonium ions. The important differences in behavior that have been evidenced between tetrabutylammonium alkyl carboxylates and alkyl sulfates are discussed in terms of differences in distribution of the surfactant electrical charge on the headgroup and alkyl chain predicted by quantum chemical calculations (Langmuir 1999, 15, 7546).