Molecular design of lipophilic disalicylic acid compounds with varying spacers for selective lead(II) extraction

Lipophilic disalicylic acids 5,5'-decyl-2,2'-[1,2-ethanediylbis(oxy)]bisbenzoic acid (1), 5,5'-decyl-2,2'-[1,3-propanediylbis(oxy)]bisbenzoic acid (2), 5,5'-decyl-2,2'-[oxybis(1,2-ethanediyl-oxy)]bisbenzoic acid (3), 3,5-bis[2'-(2'-carboxyphenoxy)ethyl]-4-oxahexacyclo-[5.4.1.0(2,6).0(3,10).0(5,9).0(8,11)]dodecane (4), and 1,3-bis[2'-(2'-carboxyphenoxy)ethyl]adamantane (5) are evaluated as selective Pb(II) extractants. The solvent extraction of Pb(II) and of Cu(II) from buffered aqueous solutions of varying pH into chloroform by ligands 1-5 is examined in relation to the molecular structure of the dicarboxylic acid extractant. Ligand 1, with an ethylene spacer between two lipophilic salicylic acid units, exhibits excellent extraction selectivity for Pb(II) over Cu(II). Lengthening the spacer in ligands 2 and 3 diminishes both the extraction efficiency and selectivity. Ligands 4 and 5, with rigid spacer units, show significant reductions in both Pb(II) and Cu(II) extraction. Slope analysis reveals that ligand 1 reacts in a 2:1 stoichiometry with Pb(II) in extraction, which differs from the 1:1 stoichiometries for 2 and 3. The differences in the half extraction pH (DeltapH(1/2)) values for Pb(II) and Cu(II) extraction are 1.29, 0.49, and 0.48 for 1-3, respectively.     

Cation complexation with p-tert-butylcalix[5]arene pentacarboxylic acid derivative: an allosteric regulation of the first metal ion for stepwise extraction of the second ion

A calix[5]arene based solvent extraction reagent 3, appending carboxylic acid groups at the lower rim, has been developed and its complexation behavior towards some transition metal ions has been studied. The host 3 can selectively and quantitatively extract Pb(II) ions above pH 1.8 while other divalent ions such as Cu(II), Zn(II), Co(II), Ni(II) are extracted quantitatively only above pH 3.0. The outstanding Pb(II) selectivity of 3 comes from the size fit complementarity effect of the Pb(II) ion in the calix[5]arene cavity. One molecule of 3 extracts two Pb(II) ions in a stepwise manner. The first Pb(II) ion is extracted into the deep cavity of the calix[5]arene defined by phenoxy oxygen atoms. The first complexed Pb(II) ion acts as a template to bring the host into a cone conformation and induces a positive allosteric effect for the extraction of the second Pb(II) ion at an oxygen rich coordinating site composed of carboxyl groups. Both the Pb(II) ions are extracted through an ion exchange mechanism and the electroneutral complex in the organic phase is formed by the release of an equivalent number of hydrogen ions into aqueous solution. The loaded Pb(II) is easily back-extracted from Pb(II)-complexed 3 using dilute acid solution.     

Preconcentration and separation of copper (II) with solvent extraction using N,N′-bis(2-hydroxy-5-bromo-benzyl)1,2 diaminopropane

Preconcentration and separation with solvent extraction of Cu(II) from aqueous solution using N,N′-bis(2-hydroxy-5-bromo-benzyl)1,2 diaminopropane (H₂L) as the new extractant has been studied. Separation of Cu(II) from other metal ions such as Cd(II), Ni(II), Zn(II), Pb(II), Cr(III), Co(II) and Mn(II) at aqueous solutions of various pH values and complexing agent H₂L, has been described. The possible extraction mechanism and the compositions of the extracted species have been determined. The separation factors for these metals using this reagent are reported while efficient methods for the separation of Cu(II) from other metal ions are proposed. From the loaded organic phase, Cu(II) stripping was carried out in one stage with different mineral acid solutions. The stripping efficiency was found to be quantitative in case of HNO₃ and HCl. From quantitative evaluation of the extraction equilibrium data, it has been deduced that the complex extracted is the simple 1:1 chelate, CuL. The extraction constant has a value of logK_ex=−4.05±0.04.     

Determination of anti-inflammatory drugs in water samples, by in situ derivatization, solid phase microextraction and gas chromatography-mass spectrometry

In this work, the reactions of various copper ions with 1,3,3-trimethyl-2-[5-(1,3,3-trimethyl-1,3-dihydro-indol-2-ylidene)-penta-1,3-dienyl]-3H-indolium--more commonly known as dimethylindodicarbocyanine polymethyne dye (DIDC)--as well as the application of the results obtained for the development of a spectrophotometric method for the determination of Cu(I), Cu(II) and Cu(III) are described. Cu(I) and Cu(II) in the presence of chloride ions and DIDC reagent are extractable by a variety of organic solvents. It is important to emphasize that Cu(I) was extracted under considerably different experimental conditions than Cu(II). The optimum conditions for the extraction of the Cu ion associates with DIDC by amyl acetate and the determination of Cu(I) and Cu(II) were found to be: pH 3-5 and pH 3-6 and chloride concentrations of 0.5-0.8 mol L(-1) and 3-6 mol L(-1) for Cu(I) and Cu(II), respectively. The molar absorptivities for Cu(I) and Cu(II) are 1.8x10(5) L mol(-1) cm(-1) and 1.2x10(5) L mol(-1) cm(-1), respectively. A reaction mechanism is suggested. Cu(III) does not extract in the presence of chloride ions. However, Cu(III) is a strong oxidative agent which can cause the decolourisation of the DIDC reagent. The optimum conditions for Cu(III) determination were found to be: 2x10(-5) mol L(-1) DIDC; pH 8; water:acetone 4:1 medium. The developed procedures were tested for the determination of Cu(I), Cu(II) and Cu(III) in semiconductor samples.     

Carboxylic acid functionalized ortho-linked oxacalix[2]benzene[2]pyrazine: synthesis, structure, hydrogen bond and metal directed self-assembly

Cyclooligomerization of 2,6-dichloropyrazine 4 and benzyl 2,3-dihydroxybenzoate 5 under microwave irradiation resulted in a racemic pair of ester functionalized ortho-linked oxacalix[2]benzene[2]pyrazine 6, which was further transformed to the corresponding racemic carboxylic acid functionalized ortho-linked oxacalix[2]benzene[2]pyrazine 3. Both enantiomers of 3 adopt 1,3-alternate conformations with their two carboxylic acid groups pointing to opposite directions in the solid state. Enantiomers of 3 form a step-like one-dimensional supramolecular polymer via intermolecular hydrogen bond interactions between the carboxylic acids for crystals obtained in methanol. No hydrogen bonds were formed between the carboxylic acids for crystals of 3 obtained in pyridine and aqueous guanidine solutions; instead, intermolecular hydrogen bonds between the carboxylic acid groups of 3 and pyridine, as well as guanidinium ions were formed. Under metal-mediated self-assembly conditions, the pyrazinyl nitrogen atoms in 3 interacted with transition metal ions, such as Ag(I), Cu(II) and Zn(II), and resulted in the formation of four new metal-containing supramolecular complexes. Metallomacrocycles 7, 8 and 9 were formed by reactions of 3 with Ag(I) or Cu(II) ions by bridging two ligands 3 in the equatorial region via M-N coordination bonds. A one-dimensional coordination polymer 10 was generated by reaction between ligand 3 and Zn(II) ions, and a cage-based structure is presented in 10 by bridging of the cyclophane units by Zn(2+) ions via Zn-N and Zn-O bonds.     

A new chelating resin for preconcentration and determination of Mn(II), Ni(II), Cu(II), Zn(II), Cd(II), and Pb(II) by flame atomic absorption spectrometry

A new polychelatogen, AXAD-16-1,2-diphenylethanolamine, was developed by chemically modifying Amberlite XAD-16 with 1,2-diphenylethanolamine to produce an effective metal-chelating functionality for the preconcentration of Mn(II), Ni(II), Cu(II), Zn(II), Cd(II), and Pb(II) and their determination by flame atomic absorption spectrometry. Various physiochemical parameters that influence the quantitative preconcentration and recovery of metal were optimized by both static and dynamic techniques. The resin showed superior extraction efficiency with high-metal loading capacity values of 0.73, 0.80, 0.77, 0.87, 0.74, and 0.81 mmol/g for Mn(II), Ni(II), Cu(II), Zn(II), Cd(II), and Pb(II), respectively. The system also showed rapid metal-ion extraction and stripping, with complete saturation in the sorbent phase within 15 min for all the metal ions. The optimum condition for effective metal-ion extraction was found to be a neutral pH, which is a great advantage in the preconcentration of trace metal ions from natural water samples without any chemical pretreatment of the sample. The resin also demonstrated exclusive ion selectivity toward targeted metal ions by showing greater resistivity to various complexing species and more common metal ions during analyte concentration, which ultimately led to high preconcentration factors of 700 for Cu(II); 600 for Mn(II), Ni(II), and Zn(II); and 500 for Cd(II) and Pb(II), arising from a larger sample breakthrough volume. The lower limits of metal-ion detection were 7 ng/mL for Mn(II) and Ni(II); 5 ng/mL for Cu(II), Zn(II), and Cd(II), and 10 ng/mL for Pb(II). The developed resin was successful in preconcentrating metal ions from synthetic and real water samples, multivitamin-multimineral tablets, and curry leaves (Murraya koenigii) with relative standard deviations of < or = 3.0% for all analytical measurements, which demonstrated its practical utility.     

Trace Analysis of Heavy Metals with Two New Disodium Bisdithiocarbamates

Two chelating reagents, disodium N,N′-dibenzylethylenebisdithiocarbamate 1 and disodium piperazinebisdithiocarbamate 2, were synthesized and used to preconcentrate trace metals in aqueous samples. For analysis of Cu(II) using a UV-vis spectrometer, Beer's law was obeyed from 5.0 μg L^?1 to 6.0 mg L^?1 for reagent 1, and from 0.2 mg L^?1 to 6.0mg L^?1 for reagent. 2. The chelation ratio for reagent 1 to Cu(II) was determined to be 1:1, with a formation constant 1.0 × 10⁹ M^?l. The dependence of extraction and extraction efficiency of reagent 1 on pH was also studied with an atomic absorption spectrometer for nine heavy-metal ions-Cu(II), Fe(III), Pb(II), Co(II), Cr(VI), Ni(II), Zn(II), Mn(II) and Cd(II). Except Cr(VI) and Mn(II), the recovery yields of the other seven metal ions were almost quantitative at pH = 4 ? 6. The recovery was 82% for Cr(VI) at pH = 4 ? 5, and 52% for Mn(II) at pH = 6 ? 7.     

Preconcentration of cadmium, cobalt, copper, nickel and zinc by solvent extraction into methyl isobutyl ketone with 1,5-bis [1-(2-pyridyl) ethylidene] thiocarbonohydrazide and 1,5-bis [phenyl-(2-pyridyl) methylene] thiocarbonohydrazide

The synthesis, physicochemical properties and interactions of two new thiocarbohydrazones, namely 1,5-bis[1-(2-pyridyl) ethylidene] thiocarbonohydrazide (APTH) and 1,5-bis[phenyl-(2-pyridyl) methylene] thiocarbonohydrazide (BPTH) have been studied as well as the use of both compounds as extracting reagents. These thiocarbohydrazones form yellow complexes with bivalent metal ions, and these are extractable into methyl isobutyl ketone. Conditions for quantitative extraction of Cd(II), Co(II), Cu(II), Ni(II) and Zn(II) are established from a critical study of the effect of pH, shaking time, reagent concentration in the organic phase, ionic strength and volume ratio of aqueous to organic phase.     

Synthesis, investigation and spectroscopic characterization of piroxicam ternary complexes of Fe(II), Fe(III), Co(II), Ni(II), Cu(II) and Zn(II) with glycine and DL-phenylalanine

The ternary piroxicam (Pir; 4-hydroxy-2-methyl-N-(2-pyridyl)-2H-1,2-benzothiazine-3-carboxamide 1,1-dioxide) complexes of Fe(II), Fe(III), Co(II), Ni(II), Cu(II) and Zn(II) with various amino acids (AA) such as glycine (Gly) or DL-phenylalanine (PhA) were prepared and characterized by elemental analyses, molar conductance, IR, UV-Vis, magnetic moment, diffuse reflectance and X-ray powder diffraction. The UV-Vis spectra of Pir and the effect of metal chelation on the different interligand transitions are discussed in detailed manner. IR and UV-Vis spectra confirm that Pir behaves as a neutral bidentate ligand coordinated to the metal ions via the pyridine-N and carbonyl group of the amide moiety. Gly molecule acted as a uninegatively monodentate ligand and coordinate to the metal ions through its carboxylic group, in addition PhA acted as a uninegatively bidentate ligand and coordinate to the metal ions through its carboxylic and amino groups. All the chelates have octahedral geometrical structures while Cu(II)- and Zn(II)-ternary chelates with PhA have square planar geometrical structures. The molar conductance data reveal that most of these chelates are non electrolytes, while Fe(III)-Pir-Gly, Co(II)-, Ni(II)-, Cu(II)- and Zn(II)-Pir-PhA chelates were 1:1 electrolytes. X-ray powder diffraction is used as a new tool to estimate the crystallinity of chelates as well as to elucidate their geometrical structures.     

Solid phase extractive preconcentration of trace metals using p-tert-butylcalix[4]arene-1,2-crown-4-anchored chloromethylated polymeric resin beads

5,11,17,23-Tetrakis(1,1-dimethylethyl)-25,26-dihydroxy-27,28-crown-4-calix[4]arene in the cone conformation was synthesized. This p-tert-butylcalix[4]arene-1,2-crown-4 compound was then anchored with Merrifield chloromethylated resin beads. The modified polymeric resin was characterized by ¹H NMR, FT-IR and elemental analysis and used successfully for the separation and preconcentration of Cu(II), Cd(II), Co(II), Ni(II) and Zn(II) prior to their determination by FAAS. Effective extraction conditions were optimized in both batch and column methods. The resin exhibits good separating ability with maximum between pH 6.0-7.0 for Cu(II), pH 6.0 for Cd(II), pH 5.0 for Co(II), pH 4.0-4.5 for Ni(II), and pH 4.5 for Zn(II). The elution studies were carried out with 0.5 mol L⁻¹ HCl for Cu(II), Co(II) and Co(II), 1.0 mol L⁻¹ HCl for Cd(II) and Zn(II). The sorption capacity, preconcentration factor and distribution coefficient of each metal ion were determined. The detection limits were 1.10, 1.25, 1.83, 1.68 and 2.01 μg L⁻¹ for Cu(II), Cd(II), Co(II), Ni(II) and Zn(II). The influence of several ions on the resin performance was also investigated. The validity of the proposed method was checked for these metal ions in NIST standard reference material 2709 (San Joaquin Soil) and 2711 (Montana Soil).     

Solid-phase extraction of some heavy metal ions on a double-walled carbon nanotube disk and determination by flame atomic absorption spectrometry

A new preconcentration method was developed for the determination of trace amounts of Cu(II), Fe(III), Pb(II), Ni(II), and Cd(II) on a double-walled carbon nanotube disk. 4-(2-Thiazolylazo) resorcinol was used as a complexing reagent. The effects of parameters, including pH of the solutions, amounts of complexing reagent, eluent type, sample volume, flow rates of solutions, and matrix ions were examined for quantitative recoveries of the studied analyte ions. The retained metal ions were eluted by 2 M HNO3. The LOD values for the analytes were in the range of 0.7-4.4 microg/mL. Natural water samples and standard reference materials were analyzed by the presented method.     

Effect of the pH on the complexation of Cu(II), Ni(II) and Fe(III) Ions by a vine leaf litter extract by fluorescence quenching

An extract of dead vine leaves (vitis viniferal) (VLE) was obtained by the extraction procedure for fulvic acids and its interaction (at a concentration of 25mg/L in 0.1 M KNO₃) with the Cu(II), Ni(II) and Fe(III) ions was studied in the pH range between 3 and 6. This interaction was monitored by synchronous molecular fluorescence, since bands due to the fluorescent ligands undergo quenching upon complex formation. After the chemometric isolation of the quenching profiles from the raw spectra by a self-modeling mixture analysis, SIMPLISMA, they were analyzed by two methods: (i) graphical procedures based on the Stern-Volmer model; and (ii) a non-linear least-squares procedure. For the Cu(II) and Ni(II) ions, the treatment by these two methods provided similar values both for the logarithm of the conditional stability constants (log Kc) and the percentage of fluorescent structures that do not participate in the complexation. The log Kc were (standard deviations in parenthesis): Cu(II) ion, 2.4 (3), 3.37(3), 4.4(1) and 4.92(9), respectively, for pH = 3, 4, 5 and 6; Ni(II)ion, 2.9(1), 3.3(2), and 4.09(3), respectively, for pH = 4, 5 and 6. For Fe(III) an interaction with VLE was observed, but no values for Kc could be obtained.     

Furoin thiosemicarbazone as an analytical reagent for nickel(II), palladium(II) and copper(II)

Furoin thiosemicarbazone (FTS) reacts with Ni(II), Pd(II) and Cu(II) in aqueous medium, giving yellow solutions at pH 9, 6 and 3 respectively. The complexes have absorption maxima at 360 nm for Ni(II) and Pd(II) and 355 nm for Cu(II). At these wavelengths the reagent absorbance is negligible. The molar absorptivities are 1.54 x 10(4) [Ni(FTS)(2)], 1.98 x 10(4) [Pd(FTS)(2)] and 1.45 x 10(4) 1.mole(-1).cm(-1) (CuFTS). Beer's law is valid up to 4, 5 and 3 ppm for Ni, Pd and Cu respectively. The apparent instability constant of the Ni-FTS system is found to be 6.5 x 10(-11), of the Cu-FTS system 7.1 x 10(-7) and of the Pd-FTS system 3 x 10(-12) at the recommended pH values. The effect of various ions is reported.     

Sorbent extraction of Pb(II), Cu(II), Ni(II), and Fe(III) ions as 2-(5-bromo-2-pyridylazo)-5-diethylamino-phenol chelates on single-walled carbon nanotube disks prior to their flame atomic absorption spectrometric determinations in animal feeds and natural water samples

A sorbent extraction procedure for Pb(II), Cu(II), Ni(II), and Fe(III) ions on single-walled carbon nanotube disks has been established. Analyte ions were converted to 2-(5-bromo-2-pyridylazo)-5-diethylamino-phenol chelates, then adsorbed on the disk. Adsorbed chelates were easily desorbed from the disk by using 10 mL 2 M HNO3. The various analytical parameters, including pH and reagent amounts that were effective for the recoveries of the analytes on nanotube disks, were optimized. The influence of matrix ions was also studied. The LOD values based on 3sigma were in the 0.3-4.6 microg/L range. Validation of the proposed SPE procedure was carried out by the determination of analytes in certified reference materials (TMDA-54.4 fortified lake water and HR-1 Humber River sediment). Spiking and recovery experiments for the analyte ions in real samples gave good results. Application of the procedure was illustrated by the determination of analyte contents in some animal feeds and water samples from Turkey.     

Proton-ionizable acyclic dibenzopolyethers and their polymers for use in selective lead(II) separation

Abstract

2,2′-[1,2-Ethanediylbis(oxy)]bisbenzoic acid (1), 2,2′-[oxybis(1,2-ethanediyloxy)]bisbenzoic acid (2), 1,2-[2′-(acetoxy)phenoxy] ethane (3), and 1,5-[2′-(acetoxy)phenoxy]-3-oxopentane (4) have been prepared for use in selective Pb(II) separation. The extraction of Pb(II) and Cu(II) from buffered aqueous solutions of varying pH into chloroform by 1–4 is examined in relation to their molecular structure. Compound 1 with an ethylene glycol spacer unit exhibits excellent extraction selectivity for Pb(II) over Cu(II). Lengthening the spacer group to a diethylene glycol unit diminishes the extraction efficiency and selectivity. For 3 and 4, extraction was inefficient due to low lipophilicity and solubility of the ligands in chloroform. Condensation polymerization of compounds 3 and 4 with formaldehyde in formic acid provides stable chelating resins 5 and 6 which contain both ion-exchange and polyether binding sites for metal complexation. Resin 5 with an ethylene glycol spacer group is found to be an effective chelating resin for Pb(II) separation. The sorption mechanism and selectivity are studied and compared with the commercially available iminodiacetic acid resin CR-10.     

Synthesis of new ionic β-cyclodextrin polymers and characterization of their heavy metals retention

In this study, a new aqueous insoluble ionic β-cyclodextrin polymer (PYR), synthesized by reaction of β-cyclodextrin with pyromellitic anhydride [1], is characterized by IR spectroscopy, showing typical cyclodextrin and carboxylic absorptions. pH-metric titrations of the acidic functions with standard NaOH solutions followed by a refinement of protonation constants, with specific software for equilibrium in solution, have been performed. Through this approach, the pK _a values of the functional groups have been calculated. The complexation capabilities of PYR towards metal ions [Al(III), Mn(II), Co(II), Ni(II), Cu(II), Zn(II), Pd(II), Cd(II), Pt(IV), Tl(I), and U(IV)] have been evaluated in aqueous solution (pH 3–5). The retention is mainly pH dependent and higher than 70% for Al(III), Mn(II), Co(II), Ni(II), Cu(II), Zn(II), Pd(II), Cd(II) and U(IV). For Tl(I) and Pt(IV) the retention is about 60% and 40% respectively.     

Azocalix[4]pyrrole Amberlite XAD-2: New polymeric chelating resins for the extraction, preconcentration and sequential separation of Cu(II), Zn(II) and Cd(II) in natural water samples

Two novel azocalix[4]pyrrole Amberlite XAD-2 polymeric chelating resins were synthesized by covalently linking diazotized Amberlite XAD-2 with calix[4]pyrrole macrocycles. The chelating resins were used for extraction, preconcentration and sequential separation of metal ions such as Cu(II), Zn(II) and Cd(II) by column chromatography prior to their determination by UV/vis spectrophotometry or flame atomic absorption spectrophotometry (FAAS) or inductively coupled plasma atomic emission spectroscopy (ICP-AES). Various parameters such as effect of pH on absorption, concentration of eluting agents, flow rate, total sorption capacity, exchange kinetics, preconcentration factor, distribution coefficient, breakthrough capacity and resin stability, were optimized for effective separation and preconcentration. The resin showed good ability for the separation of metal ions from binary and ternary mixture on the basis of pH of absorption and concentration of eluting agents. The newly synthesized resins showed good potential for trace enrichment of Cu(II), Zn(II) and Cd(II) metal ions, especially for Cu(II), as compared to the earlier reported resins. The synthesized resins were recycled at least 8-10 times without much affecting column sorption capacity. The presented method was successfully applied for determination of Cu(II), Zn(II) and Cd(II) in natural and ground water samples.     

Synthesis of ditopic ligands for the selective extraction of copper(II) nitrate and crystal structures of their Cu(II) complexes

We have synthesized two ditopic ligands for selective extraction of copper(II) nitrate. We also synthesized one cation-only binding analog for comparison. All three ligands were characterized by conventional techniques. Competitive two-phase metal ion solvent extraction experiments were performed at 25 °C over a period of 24 h. These ligands showed significant selectivity for Cu(II) ions, having the ditopic ligands extract 81 and 73% of the Cu(II) ions in a solution of different metal ions {Ni(II), Co(II), Cu(II), Zn(II), Cd(II), Pb(II)} at pH 5.09. Competitive transport experiments (water/chloroform/water) were undertaken employing each ligand separately as the ionophore in the membrane (chloroform) phase. No metal ion transport was observed, but a large concentration of Cu(II) was present in the membrane phase. Competitive anion extraction and transport were carried out with the ditopic ligands, yielding selective extraction and transport of nitrate. Furthermore, a pH isotherm of the best ditopic ligand (H₂L²) with Cu(II) was determined from pH 1.0 to 6.0, producing a pH_½ value of approximately 2.6. Finally, crystal structures of the ditopic ligands complexed with Cu(II) were determined and refined. The coordination geometry around the metal centers are distorted square planar and the Cu(II)-donor bond lengths fall within the normal range.     

Extraction of copper(II) carboxylates with chloroform under substoichiometric conditions

The features are considered of binding carboxylic acids (HR) as dimeric solvated copper(II) complexes at the copper(II) extraction with chloroform under substoichiometric conditions, with excess of the metal ion in the aqueous phase. The fundamental difference in the optimization of the quantitative extraction of copper(II) in the form of any carboxylate with a maximum ratio of Cu:R and the total binding with carboxylic acids to form the copper complex of the minimum stoichiometry was noted. It was found that quantitative binding of HR occurred at the extraction of mixed-ligand acetate-carboxylate copper(II) complexes without control over the aqueous phase acidity when acetic acid medium or copper(II) acetate was used, but not copper chloride, nitrate, perchlorate, or sulfate. The possibility of determination by extraction-photometric method by the color of the Cu(II) complex was shown that was suitable only to those carboxylic acids, whose logarithm of the partition coefficient in the water-chloroform mixture was higher than three.     

Solvent extraction of copper(II) with chlorendic acid

The solvent extraction of Cu(II) with chlorendic acid has been studied The composition of the extracted species appears to be a function of pH. In the pH range 3.2-4.6, a monomeric species exists [Cu(II)(L(2-)], while at pH values greater than 4.5, a dimer in the form of [Cu(II)(L(2-)). H(2)L](2) and/or [Cu(II)(HL(-))(2)](2) is extracted.