超导腔数字自激垂直测试系统

基于数字自激算法设计并实现的超导腔垂直测试系统提高了超导腔的垂直测试效率,为先进光源技术研发与测试平台（PAPS）的超导腔批量化生产提供了重要保障;垂直测试系统的射频前端和时钟分配系统采用了二次上下变频方案,可以在一定范围内灵活设置测试系统自激环路的工作频率,增大了该测试系统的工作带宽。利用此系统完成了1.3 GHz 9-cell超导腔的通带频率测试,结果表明,该测试系统能有效避免不同模式之间的串扰,具备较强的频率分辨能力（＜800 kHz）,保证多单元超导腔性能验证的进行。

     

PKU-SCAF 1.3GHz超导腔2K垂直测试恒温器设计

1.3GHz超导腔是北京大学超导加速器装置(PKU-SCAF)中的关键设备,在正式安装之前,需对其进行超流氦条件下的性能测试。在2K垂直测试恒温器功能及流程分析的基础上,对恒温器关键部件进行了强度计算,形变分析、温度场仿真分析,给出了关键设备-低温负压换热器的设计参数,对垂直测试恒温器2K温区进行了热负荷分析与计算,确定了恒温器的结构形式,为恒温器的低温测试和稳定运行提供了理论依据。     

超导腔垂直测量系统中的磁屏蔽

简要介绍空间磁场对纯铌超导加速腔性能的影响,以及在超导腔垂直测量时对空间磁场进行有效屏蔽的方法.由于多数磁性材料对应力和温度变化非常敏感,而且国内缺乏在低温下相关磁屏蔽材料性能的数据,为此对8种国产铁磁和软磁材料在低温下的初始磁导率进行了测量,并给出了相应的测试结果.最后介绍了作者研制的1.3GHz超导腔垂直测量低温恒温器内置式磁屏蔽装置及其性能.     

国产铌材超导腔的研制和实验

通过对国产铌腔的研制和探索，掌握了超导腔的计算制造和实验研究的关键技术，进行铌材性后获得了铌腔后处理的特定工艺，在２．５Ｋ温度时，国产铌腔的加速梯度超过１０ＭＶ／ｍ，品质因素１０＾９。     

超导低温垂测2K系统设计

为了检验加速器驱动次临界系统直线加速器中的超导腔性能,需要在超导腔装入低温恒温器之前进行低温超导测试(2K、4K)。为满足25MeV超导直线加速器调试运行,需要建造一套超导低温测试系统与实验平台,用来对超导腔的性能进行垂直测试,检验腔体是否达到设计目标,使其满足工程使用需求。     

BEPCⅡ超导腔垂直测试杜瓦的漏热分析与实验研究

北京正负电子对撞机重大改造工程(简称BEPCⅡ)采用了超导射频技术,超导腔设备在与低温恒温器总装之前,必须进行液氦温度下垂直位置的性能测试.测试杜瓦的绝热性能对超导腔的垂直测试性能产生直接影响,准确测算测试杜瓦的漏热量对垂直测试方案的制定、减少液氦消耗量具有重要的指导意义.对测试杜瓦的主要漏热部分进行了计算,同时以液氮...     

1.3GHz单cell高梯度低损耗超导腔设计研究

计划中的国际直线对撞机(简称 ILC), 已确定采用低温超导技术. 研究表明, ILC的整体造价与超导腔的加速梯度密切相关, 因此新型高梯度超导腔的研制, 已成为目前ILC的热门课题. 目前超导腔加速梯度的提高受限于超导体射频临界磁场(H_c^rf), 希望通过腔形的优化设计, 来减小超导腔表面峰值磁场与加速梯度的比值(H_p/E_acc), 进而提高超导腔的加速梯度, 以满足ILC的要求. 目前, 具有代表性的高梯度超导腔新腔形有两种, 即低损耗超导腔(LLSCC)和重入式超导腔(RESCC). LLSCC相对于RESCC而言, 具有较低的H_p/E_acc, 因此在理论上LLSCC更易于达到较高的梯度. 作者对1.3GHz单cell高梯度低损耗超导腔的腔形进行了详细的研究, 给出了相应低损耗超导腔腔形, 并对这一设计结果进行了分析比较.     

射频超导腔加速性能的改进

 为提高超导加速腔的加速梯度和Q值，改进了薄膜型超导腔的加速性能。研究证明，对于铜铌溅射腔，在无氧铜衬底和铌膜之间加入NbN 层可以提高铌膜的超导转变温度，改善晶格结构；对纯铌超导腔提出了改进方法，在传统的纯铌超导腔表面制备多层的超导-绝缘-超导复合膜可以屏蔽Nb腔表面的界面场，提高超导腔的临界磁场，从而提高了铌腔的加速梯度。     

射频超导腔加速性能的改进

为提高超导加速腔的加速梯度和Q值,改进了薄膜型超导腔的加速性能。研究证明,对于铜铌溅射腔,在无氧铜衬底和铌膜之间加入NbN 层可以提高铌膜的超导转变温度,改善晶格结构;对纯铌超导腔提出了改进方法,在传统的纯铌超导腔表面制备多层的超导-绝缘-超导复合膜可以屏蔽Nb腔表面的界面场,提高超导腔的临界磁场,从而提高了铌腔的加速梯度。     

射频超导腔加速性能的改进

为提高超导加速腔的加速梯度和Q值，改进了薄膜型超导腔的加速性能。研究证明，对于铜铌溅射腔，在无氧铜衬底和铌膜之间加入NbN 层可以提高铌膜的超导转变温度，改善晶格结构；对纯铌超导腔提出了改进方法，在传统的纯铌超导腔表面制备多层的超导-绝缘-超导复合膜可以屏蔽Nb腔表面的界面场，提高超导腔的临界磁场，从而提高了铌腔的加速梯度。     

A vertical test system for China-ADS project injector II superconducting cavities

To test superconducting cavities, a vertical test system has been designed and set up at the Institute of Modern Physics （IMP）. The system design is based on VCO-PLL hardware and the NI Labview software. The test of the HWR010#2 superconducting cavity shows that the function of this test system is satisfactory for testing the low frequency cavity.     

Analysis of superconducting cavity quench events at SSRF

Quench is important and dangerous to superconducting RF cavities. This paper illustrates the mechanism of quench and how a quench detector works, and analyzes the quench events happening during beam operations and cavity conditioning. We find that the quench protection is mostly triggered by some reasons such as fluctuation of cavity voltage, multipacting or arc, rather than a real cavity thermal breakdown. The results will be beneficial to optimize the operation parameters of superconducting cavities, to discover the real reasons for beam trip by quench interlock, and to improve the operation stability of superconducting RF systems.     

1.3 GHz超导腔的掺氮实验

为了大幅度提高纯铌超导腔的品质因数,从而降低其使用功耗,选择对超导腔进行高温氮掺杂处理。立足国内外大型加速器的需求,中国科学院高能物理研究所首先开展了1.3 GHz 1-cell超导腔的研究,包括常规处理以及氮掺杂实验,并且对掺杂前后的结果进行了分析、对比。结果表明,通过掺氮,两只1.3 GHz 1-cell细晶粒纯铌超导腔的品质因数均获得了显著提升,同时在超导腔低温垂直测试中观察到了比较明显的反常的品质因数随加速梯度变化的曲线,即“anti-Q-slope”现象。

     

上海光源500MHz超导腔水平测试

上海光源是能量为3.5 GeV的第三代先进中能同步辐射光源,其储存环上安装了三台超导高频腔补偿电子因同步辐射等原因丢失的能量。为保障上海光源的长期稳定高效运行,中国科学院上海应用物理研究所和上海市低温超导高频腔技术重点实验室共同研制了具备低高次模损失参数和可承受更高入射功率的新型500 MHz超导腔,作为上海光源在线运行超导高频腔的备用腔。超导铌腔经低温垂直测试达到所需加速性能后,需要与高功率输入耦合器、高次模吸收器、低温恒温器等集成并完成水平测试,获得超导腔模组的加速性能、低温性能和真空性能。介绍了超导腔备用腔的研制、集成和测试过程,采用文丘里(Venturi)校准法获得模组的静态功耗反应模组的低温性能,并通过高功率测试获得了超导腔备用腔模组的加速性能。测试结果表明：自主研制的500 MHz超导腔备用腔满足上海光源的工作需求,在超导腔的加速腔压为2.0 MV时,无载品质因数为1.2×10⁹ @4.2 K,且低温模组的静态热损耗为36.1 W。     

Analysis of superconducting cavity quench events at SSRF

Quench is important and dangerous to superconducting RF cavities. This paper illustrates the mechanism of quench and how a quench detector works, and analyzes the quench events happening during beam operations and cavity conditioning. We find that the quench protection is mostly triggered by some reasons such as fluctuation of cavity voltage, multipacting or arc, rather than a real cavity thermal breakdown. The results will be beneficial to optimize the operation parameters of superconducting cavities, to discover the real reasons for beam trip by quench interlock, and to improve the operation stability of superconducting RF systems.     

Study of multipacting effect in superconducting cavity

A number of superconducting cavities of axis-symmetric geometry have been considered to study the effect in order to achieve the desired performance.It is shown that the multipacting effect is strongly dependent on the condition of the RF surface and can be suppressed with reconsideration of the geometry.The simulation result is compared with the result of the semi-analytical model in the end.     

Study of multipacting effect in superconducting cavity

A number of superconducting cavities of axis-symmetric geometry have been considered to study the effect in order to achieve the desired performance. It is shown that the multipacting effect is strongly dependent on the condition of the RF surface and can be suppressed with reconsideration of the geometry. The simulation result is compared with the result of the semi-analytical model in the end.     

The design of a five-cell high-current superconducting cavity

Energy recovery linacs are promising for achieving high average current with superior beam quality. The key component for accelerating such high-current beams is the superconducting radio-frequency cavity. The design of a 1.3 GHz five-cell high-current superconducting cavity has been carried out under cooperation between Peking University and the Argonne National Laboratory. The radio-frequency properties, damping of the higher order modes, multipacting and mechanical features of this cavity have been discussed and the final design is presented.