Binuclear cobalt(II/II) and cobalt(II/III) chelates with O<Subscript>2</Subscript>N<Subscript>2</Subscript> ligands: synthesis,structure and magnetic studies

Abstract  The title complexes and have been synthesized in excellent yields by reacting Co(OAc)₂·4H₂O with H₂L¹ and H₂L², respectively, in acetonitrile solution. Here, [L¹]²⁻ and [L²]²⁻ are the deprotonated forms of N,N-bis(2-hydroxybenzyl)-N′,N′-dimethylethylenediamine and N,N-bis(2-hydroxybenzyl)-2-picolylamine, respectively. The crystal structures of and were determined by x-ray crystallography. In , each cobalt atom has distorted trigonal bipyramid geometry, while in , each cobalt atom has distorted octahedral geometry. Variable temperature magnetic moment measurements show weak antiferromagnetic interaction in . The magnetic characterization for is in agreement with the presence of Co(II) and Co(III) centers. Graphical Abstract  The title complexes and have been synthesized in excellent yields by reacting Co(OAc)₂·4H₂O with dianionic N₂O₂ coordinating ligands. In complex 1, each cobalt atom has distorted trigonal bipyramid geometry, while in complex 2, each cobalt atom has distorted octahedral geometry. Variable temperature magnetic moment measurements show weak antiferromagnetic interaction in complex 1. The magnetic characterization for complex 2 is in agreement with the presence of Co(II) and Co(III) centers. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

On the charge storage mechanism at RuO<Subscript>2</Subscript>/0.5 M H<Subscript>2</Subscript>SO<Subscript>4</Subscript> interface

Comparative study of capacitative properties of RuO₂/0.5 M H₂SO₄ and Ru/0.5 M H₂SO₄ interfaces has been performed with a view to find out the nature of electrochemical processes involved in the charge storage mechanism of ruthenium (IV) oxide. The methods of cyclic voltammetry and scanning electron microscopy (SEM) were employed for the investigation of electrochemical behavior and surface morphology of RuO₂ electrodes. It has been suggested that supercapacitor behavior of RuO₂ phase in the potential E range between 0.4 and 1.4 V vs reference hydrogen electrode (RHE) should be attributed to double-layer-type capacitance, related to non-faradaic highly reversible process of ionic pair formation and annihilation at RuO₂/electrolyte interface as described by following summary equation:

The Radial Distribution of Ions and Electrons in RF Inductively Coupled H<Subscript>2</Subscript>/T<Subscript>2</Subscript>B Plasmas

A glow discharge polymer (GDP) was fabricated using trans-2-butene (T₂B) and hydrogen (H₂) via a plasma-enhanced chemical vapor deposition (PECVD) system. The uniformity of the GDP films was significantly affected by the radial distribution of the H₂/T₂B plasma parameters. The plasma properties while discharging by a multi-carbon gas source of mixed H₂/T₂B were investigated during the GDP deposition process. The main positive ions and ion energy distributions in inductively coupled H₂/T₂B plasmas were analyzed by energy-resolved mass spectrometer (MS), and the electron density and the effective electron temperature were mainly analyzed using a Langmuir probe. The MS results show that the main positive ions in the plasmas are \({\text{C}}_{ 2} {\text{H}}_{ 4}^{ + }\), \({\text{C}}_{ 2} {\text{H}}_{ 6}^{ + }\), \({\text{C}}_{ 3} {\text{H}}_{ 3}^{ + }\), \({\text{C}}_{ 3} {\text{H}}_{ 6}^{ + }\), \({\text{C}}_{ 3} {\text{H}}_{ 8}^{ + }\), \({\text{C}}_{ 4} {\text{H}}_{ 5}^{ + }\), \({\text{C}}_{ 4} {\text{H}}_{ 1 0}^{ + }\), \({\text{C}}_{ 5} {\text{H}}_{ 5}^{ + }\), and \({\text{C}}_{ 5} {\text{H}}_{ 7}^{ + }\) with mass-to-charge ratios (m/e) of 28, 30, 39, 42, 44, 53, 58, 65, and 67, respectively. For a normalized ion intensity, the relative intensities of saturated CH ions increase with increasing radial distance, while the unsaturated CH ions decrease with increasing radial distance. The ion energy distribution of \({\text{C}}_{ 2} {\text{H}}_{ 6}^{ + }\) (m/e = 30) presents a bimodal structure. Additionally, both the electron density and the effective electron temperature decrease with increasing radial distance.     

Mechanism of the catalyzed by cysteine electroreduction of the insoluble in water cobalt(II) salt as a component of carbon paste electrode

The mechanism of the Co(II) catalytic electroreduction of water insoluble CoR₂ salt in the presence of cysteine was developed. CoR₂ = cobalt(II) cyclohexylbutyrate is the component of a carbon paste electrode. Electrode surface consecutive reactions are: (a) fast (equilibrium) reaction of the complex formation, (b) rate-determining reversible reaction of the promoting process of CoR(Ac⁺) complex formation, (c) rate-determining irreversible reaction of the electroactive complex formation with ligand-induced adsorption, and (d) fast irreversible reaction of the electroreduction. Reactions (a,b) connected with CoR₂ dissolution and reactions (c,d) connected with CoR₂ electroreduction are catalyzed by . Regeneration of (reactions “b,d”) and accumulation of atomic Co(0) (reaction “d”) take place. Experimental data [Sugawara et al., Bioelectrochem Bioenergetics 26:469, 1991]: i _a vs E (i _a is anodic peak, E is cathodic accumulation potential), i _a vs , and i _a vs pH have been quantitatively explained.     

Hydrogen peroxide as a reductant of hexacyanoferrate(III) in alkaline solutions: kinetic studies

The kinetics of hexacyanoferrate(III) reduction by hydrogen peroxide in strongly alkaline media leading to hexacyanoferrate(II) ion have been studied spectrophotometrically within the wavelength range 300–500 nm. The reaction obeys a simple pseudo-first-order rate expression under the applied conditions, namely, a large excess of the reductant and OH⁻ anion concentrations, and a low oxidant concentration. The linear dependences of the pseudo-first-order rate constant on OH⁻ and H₂O₂ concentrations are consistent with the rate law of the form: where and are the second- and the pseudo-third-order rate constants for the electron transfer from HO₂ ⁻ and O₂ ²⁻ to [Fe(CN)₆]³⁻, respectively. The apparent activation parameters determined at 0.4 M NaOH are as follows: ΔH ^# = (18.0 ± 1.0) kJ mol⁻¹ and ΔS ^# = (−155 ± 3.5) J K⁻¹ mol⁻¹. The possible mechanism of the reaction is discussed.     

Mixed-Valence 24-Vanadophosphate Decorated with Six RuII(dmso)3 Groups: [{RuII3(dmso)9PVV11VIVRuIIIO37(OH)3}2]8?

The mixed-valence 24-vanadophosphate (1) has been synthesized and characterized in the solid state by IR, magnetism, EPR, XPS, and elemental analysis. Single-crystal X-ray analysis was carried out on (Na-1), which crystallizes in the triclinic system, space group , with a = 17.168(3) ?, b = 18.1971(14) ?, c = 20.1422(13) ?, α = 114.753(3)°, β = 99.390(4)°, γ = 95.124(4)°, and Z = 2. Polyanion 1 has an unusual, open structure composed of 2 Ru^IIIO₆ octahedra, 2 V^IVO₆ octahedra, 14 V^VO₅ square-pyramids, 8 V^VO₄ tetrahedra, and 2 PO₄ tetrahedra which are all directly linked via edges and corners. The outer surface of 1 is decorated with six Ru^II(dmso)₃ groups. XPS studies on Na-1 confirm the presence of 2 Ru^III and 6 Ru^II as well as 22 V^V and 2 V^IV centers. Magnetic susceptibility data on Na-1 show that the V^IV–Ru^III pairs are coupled antiferromagnetically, with J ₁ = −13 K and J ₂ ∼ −3 K. We did not detect any peak in our EPR measurements on Na-1, thus supporting the conclusion that Na-1 is diamagnetic in its ground state. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users. In Memoriam Prof. F. A. Cotton     

System Zn–Rh–O: heat capacity and Gibbs free energy of formation using differential scanning calorimeter and electrochemical cell

The standard molar Gibbs free energy of formation of ZnRh₂O₄(s) has been determined using an oxide solid-state electrochemical cell wherein calcia-stabilized zirconia (CSZ) was used as an electrolyte. The oxide cell can be represented by: . The electromotive force was measured in the temperature range from 943.9 to 1,114.2 K. The standard molar Gibbs energy of formation of ZnRh₂O₄(s) from elements in their standard state using the oxide electrochemical cell has been calculated and can be represented by: . Standard molar heat capacity C ^o _p,m(T) of ZnRh₂O₄(s) was measured using a heat flux-type differential scanning calorimeter in two different temperature ranges, from 127 to 299 and 307 to 845 K. The heat capacity in the higher temperature range was fitted into a polynomial expression and can be represented by: . The heat capacity of ZnRh₂O₄(s), was used along with the data obtained from the oxide electrochemical cell to calculate the standard enthalpy and entropy of formation of the compound at 298.15 K.     

Thermochemical Properties of Dissolution of Nicotinic Acid C<Subscript>6</Subscript>H<Subscript>5</Subscript>NO<Subscript>2</Subscript>(s) in Aqueous Solution

Nicotinic acid (also known as niacin) was recrystallized from anhydrous ethanol. X-ray crystallography was applied to characterize its crystal structure. The crystal belongs to the monoclinic system, space group P2₍₁₎/c. The crystal cell parameters are a = 0.71401(4) nm, b = 1.16195(7) nm, c = 0.71974(6) nm, α = 90°, β = 113.514(3)°, γ = 90° and Z = 4. Molar enthalpies of dissolution of the compound, at different molalities m/(mol·kg^?1) were measured with an isoperibol solution–reaction calorimeter at T = 298.15 K. The molar enthalpy of solution at infinite dilution was calculated, according to Pitzer’s electrolyte solution model and found to be \( \Delta_{\text{sol}} H_{m}^{\infty } = ( 2 7. 3 \pm 0. 2) \) kJ·mol^?1 and Pitzer’s parameters (\( \beta_{{\text{MX}}}^{{\text{(0)}L}} \), \( \beta_{{\text{MX}}}^{{\text{(1)}L}} \) and \( C_{{\text{MX}}}^{\phi L} \)) were obtained. The values of apparent relative molar enthalpies (\( {}^{\phi }L \)) and relative partial molar enthalpies (\( \overline{{L_{2} }} \) and \( \overline{{L_{1} }} \)) of the solute and the solvent at different molalities were derived from the experimental enthalpy of dissolution values of the compound. Also, the standard molar enthalpy of formation of the anion \( {\text{C}}_{ 6} {\text{H}}_{ 4} \text{NO}_{2}^{-} \) in aqueous solution was calculated to be \( {\Delta_{\text{f}}^{} H}_{\text{m}}^{\text{o}} ({\text{C}}_{ 6} {\text{H}}_{ 4} {\text{NO}}_{2}^{-} \text{,aq}) = - \left( {603.2 \pm 1.2} \right)\;{\text{kJ}}{\cdot}{\text{mol}}^{-1} \).     

Behavior of (La,Sr)CoO3- and La2NiO4-based ceramic anodes in alkaline media: compositional and microstructural factors

The behavior of dense ceramic anodes made of perovskite-type (x = 0.30–0.70; y = 0–0.05; z = 0–0.20) and K₂NiF₄-type (Me = Co, Cu; x = 0–0.20) indicates significant influence of metal hydroxide formation at the electrode surface on the oxygen evolution reaction (OER) kinetics in alkaline solutions. The overpotential of cobaltite electrodes was found to decrease with time, while cyclic voltammetry shows the appearance of redox peaks characteristic of Co(OH)₂/CoOOH. This is accompanied with increasing effective capacitance estimated from the impedance spectroscopy data, because of roughening of the ceramic surface. The steady-state polarization curves of in the OER range, including the Tafel slope, are very similar to those of model Co(OH)₂–La(OH)₃ composite films where the introduction of lanthanum hydroxide leads to decreasing electrochemical activity. La₂NiO₄-based anodes exhibit a low electrochemical performance and poor stability. The effects of oxygen nonstoichiometry of the perovskite-related phases are rather negligible at high overpotentials but become significant when the polarization decreases, a result of increasing role of oxygen intercalation processes. The maximum electrocatalytic activity to OER was observed for A-site-deficient , where the lanthanum content is relatively low and the Co⁴⁺ concentration determined by thermogravimetric analysis is highest compared to other cobaltites. Applying microporous layers made of template-synthesized nanocrystalline leads to an improved anode performance, although the effects of microstructure and thickness are modest, suggesting a narrow electrochemical reaction zone. Further enhancement of the OER kinetics can be achieved by electrodeposition of cobalt hydroxide- and nickel hydroxide-based films. Dedicated to Professor Dr. Yakov I. Tur’yan on the occasion of his 85th birthday.     

Chemiluminescent detection of DNA hybridization using gold nanoparticles as labels

A chemiluminescent (CL) detection method has been developed for DNA hybridization. The assay relies on a sandwich-type DNA hybridization in which gold nanoparticles modified with alkylthiol-capped oligonucleotide strands are used as probes to monitor the presence of the specific target DNA. The , which is the dissolving product of the gold nanoparticles anchored on the DNA hybrids, serves as an analyte in the H₂O₂–luminol– CL reaction for the indirect measurement of the target DNA. The combination of the remarkable sensitivity of the CL analysis with the large number of released from each DNA hybrid allows a detection limit at levels as low as 0.1 pM of the target DNA. Moreover, with a further silver amplification step, the detection limit will be pushed down to the femtomolar domain.      

Kinetics of heterogeneous decomposition of hydrogen peroxide

The kinetics of the decomposition of hydrogen peroxide was studied in aqueous medium in the temperature range 25–40°C in the presence of Wofatit KPS-resin in the form of Cu(II)-ammine complex ions. The rate constant was deduced at various degrees of resin cross-linkage and different concentrations of hydrogen peroxide. The order of the decomposition reaction varied from first order to half order, i.e., the order of the reaction decreased with increasing the concentration of H₂O₂. The decomposition process was found to be a catalytic reaction which was controlled by the chemical reaction of H₂O₂ molecules with the active species inside the resin particles. The mechanism of the reaction can be summarized by the equation in which the subsequent reactions of the probable active complex are discussed.     

Studies on structure and electrochemical properties of pillared M–MnO<Subscript>2</Subscript> (M=Ba<Superscript>2+</Superscript>, Sr<Superscript>2+</Superscript>, ZrO<Superscript>2+</Superscript>)

Supramolecular pillared oxides were prepared through the intercalation of M²⁺ cations into a MnO₂ host matrix by the method of ion exchange between the precursor δ-K _x MnO₂ and the corresponding guest. The materials M-MnO₂ crystallize in the hexagonal system, the same structure as the precursor, with a larger interlamellar spacing. In the case of ZrO-MnO₂, extended X-ray absorption fine structure (EXAFS) determination indicates that the Zr atom locates between the MnO₂ layers forming a stable structure. Compared with the precursor, the cycling property of M-MnO₂ was improved distinctly, while the capacity decreased to some degree due to the strong interaction between pillars and the host matrix. Among these pillared materials, ZrO-MnO₂ has an advanced reversible capacity of 161.5 mAh·g⁻¹ and improved cycling behavior compared with the precursor.     

Formation,characterization and stabilization of water-soluble colloidal MnO<Subscript>2</Subscript> in the oxidation of methionine,thiourea and thioacetamide by permanganate

Stabilization and characterisation of water soluble colloidal MnO₂ during the oxidation of sulphur-containing organic reductants “thiourea, thioactamide and methionine” by permanganate in aqueous neutral media are reported for the first time. Upon addition of permanganate to a solution of methionine, a transient species appears within the time of mixing, which is stable for several weeks. On the other hand, the transient species is unstable in the presence of thiourea and thioacetamide, respectively. The nature of manganese (IV) species present in the solution was characterized by spectrophotometric and coagulation measurements. On addition of HClO₄, there is a decrease in the absorbance of the reaction mixture. Under pseudo first-order conditions ([reductants] > []), the reduction rate was very fast up to the formation of water soluble colloidal MnO₂. The effect of various parameters, such as hydrogen ion concentration, amount of and concentration of reductants were investigated. Mechanisms consistent with the observed results have been proposed and discussed.     

Iodine Hydrolysis Equilibrium

The equilibrium constant for the hydrolytic disproportionation of I₂

Electrochemical study of the thermodynamics and kinetics of hydrophilic ion transfers across water | <Emphasis Type="Italic">n</Emphasis>-octanol interface

Thermodynamics and kinetics of hydrophilic ion transfers across water|n-octanol (W|OCT) interface have been electrochemically studied by means of novel three-phase and thin-film electrodes. Three-phase electrodes used for thermodynamics measurements comprise edge plane pyrolytic graphite, the surface of which was partly modified with an ultrathin film of OCT, containing hydrophobic lutetium bis(tetra-tert-butylphthalocyaninato) (Lu[tBu₄Pc]₂) as a redox probe. The transfers of anions and cations from W to OCT were electrochemically driven by reversible redox transformations of Lu[tBu₄Pc]₂ to chemically stable lipophilic monovalent cation and anion , respectively. Upon reduction of Lu[tBu₄Pc]₂, the transfers of alkali metal cations from W to OCT have been studied for the first time, enabling estimation of their Gibbs transfer energies. For kinetic measurements, a thin-film electrode configuration has been used, consisting of the same electrode covered completely with a thin layer of OCT that contained the redox probe and a suitable electrolyte. Combining the fast and sensitive square-wave voltammetry with thin-film electrodes, the kinetics of , , and Cl⁻ transfers have been estimated. Dedicated to Professor Dr. Yakov I. Tur’yan on the occasion of his 85th birthday.     

Synthesis and characterization of poly(lactic acid) and glucosamine-formaldehyde/dodecylbenzenesulfonate composite films

The composite films of poly(lactic acid) (PLA) doped with glucosamine(Gluc)-formaldehyde(FA) polymer/sodium dodecylbenzenesulfonate (SDBS) complexes at 1–5 wt% were synthesized to demonstrate striking improvement of their structural and mechanical properties. The polymer complexes were obtained by the hydrothermal polymerization of Gluc and FA at a molar ratio of 1:2 in the presence of SDBS. The atomic ratios of S in to N in (=S/N) in the polymer complexes limitedly range from 0.52 to 0.69, indicating that the complexation develops through the nonstoichiometric reaction between groups of (Gluc-FA) polymer and ones of SDBS and 31–48% of the groups remain unbound. The PLA composite film doped with 1 wt% (Gluc-FA)/SDBS showed the elongation-at-break of as large as 194% compared with 37% for PLA film, together with an appreciable increase of the crystallites size (D ₂₀₀) of PLA from 21.8 to 33.3 nm.     

Removal of Nitrogen and Organic Matter in a Radial-Flow Aerobic-Anoxic Immobilized Biomass Reactor Used in the Posttreatment of Anaerobically Treated Effluent

This work reports on the removal of organic matter and nitrogen in a radial-flow aerobic-anoxic immobilized biomass (RAIB) reactor fed with domestic sewage pretreated in a horizontal-flow anaerobic immobilized biomass (HAIB) reactor. Polyurethane foam was used as support material for biomass attachment in both reactors. In batch experiments, a first-order kinetic model with residual concentration represented the organic matter removal rate, whereas nitrogen conversion followed a pseudo-first-order reaction in series model, with kinetic constants k ₁ (ammonium to nitrite) and k ₂ (nitrite to nitrate) of 0.25 and 6.62 h⁻¹, respectively. The RAIB reactor was operated in continuous-flow mode and changes in the airflow rate and hydraulic retention time were found to interfere in the apparent kinetic constants to the nitritation (k ₁) and nitratation (k ₂). Nitrification and denitrification were achieved in the partially aerated RAIB reactor operating with hydraulic retention times of 3.3 h and 2.7 h in the aerobic and anoxic zones, respectively. Ethanol was added in the anoxic zone of the reactor to promote denitrification. The effluent flow of the RAIB reactor presented a COD of 52 mg l⁻¹, and concentrations of 2 mg , 1.24 mg and 3.46 mg .     

A Pitzer Model for Lead Oxide Solubilities in the Presence of Borate to High Ionic Strength

In this study, a hydrolysis model for lead, applicable to high ionic strength, is developed based on lead oxide solubilities as a function of ionic strength. Solubility measurements on lead oxide, α-PbO (tetragonal, red), mineral name litharge, as a function of ionic strength were conducted in NaClO₄ solutions up to I?=?0.45 mol·kg^?1, in NaCl solutions up to I?=?5.0 mol·kg^?1, and in Na₂SO₄ solutions up to I?=?5.4 mol·kg^?1, at room temperature (22.5?±?0.5 °C). The lead hydroxyl species considered in this work include the following,

$$ {\text{PbO}}\left( {\text{cr}} \right) \, + {\text{ 2H}}^{ + } \rightleftharpoons {\text{Pb}}^{ 2+ } + {\text{ H}}_{ 2} {\text{O}}\left( {\text{l}} \right) $$

(1)

$$ {\text{Pb}}^{ 2+ } + {\text{ H}}_{ 2} {\text{O}}\left( {\text{l}} \right) \rightleftharpoons {\text{PbOH}}^{ + } + {\text{ H}}^{ + } $$

(2)

$$ {\text{Pb}}^{ 2+ } + {\text{ 2H}}_{ 2} {\text{O}}\left( {\text{l}} \right) \rightleftharpoons {\text{Pb}}\left( {\text{OH}} \right)_{ 2} \left( {\text{aq}} \right) \, + {\text{ 2H}}^{ + } $$

(3)

$$ {\text{Pb}}^{ 2+ } + {\text{ 3H}}_{ 2} {\text{O}}\left( {\text{l}} \right) \rightleftharpoons {\text{Pb(OH}})_{3}^{ - } + 3{\text{H}}^{ + } $$

(4)

The equilibrium constants for Reactions (1) and (2) were taken from literature. The equilibrium constants in base 10 logarithmic units for Reactions (3) and (4) are determined in this study as ? 17.05?±?0.10 (2σ) and ? 27.99?±?0.15 (2σ), respectively, with a set of Pitzer parameters describing the interactions with Na⁺, Cl^?, and \( {\text{SO}}_{4}^{2 - } .\) In combination with the parameters from literature including those that have already been published by our group, the solution chemistry of lead in a number of media including NaCl, MgCl₂, NaHCO₃, Na₂CO₃, Na₂SO₄, NaClO₄, and their mixtures, can be accurately described in a wide range of ionic strengths.

     

Nickel surface anodic oxidation and electrocatalysis of oxygen evolution

The processes of nickel surface anodic oxidation taking place within the range of potentials preceding oxygen evolution reaction (OER) in the solutions of 1 M KOH, 0.5 M K₂SO₄, and 0.5 M H₂SO₄ have been analyzed in the present paper. Metallic nickel, thermally oxidized nickel, and black nickel coating were used as Ni electrodes. The methods of cyclic voltammetry and X-ray photoelectron spectroscopy were employed. The study was undertaken with a view to find the evidence of peroxide-type nickel surface compounds formation in the course of OER on the Ni electrode surface. On the basis of experimental results and literature data, it has been suggested that in alkaline solution at E ≈ 1.5 V (RHE) reversible electrochemical formation of Ni(IV) peroxide takes place according to the reaction as follows: This reaction accounts for both the underpotential (with respect to ) formation of O₂ from NiOO₂ peroxide and also small experimental values of dE/dlgi slope (<60 mV) at low anodic current densities, which are characteristic for the two-electron transfer process. It has been inferred that the composition of the γ-NiOOH phase, indicated in the Bode and revised Pourbaix diagrams, should be ∼5/6 NiOOH + ∼1/6 NiOO₂. The schemes demonstrating potential-dependent transitions between Ni surface oxygen compounds are presented, and the electrocatalytic mechanisms of OER in alkaline, acid, and neutral medium have been proposed.     

Catenated Gallium Compounds Supported by a<Emphasis Type="Italic"> Tris</Emphasis>(pyrazolyl)hydroborato Ligand

[ \textTp^\textMe₂ {\text{Tp}}^{{{\text{Me}}_{2} }} ]M (M = K, Tl) reacts with “GaI” to give a series of compounds that feature Ga–Ga bonds, namely [ \textTp^\textMe₂ {\text{Tp}}^{{{\text{Me}}_{2} }} ]Ga→GaI₃, [ \textTp^\textMe₂ {\text{Tp}}^{{{\text{Me}}_{2} }} ]GaGaI₂GaI₂( \textHpz^\textMe₂ {\text{Hpz}}^{{{\text{Me}}_{2} }} ) and [ \textTp^\textMe₂ {\text{Tp}}^{{{\text{Me}}_{2} }} ]Ga(GaI₂)₂Ga[ \textTp^\textMe₂ {\text{Tp}}^{{{\text{Me}}_{2} }} ], in addition to the cationic, mononuclear Ga(III) complex {[ \textTp^\textMe₂ {\text{Tp}}^{{{\text{Me}}_{2} }} ]₂Ga}⁺. Likewise, [ \textTp^\textMe₂ {\text{Tp}}^{{{\text{Me}}_{2} }} ]M (M = K, Tl) reacts with (HGaCl₂) ₂ and Ga[GaCl₄] to give [ \textTp^\textMe₂ {\text{Tp}}^{{{\text{Me}}_{2} }} ]Ga→GaCl₃, {[ \textTp^\textMe₂ {\text{Tp}}^{{{\text{Me}}_{2} }} ]₂Ga}[GaCl₄], and {[ \textTp^\textMe₂ {\text{Tp}}^{{{\text{Me}}_{2} }} ]GaGa[ \textTp^\textMe₂ {\text{Tp}}^{{{\text{Me}}_{2} }} ]}[GaCl₄]₂. The adduct [ \textTp^\textMe₂ {\text{Tp}}^{{{\text{Me}}_{2} }} ]Ga→B(C₆F₅)₃ may be obtained via treatment of [ \textTp^\textMe₂ {\text{Tp}}^{{{\text{Me}}_{2} }} ]K with “GaI” followed by addition of B(C₆F₅)₃. Comparison of the deviation from planarity of the GaY₃ ligands in [ \textTp^\textMe₂ {\text{Tp}}^{{{\text{Me}}_{2} }} ]Ga→GaY₃ (Y = Cl, I) and [ \textTm^{\textBu\textt} {\text{Tm}}^{{{\text{Bu}}^{\text{t}} }} ]Ga→GaY₃, as evaluated by the sum of the Y–Ga–Y bond angles, Σ(Y–Ga–Y), indicates that the [ \textTm^{\textBu\textt} {\text{Tm}}^{{{\text{Bu}}^{\text{t}} }} ]Ga moiety is a marginally better donor than [ \textTp^\textMe₂ {\text{Tp}}^{{{\text{Me}}_{2} }} ]Ga. In contrast, the displacement from planarity for the B(C₆F₅)₃ ligand of [ \textTp^\textMe₂ {\text{Tp}}^{{{\text{Me}}_{2} }} ]Ga→B(C₆F₅)₃ is greater than that of [ \textTm^{\textBu\textt} {\text{Tm}}^{{{\text{Bu}}^{\text{t}} }} ]Ga→B(C₆F₅)₃, an observation that is interpreted in terms of interligand steric interactions in the former complex compressing the C–B–C bond angles.