基于多壁碳纳米管和聚丙烯胺层层自组装的葡萄糖生物传感器

经混酸处理后的多壁碳纳米管(MWCNTs)末端及侧壁带有含氧基团,能与阳离子聚电解质通过静电作用结合,也能与酶蛋白非特异性结合。利用层层自组装法在铂(Pt)电极表面构建了聚丙烯胺(PAA)-MWC-NTs-葡萄糖氧化酶(GOx)膜,研究了自组装薄膜的表面微观形貌和电化学性质。组装层数为6层时最优,对葡萄糖响应线性范围为5.0×10-4~2.10×10-2mol/L;检出限为1.0×10-4mol/L(S/N=3);灵敏度为4.95μA/(mmolcm2),响应时间3.80s;GOx表观米氏常数为17.79mmol。对抗坏血酸等具有较强的抗干扰能力,10天后电极响应电流保持最初的91.79%。3次平行实验的RSD为4.85%。     

Spatial Architecture of Modified Carbon Nanotubes/Electrochemically Reduced Graphene Oxide Nanomaterial for Fast Electron Transfer. Application in Glucose Biosensor

Electron transfer (ET) reactions in bioelectrocatalysis of enzymes at electrode surfaces require not only the efficient immobilization, but also highly conductive nanostructured platform, which allows for retaining its bioactivity and structural conformation. The novel architecture of spatially separated electrochemically reduced graphene oxide (ERGO) by multi‐walled carbon nanotubes functionalized with 4‐(pyrrole‐1‐yl) benzoic acid (MWCNT/PyBA) with the accurate porous structure could be an alternative for earlier approaches to the construction of bioelectrocatalytic systems with rapid diffusion of reagents from the solution to the enzyme molecule. The formation of ERGO/MWCNT/PyBA system was confirmed by electrochemical, spectroscopic and microscopic methods. The cyclic voltammetry experiments revealed that the presence of ERGO in the conductive material affects the electronic communication between the enzyme molecule and modified electrode surface greatly improving its ET properties resulting in a double increase of the heterogeneous ET rate constant value (k_s=6.5 s^?1). The fabricated glucose oxidase based biosensor sensitively detects glucose, therefore, ERGO/MWCNT/PyBA architecture could provide a novel and efficient platform for immobilization of redox enzymes.     

New Nanocomposite Based on Prussian Blue Nanoparticles/Carbon Nanotubes/Chitosan and Its Application for Assembling of Amperometric Glucose Biosensor

Abstract

A new nanocomposite was developed by combination of prussian blue (PB) nanoparticles and multiwalled carbon nanotubes (MWNTs) in the matrix of biopolymer chitosan (CHIT). The PB and MWNTs had a synergistic electrocatalytic effect toward the reduction of hydrogen peroxide. The CHIT/MWNTs/PB nanocomposite‐modified glassy carbon (GC) electrode could amplify the reduction current of hydrogen peroxide by ～35 times compared with that of CHIT/MWNTs/GC electrode and reduce the response time from ～60 s for CHIT/PB/GC to 3 s. Besides, the CHIT/MWNTs/PB nanocomposite‐modified GC electrode could reduce hydrogen peroxide at a much lower applied potential and inhibit the responses of interferents such as ascorbic acid (AA) uric acid (UA) and acetaminophen (AC). With glucose oxidase (GOx) as an enzyme model, a new glucose biosensor was fabricated. The biosensor exhibited excellent sensitivity (the detection limit is down to 2.5 µM), fast response time (less than 5 s), wide linear range (from 4 µM to 2 mM), and good selection.     

Avidin and Glucose Oxidase‐non‐covalently Functionalized Multi‐walled Carbon Nanotubes: A New Analytical Tool for Building a Bienzymatic Glucose Biosensor

We report an innovative supramolecular architecture for bienzymatic glucose biosensing based on the non‐covalently functionalization of multi‐walled carbon nanotubes (MWCNTs) with two proteins, glucose oxidase (GOx) (to recognize glucose) and avidin (to allow the specific anchoring of biotinylated horseradish peroxidase (b‐HRP)). The optimum functionalization was obtained by sonicating for 10 min 0.50 mg mL^?1 MWCNTs in a solution of 2.00 mg mL^?1 GOx+1.00 mg mL^?1avidin prepared in 50 : 50 v/v ethanol/water. The sensitivity to glucose for glassy carbon electrodes (GCE) modified with MWCNTs‐GOx‐avidin dispersion and b‐HRP (GCE/MWCNTs‐GOx‐avidin/b‐HRP), obtained from amperometric experiments performed at ?0.100 V in the presence of 5.0×10^?4 M hydroquinone, was (4.8±0.3) μA mM^?1 (r²=0.9986) and the detection limit was 1.2 μM. The reproducibility for 5 electrodes using the same MWCNTs/GOx‐avidin dispersion was 4.0 %, while the reproducibility for 3 different dispersions and 9 electrodes was 6.0 %. The GCE/MWCNT‐GOx‐avidin/b‐HRP was successfully used for the quantification of glucose in a pharmaceutical product and milk.     

超细银－金复合颗粒增强酶生物传感器的研究

用琥珀酸二异辛酯磺酸钠／环已烷反胶束体系合成憎水纳米银－金复合颗粒， 并用此纳米银－金颗粒与聚乙烯醇缩丁醛构成复合固酶模基质，用溶胶－凝胶法固 定葡萄糖氧化酶，构建葡萄糖生物传感器。实验表明，纳米憎水银－金颗粒可以大 幅度提高固定化酶的催化活性，响应电流从相应浓度的几十纳安增强几万纳安。探 讨了纳米颗粒效应在固定化酶中所起的作用，为纳米颗粒在生物传感器领域中的应 用提供了可参考的实验和理论依据。     

Glucose Biosensor Based on the Use of a Carbon Nanotube Paste Electrode Modified with Metallic Particles

This work reports on the performance of new glucose biosensors based on the combination of the electrocatalytic properties of metals and carbon nanotubes towards the reduction of hydrogen peroxide with the biocatalytic activity of glucose oxidase (GOx). The bioelectrodes were obtained by dispersing the metal particles, enzyme and multi-wall carbon nanotubes within a mineral oil binder. The strong electrocatalytic activity of copper and iridium towards the reduction of hydrogen peroxide has made possible an important improvement in the sensitivity for the determination of glucose compared to the carbon nanotube composite without metals. A highly sensitive and selective amperometric detection of glucose becomes possible at very low potentials (−0.100 V). The presence of the protein enables a better dispersion of the metals within the composite matrix, thus allowing an additional enhancement in the response to hydrogen peroxide. The influence of the amount of copper in the composite on the analytical performance of the bioelectrode is discussed. A biosensor containing 0.77% w/w Cu and 10.0% w/w GOx gave a fast response (10.0 s), a linear relationship between current and glucose concentration up to 1.20 × 10⁻² M, and a detection limit of 2.0 × 10⁻⁵ M. A similar behavior was found for a carbon nanotube-composite electrode containing iridium.     

基于二氧化钛/碳纳米管/壳聚糖纳米复合薄膜制备葡萄糖生物传感器

利用壳聚糖(CHI)溶液分散了纳米二氧化钛(nano-TiO2)和多壁碳纳米管(MWCNT),将该分散液修饰于玻碳电极表面形成纳米复合薄膜;用戊二醛为交联剂在该纳米复合层上固定了葡萄糖氧化酶(GOx),同时以二茂铁为电子媒介体构建了一种新型葡萄糖传感器。利用扫描电镜(SEM)、交流阻抗(AC)对所制备的传感器进行了表征,同时用循环伏安法(CV)和计时电流法(CA)考察了其对葡萄糖的电催化氧化性能。实验结果表明,在优化测试条件下该传感器对葡萄糖在0.5～20.0 mmol.L-1范围内有线性响应,检出限为0.2 mmol.L-1;电流达到95%的稳态时间小于5 s;此生物传感器具有良好的重现性和选择性,能有效排除抗坏血酸、尿酸等常见干扰物的影响并成功应用于饮料中葡萄糖含量的测定。     

层层自组装制备基于多壁碳纳米管的胆碱生物传感器

以经混酸处理的多壁碳纳米管(MWCNTs)修饰铂(Pt)电极,在此基础上固定(PAA/PVS)3复合膜,采用层层自组装技术将高分子聚电解质PDDA与胆碱氧化酶交替组装在已修饰的电极上,构建了电流型胆碱生物传感器。实验结果表明,MWCNTs的引入使电极对H2O2的催化电流明显增大,制成的酶电极可以有效控制酶量的使用,酶膜组装层数为8时最优,对胆碱的线性响应范围为5×10-7～1×10-4mol/L;灵敏度为12.53μA/mmol;响应时间为7.60s;检出限为2×10-7mol/L(S/N=3)。传感器的抗干扰能力强,稳定性好,30d时的响应电流值仍保持最初的89.5%。3次平行实验的RSD为3.64%。     

羧基化碳纳米管修饰的安培型葡萄糖传感器测定血液中葡萄糖

在临床医学、生物过程、食品工业中葡萄糖的分析测定一直都占有重要地位。葡萄糖的测定以分光光度法[1]和酶电极法[2]为主。光度法的灵敏度和准确度低,选择性差。第一代酶电极通常采用分子氧作为电子媒介体,但此法背景电流大,易受环境中分子氧浓度的影响。逐渐发展起来的第二代     

Glassy Carbon Electrodes Modified with Multiwall Carbon Nanotubes Dispersed in Polylysine

We report the analytical performance of glassy carbon electrodes (GCE) modified with a dispersion of multiwall carbon nanotubes (MWCNT) in polylysine (Plys) (GCE/MWCNT‐Plys). The resulting electrodes show an excellent electrocatalytic activity towards different bioanalytes like ascorbic acid, uric acid and hydrogen peroxide, with important decrease in their oxidation overvoltages. The dispersion of 1.0 mg/mL MWCNT in 1.0 mg/mL polylysine is highly stable, since after 2 weeks the sensitivity for hydrogen peroxide at GCE modified with this dispersion remained in a 90% of the original value. The MWCNT‐Plys layer immobilized on glassy carbon electrodes has been also used as a platform to build supramolecular architectures by self‐assembling of polyelectrolytes based on the polycationic nature of the polylysine used to disperse the nanotubes. The self‐assembling of glucose oxidase has allowed us to obtain a supramolecular multistructure for glucose biosensing. The influence of glucose oxidase concentration and adsorption time as well as the effect of using polylysine or MWCNT‐Plys as polycationic layers for further adsorption of GOx is also evaluated.     

纳米ZnO增强葡萄糖生物传感器的制备和应用

为提高葡萄糖生物传感器的灵敏度,以纳米ZnO与聚乙烯醇缩丁醛(PVB)构成复合固定酶膜基质,采用溶胶-凝胶法固定葡萄糖氧化酶(GOD),用戊二醛进行交联,制成葡萄糖生物传感器。实验结果表明,GOD可牢固地固定在电极表面,在相同葡萄糖浓度下,加入纳米颗粒的电极的电流响应值比未加颗粒的高约100倍,电极重复使用46次后电流响应值仅下降到初始的70%。电极制备方法简单,易于操作。同时对温度、溶液pH值以及溶剂对电极的影响进行了研究,获得了最优的实验条件。     

碳纳米管负载铂颗粒酶电极葡萄糖传感器

以碳纳米管负载纳米铂颗粒修饰玻碳电极 (CNT Pt/GCE)为基底 ,用明胶固定葡萄糖氧化酶(GOD) ,构建了电流型葡萄糖生物传感器 (GOD/CNT Pt/GCE)。在实验中 ,GOD/CNT Pt/GCE显示了良好的分析性能 ,与常规铂电极葡萄糖传感器 (GOD/Pt)相比较 ,测定葡萄糖的检出限从 6 .7× 10 -3 mol/L下降到8.3× 10 -4mol/L ;工作电位从 0 .6 5V下降至 0 .4 5V ;响应时间从 30s下降至 5s左右。实验结果表明 ,具有高度电催化活性的CNT Pt/GCE可作为酶传感器的一种新型基体电极。     

基于多壁碳纳米管和氧化锌纳米棒复合物的葡萄糖生物传感器(英文)

利用多壁碳纳米管(MWCNTs)和氧化锌(ZnO)纳米棒复合物膜构建了一种新的电流型葡萄糖生物传感器。MWCNTs-ZnO复合物在超声协助下通过静电配位的方式产生。其中,ZnO纳米棒的存在加强了该复合物催化氧化H2O2的能力,增加了响应电流。与单一的MWCNTs和ZnO相比,这种纳米复合物显示了更为有效地电催化活性。在此基础上,我们以MWCNTs-ZnO复合物膜为基底,用戊二醛交联法固定葡萄糖氧化酶,电聚合邻苯二胺(PoPD)膜为抗干扰层,构建了抗干扰能力强,稳定性好,灵敏度高,响应快的葡萄糖传感器。在+0.8V的检测电位下,该传感器对葡萄糖响应的线性范围为5.0×10-6~5.0×10-3mol·L-1(R=0.997),检测限为3.5×10-6mol·L-1(S/N=3),响应时间小于10s的葡萄糖生物传感器,常见干扰物质如抗坏血酸和尿酸不影响测定。     

A New Amperometric Glucose Biosensor with Naphthol Green B as Mediator

Naphthol green B was used, for the first time, as a new mediator in an amperometric glucose biosensor. It is a good mediator, promoting electron transfer from glucose oxidase to graphite electrode. The biosensor shows high sensitivity to glucose at low potential with response time of 30 seconds. The linear range is from 1.5 to 18μmol/L glucose with detection limit of 0.5μmol/L glucose.     

A Mediator‐Free Bienzyme Amperometric Biosensor Based on Horseradish Peroxidase and Glucose Oxidase Immobilized on Carbon Nanotube Modified Electrode

Multiwalled carbon nanotube (CNT) modified glassy carbon electrode immobilized with horseradish peroxidase (HRP) in Nafion coating showed direct electron transfer between HRP enzyme and the CNT‐modified electrode. A mediator‐free bienzyme glucose biosensor based on horseradish peroxidase and glucose oxidase was constructed. The bienzyme biosensor exhibited a high sensitivity for glucose detection at zero applied potential.     

一种基于碳纳米管的安培型过氧化氢生物传感器

利用硫堇(th ion ine,Th i)作为介体结合多壁碳纳米管(MWNTs)、壳聚糖(ch itosan,CH IT)、辣根过氧化酶(HRP)的混合包埋物制作过氧化氢(H2O2)生物传感器。研究结果表明所得传感器对H2O2具有明显的增敏效应,线性范围为0.03~5.5 mmol/L,相关系数为0.9995;检出限为19μmol/L(S/N=3),具有良好的稳定性及工作寿命。     

铂纳米颗粒修饰直立碳纳米管电极的葡萄糖生物传感器

基于Pt纳米颗粒修饰直立的碳纳米管电极制备了葡萄糖生物传感器.铂纳米颗粒是利用电位脉冲沉积法修饰到直立碳纳米管上的,可以增强电极对酶反应过程当中产生的过氧化氢的催化行为.用扫描电镜和透射电镜观察了直立碳纳米管在修饰Pt纳米颗粒前后的形态.该酶电极对葡萄糖的氧化表现出很好的响应,线性范围为1×10-5～7×10-3mol/L,响应时间小于5s,并且有很好的重现性.     

Amperometric Glucose Biosensor Based on Ultrafine Platinum Nanoparticles

Abstract

In the present paper the ultrafine and highly dispersed platinum nanoparticles (average size 3 nm) were used for the construction of a glucose biosensor in a simple method. An excellent response to glucose has been obtained with a high sensitivity (137.7 µA mM^?1 cm^?2) and fast response time (5 s). The biosensor showed a detection limit of 5 µM (at the ratio of signal to noise, S/N=3) and a linear range form 0.2 to 3.2 mM with a correlation coefficient r=0.999. The apparent Michaelis–Menten constant (k _m) and the maximum current were estimated to be 9.36 and 1.507 mA mM^?1 cm^?2, respectively. In addition, effects of pH value, applied potential and the interferents on the amperometric response of the sensor were investigated and discussed.     

二茂铁功能化Fe3O4/碳纳米管/壳聚糖复合膜葡萄糖生物传感电极的研究

采用交联法制备了羧基二茂铁功能化Fe₃O₄纳米粒子（FMC-AFNPs）复合材料,并将该复合纳米材料与多壁碳纳米管（MWNTs）、壳聚糖（CS）及葡萄糖氧化酶（GOD）混合修饰于自制的磁性玻碳基底(MGC)表面,制备了GOD/FMC-AFNPs/MWNTs/CS复合膜生物传感器电极. 实验结果表明,FMC-AFNPs复合材料有效地克服了二茂铁在电极表面的泄漏,且FMC-AFNPs/MWNTs/CS复合膜良好的生物兼容性较大地改善了固定化GOD的生物活性. MWNTs具有良好的导电性和大比表面积,在修饰膜内可作为电子传递“导线”,极大地促进电极的电子传递速率,提高电极的电催化活性和灵敏度. 该电极的葡萄糖检测的线性范围为1.0×10^-5 ~ 6.0×10^-3 molL^-1,检测限为3.2×10^-6 mmolL^-1（S/N=3）,表观米氏常数为5.03×10^-3 mmolL^-1,且有较好的稳定性和重现性.     

Nanomolar Detection of Glutamate at a Biosensor Based on Screen-Printed Electrodes Modified with Carbon Nanotubes

The amperometric glutamate biosensor based on screen-printed electrodes containing carbon nanotubes (CNT), and its integration in a flow injection analysis system, is described herein. The sensor was fabricated by simply adsorbing enzyme glutamate oxidase (GlutOx) on a commercial substrate containing multi-wall CNT. The resulting device displayed excellent electroanalytical properties toward the determination of L-glutamate in a wide linear range (0.01-10 μM) with low detection limit (10 nM, S/N≥3), fast response time (≤5 s), and good operational and long-term stability. The CNT modified screen-printed electrodes have a potential to be of general interest for designing of electrochemical sensors and biosensors.