首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 31 毫秒
1.
The vibro-acoustic responses and sound absorption characteristics of two kinds of periodically stiffened micro-perforated plates are analyzed theoretically. The connected periodical structures of the stiffened plates can be ribs or block-like structures. Based on fundamental acoustic formulas of the micro-perforated plate of Maa and Takahashi, semi-analytical models of the vibrating stiffened plates are developed in this paper. Approaches like the space harmonic method, Fourier transforms and finite element method (FEM) are adopted to investigate both kinds of the stiffened plates. In the present work, the vibro-acoustic responses of micro-perforated stiffened plates in the wavenumber space are expressed as functions of plate displacement amplitudes. After approximate numerical solutions of the amplitudes, the vibration equations and sound absorption coefficients of the two kinds of stiffened plates in the physical space are then derived by employing the Fourier inverse transform. In numerical examples, the effects of some physical parameters, such as the perforation ratio, incident angles and periodical distances etc., on the sound absorption performance are examined. The proposed approaches are also validated by comparing the present results with solutions of Takahashi and previous studies of stiffened plates. Numerical results indicate that the flexural vibration of the plate has a signif- icant effect on the sound absorption coefficient in the water but has little influence in the air.  相似文献   

2.
本文主要研究了水下无穷大双周期加筋微穿孔薄板,在平面声波斜入射下的振动响应和声透射,并提出了一种半解析半数值的计算方法。利用微穿孔板的声阻抗以及薄板表面的振速边界条件,建立了加筋穿孔薄板的振动方程,并根据傅立叶变换及空间波数法将振动位移表达为波数分量的迭加形式。采用数值计算的方法对波数分量进行求解并通过傅里叶逆变换,最终得到了双周期加筋穿孔薄板的振动响应及透射系数。通过与Takahashi穿孔板声压结果的对比,证明了本方法的正确性。在算例中,分析了加强筋及穿孔率对薄板结构的振动和声透射的影响。  相似文献   

3.
研究在平面声波斜入射情况下,无穷大双周期加筋的微穿孔薄板结构的振动响应及吸声性能.首先在马大猷和Takahashi微穿孔板声学理论基础上,建立了微穿孔加筋薄板结构振动的半解析模型;然后应用傅里叶变换及空间波数分析方法,将周期加筋微穿孔薄板的振动位移及辐射声压表示为频域内波数的分量迭加形式;最后通过对波数分量进行求解,并利用傅里叶逆变换得到双周期加筋的微穿孔薄板的振动响应及吸声系数表达式.计算结果表明,薄板的弯曲振动在水中对吸声的影响较大,空气中仅对轻质穿孔板的低频吸声效果有一定影响;同时微穿孔率对周期加筋薄板吸声系数的影响明显,通过改变穿孔率和加筋周期等可有效地提高水中微穿孔薄板结构的吸声性能.  相似文献   

4.
研究了流体负载下的无穷大双周期加强板, 在周期谐振力作用下的振动响应和声辐射,并提出了一种基于有限元和空间波数法的半解析半数值方法. 首先利用有限元的方法对周期结构进行单元离散, 并将结构对薄板的作用力等效为节点力的作用. 然后通过周期结构的振动方程, 结合薄板与结构的位移边界条件, 建立了节点力与薄板节点位移的函数方程. 最后应用空间波数法和傅里叶变换, 并采用数值计算的方法求解出薄板的节点位移, 得到了周期加强板关于离散节点位移的振动和辐射声压方程. 在数值算例中, 对该方法的正确性进行了验证, 并且分析了周期结构对薄板的振动和声辐射的影响.  相似文献   

5.
A semi-analytical method based on space harmonics to investigate the vibration of and sound radiation from an infinite,fluid-loaded plate is presented.The plate is reinforced with two sets of orthogonally and equally spaced beam stiffeners,which are assumed to be line forces.The response of the stiffened plate to a convected harmonic pressure in the wave-number space is obtained by adopting the Green’s function and Fourier transform methods.Using the boundary conditions and space harmonic method,we establish the relationship between the stiffener forces and the vibration displacement of the plate.In this paper,the stiffener forces are expressed in terms of harmonic amplitudes of the plate displacement,which are calculated by using a numerical reduction technique.Finally,the Fourier inverse transform is employed to find expressions of the vibration and sound radiation in physical space.Agreements with existing results prove the validity of this approach and more numerical results are presented to show that this method converges rapidly.  相似文献   

6.
The present work deals with the aeroacoustic sound radiated by a forward–backward facing step in combination with a flexible wall behind the step. A numerical flow computation with coupled aeroacoustic and vibroacoustic simulation was carried out. The structural deformations of the oscillating plate like structure in the wake of the forward–backward facing step were considered to be small and therefore not affecting the flow field. The presented approach enables a separate consideration for the aeroacoustic as well as the structural borne noise. The influence of the interactions of the acoustic medium with the flexible structure on the vibroacoustic sound radiation is investigated. One-sided and two-sided coupling approaches for the vibroacoustic analysis are introduced. The two-sided vibroacoustic computation allows for considering the damping influence of the ambient fluid on the flexible plate vibration and therefore on the sound radiation. Additional to the simulations, aeroacoustic measurements in an acoustic wind tunnel were performed for validation purposes.  相似文献   

7.
An approach is presented to study the nonlinear forced vibration of a stiffened plate. The stiffened plate is divided into one plate and some stiffeners, with the plate considered to be geometrically nonlinear, and the stiffeners taken as geometrically nonlinear Euler beams. Assuming the displacement of the stiffened plate, Lagrange equation and modal superposition method are used to derive the dynamic equilibrium equations of the stiffened plate according to energy of the system. A stiffened plate with four clamped edges subjected to harmonic excitation is studied by means of the method of multiple scales; the first approximation solutions of the double-modal motion of the system are obtained. Numerical examples for different stiffened plates are presented to discuss the steady response of the primary resonance and the amplitude?Cfrequency relationship; and some nonlinear forced vibration characteristics of the stiffened plate are obtained, which are useful for engineering design.  相似文献   

8.
本文主要研究了流体负载下敷设去耦阻尼层的加筋板,在外界激励力作用下的振动和声辐射,推导出了敷设去耦层有限长加筋板的振动响应和水下辐射噪声近似解析解。采用弹性理论来描述去耦层,并采用模态迭加理论构造响应函数,将加强筋等效为线力的作用,以复模量形式计及去耦阻尼层损耗因子,建立了敷设去耦阻尼层加筋板的理论解析模型,结合加筋板与去耦层变形连续条件、结构与流体连续性条件组成了声-流体-结构的耦合方程,结合数值计算方法,得到了有限长加筋板结构的振动位移及水下辐射噪声。开展相应数值算例与模型试验结果吻合较好,验证本文方法的正确性。  相似文献   

9.
An analytical model is developed to investigate the sound transmission loss from orthogonally rib-stiffened double laminated composite plates structure under a plane sound wave excitation, in which first order shear deformation theory is presented for laminated composite plates. By using the space harmonic approach and virtual work principle, the sound transmission loss is described analytically. The validity and feasibility of the model are verified by comparing the present theoretical predictions with numerical results published previously. The influences of structure geometrical parameters on sound transmission loss are subsequently presented. Through numerical results, it can be concluded that the proposed analytical model is accurate and simple in solving the vibroacoustic behavior of an orthogonally rib-stiffened double laminated composite plates.  相似文献   

10.
曲线加筋Kirchhoff-Mindlin板自由振动分析   总被引:2,自引:2,他引:0  
相比传统加筋板,曲线加筋板能够更充分地发挥材料力学性能.在加筋板力学分析中,厚板通常采用Reissner-Mindlin理论,然而当板厚较薄时易出现剪切自锁,离散的Kirchhoff-Mindlin理论采用假设剪切应变场可避免该问题.针对曲线加筋Kirchhoff-Mindlin板自由振动分析,采用离散的Kirchhoff-Mindlin三角形单元和Timoshenko曲梁单元分别模拟板和加强筋,根据板的位移插值函数及筋板交界面的位移协调条件,建立基于板单元位移自由度的有限元方程.为了验证方法的有效性和准确性,采用直线加筋薄板、曲线加筋薄板和厚板3种模型进行算例研究,通过收敛性和精度分析来选择合理的有限元网格密度.直线加筋薄板前20阶固有频率均与文献结果吻合良好;曲线加筋板算例中,本文方法满足收敛条件的板单元数目为2469,Nastran模型板单元数目为6243;本文所得曲线加筋板固有频率与Nastran计算结果最大误差为3.4%.研究结果表明,本文方法无需筋板单元共节点,可使用较少的有限元网格数量,并能够保证计算精度;在离散Kirchhoff-Mindlin三角形板单元基础上构造Timoshenko梁单元可同时适用于曲线加筋薄板与厚板自由振动分析.  相似文献   

11.
蜂窝层芯夹层板结构振动与传声特性研究   总被引:6,自引:0,他引:6  
蜂窝层芯夹层板应用于飞行器、高速列车等交通工具的主体及底板结构时需要考虑其振动及隔声特性. 针对声压激励下的四边简支蜂窝层芯夹层板结构,应用基于Reissner夹层板理论的结构振动方程建立了的声振耦合理论模型(声压以简支模态双级数的形式引入振动控制方程),结合流固耦合条件求解了声振耦合系统控制方程,应用有限元模拟对理论预测进行了验证. 基于理论模型的数值计算结果,系统研究了蜂窝层芯夹层板结构的振动特性和传声特性,刻画了层芯厚度、蜂窝壁厚、夹层板面内尺寸和声压入射角度等关键系统参数对夹层板振动和传声特性的影响,为此类结构的工程优化设计提供了必要的理论参考.  相似文献   

12.
Dynamic buckling of stiffened plates under fluid-solid impact load   总被引:1,自引:0,他引:1  
A simple solution of the dynamic buckling of stiffened plates under fluid-solid impact loading is presented. Based on large deflection theory, a discretely stiffened plate model has been used. The tangential stresses of stiffeners and in-plane displacement are neglected. Applying the Hamilton‘ s principle, the motion equations of stiffened plates are obtained. The deflection of the plate is taken as Fourier series, and using Galerkin method, the discrete equations can be deduced, which can be solved easily by Runge-Kutta method. The dynamic buckling loads of the stiffened plates are obtained from Budiansky-Roth ( B-R ) curves.  相似文献   

13.
四边固定加劲板的非线性自由振动   总被引:1,自引:0,他引:1  
马牛静  王荣辉 《力学学报》2011,43(5):922-930
针对工程中常用的加劲板, 研究了非线性振动的求解方法与振动特性. 将加劲板分为板与加劲肋两个部分考虑, 其中板视为考虑几何非线性的大挠度板, 加劲肋视为Euler梁. 假定加劲板的位移, 利用Lagrange方程结合系统能量和振型叠加推导了加劲板的动力平衡方程. 运用椭圆函数及摄动法计算加劲板非线性振动的单模态解, 多模态解则通过增量迭代法进行求解. 最后, 结合有限元软件ANSYS对一个四边固定且不可移动的加劲板进行分析, 讨论解的收敛性, 并分析两个方向设置不同数量加劲肋的情况下非线性自振频率与振幅的关系, 得到了一些加劲板非线性振动特性.   相似文献   

14.
弹性体的正则方程和加筋板的固有频率分析   总被引:8,自引:0,他引:8  
卿光辉  邱家俊  塔娜 《力学学报》2004,36(6):749-756
应用弹性力学的Hamilton正则方程理论和其半解析法,为整体加筋板的固有频率分析提出了一种新颖的数学模型. 采用同一种平面元素离散板和加强筋,并分别建立板和加强筋的线性方程组. 考虑到板和加强筋连接界面上应力和位移的连续性,联立板和加强筋的方程得到全结构的方程组和求解固有频率的特征方程. 主要优越性表现为:结构的旋转惯性、剪切变形等都得到了考虑,且不限制结构的板厚度和加强筋的高度. 多个数值实例的收敛分析和结果证明了方法是可靠的. 该方法很容易被修改用来分析加筋壳、加筋压电材料层合板或带有压电材料传感器和驱动器块的板壳问题.  相似文献   

15.
《力学快报》2023,13(3):100437
As a kind of classical low-frequency sound-absorbing material, the microperforated plate (MPP) has been widely used. Here, we inspired by the sound absorption mechanism of the MPP, a spiral metasurface (SM) is designed and the analytical solution of acoustic impedance and sound absorption coefficient are obtained. The relationship between the sound absorption properties of the MPP and the SM with their own structures is systematically studied, and the analytical solutions are used to optimise the structure. It is concluded that the MPP and the SM of the same thickness achieve effective absorption in the frequency range between 390-900 Hz and 1920-4266 Hz, with a total thickness less than 1/6 of the wavelength. Meanwhile, the numerical calculation shows that the MPP and SM can match well with the background medium in the effective rang. Our study provides new insights into the design methods of sound-absorbing materials and is potentially suitable for many acoustic engineering applications.  相似文献   

16.
微机电系统(micro-electro-mechanical system,MEMS) 是指内部微结构尺寸在微米甚至纳米量级的微电子机械装置,是一个独立的智能系统. 长宽厚均处于微米量级的微平板为MEMS 中的典型结构,其声学和力学特性直接影响MEMS 的性能. 针对同时受声压激励和气膜力(通过考虑相同尺寸微平板振动引入) 作用的四边简支微平板结构,应用Cosserat 理论和Hamilton 原理,建立了考虑微尺度效应(本征长度和Knudsen 数)影响的声振耦合理论模型,并通过多重Fourier 展开法求解了耦合方程,得到了系统的传声损失结果. 通过频域分析,考虑微平板的不同振动频率、振动幅度和板间距,系统研究了不同尺度效应下微结构中气体薄膜所产生的阻尼力对微平板结构传声特性的影响. 研究发现尺度效应对于微结构的声振特性影响巨大,振动行为对微结构的传声特性也有很大影响,控制并减小微平板的振动幅度以及增大微平板的间距都能够提高微平板的声振性能. 研究结果为MEMS 中微平板的稳定性优化设计提供了理论参考.   相似文献   

17.
A new analytical–numerical approach to investigation of the response of multilayerplates to impulse loading is described in this paper. The plates behaviour is described by theequations of the three-dimensional elasticity theory. According to the approach being proposed,the sought for functions included in the system of equations and the boundary and initialconditions are presented as Fourier series expansions in the tangential directions. The derivativesof these functions in the transverse direction are replaced by their finite-difference presentations.As a result of such transforms, the problem of vibration of a multilayer plate is reduced tointegration of a system of ordinary differential equations with constant coefficients. Integration isperformed by expansion into the Taylors series. The possibilities of the approach proposed andthe validity of results obtained is illustrated by several examples of calculating vibration processesand the processes of propagation of elastic waves. A comparison of the results obtained on thebasis of other approaches has been performed.  相似文献   

18.
加筋板弹性大挠度的冲击响应分析   总被引:4,自引:0,他引:4  
用半解析的方法分析了横向冲击载荷下加筋板的非线性瞬态响应。考虑膜力的存在 ,忽略筋截面上的剪切应力 ,引入板的应力函数 ,采用离散加筋板模型 ,运用能量原理建立加筋板的动响应控制方程。假设挠度为双级数形式 ,运用迦辽金法 ,将加筋板的动响应方程转化为一个多自由度的动力系统 ,采用数值方法来求解。最后给出了几个模型的计算结果。  相似文献   

19.
受面内冲击载荷下加筋板的非线性动态屈曲   总被引:5,自引:1,他引:5  
分析了受面内冲击载荷下加筋板的非线性弹性动态屈曲.考虑板与筋的膜力,忽略面内位移,运用Hamilton变分原理,得出非线性控制方程,采用双级数形式的挠度假设,由Galerkin方法得到离散方程组,根据B-R准则,判断加筋板的动态屈曲.  相似文献   

20.
Theoretical analysis of the nonlinear vibration effects on the sound absorption of a panel absorber and sound transmission loss of a panel backed by a rectangular cavity is herein presented. The harmonic balance method is employed to derive a structural acoustic formulation from two-coupled partial differential equations representing the nonlinear structural forced vibration and induced acoustic pressure; one is the well-known von Karman??s plate equation and the other is the homogeneous wave equation. This method has been used in a previous study of nonlinear structural vibration, in which its results agreed well with the elliptic solution. To date, very few classical solutions for this nonlinear structural-acoustic problem have been developed, although there are many for nonlinear plate or linear structural-acoustic problems. Thus, for verification purposes, an approach based on the numerical integration method is also developed to solve the nonlinear structural-acoustic problem. The solutions obtained with the two methods agree well with each other. In the parametric study, the panel displacement amplitude converges with increases in the number of harmonic terms and acoustic and structural modes. The effects of excitation level, cavity depth, boundary condition, and damping factor are also examined. The main findings include the following: (1)?the well-known ??jump phenomenon?? in nonlinear vibration is seen in the sound absorption and transmission loss curves; (2)?the absorption peak and transmission loss dip due to the nonlinear resonance are significantly wider than those in the linear case because of the wider resonant bandwidth; and (3)?nonlinear vibration has the positive effect of widening the absorption bandwidth, but it also degrades the transmission loss at the resonant frequency.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号