Equilibrium adsorption of a cyclopentane—benzene vapor mixture on active carbon

The data on adsorption of cyclopentane, benzene, and their mixture on active carbon were analyzed by the statistical thermodynamic model. A method to describe the state of a binary mixture in single micropores was offered. A substantial negative deviation from Raoult's law predicted by the concept of an ideal adsorption solution is a consequence of a decrease in the excessive Helmholtz energy brought about by progressive filling when values of the excessive energy are positive over a wide range of adsorption. The excessive values found for the entropy and internal energy of a mixture of molecules in a single micropore are negative due to the heterogeneity of the adsorption field. The approach suggested adequately describes the experimental data and can be used for the determination of differential heats of adsorption. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1070–1076, June, 1999.     

Equilibrium adsorption of binary mixtures of gases by zeolites and the state of the adsorption phase

A method for analyzing the state of the adsorption phase was developed on the basis of statistical thermodynamics for the case of equilibrium adsorption of binary gaseous mixtures. The procedure for treating experimental data to determine the Helmholtz energy and other thermodynamic functions of a mixture of molecules occluded within zeolite cavities was proposed. A measure of ideal behavior of a mixture of a small number of molecules in the micropore was formulated; in the asymptotic limit such a behavior leads to the Raoult law and to assumption of the validity of the Raoult law when moving along the line of constant value of the Gibbs integral in the ideal adsorption solution theory. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1927–1932, October, 1998.     

Adsorption Characteristics in Zeolite Nano-Pore Evaluated by use of Nitrogen Monoxide as a Probe Adsorbate

Adsorption isotherms of nitrogen monoxide (NO) and in situ EPR spectra of adsorbed NO on mordenite zeolites (MOR) of different cation types (HM, NaM and CaM) are measured at different temperatures to elucidate the effect of the strong adsorption promoted by the enhancement of potential field in micropore of MOR (micropore filling) as well as the electrostatic interaction in MOR on NO adsorption. The NO molecules adsorb irreversibly and fill up the micropore of MOR at 201 K, above the critical temperature of NO, regardless of the kind of cation species. The NO adsorption takes place even at 273 K. In the adsorption at 273 K, the strength of electrostatic field formed by cation sites affects the adsorptivity and the order of saturation amount of adsorption (V _s) corresponds to that of the electrostatic field strength. EPR results show that NO molecules strongly interact with cation sites in MOR and disproponation reaction of NO take place on CaM.     

Estimation of micropore size distribution in active carbons from adsorption isotherms of water vapor

A possibility of estimation of the micropore size distribution in the carbon adsorbents with the developed micro-and mesoporous structure by analysis of the adsorption isotherms of water vapors was considered. At saturation water condenses in micropores in a form of a weakly compressed liquid. However, water molecules in micropores are packed not so closely as in the liquid because of steric hindrance. Therefore, the real density of water adsorbed in the micropores is lower than that of water adsorbed on an open surface and lower than the density of the normal liquid. An analysis of the adsorption isotherms of water vapors with account for the both opposite effects on the water density gives reliable data on the micropore sizes of the carbon adsorbents. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 40–43, January, 2007.     

Carbon dioxide adsorption on the microporous ACC carbon adsorbent

Adsorption isotherms of carbon dioxide on the microporous ACC carbon adsorbent and the adsorption deformation of the adsorbent were measured. The heats of adsorption at temperatures raising from 243 to 393 K and pressures from 1 to 5⋅10⁶ Pa were measured. In the low-temperature region (243 K), an increase in the amount adsorbed is accompanied by adsorbent contraction, and at high micropore fillings (a > 10 mmol g⁻¹) the ACC carbon adsorbent expands. At high temperatures, adsorbent expansion is observed in the whole region of micropore filling. At 243 K in the low filling region (a < 1 mmol g⁻¹), the heat of adsorption decreases smoothly from 27 to 24 kJ mol⁻¹. The heat of adsorption remains virtually unchanged in the interval 2 mmol g⁻¹ < a < 11 mmol g⁻¹ and then decreases to 8 kJ mol⁻¹ at a = 12 mmol g⁻¹. Taking into account the nonideal character of the gas phase and adsorbent deformation the heats of adsorption are strongly temperature-dependent in a region of high pressures. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1331–1335, June, 2005.     

Adsorption of benzene and perfluorobenzene vapor from a flow of moist air by a layer of equilibrium moistened active carbon

The equilibrium adsorption of benzene and perfluorobenzene vapor from a flow of moist air by a layer of active carbon (AC) hydrated to equilibrium were considered. It was ascertained that these organic substances partly displace the water from the adsorptive micropore volume of AC. The equilibrium adsorption values of benzene, perfluorobenzene, and water vapors on AC were calculated. The adsorption of benzene and perfluorobenzene from a flow of moist air by a layer of AC is characterized by volume filling of the micropore adsorption space. This work is part of the research devoted to the study of the dynamics of the adsorption of organic substances from a flow of moist air by a layer of AC hydrated to equilibrium.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1398–1401, August, 1994.     

Thermodynamics of CO<Subscript>2</Subscript> adsorption on zeolite NaX in wide intervals of pressures and temperatures

The dependences of the differential molar isosteric heat of adsorption and entropy of adsorption of CO₂ on zeolite NaX were determined in wide temperature (196–423 K) and pressure (0.1 Pa to 5.4 MPa) intervals. In the initial region of adsorption (a < 1 mmol g^–1), the differential molar heat of adsorption increases from 40 to 43 kJ mol^–1 and then decreases to 33 kJ mol^–1. The heat of adsorption remains virtually unchanged at 3 mmol g^–1< a < 6.5 mmol g^–1 and decreases sharply at high fillings of zeolite micropores (a > 7 mmol g^–1). The heat of adsorption was found to be temperature-dependent. The region with the constant heats shrinks with the temperature increase, and the heats begin to decrease at lower fillings of micro pores. The dependences of the change in the differential entropy of the adsorption system on the amount adsorbed were calculated at different temperatures. The specific features of the behavior of the thermodynamic functions of this adsorption system in the initial and medium region of fillings kre associated with interactions of adsorbate molecules with Na⁺ cations and walls of large cavities. For high fillings, an increase in repulsion forces between adsorbed molecules results in a sharp expansion of the adsorbent and a decrease in the heat of adsorption.Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1570–1573, August, 2004.     

Adsorption deformation in the microporous carbon adsorbent-benzene system and porous structure of adsorbents

The relative adsorption deformation of several microporous carbon adsorbents was studied as a function of the benzene adsorption at relative pressure ranging from 1·10⁻¹ to 1.0 and at 293 K. A correlation between the maximum compression of the sample and the characteristic energy of benzene adsorption of the Dubinin-Radushkevich equation was obtained. Using data on the adsorption deformation, it is possible to identify the region with a specific pore size that cannot be evaluated with the help of the Dubinin-Radushkevich equation. Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No.6, pp. 1018–1022, June, 2000.     

Micropore filling of NO,SO2, NH3, and CO2 onα-FeOOH dispersed activated carbon fibers

Adsorption isotherms of NO, SO₂, NH₃, and CO₂ on-FeOOH dispersed activated carbon fibers at 303 K were examined to determine the role of surface modification in micropore filling. The parameters on micropore structures were obtained from both nitrogen adsorption at 77 K and benzene adsorption at 303 K; both isotherms were of BDDTI type and gave the same micropore volume. The preoxidation conditions of ACF, prior to the deposition of-FeOOH against the NO adsorptivity were examined. The dispersion of-FeOOH on ACF was effective in enhancement of micropore filling, irrespective of the adsorbate molecule. We determined the degree of volume filling for each gas by the use of a DR plot. The modified DR plot for an NO gas, of which the critical temperature was much lower than 303 K, was proposed. The degree of volume filling for various gases was correlated with the deviation of each boiling point from 303 K and with the van der Waalsa constant.     

The Effects of Hydrophobicity and Textural Properties on Hexamethyldisiloxane Adsorption in Reduced Graphene Oxide Aerogels

To expand the applications of graphene-based materials to biogas purification, a series of reduced graphene oxide aerogels (rGOAs) were prepared from industrial grade graphene oxide using a simple hydrothermal method. The influences of the hydrothermal preparation temperature on the textural properties, hydrophobicity and physisorption behavior of the rGOAs were investigated using a range of physical and spectroscopic techniques. The results showed that the rGOAs had a macro-porous three-dimensional network structure. Raising the hydrothermal treatment temperature reduced the number of oxygen-containing groups, whereas the specific surface area (S_BET), micropore volume (V_micro) and water contact angle values of the rGOAs all increased. The dynamic adsorption properties of the rGOAs towards hexamethyldisiloxane (L2) increased with increasing hydrothermal treatment temperature and the breakthrough adsorption capacity showed a significant linear association with S_BET, V_micro and contact angle. There was a significant negative association between the breakthrough time and inlet concentration of L2, and the relationship could be reliably predicted with a simple empirical formula. L2 adsorption also increased with decreasing bed temperature. Saturated rGOAs were readily regenerated by a brief heat-treatment at 100 °C. This study has demonstrated the potential of novel rGOA for applications using adsorbents to remove siloxanes from biogas.     

Role played by the head size of some non‐ionic surfactants on their adsorption onto montmorillonite clay

Sorption behavior of polyoxethylene(n)monooleate series [Ol(EO)_n] onto montmorillonite clay was studied at 25°C to investigate the influence of the surfactant's head size on the sorption process. All the tested surfactants exhibited L‐shaped isotherms that means a strong interaction between the adsorbent and the adsorbate. Also, all the obtained isotherms ended with a drastic increase in the isotherm slope at nearly constant equilibrium concentration. This abrupt increase reflected the fairly high affinity of the tested surfactants to the clay surface at high bulk concentration region. The maximum amount adsorbed at the plateau region, Γ_max, was calculated according to the Langmuir adsorption theory and followed the order: Ol(EO)₁₄ > Ol(EO)₂₀ < Ol(EO)₄₀ < Ol(EO)₈₀. In case of short ethylene oxide (EO) chain, Γ_max decreased with the increase in the chain length; but a reverse result was obtained in case of surfactants with longer EO chain length (20 to 80 units). The free energy of adsorption, ΔG°_ad, had negative values indicating the spontaneous adsorption of surfactant molecules onto clay. The values of ΔG°_ad increased with increasing EO units from 14 to 20 units and decreased with further elongation in the EO chain from 20 to 80 units. Copyright © 2004 John Wiley & Sons, Ltd.     

Correlation between crystal texture and microporous structure of carbon adsorbents

A correlation of adsorption and X-ray data for a series of both initial and modified active carbons (AC) was performed. The AC were modified by thermal treatment and progressive activation. A linear correlation between the sizes of crystallites and micropore widths of AC was established. It was shown that the adsorption of water vapor results in an increase in the parameterL _aof crystallites of active carbons.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2159–2162, November, 1995.The work was financially supported by the Russian Foundation for Basic Research (Project No. 94-03-09550).     

Adsorption of Water on an MgSO4(100) Surface: A First‐Principles Investigation

The adsorption properties of water molecules on an MgSO₄(100) surface were investigated by using density functional theory (DFT) and supercell models. Optimized stable geometries of one and more than one water molecules adsorbed on an ideal MgSO₄(100) surface were obtained. The configurations with water molecules adsorbed on atoms of the second and third atomic layers of the MgSO₄(100) surface are quite stable. After adsorption, the separations between both the adjacent Mg atoms (R_{Mg? Mg}) and the adjacent O atoms of the surface (R_{O? O}) increase, which indicates that the MgSO₄(100) surface starts to deliquesce. In addition, water molecules are more likely to adsorb onto a defective surface rather than an ideal surface. Mulliken population analysis suggests that fewer charges transfer to the water molecule from the Mg atom of a defective substrate. Finally, Raman spectra were calculated for 0.5, 1, and 2 ML (ML=monolayer) water adsorbed on an MgSO₄(100) surface, which is helpful for further related experiments.     

Adsorption on nonporous and supermicroporous adsorbents

The mean values of the characteristic energy of C₆H₆ adsorption in large micropores were calculated from the adsorption isotherms of benzene vapor on carbon blacks. The supermicropores are characterized by the significant dispersion of the adsorption potential resulted from the pore-size distribution, which imparts the polymolecular character to adsorption. The effect of enhancement of the characteristic energy of adsorption was analyzed, which was caused by the overlap of the force fields of the opposite pore walls and the reduction of the adsorption film surface with micropore volume filling. The both factors are comparable by magnitude and depend on the micropore sizes.     

Physicochemical Properties and Surface Tension Prediction of Mixed Surfactant Systems: Triton X‐100 with Dodecylpyridinium Bromide and Triton X‐100 with Sodium Dodecylsulfonate

Dependences of the surface tension of aqueous solutions of ionic (dodecylpyridinium bromide, sodium dodecylsulfonate) and nonionic (Triton X‐100) surfactants and their mixtures on total surfactant concentration and solution composition were studied, and the surface tension of the mixed systems were predicted using different Miller's model. It was found that how to select the model for calculation of ω is corresponding to the degree of the deviation from the ideality during the adsorption of mixed surfactants. The compositions of micelles and adsorption layers at air‐solution interface as well as parameters (β^m, β^ads) of headgroup‐headgroup interaction between the molecules of ionic and nonionic surfactants were calculated based on Rubingh model. The parameters (B₁) of chain‐chain interaction between the molecules of ionic and nonionic surfactants were calculated based on Maeda model. The free energy of micellization calculated from the phase separation model (ΔG ₂ ^m ), and by Maeda's method (ΔG ₁ ^m ) agree reasonably well at high content of nonionic surfactant. The excess free energy ΔG _ads ^E and ΔG _m ^E (except α=0.4) for TX‐100/SDSn system are more negative than that TX‐100/DDPB system. These can be probably explained with the EO groups of TX‐100 surfactant carrying partial positive charge.     

The volume of micropores and the Dubinin—Radushkevich equation

The substantiation and the area of applicability of the Dubinin—Radushkevich equation for determination of the micropore volume in microporous systems from experimental data on adsorption isotherms were examined. It was shown that the micropore volumes found using the standard procedure are overestimated. A more accurate method for determining the mircopore volumes based on the pressure of filling of micropores was proposed. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 659–664, April, 1998.     

Nitrogen adsorption on fluorinated activated carbon fiber

Nitrogen adsorption isotherms for fluorinated activated carbon fiber (F-ACF) and fluorinated carbon black (F-CB) were measured at 77 K. Surface structures of F-ACF and F-CB were examined by _s -plot analysis using the adsorption data on the nonporous carbon black (CB) and F-CB. The surface energy of F-ACF was lower than that of ACF. The micropore structure of ACF was preserved even after fluorination, although the limiting adsorption amount and the micropore width decreased with fluorination.     

Adsorption and inhibition properties of Tephrosia Purpurea as corrosion inhibitor for mild steel in sulphuric acid solution

Abstract

The present study investigated the adsorption and inhibition behavior of leaf extract of Tephrosia Purpurea (T. purpurea) on mild steel corrosion in 1?N H₂SO₄ solution using electrochemical and surface morphological methods. Techniques adopted for electrochemical studies were Potentiodynamic Polarization and Electrochemical Impedance Spectroscopy (EIS) technique; and surface morphological studies were carried out using Scanning Electron Microscopy (SEM), and Atomic Force Microscopy (AFM). The leaf extract of T. purpurea was characterized using UV-Visible spectroscopy (UV-Vis), Fourier-Transform Infrared Spectroscopy (FT-IR), Nuclear Magnetic Resonance Spectroscopy (NMR) and Gas Chromatography – Mass Spectrometry (GCMS). The results obtained from electrochemical studies exhibited the potential of T. purpurea as good corrosion inhibitor. And, it was found that, the inhibition efficiency (I.E in %) increases with increase in concentration of the inhibitor molecules, the optimum inhibitor concentration observed was 300?ppm and the inhibition efficiency of 93% was observed at this inhibitor concentration. Above 300?ppm, there was not much changes in inhibition efficiency. Polarization studies provided the information that the inhibition is of mixed type and EIS confirmed that the corrosion process is controlled by single charge transfer mechanism. And, it was obtained that, the adsorption of inhibitor molecules obeys Langmuir adsorption isotherm. The inhibition is mainly by the adsorption of inhibitor molecules on the mild steel electrode surface, which was confirmed by FT-IR, SEM and AFM studies. Through all the experimental results, it can be arrived that, the leaf extract of T. purpurea performed as a good corrosion inhibitor for mild steel in 1?N sulfuric acid medium.     

Relation between characteristic adsorption energy and internal pressure in the theory of volume filling of micropores

An equation for the internal pressure acting on an adsorbate in micropores was obtained on the basis of the assumption that the chemical potential of an adsorbate in micropores is equal to that in an equilibrium gas phase and using the Dubinin-Radushkevich equation. The empirical relation between the characteristic adsorption energy and the half width of pores was expressed in terms of internal pressure and diameter of adsorbate molecules. The two-dimensional pressure was calculated for micropores with plane-parallel walls, where the width of a micropore coincides with the diameter of an adsorbate molecule. The results obtained were compared with the two-dimensional pressure of a monolayer on a free planar surface for an adsorbate and adsorbent of the same nature.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1928–1930, October, 1995.     

Adsorption of Large Organic Molecules on Clean and Hydroxylated Rutile TiO2(110) Surfaces

Behavior of large organic molecules equipped with spacer groups (Violet Landers, VL) on the TiO₂(110)‐(1×1) surfaces is investigated by means of high‐resolution scanning tunneling microscopy (STM). Two distinct adsorption geometries are observed. We demonstrate that the molecule adsorption morphology can be alternated by well‐controlled STM tip‐induced manipulation. It is used to probe the mobility of molecules and reveals locking in one of the analyzed adsorption sites, thus allow to enhance or reduce the mobility along the [001] direction. Field induced hydrogen desorption is used to perform lateral STM manipulation on a hydroxyl‐free surface, which provides insight into the influence of surface hydroxyl groups on the molecule behavior. The ability to image with submolecular resolution both the central board and the spacer groups of the VL molecule is demonstrated.