Uniqueness and the maximum principle for quasilinear elliptic equations with quadratic growth conditions

In this paper, we show that the maximum principle holds for quasilinear elliptic equations with quadratic growth under general structure conditions.Two typical particular cases of our results are the following. On one hand, we prove that the equation (1) {ie77-01} where {ie77-02} and {ie77-03} satisfies the maximum principle for solutions in H ¹()L(), i.e., that two solutions u ₁, u ₂H¹() L() of (1) such that u ₁u₂ on , satisfy u ₁u₂ in . This implies in particular the uniqueness of the solution of (1) in H ₀ ¹ ()L().On the other hand, we prove that the equation (2) {ie77-04} where fH^–1() and g(u)>0, g(0)=0, satisfies the maximum principle for solutions uH¹() such that g(u)¦Du|{²L¹(). Again this implies the uniqueness of the solution of (2) in the class uH ₀ ¹ () with g(u)¦Du|{²L¹().In both cases, the method of proof consists in making a certain change of function u=(v) in equation (1) or (2), and in proving that the transformed equation, which is of the form (3) {ie77-05}satisfies a certain structure condition, which using ((v₁ -v ₂)⁺)ⁿ for some n>0 as a test function, allows us to prove the maximum principle.     

Transport in ordered and disordered porous media I: The cellular average and the use of weighting functions

In this work we consider transport in ordered and disordered porous media using singlephase flow in rigid porous mediaas an example. We defineorder anddisorder in terms of geometrical integrals that arise naturally in the method of volume averaging, and we show that dependent variables for ordered media must generally be defined in terms of thecellular average. The cellular average can be constructed by means of a weighting function, thus transport processes in both ordered and disordered media can be treated with a single theory based on weighted averages. Part I provides some basic ideas associated with ordered and disordered media, weighted averages, and the theory of distributions. In Part II a generalized averaging procedure is presented and in Part III the closure problem is developed and the theory is compared with experiment. Parts IV and V provide some geometrical results for computer generated porous media.Roman Letters A interfacial area of the- interface contained within the macroscopic region, m² - A_e area of entrances and exits for the-phase contained within the macroscopic system, m² - g gravity vector, m/s² - I unit tensor - K traditional Darcy's law permeability tensor, m² - L general characteristic length for volume averaged quantities, m - characteristic length (pore scale) for the-phase - (y) weighting function - m(–y) (y), convolution product weighting function - _v special weighting function associated with the traditional averaging volume - N unit normal vector pointing from the-phase toward the-phase - p pressure in the-phase, N/m² - p0 reference pressure in the-phase, N/m² - p traditional intrinsic volume averaged pressure, N/m² - r0 radius of a spherical averaging volume, m - r position vector, m - r position vector locating points in the-phase, m - averaging volume, m³ - V volume of the-phase contained in the averaging volume, m³ - V _cell volume of a unit cell, m³ - v velocity vector in the-phase, m/s - v traditional superficial volume averaged velocity, m/s - x position vector locating the centroid of the averaging volume or the convolution product weighting function, m - y position vector relative to the centroid, m - y position vector locating points in the-phase relative to the centroid, m Greek Letters indicator function for the-phase - Dirac distribution associated with the- interface - V/V, volume average porosity - mass density of the-phase, kg/m³ - viscosity of the-phase, Ns/m²     

The contribution of internal degrees of freedom to the non-Newtonian rheology of model polymer fluids

We report non-equilibrium molecular dynamics simulations of rigid and non-rigid dumbbell fluids to determine the contribution of internal degrees of freedom to strain-rate-dependent shear viscosity. The model adopted for non-rigid molecules is a modification of the finitely extensible nonlinear elastic (FENE) dumbbell commonly used in kinetic theories of polymer solutions. We consider model polymer melts — that is, fluids composed of rigid dumbbells and of FENE dumbbells. We report the steady-state stress tensor and the transient stress response to an applied Couerte strain field for several strain rates. We find that the rheological properties of the rigid and FENE dumbbells are qualitatively and quantitatively similar. (The only exception to this is the zero strain rate shear viscosity.) Except at high strain rates, the average conformation of the FENE dumbbells in a Couette strain field is found to be very similar to that of FENE dumbbells in the absence of strain. The theological properties of the two dumbbell fluids are compared to those of a corresponding fluid of spheres which is shown to be the most non-Newtonian of the three fluids considered.Symbol Definition b dimensionless time constant relating vibration to other forms of motion - F force on center of mass of dumbbell - F _i force on bead i of dumbbell - F force between center of masses of dumbbells and - F _ij force between beads i and j - h vector connecting bead to center of mass of dumbbell - H dimensionless spring constant for dumbbells, in units of / ² - I moment of inertia of dumbbell - J general current induced by applied field - k _B Boltzmann's constant - L angular momentum - m mass of bead, (= m/2) - M mass of dumbbell, g - N number of dumbbells in simulation cell - P translational momentum of center of mass of dumbbell - P pressure tensor - P _xy xy component of pressure tensor - Q separation of beads in dumbbell - Q _eq equilibrium extension of FENE dumbbell and fixed extension of rigid dumbbell - Q ₀ maximum extension of dumbbell - r _ij vector connecting beads i and j - r position vector of center of mass dumbbell - R vector connecting centers of mass of two dumbbells - t time - t ^* dimensionless time, in units of m/ - T ^* dimensionless temperature, in units of /k - u potential energy - u velocity vector of flow field - u _x x component of velocity vector - V volume of simulation cell - X general applied field - strain rate, s^–1 - ^* dimensionless shear rate, in units of /m ² - general transport property - Lennard-Jones potential well depth - friction factor for Gaussian thermostat - shear viscosity, g/cms - ^* dimensionless shear viscosity, in units of m/ ² - ^* dimensionless number density, in units of ^–3 - Lennard-Jones separation of minimum energy - relaxation time of a fluid - angular velocity of dumbbell - orientation angle of dumbbell      

Flow visualization of compressible vortex structures using density gradient techniques

Mathematical results are derived for the schlieren and shadowgraph contrast variation due to the refraction of light rays passing through two-dimensional compressible vortices with viscous cores. Both standard and small-disturbance solutions are obtained. It is shown that schlieren and shadowgraph produce substantially different contrast profiles. Further, the shadowgraph contrast variation is shown to be very sensitive to the vortex velocity profile and is also dependent on the location of the peak peripheral velocity (viscous core radius). The computed results are compared to actual contrast measurements made for rotor tip vortices using the shadowgraph flow visualization technique. The work helps to clarify the relationships between the observed contrast and the structure of vortical structures in density gradient based flow visualization experiments.Nomenclature a Unobstructed height of schlieren light source in cutoff plane, m - c Blade chord, m - f Focal length of schlieren focusing mirror, m - C _T Rotor thrust coefficient, T/( ² R ⁴) - I Image screen illumination, Lm/m ² - l Distance from vortex to shadowgraph screen, m - n _b Number of blades - p Pressure,N/m ² - p Ambient pressure, N/m ² - r, , z Cylindrical coordinate system - r _c Vortex core radius, m - Non-dimensional radial coordinate, (r/r _c ) - R Rotor radius, m - Tangential velocity, m/s - Specific heat ratio of air - Circulation (strength of vortex), m ²/s - Non-dimensional quantity, ² 8²p r _c ² - Refractive index of fluid medium - ₀ Refractive index of fluid medium at reference conditions - Gladstone-Dale constant, m ³/kg - Density, kg/m ³ - Density at ambient conditions, kg/m ³ - Non-dimensional density, (/ ) - Rotor solidity, (n _b c/ R) - Rotor rotational frequency, rad/s     

Effect of measuring volume length on two-component laser velocimeter measurements in a turbulent boundary layer

The effects of finite measuring volume length on laser velocimetry measurements of turbulent boundary layers were studied. Four different effective measuring volume lengths, ranging in spanwise extent from 7 to 44 viscous units, were used in a low Reynolds number (Re=1440) turbulent boundary layer with high data density. Reynolds shear stress profiles in the near-wall region show that u v strongly depends on the measuring volume length; at a given y-position, u v decreases with increasing measuring volume length. This dependence was attributed to simultaneous validations on the U and V channels of Doppler bursts coming from different particles within the measuring volume. Moments of the streamwise velocity showed a slight dependence on measuring volume length, indicating that spatial averaging effects well known for hot-films and hot-wires can occur in laser velocimetry measurements when the data density is high.List of symbols time-averaged quantity - u wall friction velocity, ( _w /)^1/2 - v kinematic viscosity - d _p pinhole diameter - l _eff spanwise extent of LDV measuring volume viewed by photomultiplier - l ⁺ non-dimensional length of measuring volume, l _eff u /v - y ⁺ non-dimensional coordinate in spanwise direction, y u /v - z ⁺ non-dimensional coordinate in spanwise direction, z u /v - U ⁺ non-dimensional mean velocity, /u - u instantaneous streamwise velocity fluctuation, U &#x2329;U - v instantaneous normal velocity fluctuation, V–V - u RMS streamwise velocity fluctuation, u ^21/2 - v RMS normal velocity fluctuation, v ^21/2 - Re Reynolds number based on momentum thickness, U 0/v - R _uv cross-correlation coefficient, u v/u v - R₁₂(0, 0, z) two point correlation between u and v with z-separation, <u(0, 0, 0) v (0, 0, z)>/<u(0, 0, 0) v (0, 0, 0)> - N rate at which bursts are validated by counter processor - T Taylor time microscale, u (dv/dt²)^–1/2     

Critical phenomena and waves in gas-liquid systems

The results of the hydraulic studies of gas-liquid media, wave processes in two-phase media and critical phenomena are described. Some methodological foundations to describe these media and methods to obtain the basic similarity criteria for the hydraulics and gas-dynamics of bubble suspensions are discussed. A detailed consideration is given for the phase transition processes on interfaces and the interface stability. A relation has been revealed between the wave and critical phenomena in two-phase systems.Nomenclature a thermal diffusivity - Ar Archimedes number - B gas constant - C heat capacity - C _p heat capacity at constant pressure - C _v heat capacity at constant volume - c ₀ acoustic velocity in the mixture - c _l acoustic velocity in the liquid - C _f flow resistance coefficient - G mass rate of flow - g gravitational acceleration - L latent heat of evaporation - l initial perturbation width - M Mach number - Nu Nusselt number - P pressure - Pr Prandtl number - R bubble radius - (3P ₀/R ₀ ² _f )^–1 bubble resonance frequency square - T temperature - U medium motion velocity - W heavy phase velocity - W light phase velocity - We Weber number - heat release coefficient - dispersion coefficient - void fraction - adiabatic index - film thickness - dimensionless film thickness - kinematic viscosity coefficient - dynamical viscosity coefficient - dissipation coefficient in the mixture - dispersion parameter - _f liquid phase density - light phase density - heat conductivity - surface tension - frequency, ₀ ² =3P ₀/ _f R ₀ ²     

Deformation to breaking of deep water gravity waves

The results of laboratory observations of the deformation of deep water gravity waves leading to wave breaking are reported. The specially developed visualization technique which was used is described. A preliminary analysis of the results has led to similar conclusions than recently developed theories. As a main fact, the observed wave breaking appears as the result of, first, a modulational instability which causes the local wave steepness to approach a maximum and, second, a rapidly growing instability leading directly to the breaking.List of symbols L total wave length - H total wave height - crest elevation above still water level - trough depression below still water level - wave steepness =H/L - crest steepness =/L - trough steepness =/L - F ₁ forward horizontal length from zero-upcross point (A) to wave crest - F ₂ backward horizontal length from wave crest to zero-downcross point (B) - crest front steepness =/F ₁ - crest rear steepness =/F ₂ - vertical asymmetry factor=F ₂/F ₁ (describing the wave asymmetry with respect to a vertical axis through the wave crest) - µ horizontal asymmetry factor=/H (describing the wave asymmetry with respect to a horizontal axis: SWL) - T ₀ wavemaker period - L ₀ theoretical wave length of a small amplitude sinusoïdal wave generated at T _inf0 ^sup–1 frequency - ₀ average wave height     

An analytical solution for the velocity and shear rate distribution of non-ideal Bingham fluids in concentric cylinder viscometers

An analytical solution is presented for the calculation of the flow field in a concentric cylinder viscometer of non-ideal Bingham-fluids, described by the Worrall-Tuliani rheological model. The obtained shear rate distribution is a function of the a priori unknown rheological parameters. It is shown that by applying an iterative procedure experimental data can be processed in order to obtain the proper shear rate correction and the four rheological parameters of the Worrall-Tuliani model as well as the yield surface radius. A comparison with Krieger's correction method is made. Rheometrical data for dense cohesive sediment suspensions have been reviewed in the light of this new method. For these suspensions velocity profiles over the gap are computed and the shear layer thicknesses were found to be comparable to visual observations. It can be concluded that at low rotation speeds the actually sheared layer is too narrow to fullfill the gap width requirement for granular suspensions and slip appears to be unavoidable, even when the material is sheared within itself. The only way to obtain meaningfull measurements in a concentric cylinder viscometer at low shear rates seems to be by increasing the radii of the viscometer. Some dimensioning criteria are presented.Notation A, B Integration constants - C Dimensionless rotation speed = µ/_y - c = 2µ - d = ₀ ²–2c_y - f() = (–₀)²+2c(–_y) - r Radius - r _b Bob radius - r _c Cup radius - r _y Yield radius - r ₀ Stationary surface radius - r Rotating Stationary radius - Y ₀ Shear rate parameter = /µ Greek letters Shear rate - = (r _y /r _b )²– 1 - µ Bingham viscosity - µ₀ Initial differential viscosity - µ µ₀-µ - Rotation speed - Angular velocity - Shear stress - _b Bob shear stress - _B Bingham stress - _y (True) yield stress - ₀ Stress parameter = _B +µ Y ₀ - _B - _y      

Free convection from a vertical plate with concentrated and distributed thermal sources

An analysis is developed for the laminar free convection from a vertical plate with uniformly distributed wall heat flux and a concentrated line thermal source embedded at the leading edge. We introduce a parameter=(1 +Q _L/Q_w)^–1=(1 + Ra_L/Ra_w)^–1 to describe the relative strength of the two thermal sources; and propose a unified buoyancy parameter=( Ra_L+ Ra_w)^1/5 with=1/(1 +Pr ^–1) to properly scale the dependent and independent variables. The variables are so defined that the resulting nonsimilar boundary-layer equations can describe exactly the buoyancy-induced flow from the dual sources with any relative strength to fluids of any Prandtl number from very small values to infinity. These nonsimilar equations are readily reducible to the self-similar equations of an adiabatic wall plume for=0, and to those of free convection from uniform flux plate for=1. Rigorous finite-difference solutions for fluids of Pr from 0.001 to are obtained over the entire range of from 0 to 1. The effects of both relative source strength and Prandtl number on the velocity profiles, temperature profiles, and the variations of wall temperature, are clearly illustrated.

---

Freie Konvektion an einer vertikalen Platte mit einer konzentrierten und einer gleichmäßig verteilten Wärmequelle

Zusammenfassung Für die freie Konvektion an einer vertikalen Platte mit einer gleichmäßig verteilten Wandwärmestromdichte und einer in der Vorderkante eingebetteten linienförmigen Wärmequelle wird eine Berechnungsmethode entwickelt. Zur Beschreibung der relativen Stärke der beiden Wärmequellen führen wir einen Parameter=(1 + Q_L/Q_w)^–1=(1 + Ra_L/Ra_w)^–1 ein und schlagen einen vereinheitlichten Auftriebsparameter=( Ra _L+ Ra _w)^1/5 mit=1/(1 +Pr ^–1 für die Skalierung der abhängigen und unabhängigen Variablen vor. Die Variablen werden so definiert, daß mit den sich ergebenden unabhängigen Grenzschichtgleichungen die von den beiden Wärmequellen beliebiger Stärke verursachte Auftriebsströmung von Fluiden beliebiger Prandtl-Zahl genau beschrieben werden kann. Diese unabhängigen Gleichungen können ohne weiteres auf die selbstähnlichen Gleichungen für den Fall einer lokalen Wärmezufuhr an einer sonst adiabatischen Wand für=0 und jenen der freien konvektion an einer Platte mit einheitlichem Wärmestrom für=1 zurückgeführt werden. Für Fluide mit der Prandtl-Zahl zwischen 0,001 und Unendlich werden nach der strengen finite Differenzen-Methode Lösungen im Bereich von zwischen 0 und 1 erhalten. Der jeweilige Einfluß der relativen Quellenstärke und der Prandtl-Zahl auf die Geschwindigkeits- und Temperaturprofile sowie die Veränderung der Wandtemperatur werden deutlich dargestellt.

---

Nomenclature C _f friction coefficient - C _p specific heat - f reduced stream function - g gravitational acceleration - k thermal conductivity - L width of the plate - Nu local Nusselt number - Pr Prandtl number - q _w wall heat flux - Q _L heat generated by the line source - Q _w heat released by the uniform-flux wall from 0 tox, q _w Lx - Ra _L local Rayleigh number, g T _L ^* x ³/( ) - Ra _w local Rayleigh number,g T _w ^* w ³/( ) - T fluid temperature - T temperature of ambient fluid - T _L ^* characteristic temperature of the line source,Q _{L/(C p} L) - T _w ^* characteristic temperature of the uniform flux wall, =q _w x/k=Q _w /(C _p L) - u velocity component in then-direction - U₀ dimensionless velocity,u/(/x) Ra _L ^2/5 - U ₁ dimensionless velocity,u/(/x) Ra _w ^2/5 - velocity component in they-direction - x coordinate parallel to the plate - y coordinate normal to the plate - thermal diffusivity - thermal expansion coefficient - pseudo-similarity variable,(y/x) - dimensionless temperature, (T–T )/(T _L ^* +T _w ^* ) - ₀ dimensionless temperature, (Ra_l)^1/5 (T–T )/T _L ^* - ₁ dimensionless temperature, (Ra_w)Ra_w)^1/5 (T–T )/T _w ^* - (Ra _L+Ra_w)^1/5 - kinematic viscosity - (1 +Ra _L/Ra_w)^–1=(1 +T _L ^* /T _w ^* )^–1=(1 + Q_L/Q_w)^–1 - density - Pr/(1 +Pr) - _w wall shear stress - stream function     

Similar solutions and the asymptotics of filtration equations

In this paper we consider the asymptotic behavior of solutions of the quasilinear equation of filtration as t. We prove that similar solutions of the equation u _t = (u )_xx asymptotically represent solutions of the Cauchy problem for the full equation u _t = [(u)]_xx if (u) is close to u for small u.     

Binary laminar boundary layer on a vertical surface in the presence of combined free and forced convection

Heat and mass transfer at a vertical surface is examined in the case of combined free and forced convection. The boundary layer equations, transformed to ordinary differential equations, contain a parameter that determines the effect of free convection on the forced motion. Criteria are offered for differentiating the free-convection, forced-convection, and combined regimes.Notation x, y coordinates - u, v velocity components - g acceleration of gravity - T temperature - kinematic viscosity - coefficient of thermal expansion - a thermal diffusivity - ₁ partial vapor density - D diffusion coefficient - W₂ mass velocity of air - independent variable - _w shear stress at wall - thermal conductivity - r latent heat of phase transition - , dimensionless temperature and partial vapor density - m^* the complex (m ₁–m _1w )/(1–m(_1w ) - c_p specific heat at constant pressure - G Grashof number - R Reynolds number - P Prandtl number - S Schmidt number     

The measurement of the material parameters of viscoelastic fluids using a rotating sphere and a rheogoniometer

Summary In this work, measurement of the flow field around a rotating sphere has been used to obtain the material parameters of a second-order Rivlin-Ericksen fluid. Experiments were carried out with a Laser-Doppler anemometer to obtain the velocity distribution and usingGiesekus' analysis, the material parameters for the second-order fluid were obtained.

---

Zusammenfassung In dieser Untersuchung wird die Ausmessung des Strömungsfeldes um eine rotierende Kugel dazu verwendet, um die Stoffparameter einer Rivlin-Ericksen-Flüssigkeit zweiter Ordnung zu erhalten. Die Experimente zur Bestimmung der Geschwindigkeitsverteilung werden mit einem Laser-Doppler-Anemometer durchgeführt, und zur Auswertung der Parameter der Flüssigkeit zweiter Ordnung wird eine Analyse vonGiesekus benutzt.

---

Notations A ₁,A₂ Rivlin-Ericksen tensor - A ² Parameter used in eq. [12] - a Radius of the sphere - B Parameter used in eq. [12] - I Unit tensor - m ₀(₁ – ₂)/a², parameter used by ref. (8) - N ₁,N₂ First and second normal stress difference - p Isotropic pressure - Radial distance from the centre of the rotating body - S ₁,S₂ Stress tensor - v _r,v,v Velocity components in a spherical coordinate system - ₀,₁,₂ Material parameters used in eq. [2] - Shear rate - _a Apparent voscosity - ₀ Zero-shear viscosity - Angle measured from the axis of rotation - Fluid density - Stream function - Shear stress - Angular velocity With 3 figures     

A class of nonlinear,completely integrable abstract wave equations

IfL is a positive self-adjoint operator on a Hubert spaceH, with compact inverse, the second-order evolution equation int,u+Lu+u _H ² u=0 has an infinite number of first integrals, pairwise in involution. It follows from this that no nontrivial solution tends weakly to 0 inH ast. Under an additional separation assumption on the eigenvalues ofL, all trajectories (u,u) are relatively compact inD(L ^1/2)×H. Finally, if all the eigenvalues are simple, the set of initial values of quasi-periodic solutions is dense in the ball B=(u ₀,u ₀ )D(L ^1/2)×H; L^1/2 u _{0 H} ² +u ² < for sufficiently small.     

Mixed convection from a horizontal plate to fluids of any Prandtl number

Laminar mixed convection over a horizontal plate with uniform wall temperature or uniform wall heat flux is analyzed by introducing proper buoyancy parameters and transformation variables for fluids of any Prandtl number between 0.001 and 10,000. Both cases of buoyancy assisting and opposing flow conditions are investigated. For the buoyancy-assisting case, the obtained numerical results are very accurate over the entire range of mixed convection intensity from pure forced convection limit to pure free convection limit. For the buoyancy-opposing case, solutions are obtained from the forced convection limit to the point of breakdown.

---

Mischkonvektion an einer horizontalen Platte für Fluide mit beliebiger Prandtl-Zahl

Zusammenfassung Es wurde laminare Mischkonvektion an einer horizontalen Platte mit einheitlicher Wandtemperatur oder einheitlicher Wandwärmestromdichte bei Einführung zweckmäßiger Auftriebsparameter und Transformationsvariablen für Fluide mit beliebiger Prandtl-Zahl zwischen 0,001 und 10 000 untersucht. Es wurden die Fälle der Strömung entgegen und in Richtung der Auftriebskraft untersucht. Für den Fall der Strömung in Richtung der Auftriebskraft wurden sehr genaue numerische Ergebnisse für den gesamten Bereich der gemischten Konvektion von rein erzwungener Konvektion bis zu rein freier Konvektion erhalten. Für den Fall der Strömung entgegen der Auftriebsrichtung wurden Lösungen für erzwungene Konvektion bis zum Umkehrpunkt erhalten.

---

Nomenclature C _f local friction coefficient - f reduced stream function - g gravitational acceleration - Gr local Grashof number for UWT,g (T _w –T )x ³/ ² - Gr* local Grashof number for UHF,g q _w x ⁴/k ² - m =10 for UWT; and =6 for UHF - n =5 for UWT; and =3 for UHF - Nu local Nusselt number - p pressure - Pr Prandtl number,/ - q _w wall heat flux - Ra local Rayleigh number for UWT,Gr Pr - Ra* local Rayleigh number for UHF,Gr*Pr - Re local Reynolds number,u x/ - T fluid temperature - T _w wall temperature - T free-stream temperature - u velocity component inx-direction - u free-stream velocity - v velocity component iny-direction - x coordinate parallel to the plate - y coordinate normal to the plate Greek symbols thermal diffusivity - thermal expansion coefficient - =0 for UWT; and =1 for UHF - buoyancy parameter, =( Ra)^1/5/( Re)^1/2 for UWT; and =( Ra*)^1/6/( Re)^1/2 for UHF - pseudo-similarity variable, (y/x) - dimensionless temperature, =(T–T )/(T _w –T ) for UWT; and =(T–T )/(q _w x/k) for UHF - =[( Re)^1/2+( Ra)^1/5] for UWT; and =[( Re)^1/2+( Ra*)^1/6] for UHF - dynamic viscosity - kinematic viscosity - /(1+) - dimensionless pressure - density - Pr/(1+Pr) - _w wall shear stress,(u/y) _y=0 - stream function - Pr/(1+Pr)^1/3     

The effect of non-steady wall shear on pressure surges in conduits carrying viscous liquids

Summary A study is made of the attenuation of pressure surges in a two-dimension a channel carrying a viscous liquid when a valve at the downstream end is suddenly closed. The analysis differs from previous work in this area by taking into account the transient nature of the wall shear, which in the past has been assumed as equivalent to that existing in steady flow. For large values of the frictional resistance parameter the transient wall shear analysis results in less attenuation than given by the steady wall shear assumption.Nomenclature c /, ft/sec - e base of natural logarithms - F(x, y) integration function, equation (38) - (x) mean value of F(x, y) - g local acceleration of gravity, ft/sec² - h width of conduit, ft - k (2m–1)^{2 2} L/h ² c, equation (35) - k* 12L/h ² c, frictional resistance parameter, equation (46) - L length of conduit, ft - m positive integer - n positive integer - p pressure, lb/ft² - p ₀ constant pressure at inlet of conduit, lb/ft² - P pressure plus elevation head, p+gz, equation (4) - mean value of P over the conduit width h - P ₀ p ₀+gz ₀, lbs/ft² - R frictional resistance coefficient for steady state wall shear, lb sec/ft⁴ - s positive integer; also, condensation, equation (6) - t time, sec - t ct/L, dimensionless time - u x component of fluid velocity, ft/sec - u _m mean velocity in conduit, equation (12), ft/sec - u ₀(y) velocity profile in Poiseuille flow, equation (19), ft/sec - transformed velocity - U initial mean velocity in conduit - x distance along conduit, measured from valve (fig. 1), ft - x x/L, dimensionless distance - y distance normal to conduit wall (fig. 1), ft - y y/h, equation (25) - z elevation, measured from arbitrary datum, ft - z ₀ elevation of constant pressure source, ft - isothermal bulk compression modulus, lbs/ft² - _n , equation (37) - _n (2n–1)/2, equation (36) - viscosity, slugs/ft sec - / = kinematic viscosity, ft²/sec - density of fluid, slugs/ft³ - ₀ density of undisturbed fluid, slugs/ft³ - ø angle between conduit and vertical (fig. 1) The research upon which this paper is based was supported by a grant from the National Science Foundation.     

Berechnung der Wärmestrahlung in athermanen Medien mittels einer verallgemeinertenn-Flußmethode

Zusammenfassung Zur Beschreibung des Strahlungsenergieaustauschs wird eine systematisch erweiterbaren-Flußmethode entwickelt, die für die Richtungsabhängigkeit der Strahlungsintensität einen Potenzreihenansatz verwendet. Hierdurch sind gegenüber klassischen Flußmethoden die Strahlungsflüsse in verschiedenen Richtungen stärker gekoppelt, und es kann die Flußanzahl unabhängig von der Dimensionalität des Gesamtmodells gewählt werden. Strahlungsberechnungen an eindimensionalen Geometrien zeigen durch Vergleich mit exakten Lösungen die mit der Flußanzahl wachsende Genauigkeit der Methode bei mittleren optischen Dichten bis hin zu einem 9-Flußmodell.

---

Prediction of the thermal radiation in atherm media with an extendablen-flux-method

To describe the exchange of radiation energy has been developed a systematically extendablen-flux-method which copes with the direction-dependency of radiation intensity by using a power series approach. Compared with classical flux-methods there is in this case a stronger linkage among the radiation fluxes in different directions and, moreover, the number of fluxes may be selected irrespective of the dimensionality of the overall model. Radiation calculations on onedimensional geometries have demonstrated, by way of comparison with exact solutions, the increasing accuracy of the method, with medium optical densities, up to a 9-flux-model.

---

Formelzeichen A m² Fläche - e ₁,e ₂,e ₃ Einheitsvektoren - e₁, e₂, e₃ Richtungskosinus - f W/m² sr differentieller, vektorieller Strahlungsfluß - f W/m³ sr spektraler, differentieller, vektorieller Strahlungsfluß - g W/m² skalarer Strahlungsfluß - g W/m³ spektraler, skalarer Strahlungsfluß - h J_s Plancksches Wirkungsquantum - i W/m² sr Strahlungsintensität - g _b W/m³ sr spektrale Strahlungsintensität eines - i _ij W/m² sr Intensitätskoeffizienten - i W/m³ sr spektrale Strahlungsintensität - k J/K Boltzmann-Konstante - L m Spaltbreite - R m Zylinderradius - r={r,, z} m Ortsvektor - T K Temperatur - _w, _w Absorptions-, Emissionsgrad der Wand - =r/R norm. radiale Koordinate - _A , _S m^–1 Absorptions-, Streukoeffizient - _A, , _S, m^–1 spektraler Absorptions-, Streukoeffizient - m Wellenlänge - =2z/L norm, axiale Koordinate - ₀=_A L/2 optische Dichte - ₀= _A R optische Dichte - W/m² K⁴ Stefan-Boltzmann-Konstante - _s W/m² Strahlungsfluß - ={, } Richtungseinheitsvektor - _n Normaleneinheitsvektor an der Wand Indizes W Wand - + vorwärtig - – rückwärtig     

Lp-estimates for the nonlinear spatially homogeneous Boltzmann equation

This paper studies L^p-estimates for solutions of the nonlinear, spatially homogeneous Boltzmann equation. The molecular forces considered include inverse k^th-power forces with k > 5 and angular cut-off.The main conclusions are the following. Let f be the unique solution of the Boltzmann equation with f(v,t)(1 + ¦v²¦)^(s ₁ ^{+ /p)/2} L¹, when the initial value f ₀ satisfies f ₀(v) 0, f ₀(v) (1 + ¦v¦²)^(s ₁ ^{+ /p)/2} L¹, for some s₁ 2 + /p, and f ₀(v) (1 + ¦v¦²)^s/2 L^p. If s 2/p and 1 < p < , then f(v, t)(1 + ¦v¦²)^{(s s} ₁)^/2 L^p, t > 0. If s >2 and 3/(1+ ) < p < , thenf(v,t) (1 + ¦v¦²)^(s(s ₁ ^{+ 3/p))/2} L^p, t > 0. If s >2 + 2C₀/C₁ and 3/(l + ) < p < , then f(v,t)(1 + ¦v¦²)^s/2 L^p, t > 0. Here 1/p + 1/p = 1, x y = min (x, y), and C₀, C₁, 0 < 1, are positive constants related to the molecular forces under consideration; = (k – 5)/ (k – 1) for k^th-power forces.Some weaker conclusions follow when 1 < p 3/ (1 + ).In the proofs some previously known L-estimates are extended. The results for L^p, 1 < p < , are based on these L-estimates coupled with nonlinear interpolation.     

Method of mass-average quantities for the boundary layer in an outer flow with transverse nonuniformity

An engineering method is proposed for calculating the friction and heat transfer through a boundary layer in which a nonuniform distribution of the velocity, total enthalpy, and static enthalpy is specified across the streamlines at the initial section x₀. Such problems arise in the vortical interaction of the boundary layer with the high-entropy layer on slender blunt bodies, with sudden change of the boundary conditions for an already developed boundary layer (temperature jump, surface discontinuity), and in wake flow past a body, etc.Notation x, y longitudinal and transverse coordinates - u,, H, h gas velocity, stream function, total and static enthalpy - p,,, pressure, density, viscosity, Prandtl number - , q friction and thermal flux at the body surface - r(x), (x) body surface shape and boundary layer thickness - V, M freestream velocity and Mach number - u⁽⁰⁾(x₀,), H⁽⁰⁾(x₀,), h⁽⁰⁾(x₀,) parameter distributions at initial section - u⁽⁰⁾(x,), h⁽⁰⁾(x,), h⁽⁰⁾(x,) profiles of quantities in outer flow in absence of friction and heat transfer at the surface of the body The indices v=0, 1 relate to plane and axisymmetric flows - , w, b, relate to quantities at the outer edge of the inner boundary layer, at the body surface in viscid and nonviscous flows, and in the freestream, respectively. The author wishes to thank O. I. Gubanov, V. A. Kaprov, I. N. Murzinov, and A. N, Rumynskii for discussions and assistance in this study.     

Convective heat transfer within fibrous insulation slabs

A numerical study of convective heat flow within a fibrous insulating slab is presented. The material is treated as an anisotropic porous medium and the variation of properties with temperature is taken into account. Good agreement is obtained with available experimental data for the same geometry.

---

Zusammenfassung Für den konvektiven Wärmestrom in einem faserförmigen Isolierstoff wird eine numerische Berechnung angegeben. Der Stoff wird als anisotropes poröses Medium mit temperaturabhängigen Stoffwerten angesehen. Die Übereinstimmung mit verfügbaren Versuchswerten ist gut.

---

Nomenclature C_p specific heat of the gas at the mean temperature - Da Darcy number=k_y/H² - Gr^* modified Grashof number=gTHk_y/²= (Grashof number) × (Darcy number) - H thickness of the specimen - P gas pressure - Pr^* modified Prandtl number= C_p/_x - Ra^* modified Rayleigh number=Gr^* Pr^* - R_p ratio of permeabilities=k_y/k_x - R_k ratio of conductivities= _y/_x - T absolute temperature of the gas - t₁ absolute temperature of the hot face - T₂ absolute temperature of the cold face - T_m mean temperature of the gas=(T₁+T₂)/2 - k_x specific permeability of the porous medium along the x-direction - k_y specific permeability of the porous medium along the y-direction - p T/T_m - q exponent - r exponent - u gas velocity along the x-direction - v gas velocity along the y-direction - X_* distance along the x-direction - y_* distance along the y-direction - T temperature difference=t₁–T₂ - thermal coefficient of expansion of the gas - _m thermal coefficient of expansion of the gas at the mean temperature - _* T–T_m - dimensionless temperature= ^*/T - _a apparent thermal conductivity of the porous medium along the x-direction - _al local apparent thermal conductivity of the porous medium along the x-direction - _x thermal conductivity of the porous medium along the x-direction in the absence of convection - _y thermal conductivity of the porous medium along the y-direction in the absence of convection - dynamic viscosity of the gas - _m dynamic viscosity of the gas at the mean temperature - kinematic viscosity of the gas - _m kinematic viscosity of the gas at the mean temperature - density of the gas - _m density of the gas at the mean temperature - ^* stream function at any point - dimensionless stream function= ^*/( _m/_m)     

Flow of a simple non-newtonian fluid past a sphere

Summary Creeping flow past a sphere is solved for a limiting case of fluid behaviour: an abrupt change in viscosity.List of Symbols d _ij Component of rate-of-deformation tensor - F _d Drag force exerted on sphere by fluid - G ^(d) Coefficients in expression for _ij in terms of d _ij - G _YOJK ^(d) Coefficients in power series representing G ^(d) - R Radius of sphere - r Spherical coordinate - V Velocity of fluid very far from sphere - v _i Component of the velocity vector - x Dimensionless radial distance, r/R - x _i Rectangular Cartesian coordinate - Dimensionless quantity defined by (26) - ^(d) Potential defined by (7) - Value of x denoting border between Regions 1 and 2 as a function of - ₁, ₂ Lower and upper limiting viscosities defined by (10) - Spherical coordinate - * Value of for which =1 - Value of denoting border between regions 1 and 2 as a function of x - Newtonian viscosity - _ij Component of the stress tensor - Spherical coordinate - ₁, ₂ Stream functions defined by (12) and (14) - Second and third invariants of the stress tensor and of the rate-of-deformation tensor, defined by (3)