共查询到20条相似文献,搜索用时 46 毫秒
1.
采用湿化学还原法在自组装的单层阵列二氧化硅纳米粒子表面沉积银膜制备了SiO2核/Ag帽复合纳米结构。通过透射电镜(TEM)、扫描电镜(SEM)、X射线衍射(XRD)和紫外-可见分光光度计(UV/Vis)研究和表征了该复合纳米结构的表面形貌、结构及光学性质。所制备的复合纳米粒子表面粗糙,其表面呈现无数纳米级谷粒状结构,SiO2内核粒径为350nm的银纳米帽的表面等离子共振吸收的2个共振峰分别位于382和689nm处。以亚甲基蓝作为探测分子研究了SiO2粒径为350和450nm的SiO2/Ag帽状复合纳米粒子的表面增强拉曼散射(SERS)活性,增强因子分别为3.6×109和3.9×109。结果表明,湿化学还原法制备的SiO2核/Ag帽复合纳米结构是很好的拉曼活性基底。 相似文献
2.
帽状铜纳米粒子的制备及表面增强拉曼散射活性研究 总被引:2,自引:0,他引:2
采用真空热蒸发法在SiO2纳米粒子自组装单层膜上沉积铜薄膜制备了帽状铜纳米粒子。用扫描电镜、原子力显微镜和紫外-可见-近红外分光光度计对帽状复合纳米粒子的表面形貌和光学性质进行了表征。以亚甲基蓝和吡啶-(2-偶氮-4)间苯二酚为探针分子,研究了该复合纳米粒子的表面增强拉曼散射(SERS)活性。通过比较吸附在不同基底上的吡啶-(2-偶氮-4)间苯二酚的谱峰强度,探讨了SERS效应与表面等离子体共振(SPR)的关系。 相似文献
3.
帽状金纳米结构的制备、表征及表面增强拉曼散射活性 总被引:1,自引:0,他引:1
采用真空离子溅射法在自组装的单层阵列二氧化硅纳米粒子表面沉积金薄膜, 制备了以SiO2为核的帽状金纳米结构. 用透射电镜、扫描电镜、原子力显微镜、X 射线衍射仪和紫外-可见-近红外分光光度计对样品的表面形貌、结构及光学性质进行了表征. 以亚甲基蓝作为探针分子, 对金纳米帽的表面增强拉曼散射活性进行了研究, 结果显示, 吸附在金纳米帽上的分子拉曼散射信号得到显著增强, 增强因子达到107数量级. 该基底在超灵敏生物和化学检测方面具有潜在的应用前景. 相似文献
4.
5.
采用自组装方法,分别以1,4-二巯基苯和对巯基苯胺为偶联分子,在光滑银基底表面上构筑了银纳米粒子的单层和双层有序结构.表面增强拉曼光谱研究表明,在有序银纳米粒子组装体中偶联分子的拉曼散射得到很大增强,其中1,4-对巯基苯的拉曼散射增强效应主要来自光滑银基底表面与单层银纳米粒子间的电磁耦合,而对巯基苯胺的拉曼散射增强效应则主要由两层银纳米粒子之间耦合作用所致.两种不同的耦合作用所产生的增强效应大致相近. 相似文献
6.
构建了具有表面增强拉曼散射(SERS)活性的二维有序环状与盘状的银纳米粒子结构, 利用CTAB包覆银纳米粒子的氯仿溶液直接在图案化的金基底上进行去湿, 当改变银纳米粒子的浓度时可以得到不同的图案. 利用原子力显微镜(AFM)对其结构进行了表征, 以4-巯基吡啶作为探针分子, 采用表面增强拉曼成像技术研究了这种基底的SERS活性, 这将为SERS的研究开拓新的领域. 相似文献
7.
采用溶胶-水热法制备了不同尺寸的SnO2纳米粒子, 并将其作为表面增强拉曼散射(Surface-enhanced Raman scattering, SERS)活性基底, 重点探讨了表面缺陷能级与SERS性能的关系. 观察到4-巯基苯甲酸(4-MBA)吸附在150 ℃水热合成的SnO2纳米粒子上的SERS 信号最强, 随着在空气中煅烧温度的升高, SERS信号逐渐减弱. 分别用透射电子显微镜、 紫外-可见光谱、 荧光光谱、 X射线衍射和X射线光电子能谱对SnO2纳米粒子进行了表征. 结果表明, SnO2纳米粒子的表面氧空位和缺陷等表面性质在增强拉曼散射性能中发挥着重要的作用, 表面氧空位和缺陷等含量越高其SERS信号就越强. 相似文献
8.
纳米TiO2的光致发光性能与SERS效应的关系 总被引:2,自引:0,他引:2
以采用溶胶-水热法制备的纯TiO2及Zn掺杂的TiO2纳米粒子作为SERS活性基底, 研究了其光致发光机制及其与表面增强拉曼散射(SERS)性能的关系. 结果表明, TiO2纳米粒子的表面缺陷和氧空位等表面性质在其光致发光和增强拉曼散射性能中发挥着重要的作用. 在表面缺陷和氧空位含量较低时, TiO2纳米粒子的光致发光光谱(PL)信号越强, 其SERS性能就越高; 当TiO2纳米粒子的表面缺陷和氧空位含量达到一定程度时, TiO2纳米粒子的PL信号越弱, 其SERS性能越高. 相似文献
9.
通过匹配激光光斑直径与胶体微球的尺寸, 设计制备了银纳米粒子的表面增强拉曼散射(SERS)基底, 并将其用于研究单个银纳米粒子簇的表面增强拉曼光谱. 在制备纳米粒子的过程中, 考察了等离子体刻蚀时间与银沉积厚度对“单”银纳米粒子结构与形貌的影响. 将吡啶、 巯基苯和罗丹明R6G作为SERS探针分子, 研究了其SERS效应, 通过荧光共振能量转移(FRET)机理, 实现了染料分子在单银纳米粒子簇上的SERS效应. SERS光谱测试与相关计算结果表明, 单个银纳米粒子簇的拉曼增强因子能够达到约106. 相似文献
10.
提出一种预聚集方法来制备单层银纳米粒子膜, 获得了高活性的表面增强拉曼散射基底. 利用紫外-可见吸收光谱、TEM, SEM等表征手段分析了预聚集程度对银纳米单层膜基底SERS活性的影响. 实验发现该方法制备的银纳米粒子膜的SERS活性与预聚集程度直接相关, 在最优参数下制备的SERS基底具有银颗粒分布均匀、SERS活性均一、增强效果好等优点. 实验分别以罗丹明6G (R6G)、3-巯基丙酸(3MPA)和9-氨基吖啶盐酸盐(9AA)为探针对所制备基底的SERS活性进行了测试, 结果均获得了高信噪比的SERS信号. 相似文献
11.
Z. Y. Ren W. Y. Liu Y. M. Hou Y. Zhu L. K. Chang D. Z. Ma 《Journal of Thermal Analysis and Calorimetry》2001,63(1):153-160
Thermogravimetry (TG) was employed to study the thermal degradation kinetics of poly(etherketone/sulfone)ethylimide (PEK-IE and PES-IE). The corresponding decomposition activation energies and reaction orders were obtained and the comparison was made with their parent polymerspoly(ether-ketone/sulfone) with Cardo group (PEK-C and PES-C). The results show that the degradation activation energies of PEK-IE and PES-IE were lower than that of PEK-C and PES-C; and two stages of the degradation process were found for all the four polymers. For PEK-IE and PES-IE, the activation energies in the first decomposition stage are much lower than that in the second stage and the two stages can be taken as slow induction and fast degradation, whereas for PEK-C and PES-C the activation energies in the first decomposition stage are larger than that in the second stage, and the two stages can both be taken as two fast degradation stages. The decomposition mechanism of the two stages was also speculated.This revised version was published online in November 2005 with corrections to the Cover Date. 相似文献
12.
Three Stereoisomeric Square-Pyramidal Complexes [Ma3b2]: Investigations of the Existence and the Structures of Crystalline Dimethyl Sulfoxide Complexes of Antimony and Bismuth Trichlorides The formation of solid complexes MCl3 · n DMSO (M = Sb, Bi; n = 1–4) was reinvestigated. In each system, only two of four presumptive complexes could be isolated as crystalline solids: SbCl3 · DMSO ( 1 a ) was prepared for the first time, SbCl3 · 2 DMSO ( 1 b ), BiCl3 · 2 DMSO ( 2 b ) and BiCl · 3 DMSO ( 2 c ) were reproduced according to literature data. Evidence is presented as to the non-existence of BiCl3 · 4 DMSO, contrary to previous claims in the literature. A unit cell determination showed 2 c to be structurally identical with the monomeric fac-octahedral complex BiCl3(DMSO)3 obtained fortuitously and described elsewhere [Z. anorg. allg. Chem. 620 (1994) 1037]. The compounds 1 a (monoclinic, space group P21/c), 1 b (monoclinic, space group P21/n) and 2 b (monoclinic, space group C2) represent examples of each of the three possible geometric isomers of a square-pyramidal complex [Ma3b2]. In the formally 1/1 adduct 1 a , which is in fact [Sb(1)Cl3(DMSO)2 · Sb(2)Cl3], the Sb(1) atom of the complex unit displays square-pyramidal geometry with the DMSO ligands situated in the apical and one of the basal positions. These units are linked into chains by SbCl3 molecules acting as Cl-acceptors. Sb(2) forms two chelating chloro-bridges with cis-Cl atoms of one neighbouring complex and a third chloro-bridge with the remaining Cl of the symmetry-related second neighbour. The resulting Cl6-geometry around Sb(2) is distorted octahedral. 1 b consists of square-pyramidal molecules, in which the DMSO ligands occupy two basal cis-positions; the monomeric units are loosely linked through the apical Cl atoms to form a chain of octahedra sharing trans-vertices. The asymmetric unit of 2b is a square pyramid with trans-basal DMSO ligands. The pyramids are connected by symmetry-equivalent basal chlorine atoms into chains of octahedra sharing cis-vertices. 1a displays remarkably short Sb? O dative bonds (204.7/212.9 pm); the M? O bond distances of 1b and 2b are 223.0/234.6 and 234.5/238.7 pm, respectively. 相似文献
13.
Synthesis, Crystal Structures, and Vibrational Spectra of [OsCl(acac)(EPh3)], E = P, As, Sb By reaction of tetrachloroacetylacetonatoosmate(IV) with PPh3, AsPh3 or SbPh3 in ethanol the complexes [OsCl(acac)(EPh3)], E = P, As, Sb are formed, which are purified by chromatography on silica gel. X-ray crystal structure determinations of the isotypic single crystals of [OsCl(acac)(EPh3)] (monoclinic, space group P 21/c, Z = 4; E = P ( 1 ): a = 12.972(2), b = 18.255(2), c = 16.517(2) Å, β = 112.61(2)°; E = As ( 2 ): a = 13.173(5), b = 18.299(5), c = 16.429(5) Å, β = 112.346(5)°; E = Sb ( 3 ): a = 13.573(3), b = 18.520(3), c = 16.440(9) Å, β = 111.78(2)°) result in mean bond distances Os–P = 2.412, Os–As = 2.485, Os–Sb = 2.619, Os–Cl = 2.354 and Os–O = 2.032 Å. The IR spectra (10 K) exhibit the inner ligand vibrations of the acac and EPh3 groups with nearly constant frequencies and the stretching vibrations of OsP at 500–524, of OsAs at 330–339, of OsSb at 271–278, of OsCl at 317–322 and of Os–O in the range 460–694 cm–1. 相似文献
14.
In order to correlate 119Sn Mössbauer parameters and structural data for dimethyltin(IV) derivatives, the molecular structures of bis(acetato)dimethyltin(IV) and bis(trifluoroacetato)dimethyltin(IV) were determined by single crystal X-ray diffration. Crystals of Me2Sn(OOCCH3)2 are monoclinic, a = 26.282(4), b = 5.282(1), c = 14.434(3) Å, β = 101.17(2)°, Z = 8, space group C2/c, and those of [Me2Sn(OOCCF3)2]n are monoclinic, a = 8.444(1), b = 17.689(1), c = 15.368(1) Å, β = 93.013(9)°, Z = 8, space group Cc. The structures were solved by the Patterson method and were refined by full-matrix least-squares procedures to R = 0.025 and 0.027 (Rw = 0.023 and 0.030) for 2 298 and 4 182 reflections with I ≥ 3σ(F2), respectively. 相似文献
15.
Sergey Chernyy Jyoti P. Mahalik Rajeev Kumar Jacob Judas Kain Kirkensgaard Matthias M. L. Arras Hyeyoung Kim Lars Schulte Sokol Ndoni Gregory S. Smith Kell Mortensen Bobby G. Sumpter Thomas P. Russell Kristoffer Almdal 《Journal of polymer science. Part A, Polymer chemistry》2018,56(22):1491-1504
Fundamental understanding of microphase separation in ABC miktoarm copolymers is vital to access a plethora of nonconventional morphologies. Miktoarm stars based on poly(cis 1,4-isoprene) (I), poly(styrene) (S), and poly(2-vinylpyridine) (V) are model systems, which allow systematic studies of the effects of composition, chemical microstructure, and temperature on the thermodynamics of microphase separation. Eleven ISV-x (I:S:V = 1:1:x, v:v:v) miktoarm copolymers were synthesized by anionic polymerization affording well-defined copolymers with a variable V arm. Equilibrium bulk morphologies of all samples, as evidenced by small-angle X-ray scattering, transmission electron microscopy (TEM), and self-consistent field theory, showed a systematic transition from lamellae (x ≈ 0–0.2) to [8.8.4] tiling (x ≈ 0.6–0.9) to cylinders in undulating lamellae (x ≈ 2–4) and, finally, to hexagonally packed core–shell cylinders (x ≈ 5–8). Chemical microstructure of the I arm [poly(cis 1,4-isoprene)] versus poly(3,4-isoprene) is shown to play important role in affecting morphological behavior. To reconcile differences between ISV-x star morphologies reported in the literature and those reported herein, even for the same composition, effects of the microstructure of I arm on the Flory–Huggins parameter between I and V arms were taken into account in a qualitative manner. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1491–1504 相似文献
16.
Chikara Tsutsumi Katsuhiro Yamamoto Akiko Ichimaru Mitsufumi Nodono Katsuhiko Nakagawa Hajime Yasuda 《Journal of polymer science. Part A, Polymer chemistry》2003,41(22):3572-3588
Diblock copolymerizations of L - or D,L -lactide (LA) with trimethylene carbonate (TMC) or 2,2-dimethyltrimethylene carbonate (2,2-DTMC) with SmMe(C5Me5)2-(tetrahydrofuran) as an initiator and triblock copolymerizations of L - or D,L -LA/cyclic carbonates/L - or D,L -LA with [Sm(C5Me5)2]2(PhCCCCPh) as an initiator generated the desired block copolymers. This article describes the comparison of biodegradabilities by proteinase K and a compost and mechanical properties between the resulting di- or triblock copolymers and random copolymers composed of L - or D,L -LA and cyclic carbonates. The scanning electron microscopic profiles of resulting polymers were measured to understand the morphological change during biodegradation. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3572–3588, 2003 相似文献
17.
18.
Summary: The thermal degradation behavior of poly(ε-caprolactone) (PCL) and poly(L-lactic acid) (PLA) have been studied in different environment. It was found that these polymers undergo completely different degradation processes in nitrogen and oxygen atmosphere. In oxygen environment PCL and PLA mainly decompose to CO2, CO, water and short-chain acids. In nitrogen atmosphere PCL releases 5-hexenioc acid, CO2, CO and ε-caprolactone, whereas PLA decomposes to acetaldehyde, CO2, CO and lactide. The polymer blends of poly(3-hydroxybutyrate) (PHB) with PCL and PLA decompose similar to the individual homopolymers with crotonic acid as the initial decomposition product of PHB. 相似文献
19.
20.
A synthetical equation is proposed to characterize the essential features of the inverse "S" type curve on the oasis of summing-up simulation approach of "S" type curve.The two physical variables in the model obtained are discussed and the detailed method used to determine the parameters is given.The model is then presented to describe the crystallization of poly(caryleher ether ketone) (PEEK) and thermal decomposition of poly (amide-imide) (PAl) respectively.It is found that some thermal characteristic parameters can be well estimated from the model simulated in computer. 相似文献