Photophysical investigation of neutral and diprotonated free-base bis(arylethynyl)porphyrins

The photophysical properties for a series of free-base arylethynyl porphyrins and the corresponding trans-disubstituted tetraphenylporphyrin (H(2)TPP) derivatives lacking arylethynyl functionalities have been studied via electronic absorption and emission spectroscopy in both neutral and diacid forms. Enhanced substituent effects on porphyrin absorption spectra are observed in the arylethynyl porphyrins relative to the H(2)TPP derivatives, owing to the presence of the ethynyl spacer that allows for a coplanar geometry between the porphyrin macrocycle and the appended phenyl substituents. Upon protonation, both series of porphyrins exhibit substantially red shifted absorption and emission spectra and enhanced oscillator strengths, with the magnitude of the spectral shifts being more substantial in the presence of the ethynyl functionalities. Spectral features of the arylethynyl porphyrin bearing p-dimethylamino substituents closely resemble those previously classified as "hyperporphyrin spectra" and are indicative of excited-state charge-transfer character. Protonation of both series of porphyrins results in reduced fluorescence lifetimes and enhanced nonradiative decay rates, and the impact of protonation on these parameters is attenuated in the presence of the arylethynyl functionalities. Our results coupled with previous structural data showing that arylethynyl porphyrins exhibit less structural distortion upon diacid formation relative to H(2)TPP further substantiate the proposal that significant alteration of porphyrin photophysical properties upon diacid formation can be attributed to nonplanar structural distortions induced by protonation.     

Investigation of stepwise covalent synthesis on a surface yielding porphyrin-based multicomponent architectures

Porphyrins have been shown to be a viable medium for use in molecular-based information storage applications. The success of this application requires the construction of a stack of components ("electroactive surface/tether/charge-storage molecule/linker/electrolyte/top contact") that can withstand high-temperature conditions during fabrication (up to 400 degrees C) and operation (up to 140 degrees C). To identify suitable chemistry that enables in situ stepwise synthesis of covalently linked architectures on an electroactive surface, three sets of zinc porphyrins (22 altogether) have been prepared. In the set designed to form the base layer on a surface, each porphyrin incorporates a surface attachment group (triallyl tripod or vinyl monopod) and a distal functional group (e.g., pentafluorophenyl, amine, bromo, carboxy) for elaboration after surface attachment. A second set designed for in situ dyad construction incorporates a single functional group (alcohol, isothiocyanato) that is complementary to the functional group in the base porphyrins. A third set designed for in situ multad construction incorporates two identical functional groups (bromo, alcohol, active methylene, amine, isothiocyanato) in a trans configuration (5,15-positions in the porphyrin). Each porphyrin that bears a surface attachment group was found to form a good quality monolayer on Si(100) as evidenced by the voltammetric and vibrational signatures. One particularly successful chemistry identified for stepwise growth entailed reaction of a surface-tethered porphyrin-amine with a dianhydride (e.g., 3,3',4,4'-biphenyltetracarboxylic dianhydride), forming the monoimide/monoanhydride. Subsequent reaction with a diamine (e.g., 4,4'-methylene-bis(2,6-dimethylaniline)) gave the bis(imide) bearing a terminal amine. Repetition of this stepwise growth process afforded surface-bound oligo-imide architectures composed of alternating components without any reliance on protecting groups. Taken together, the ability to prepare covalently linked constructs on a surface without protecting groups in a stepwise manner augurs well for the systematic preparation of a wide variety of functional molecular devices.     

Structural and electron-transfer characteristics of O-, S-, and Se-tethered porphyrin monolayers on Si(100)

Monolayers of two classes of Zn porphyrins have been prepared and examined on Si(100). These molecules, designated as ZnPBzX- and ZnPCH2X-, contain either a benzyl (-Bz-) or a methylene (-CH2-) unit terminated with a Group VI atom (X = O, S, Se) appended to a meso-position of the porphyrin, with the nonlinking meso-substituents consisting of either mesityl (-Bz- class) or p-tolyl and phenyl (-CH2- class) units. The two series of ZnPBzX- and ZnPCH2X- monolayers on Si(100) were examined using a variety of techniques, including X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, and various electrochemical methods. The studies reveal the following characteristics of the ZnPBzX- and ZnPCH2X- monolayers. (1) Surface binding can be readily achieved to Si(100) with both relatively short (-Bz-) and very short (-CH2-) tethers regardless of the nature of the Group VI anchoring atom (O, S, Se). (2) The longer -Bz- tether affords monolayers with the porphyrin ring in a somewhat more upright orientation with respect to the surface than the shorter -CH2- tether. The more upright adsorption geometry of the porphyrins bearing the former type of linker leads to a higher packing density and more homogeneous redox thermodynamics. (3) The kinetics of electron transfer does not depend on the type of Group VI atom used for anchoring to the Si(100) surface. On the other hand, the type of linker does affect the electron-transfer rates, with the monolayers bearing the -CH2- linker exhibiting systematically faster rates than those bearing the -Bz- linker. Collectively, the studies reported herein provide a detailed picture of how the anchor atom and the linker type influence the structural and electron-transfer characteristics of these general classes of monolayers.     

Triple-decker sandwich compounds bearing compact triallyl tripods for molecular information storage applications

The design of redox-active molecules that afford multistate operation and high charge density is essential for molecular information storage applications. Triple-decker sandwich compounds composed of two lanthanide metal ions and three porphyrinic ligands exhibit a large number of oxidation states within a relatively narrow electrochemical window. High charge density requires a small footprint upon tethering triple deckers to an electroactive surface. All triple deckers examined to date for information storage have been tethered via the terminal ligand and have exhibited large footprints (approximately 670 A2). Five new homonuclear (Eu or Ce) triple deckers have been prepared (via statistical or rational methods) to examine the effect of tether attachment site on molecular footprint. Three triple deckers are tethered via the terminal ligand (porphyrin) or central ligand (porphyrin or imidazophthalocyanine), whereas two triple deckers each bear two tethers, one at each terminal ligand. The tether is a compact triallyl tripod. Monolayers of the triple deckers on Si(100) were examined by electrochemical and FTIR techniques. Each triple decker exhibited the expected four resolved voltammetric waves, owing to formation of the mono-, di-, tri-, and tetracations. The electrochemical studies of surface coverage (gamma, obtained by integrating the voltammetric waves) reveal that coverages approaching 10(-10) mol cm(-2), corresponding to a molecular footprint of approximately 170 A2, are readily achieved for all five of the triple deckers. The surface coverage observed for the tripodal functionalized triple deckers is approximately 4-fold higher than that obtained for monopodal-functionalized triple deckers (carbon, oxygen, or sulfur anchor atoms) attached to either Si(100) or Au(111). The fact that similar, relatively high, surface coverages can be achieved regardless of the location (or number) of the tripodal tether indicates that the tripodal functionalization, rather than the location of the tether, is the primary determinant of the packing density.     

Porphyrin architectures tailored for studies of molecular information storage

A molecular approach to information storage employs redox-active molecules tethered to an electroactive surface. Zinc porphyrins tethered to Au(111) or Si(100) provide a benchmark for studies of information storage. Three sets of porphyrins have been synthesized for studies of the interplay of molecular design and charge-storage properties: (1) A set of porphyrins is described for probing the effect of surface attachment atom on electron-transfer kinetics. Each porphyrin bears a meso-CH2X group for surface attachment where X = OH, SAc, or SeAc. (2) A set of porphyrins is described for studying the effect of surface-charge density in monolayers. Each porphyrin bears a benzyl alcohol for surface attachment and three nonlinking meso substituents of a controlled degree of bulkiness. (3) A set of porphyrins is described that enables investigation of on-chip patterning of the electrolyte. Each porphyrin bears a formyl group distal to the surface attachment group for subsequent derivatization with a molecular entity that comprises the electrolyte. Taken together, this collection of molecules enables a variety of studies to elucidate design issues in molecular-based information storage.     

Porphyrins bearing mono or tripodal benzylphosphonic acid tethers for attachment to oxide surfaces

The ability to attach redox-active molecules to oxide surfaces in controlled architectures (distance, orientation, packing density) is essential for the design of a variety of molecular-based information storage devices. We describe the synthesis of a series of redox-active molecules wherein each molecule bears a benzylphosphonic acid tether. The redox-active molecules include zinc porphyrins, a cobalt porphyrin, and a ferrocene-zinc porphyrin. An analogous tripodal tether has been prepared that is based on a tris[4-(dihydroxyphosphorylmethyl)phenyl]-derivatized methane. A zinc porphyrin is linked to the methane vertex by a 1,4-phenylene unit. The tripodal systems are designed to improve monolayer stability and ensure vertical orientation of the redox-active porphyrin on the electroactive surface. For comparison purposes, a zinc porphyrin bearing a hexylphosphonic acid tether also has been prepared. The synthetic approaches for introduction of the phosphonic acid group include derivatization of a bromoalkyl porphyrin or use of a dimethyl or diethyl phosphonate substituted precursor in a porphyrin-forming reaction. The latter approach makes use of dipyrromethane building blocks bearing mono or tripodal dialkyl phosphonate groups. The zinc porphyrin-tripodal compound bearing benzylphosphonic acid legs tethered to a SiO(2) surface (grown on doped Si) was electrically well-behaved and exhibited characteristic porphyrin oxidation/reduction waves. Collectively, a variety of porphyrinic molecules can now be prepared with tethers of different length, composition, and structure (mono or tripodal) for studies of molecular-based information storage on oxide surfaces.     

REGIOSELECTIVE PHOTOREDUCTION OF ZINC(II) PORPHYRINS TO GIVE CHLORINS

The ascorbic acid/organic base photoreduction of zinc(II) porphyrins was investigated. It was established that certain substituents can direct the photoreduction to the site of the macrocycle to which they are attached. For example, zinc(II) vinylporphyrins (8, 12, 16, 20) are photoreduced with cis stereochemistry on the ring bearing the vinyl group to give the corresponding chlorins. Zinc(II) acetylporphyrins (22, 24) were likewise reduced to chlorins such that cis-hydrogenation took place on the ring bearing the acetyl group. Zinc(II) formylporphyrins 33 also appear to reduce at the ring bearing the formyl group. When the zinc(II) acrylic porphyrin 28 was photoreduced, reduction did take place at the ring bearing the acrylic side chain, but migration of the acrylate double bond was very rapid, and the product isolated was the corresponding porphyrin propionate 30. Reduction of a zinc(II) porphyrin 35 bearing both a vinyl group and a nuclear carboxylic ester took place at the ring bearing the carboxylic ester. The reaction provides a general method for regioselective synthesis of chlorins from zinc(II) porphyrins without any evidence of formation of over-reduction products characteristic of many other procedures for formation of chlorins from porphyrin precursors.     

Synthesis of thiol-derivatized porphyrin dimers and trimers for studies of architectural effects on multibit information storage

We present the rational design and synthesis of multiporphyrin arrays containing thiol-derivatized linkers for the purpose of multibit molecular information storage. Porphyrin dimers and trimers were synthesized by the Pd-mediated coupling of iodo-substituted and ethynyl-substituted porphyrin building blocks in 5-51% yields. Each porphyrin dimer bears one S-acetylthio group. The architecture of the trimers incorporates a trans-substituted porphyrin (central) bearing two S-acetylthio groups and two diphenylethyne-linked porphyrins (wings) in a trans geometry. The central porphyrin and the wing porphyrins bear distinct substituents and central metals, thereby affording different oxidation potentials. The S-acetylthio groups provide a means for attachment of the arrays to an electroactive surface. The dimers are designed for vertical orientation on an electroactive surface while the trimers are designed for horizontal orientation of the central porphyrin. Altogether seven different arrays were synthesized. Each array forms a self-assembled monolayer (SAM) on gold via in situ cleavage of the S-acetyl protecting group. The SAM of each array is electrochemically robust and exhibits multiple, reversible oxidation waves. In general, however, the trimeric arrays appear to form more highly ordered monolayers that exhibit sharper, better-defined redox features.     

Porphyrin dyads bearing carbon tethers for studies of high-density molecular charge storage on silicon surfaces

Redox-active molecules that afford high charge density upon attachment to an electroactive surface are of interest for use in molecular-based information-storage applications. One strategy for increasing charge density is to covalently link a second redox center to the first in an architecture that uses the vertical dimension in essentially the same molecular footprint. Toward this end, a set of four new porphyrin dyads have been prepared and characterized. Each dyad consists of two zinc porphyrins, an intervening linker (p-phenylene or 4,4'-diphenylethyne), and a surface attachment group (ethynyl or triallyl group). The porphyrin dyads were attached to an electroactive Si(100) surface and interrogated via electrochemical and FTIR techniques. The charge density obtainable for the ethynyl-functionalized porphyrin dyads is approximately double that observed for an analogously functionalized monomer, whereas that for the triallyl-functionalized dyads is at most 40% larger. These results indicate that the molecular footprint of the former dyads is similar to that of a monomer while that of the latter dyads is larger. For both the ethynyl- and triallyl-functionalized porphyrin dyads, higher charge densities (smaller molecular footprints) are obtained for the molecules containing the 4,4'-diphenylethyne versus the p-phenylene linker. This feature is attributed to the enhanced torsional flexibility of the former linker compared with that of the latter, which affords better packed monolayers. The FTIR studies indicate that the adsorption geometry of all the dyads is qualitatively similar and similar to that of monomers. However, the dyads containing the 4,4'-diphenylethyne linker sit somewhat more upright on the surface than those containing the p-phenylene linker, generally consistent with the smaller molecular footprint for the former dyads. Collectively, the high surface charge density (34-58 muC.cm(-)(2)) of the porphyrin dyads makes these constructs viable candidates for molecular-information-storage applications.     

DNA as supramolecular scaffold for porphyrin arrays on the nanometer scale

Tetraphenyl porphyrin substituted deoxyuridine was used as a building block to create discrete multiporphyrin arrays via site specific incorporation into DNA. The successful covalent attachment of up to 11 tetraphenyl porphyrins in a row onto DNA shows that there is virtually no limitation in the amount of substituents, and the porphyrin arrays thus obtained reach the nanometer scale (approximately 10 nm). The porphyrin substituents are located in the major groove of the dsDNA and destabilize the duplex by deltaT(m) 5-7 degrees C per porphyrin modification. Force-field structure minimization shows that the porphyrins are either in-line with the groove in isolated modifications or aligned parallel to the nucleobases in adjacent modifications. The CD signals of the porphyrins are dominated by a negative peak arising from the intrinsic properties of the building block. In the single strands, the porphyrins induce stabilization of a secondary helical structure which is confined to the porphyrin modified part. This arrangement can be reproduced by force-field minimization and reveals an elongated helical arrangement compared to the double helix of the porphyrin-DNA. This secondary structure is disrupted above approximately 55 degrees C (T(p)) which is shown by various melting experiments. Both absorption and emission spectroscopy disclose electronic interactions between the porphyrin units upon stacking along the outer rim of the DNA leading to a broadening of the absorbance and a quenching of the emission. The single-stranded and double-stranded form show different spectroscopic properties due to the different arrangement of the porphyrins. Above T(p) the electronic properties (absorption and emission) of the porphyrins change compared to room temperature measurements due to the disruption of the porphyrin stacking at high temperature. The covalent attachment of porphyrins to DNA is therefore a suitable way of creating helical stacks of porphyrins on the nanometer scale.     

Structural and electron-transfer characteristics of carbon-tethered porphyrin monolayers on Si(100)

Structural and electron-transfer characteristics are reported for two classes of zinc porphyrin monolayers attached to Si(100) surfaces via Si-C bonds. One class, designated ZnP(CH(2))(n)- (n = 2-4), contains an alkyl linker appended to the meso-position of the porphyrin, with the nonlinking substituents being p-tolyl groups. The other, designated ZnPPh(CH(2))(n)- (n = 0-3), contains a phenyl or phenylalkyl linker appended to the meso-position of the porphyrin, with the nonlinking substituents being mesityl groups. Both classes of zinc porphyrin monolayers on Si(100) were examined using Fourier transform infrared spectroscopy and various electrochemical methods. The studies reveal the following: (1) The structural and electron-transfer characteristics of the ZnP(CH(2))(n)- and ZnPPh(CH(2))(n)- monolayers are generally similar to those of monolayers formed from porphyrins with analogous linkers, but anchored with an O, a S, or a Se atom. (2) The ZnP(CH(2))(n)-, ZnPPh-, and ZnPPhCH(2)- monolayers exhibit lower saturation coverages and have their porphyrin ring more tilted with respect to the surface normal than the ZnPPh(CH(2))(2)- and ZnPPh(CH(2))(3)- monolayers. (3) The electron-transfer rates for both the ZnP(CH(2))(n)- and ZnPPh(CH(2))(n)- classes of monolayers monotonically decrease as the length of the linker increases. (4) For all the ZnP(CH(2))(n)- and ZnPPh(CH(2))(n)- monolayers, both electron-transfer rates and charge-dissipation rates decrease monotonically as the surface coverage increases. Collectively, the studies reported herein provide a detailed picture of how the linker type influences the structural and electron-transfer characteristics of these general classes of monolayers.     

Diverse redox-active molecules bearing identical thiol-terminated tripodal tethers for studies of molecular information storage

To examine the effects of molecular structure on charge storage in self-assembled monolayers (SAMs), a family of redox-active molecules has been prepared wherein each molecule bears a tether composed of a tripodal linker with three protected thiol groups for surface attachment. The redox-active molecules include ferrocene, zinc porphyrin, ferrocene-zinc porphyrin, magnesium phthalocyanine, and triple-decker lanthanide sandwich coordination compounds. The tripodal tether is based on a tris[4-(S-acetylthiomethyl)phenyl]-derivatized methane. Each redox-active unit is linked to the methane vertex by a 4,4'-diphenylethyne unit. The electrochemical characteristics of each compound were examined in solution and in SAMs on Au. Redox-kinetic measurements were also performed on the SAMs (with the exception of the magnesium phthalocyanine) to probe (1) the rate of electron transfer in the presence of an applied potential and (2) the rate of charge dissipation after the applied potential is disconnected. The electrochemical studies of the SAMs indicate that the tripodal tether provides a more robust anchor to the Au surface than does a tether with a single site of attachment. However, the electron-transfer and charge-dissipation characteristics of the two tethers are generally similar. These results suggest that the tripodal tether offers superior stability characteristics without sacrificing electrochemical performance.     

Synthesis of phenylethyne-linked porphyrin dyads

Four new porphyrin dyads have been prepared for studies in artificial photosynthesis. The two porphyrins are joined at the meso positions via a phenylethyne linker and are present in zinc/zinc or zinc/free base metalation states. The porphyrin bearing the ethynyl unit incorporates zero, one, or two pentafluorophenyl groups at non-linking meso positions for tuning the porphyrin redox potentials. The synthetic approach entailed Pd-mediated coupling of porphyrin building blocks that bear a single ethynylphenyl or bromo/iodo substituent.     

Swallowtail porphyrins: synthesis, characterization and incorporation into porphyrin dyads

The incorporation of symmetrically branched tridecyl ("swallowtail") substituents at the meso positions of porphyrins results in highly soluble building blocks. Synthetic routes have been investigated to obtain porphyrin building blocks bearing 1-4 swallowtail groups. Porphyrin dyads have been synthesized in which the zinc or free base (Fb) porphyrins are joined by a 4,4'-diphenylethyne linker and bear swallowtail (or n-pentyl) groups at the nonlinking meso positions. The swallowtail-substituted Zn(2)- and ZnFb-dyads are readily soluble in common organic solvents. Static absorption and fluorescence spectra and electrochemical data show that the presence of the swallowtail groups slightly raises the energy level of the filled a(2u)(pi) HOMO. EPR studies of the pi-cation radicals of the swallowtail porphyrins indicate that the torsional angle between the proton on the alkyl carbon and p-orbital on the meso carbon of the porphyrin is different from that of a porphyrin bearing linear pentyl groups. Regardless, the swallowtail substituents do not significantly affect the photophysical properties of the porphyrins or the electronic interactions between the porphyrins in the dyads. In particular, time-resolved spectroscopic studies indicate that facile excited-state energy transfer occurs in the ZnFb dyad, and EPR studies of the monocation radical of the Zn(2)-dyad show that interporphyrin ground-state hole transfer is rapid.     

Highly conjugated multiporphyrins: synthesis, spectroscopic and electrochemical properties

A series of meso-to-meso ethynyl-bridged multiporphyrin arrays have been synthesized using Sonogoshira palladium-catalyzed cross-coupling reactions involving the appropriate ethynylporphyrin and iodoporphyrin precursors. The absorption spectra of these multiporphyrins show splitting of the Soret bands and significant red shifts of the Q bands as compared to the combination of the corresponding components. These conjugated multiporphyrins also show red shifts in their emission spectra as the pi-conjugation is expanded. In the electrochemical measurements, the porphyrins dimer 7 shows two 1 - e- oxidations at E(1/2) = +0.63 and +0.76 V for the first electron abstraction from the two porphyrin rings, indicating electronic communication between the two porphyrin units. The porphyrin trimer 4 exhibits the first and second 1 - e- oxidations at E(1/2) = +0.68 and +0.77 V, respectively, which correspond to the two outer porphyrins. The cyclic voltammogram of pentamer 5 shows two overlapping 1 - e- couples at E(1/2) = +0.56 and +0.66 V, and one 2 - e- couple at E(1/2) = +0.86 V, for the four outer porphyrin units. These results demonstrate that in the porphyrin trimer and pentamer the individual peripheral porphyrin units are electrochemically coupled via a central porphyrin core. The UV-Vis-NIR spectra of the oxidized species of these multiporphyrins exhibit a broad intervalence charge transfer (IVCT) band in the region from 1200 to 3000 nm. The present work shows that a central porphyrin unit appended with ethynyl bridges affords strong electronic interactions between the peripheral porphyrin rings over a distance of about 15 A.     

One‐Pot Three‐Component Synthesis of Vicinal Diamines via In Situ Aminal Formation and Carboamination

A synthesis of vicinal diamines via in situ aminal formation and carboamination of allyl amines is reported. Employing highly electron‐poor trifluoromethyl aldimines in their stable hemiaminal form was key to enable both a fast and complete aminal formation as well as the palladium‐catalyzed carboamination step. The conditions developed allow the introduction of a wide variety of alkynyl, vinyl, aryl, and hetereoaryl groups with complete regioselectivity and high diastereoselectivity. The reaction exhibits a high functional‐group tolerance. Importantly, either nitrogen atom of the imidazolidine products can be selectively deprotected, while removal of the aminal tether can be achieved in a single step under mild conditions to reveal the free diamine. We expect that this work will promote the further use of mixed aminal tethers in organic synthesis.     

Noncovalent binding between fullerenes and protonated porphyrins in the gas phase

Noncovalent interactions between protonated porphyrin and fullerenes (C?? and C??) were studied with five different meso-substituted porphyrins in the gas phase. The protonated porphyrin-fullerene complexes were generated by electrospray ionization of the porphyrin-fullerene mixture in 3:1 dichloromethane/methanol containing formic acid. All singly protonated porphyrins formed the 1:1 complexes, whereas porphyrins doubly protonated on the porphine center yielded no complexes. The complex ion was mass-selected and then characterized by collision-induced dissociation with Xe. Collisional activation exclusively led to a loss of neutral fullerene, indicating noncovalent binding of fullerene to protonated porphyrin. In addition, the dissociation yield was measured as a function of collision energy, and the energy inducing 50% dissociation was determined as a measure of binding energy. Experimental results show that C?? binds to the protonated porphyrins more strongly than C??, and electron-donating substituents at the meso positions increase the fullerene binding energy, whereas electron-withdrawing substituents decrease it. To gain insight into π-π interactions between protonated porphyrin and fullerene, we calculated the proton affinity and HOMO and LUMO energies of porphyrin using Hartree-Fock and configuration interaction singles theory and obtained the binding energy of the protonated porphyrin-fullerene complex using density functional theory. Theory suggests that the protonated porphyrin-fullerene complex is stabilized by π-π interactions where the protonated porphyrin accepts π-electrons from fullerene, and porphyrins carrying bulky substituents prefer the end-on binding of C?? due to the steric hindrance, whereas those carrying less-bulky substituents favor the side-on binding of C??.     

Metal-molecule interactions upon deposition of copper overlayers on reactively functionalized porphyrin monolayers on Si(100)

The interaction of evaporated Cu deposited on a series of porphyrins in monolayers covalently attached to Si(100) substrates was investigated using cyclic voltammetry and FTIR spectroscopy. Each porphyrin contains a triallyl tripod attached to the porphyrin via a p-phenylene unit. The tripod anchors the porphyrin to the Si(100) substrate via hydrosilylation of the allyl groups. Two of the porphyrins are Zn chelates that possess meso p-cyanophenyl substituentsone, ZnP-CND, contains a single group opposite (distal) to the tripodal surface anchor, whereas the other, ZnP-CNL, contains two groups orthogonal (lateral) to the surface anchor. A third Zn porphyrin, ZnP, containing nonreactive p-tolyl groups at all three nonanchoring meso positions, was examined for comparison. The fourth porphyrin, FbP-HD, is a metal-free species (free base) that contains nonreactive phenyl (distal) and p-tolyl groups (lateral) at the three nonanchoring meso positions. The fifth porphyrin, CuP-HD, is the Cu chelate of FbP-HD, and serves as a reference complex for evaluating the effects of Cu metal deposition onto FbP-HD. The studies indicate that all of the porphyrin monolayers are robust under the conditions of Cu deposition, experiencing no noticeable degradation. In addition, the Cu metal does not penetrate through the monolayer to form electrically conductive filaments. For the ZnP-CND monolayers, the deposited Cu quantitatively reacts/complexes with the distal cyano group. In contrast, for the ZnP-CNL monolayers no reaction/complexation of the lateral cyano groups is observed. For the FbP-HD monolayers, Cu deposition results in quantitative insertion of Cu into the free base porphyrin. Collectively, the studies demonstrate that porphyrin monolayers are amenable to direct deposition of Cu overlayers and that functionalization of the porphyrins can be used to mediate the attributes of the metal-molecule junction.     

Porphyrins bearing arylphosphonic acid tethers for attachment to oxide surfaces

Synthetic molecules bearing phosphonic acid groups can be readily attached to oxide surfaces. As part of a program in molecular-based information storage, we have developed routes for the synthesis of diverse porphyrinic compounds bearing phenylphosphonic acid tethers. The routes enable (1) incorporation of masked phosphonic acid groups in precursors for use in the rational synthesis of porphyrinic compounds and (2) derivatization of porphyrins with masked phosphonic acid groups. The precursors include dipyrromethanes, monoacyldipyrromethanes, and diacyldipyrromethanes. The tert-butyl group has been used to mask the dihydroxyphosphoryl substituent. The di-tert-butyloxyphosphoryl unit is stable to the range of conditions employed in syntheses of porphyrins and multiporphyrin arrays yet can be deprotected under mild conditions (TMS-Cl/TEA or TMS-Br/TEA in refluxing CHCl(3)) that do not cause demetalation of zinc or magnesium porphyrins. The porphyrinic compounds that have been prepared include (1) A(3)B-, trans-AB(2)C-, and ABCD-porphyrins that bear a single phenylphosphonic acid group, (2) a trans-A(2)B(2)-porphyrin bearing two phenylphosphonic acid groups, (3) a chlorin that bears a single phenylphosphonic acid group, and (4) a porphyrin dyad bearing a single phenylphosphonic acid group. For selected porphyrin-phosphonic acids, the electrochemical characteristics have been investigated for molecules tethered to SiO(2) surfaces grown on doped Si. The voltammetric behavior indicates that the porphyrin-phosphonic acids form robust, electrically well-behaved monolayers on the oxide surface.     

Controlling conformations and physical properties of meso-tetrakis(phenylethynyl)porphyrins by ring fusion: synthesis, properties and structural characterizations

The boron trifluoride-catalyzed Rothemund condensations of phenylpropargylaldehyde with 4,7-dihydro-4,7-ethano-2H-isoindole or 3,4-diethylpyrrole in dichloromethane at low temperature give 5,10,15,20-tetrakis(phenylethynyl)porphyrins bearing bicyclo[2.2.2]octadiene and octaethyl substituents, respectively. The former undergoes a retro Diels-Alder reaction to afford 5,10,15,20-tetrakis(phenylethynyl)benzoporphyrin quantitatively. The different conformations of the porphyrin periphery were determined by X-ray diffraction and their redox and spectroscopic properties have been investigated.