Covalent microcontact printing of proteins for cell patterning

We describe a straightforward approach to the covalent immobilization of cytophilic proteins by microcontact printing, which can be used to pattern cells on substrates. Cytophilic proteins are printed in micropatterns on reactive self-assembled monolayers by using imine chemistry. An aldehyde-terminated monolayer on glass or on gold was obtained by the reaction between an amino-terminated monolayer and terephthaldialdehyde. The aldehyde monolayer was employed as a substrate for the direct microcontact printing of bioengineered, collagen-like proteins by using an oxidized poly(dimethylsiloxane) (PDMS) stamp. After immobilization of the proteins into adhesive "islands", the remaining areas were blocked with amino-poly(ethylene glycol), which forms a layer that is resistant to cell adhesion. Human malignant carcinoma (HeLa) cells were seeded and incubated onto the patterned substrate. It was found that these cells adhere to and spread selectively on the protein islands, and avoid the poly(ethylene glycol) (PEG) zones. These findings illustrate the importance of microcontact printing as a method for positioning proteins at surfaces and demonstrate the scope of controlled surface chemistry to direct cell adhesion.     

Chitosan-N-poly(ethylene oxide) brush polymers for reduced nonspecific protein adsorption

The possibility of using a novel comb polymer consisting of a chitosan backbone with grafted 44 units long poly(ethylene oxide) side chains for reducing nonspecific protein adsorption to gold surfaces functionalized by COOH-terminated thiols has been explored. The comb polymer was attached to the surface in three different ways: by solution adsorption, covalent coupling, and microcontact printing. The protein repellent properties were tested by monitoring the adsorption of bovine serum albumin and fibrinogen employing surface plasmon resonance and imaging null ellipsometry. It was found that a significant reduction in protein adsorption is achieved as the comb polymer layer is sufficiently dense. For solution adsorption this was achieved by adsorption from high pH solutions. On the other hand, the best performance of the microcontact printed surfaces was obtained when the stamp was inked either at low or at high pH. For a given comb polymer layer thickness/poly(ethylene oxide) density, significant differences in protein repellent properties were observed between the different preparation methods, and it is suggested that a reduction in the mobility of the comb polymer layer generated by covalent attachment favors a reduced protein adsorption.     

A Simple Method for Fabricating Patterned Curvilinear Microstructures in Poly(dimethylsiloxane) by Selective Wetting

The fabrication of patterned microstructures in poly(dimethylsiloxane) (PDMS) is a prerequisite for soft lithography. Herein, curvilinear surface relief microstructures in PDMS are fabricated through a simple three‐stage approach combining microcontact printing (μCP), selective surface wetting/dewetting and replica molding (REM). First, using an original PDMS stamp (first‐generation stamp) with linear relief features, a chemical pattern on gold substrate is generated by μCP using hexadecanethiol (HDT) as an ink. Then, by a dip‐coating process, an ordered polyethylene glycol (PEG) polymer‐dot array forms on the HDT‐patterned gold substrate. Finally, based on a REM process, the PEG‐dot array on gold substrate is used to fabricate a second‐generation PDMS stamp with microcavity array, and the second‐generation PDMS stamp is used to generate third‐generation PDMS stamp with microbump array. These fabricated new‐generation stamps are utilized in μCP and in micromolding in capillaries (MIMIC), allowing the generation of surface micropatterns which cannot be obtained using the original PDMS stamp. The method will be useful in producing new‐generation PDMS stamps, especially for those who want to use soft lithography in their studies but have no access to the microfabrication facilities.     

Positive microcontact printing with mercaptoalkyloligo(ethylene glycol)s

The soft lithographic replication of patterns with a low filling ratio by microcontact printing (microCP) is problematic due to the poor mechanical stability of common elastomeric stamps. A recently described strategy to avoid this problem employs a modified patterning method, positive microcontact printing ((+)microCP), in which a stamp with a mechanically more stable inverted relief pattern is used. In contrast to conventional negative microCP ((-)microCP), in the contact areas a self-assembled monolayer (SAM) is printed of a "positive ink", which provides only minor etch protection, whereas the noncontacted areas are subsequently covered with a different, etch-resistant SAM, prior to development by chemical etching. With the aim to identify novel, highly versatile positive inks, the patterning of gold by (+)microCP with mercaptoalkyloligo(ethylene glycol)s (MAOEGs), the subsequent adsorption of octadecanethiol (ODT), and the final development by wet chemical etching have now been studied. A polydisperse mixture of mercaptoundecylocta(ethylene glycol) derivatives was found to provide the best patterning results. The surface spreading of the positive ink during stamping, the exchange of printed MAOEGs with ODT, and the choice of the right etching bath were identified as key parameters that influence the achievable pattern resolution and contrast. Due to the modular composition of functionalized alkyloligo(ethylene glycol) derivatives, (+)microCP with these positive inks has the potential for easy adaptation to a variety of materials and development conditions.     

Printing biomacromolecules on a bovine serum albumin precursor layer

Various biomacromolecules including proteins and polysaccharides are printed on a substrate capped with a bovine serum albumin (BSA) precursor layer to create clear co-patterns of these molecules. Characterizations by confocal laser scanning microscopy (CLSM) and atomic force microscopy (AFM) demonstrate the successful production and clear boundaries of the co-patterns. Rinsing the BSA-adsorbed substrate and the biomacromolecules-inked stamp before microcontact printing (microCP) is crucial for the creation of clear and stable co-patterns. The patterns are mainly stabilized by electrostatic interactions and van der Waals forces. Characterizations by ellipsometry, UV-Vis and fluorescence spectroscopy reveal that printing by a flat PDMS stamp yields a denser layered structure of proteins with a higher amount than that of adsorbed proteins. By printing, however, a lower enzymatic catalytic activity for horseradish peroxidase (HRP) or binding capability for avidin (both normalized to amount) is determined. A conformational transition from alpha-helix to beta-sheet of HRP is observed by ATR-IR. By contrast, a BSA precursor layer can effectively improve the functionality of the printed HRP or avidin and preserve the original conformation of the proteins, although the absolute transferred amount of these proteins is decreased.     

A method of printing uniform protein lines by using flat PDMS stamps

In this paper, we report a method of printing uniform protein lines on glass slides by using UV-treated flat PDMS stamps. Unlike traditional microcontact printing (μCP) which requires microstructured PDMS stamps, this μCP method only requires a flat PDMS stamp, an UV lamp and a number of straight needles. Our results show that lines of bovine serum albumin (BSA), immunoglobin (IgG), anti-biotin, anti-human IgG and anti-mouse IgG can be printed evenly on glass slides by using this μCP method. We also demonstrate that the printed protein lines are suitable for applications such as microfluidic immunoassays.     

Dendrimer-mediated transfer printing of DNA and RNA microarrays

This paper describes a new method to replicate DNA and RNA microarrays. The technique, which facilitates positioning of DNA and RNA with submicron edge resolution by microcontact printing (muCP), is based on the modification of poly(dimethylsiloxane) (PDMS) stamps with dendrimers ("dendri-stamps"). The modification of PDMS stamps with generation 5 poly(propylene imine) dendrimers (G5-PPI) gives a high density of positive charge on the stamp surface that can attract negatively charged oligonucleotides in a "layer-by-layer" arrangement. DNA as well as RNA is transfer printed from the stamp to a target surface. Imine chemistry is applied to immobilize amino-modified DNA and RNA molecules to an aldehyde-terminated substrate. The labile imine bond is reduced to a stable secondary amine bond, forming a robust connection between the polynucleotide strand and the solid support. Microcontact printed oligonucleotides are distributed homogeneously within the patterned area and available for hybridization. By using a robotic spotting system, an array of hundreds of oligonucleotide spots is deposited on the surface of a flat, dendrimer-modified stamp that is subsequently used for repeated replication of the entire microarray by microcontact printing. The printed microarrays are characterized by homogeneous probe density and regular spot morphology.     

Diffusion of alkanethiols in PDMS and its implications on microcontact printing (muCP)

n-Alkanethiols HS-(CH2)n-CH3 such as hexadecanethiol (HDT, n = 15), octadecanethiol (ODT, n = 17), and eicosanethiol (ECT, n = 19) have been shown to provide highly protective etch resists on microcontact-printed noble metals. As the quality of the printed pattern strongly depends on the mobility of the ink compound, we focused on understanding the diffusion behavior of HDT, ODT, and ECT in poly(dimethylsiloxane) (PDMS) stamps. We used a commercial PDMS material (Sylgard184), which is commonly used for microcontact printing (muCP), and a custom-synthesized one with a higher modulus. On the basis of linear-diffusion experiments, which maintained realistic printing conditions, we showed that the ink transport in the stamp follows Fick's law of diffusion. We then determined the diffusion coefficient by analytical and numerical modeling of the diffusion experiments. Numerical calculations were carried out with the finite-difference method applying more realistic boundary conditions (ink adsorption). Values for the diffusion coefficients of the three ink compounds in the two different PDMS materials all are on the order of (4-7) x 10(-7) cm2 s(-1). The scope and limits of the mathematical models are discussed. To demonstrate the potential of such models for microcontact printing, we simulate multiple printing cycles of an inked stamp and compare the results with experimental data.     

Self-supporting hydrogel stamps for the microcontact printing of proteins

In this work we explore a new hydrogel stamp material obtained from polymerizing 2-hydroxyethyl acrylate and poly(ethylene glycol) diacrylate in the presence of water for the microcontact printing of proteins directly on gold substrates and by covalent coupling to self-assembled monolayers of alkanethiols. At high cross-link density, the hydrogel is rigid, hydrophilic, and with a high buffer holding capacity to enable the unsupported printing of protein patterns homogeneously and reproducibly, with micrometer-range precision. The stamps were used to print antibodies to human parathyroid hormone, which were shown using immunoassay tests to retain their biological function with binding capacities comparable to those of solution-adsorbed antibodies.     

Ab initio modeling of amide-stabilized, oligo(ethylene glycol)-terminated self-assemblies: in-SAM molecular geometry, orientation, and hydrogen bonding

Under the constraint that sulfur atoms form a hexagonal (square root 3 x square root 3)R30 degrees overlayer on the (111) gold surface, the optimized geometry of periodic arrays of HS(CH2)3CONH-(CH2CH2O)3H molecules has been found ab initio, by exploiting the BP86 exchange-correlation functional with 6-31G and "general" basis sets. The obtained data suggests that several prominent features of in-SAM molecular geometry and orientation stand out from conclusions based on single-molecule modeling. In particular, changing of amide-related dihedrals is shown to dominate in adjustment of molecular constituents to the assembly environment and to result in a substantial shortening of the hydrogen bond distance between nearest-neighbor amides. First demonstrated here, the full account to the intermolecular interaction within periodic arrays of amide-bridged, oligo(ethylene glycol)-terminated alkanethiolates forms a new platform for arguable modeling of SAM apparent properties.     

Transferring complementary target DNA from aqueous solutions onto solid surfaces by using affinity microcontact printing

In this paper, we report a method of transferring complementary target DNA from an aqueous solution onto a solid surface by using affinity microcontact printing. In this approach, the probe DNA is first immobilized on the surface of an aminated poly(dimethylsiloxane) (PDMS) stamp. After a complementary target DNA hybridizes with the probe DNA on the stamp surface, the PDMS stamp is printed on an aminated glass slide. By using fluorescent microscopy, we show that only complementary target DNA, but not noncomplementary DNA, can be captured onto the surface of the stamp and then transferred to the aminated glass slide. The transfer of DNA can be attributed to the stronger electrostatic attraction between DNA and amine groups compared to the hydrogen bonds between the hybridized DNA molecules. We also investigate several factors that may influence the transfer of DNA, such as the surface density of amine groups, hybridization conditions, and contamination from unreacted PDMS monomers.     

Micro-Scale Cell Patterning on Nonfouling Plasma Polymerized Tetraglyme Coatings by Protein Microcontact Printing

Nonfouling thin films were prepared by the plasma deposition of tetraethylene glycol dimethyl ether (pp4G) on fluorinated ethylene propylene polymer (FEP) and glass substrates. Ordered cell patterns were created on these surfaces by microcontact printing of proteins. Pp4G was found to be stable in aqueous environments and resistant to an ethanol sterilization procedure, as verified by surface analysis. Pp4G also reduced nonspecific protein adsorption by more than 65-fold before and after sterilization. Despite the low adsorption of proteins to pp4G in solution, protein microcontact printing was achieved and we were able to print laminin, an adhesive extracellular matrix protein, from an elastomeric stamp onto pp4G. The printed laminin supported the attachment and spreading of cardiomyocytes and the nonprinted pp4G regions remained cell repulsive in culture conditions. Microscale patterns of cardiomyocytes were maintained on printed pp4G for more than 7 days. This cell patterning process should be viable for other cell types. The potential applications include tissue engineering and microdevices for biosensor, diagnostic, and pharmacological applications.     

Creating patterned carbon nanotube catalysts through the microcontact printing of block copolymer micellar thin films

We report a route for synthesizing patterned carbon nanotube (CNT) catalysts through the microcontact printing of iron-loaded poly(styrene-block-acrylic acid) (PS-b-PAA) micellar solutions onto silicon wafers coated with thin aluminum oxide (Al(2)O(3)) layers. The amphiphilic block copolymer, PS-b-PAA, forms spherical micelles in toluene that can form quasi-hexagonal arrays of spherical PAA domains within a PS matrix when deposited onto a substrate. In this report, we dip a poly(dimethylsiloxane) (PDMS) molded stamp into an iron-loaded micellar solution to create a thin film on the PDMS features. The PDMS stamp is then put in contact with a substrate, and uniaxial compressive stress is applied to transfer the micellar thin film from the PDMS stamp onto the substrate in a defined pattern. The polymer is then removed by oxygen plasma etching to leave a patterned iron oxide nanocluster array on the substrate. Using these catalysts, we achieve patterned vertical growth of multiwalled CNTs, where the CNTs maintain the fidelity of the patterned catalyst, forming high-aspect-ratio standing structures.     

Direct printing of self-assembled lipid tubules on substrates

Lipid tubules formed by rolled-up bilayer sheets have shown promise in drug delivery systems, nanofluidics, and microelectronics. Here we report a method for directly printing lipid tubules on substrates. Preformed lipid tubules of 1,2-bis(tricosa-10,12-diynoyl)-sn-glycero-3-phosphocholine are aligned in the recessed channels of a thin poly(dimethylsiloxane) (PDMS) stamp. The aligned lipid tubules then serve as an "ink" for microcontact printing. We demonstrate that two-dimensional (2-D) arrays of aligned lipid tubules can be transferred onto planar, patterned, and curved substrates from the recessed channels of the PDMS stamp by bringing the tubule-inked PDMS stamp into contact with these substrates. We show that the 2-D array of aligned lipid tubules can be transcribed into a 2-D array of aligned silica cylinders through templated sol-gel condensation of tetraethoxysilane.     

Protein adsorption on oligo(ethylene glycol)-terminated alkanethiolate self-assembled monolayers: The molecular basis for nonfouling behavior

A study of protein resistance of oligo(ethylene glycol) (OEG), HS(CH2)11(OCH2CH2)nOH (n = 2, 4, and 6), self-assembled monolayers (SAMs) on Au(111) surfaces is presented here. Hydroxyl-terminated OEG-SAMs are chosen to avoid the hydrophobic effect observed with methyl-terminated OEG-SAMs, particularly at high packing densities. The structure of the OEG-SAM surfaces is controlled by adjusting the assembly solvent. These SAMs were characterized by X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). Protein adsorption on these surfaces was investigated by surface plasmon resonance (SPR). OEG-SAMs assembled from mixed ethanol and water solutions show higher packing density on gold than those from pure ethanol solution. For EG2OH- and EG4OH-SAMs, proteins (i.e., fibrinogen and lysozyme) adsorb more on the densely packed SAMs prepared from mixed ethanol and water solutions, while EG6OH-SAMs generally resist protein adsorption regardless of the assembly solvent used.     

Hydrophilic elastomers for microcontact printing of polar inks

A moderately hydrophilic, thermoplastic elastomer (poly(ether-ester)) was investigated as a stamp material for microcontact printing of a polar ink: pentaerythritol-tetrakis-(3-mercaptopropionate). Stamps with a relief structure were produced from this polymer by hot embossing, and a comparison was made with conventional poly(dimethylsiloxane) (PDMS) and oxygen-plasma-treated PDMS. It is shown that the hydrophilic stamps can be used for the repetitive printing (without re-inking) of at least 10 consecutive patterns, which preserve their etch resistance, and this in rather sharp contrast to conventional and oxygen plasma-treated PDMS stamps. It is argued that these enhanced printing characteristics of the hydrophilic stamps originate from an improved wetting and solubility of polar inks in the hydrophilic stamp.     

Interface interaction controlled transport of CdTe nanoparticles in the microcontact printing process

High-quality CdTe nanoparticles stabilized with thioglycolic acid (TGA) are patterned on SiO2/Si surfaces using microcontact printing (microCP). Due to the weak interaction of the nanoparticles with the stamp surface, tailoring of gas flow rate during the inking process as well as the type and scale of the patterns on the stamp are used to control the distribution of the nanoparticles on the structured stamp surface. This distribution is then transferred the printed regions. Either edge printing or homogeneous printing can be achieved under optimized conditions. In addition, new structures such as nanowires form under certain conditions.     

Bifunctional, chemically patterned flat stamps for microcontact printing of polar inks

Different methods to create chemically patterned, flat PDMS stamps with two different chemical functionalities were compared. The best method for making such stamps, functionalized with 1H,1H,2H,2H-perfluorodecyltrichlorosilane (PFDTS) and 3-(aminopropyl)triethoxysilane (APTS), appeared to be full functionalization of a freshly oxidized flat PDMS stamp with either adsorbate, followed by renewed oxidation through a mask and attachment of the other adsorbate. These stamps were used to transfer polar inks (a thioether-functionalized dendrimer and a fluorescent dye) by microcontact printing. The PFDTS monolayer was used as a barrier against ink transfer, while the APTS SAM areas functioned as an ink reservoir for polar inks. The printing results confirmed the excellent transfer of hydrophilic inks with these stamps to gold and glass substrates, even from aqueous solutions. Attachment of a fluorescent dye on the amino-functionalized regions shows the possibility of the further modification of the chemically patterned stamps for tailoring of the stamps' properties.     

Single etch patterning of stacked silver and molybdenum alloy layers on glass using microcontact wave printing

Stacked thin layers of silver alloy (AgPdCu) and MoCr layers on 10 x 15 cm2 glass substrates were patterned by microcontact wave printing and etching. Patterns of etch-resistant octadecanethiol self-assembled monolayers (SAMs) were wave printed with regular backplane stabilized PDMS stamps. Pattern development was achieved by etching both metal layers in a single step, employing a nitric acid-based etching bath. Trifluoroacetic acid and a nitrite salt were identified as essential bath components for a homogeneous etching process. Etch defects could be eliminated by the addition of a decanesulfonate, which stabilizes the SAM resist via a defect healing mechanism.     

Tunable micropatterned substrates based on poly(dopamine) deposition via microcontact printing

A simple technique was developed to fabricate tunable micropatterned substrates based on mussel-inspired surface modification. Polydopamine (PDA) was developed on polydimethylsiloxane (PDMS) stamps and was easily imprinted to several substrates such as glass, silicon, gold, polystyrene, and poly(ethylene glycol) via microcontact printing. The imprinted PDA retained its unique reactivity and could modulate the chemical properties of micropatterns via secondary reactions, which was illustrated in this study. PDA patterns imprinted onto a cytophobic and nonfouling substrates were used to form patterns of cells or proteins. PDA imprints reacted with nucleophilic amines or thiols to conjugate molecules such as poly(ethylene glycol) for creating nonfouling area. Gold nanoparticles were immobilized onto PDA-stamped area. The reductive ability of PDA transformed silver ions to elemental metals as an electroless process of metallization. This facile and economic technique provides a powerful tool for development of a functional patterned substrate for various applications.