Electron impact ionization of CCl4 and SF6 embedded in superfluid helium droplets

Electron impact ionization of helium nano-droplets containing several 10⁴ He atoms and doped with CCl₄ or SF₆ molecules is studied with high-mass resolution. The mass spectra show significant clustering of CCl₄ molecules, less so for SF₆ under our experimental conditions. Positive ion efficiency curves as a function of electron energy indicate complete immersion of the molecules inside the helium droplets in both cases. For CCl₄ we observe the molecular parent cation CCl₄⁺ that preferentially is formed via Penning ionization upon collisions with He*. In contrast, no parent cation SF₆⁺ is seen for He droplets doped with SF₆. The fragmentation patterns for both molecules embedded in He are compared with gas phase studies. Ionization via electron transfer to He⁺ forms highly excited ions that cannot be stabilized by the surrounding He droplet. Besides the atomic fragments F⁺ and Cl⁺ several molecular fragment cations are observed with He atoms attached.     

Peculiarity of the Dickinson H 2 + wave function

According to the zero potential energy criterion proposed recently, the Dickinson wave function for the 2p_u state of the H ₂ ⁺ system is an unexpectedly poor approximation so long as the known parameters are employed. We re-examine the optimum parameters for the Dickinson wave function and find that there exist two sets of optimum parameters with different wave function characteristics. The corresponding energy curves cross at R= 1.91 a.u., though the difference is very small. We suggest that a new set of optimum parameters with slightly higher energy for R>1.91 a.u. is more acceptable physically than the previously reported set.     

Cr2(WO4)3和Cr2(MoO4)3的负热膨胀特性研究

用液相反应-前驱物烧结法制备了Cr₂(WO₄)₃和Cr₂(MoO₄)₃粉体。298～1 073 K的原位粉末X射线衍射数据表明Cr₂(WO₄)₃和Cr₂(MoO₄)₃的晶胞体积随温度的升高而增大, 本征线热膨胀系数分别为(1.274±0.003)×10^-6 K^-1和(1.612±0.003)×10^-6 K^-1。用热膨胀仪研究了Cr₂(WO₄)₃和Cr₂(MoO₄)₃在静态空气中298～1 073 K范围内热膨胀行为，即开始表现为正热膨胀，随后在相转变点达到最大值，最后表现为负热膨胀，其负热膨胀系数分别为(-7.033±0.014)×10^-6 K^-1和(-9.282±0.019)×10^-6 K^-1。     

A new promising phosphor, Na3La2(BO3)3:Ln (Ln=Eu, Tb)

We present an efficient way to search a host for ultraviolet (UV) phosphor from UV nonlinear optical (NLO) materials. With the guidance, Na₃La₂(BO₃)₃ (NLBO), as a promising NLO material with a broad transparency range and high damage threshold, was adopted as a host material for the first time. The lanthanide ions (Tb³⁺ and Eu³⁺)-doped NLBO phosphors have been synthesized by solid-state reaction. Luminescent properties of the Ln-doped (Ln=Tb³⁺, Eu³⁺) sodium lanthanum borate were investigated under UV ray excitation. The emission spectrum was employed to probe the local environments of Eu³⁺ ions in NLBO crystal. For red phosphor, NLBO:Eu, the measured dominating emission peak was at 613 nm, which is attributed to ⁵D₀-⁷F₂ transition of Eu³⁺. The luminescence indicates that the local symmetry of Eu³⁺ in NLBO crystal lattice has no inversion center. Optimum Eu³⁺ concentration of NLBO:Eu³⁺ under UV excitation with 395 nm wavelength is about 30 mol%. The green phosphor, NLBO:Tb, showed bright green emission at 543 with 252 nm excited light. The measured concentration quenching curve demonstrated that the maximum concentration of Tb³⁺ in NLBO was about 20%. The luminescence mechanism of Ln-doped NLBO (Tb³⁺ and Eu³⁺) was analyzed. The relative high quenching concentration was also discussed.     

Structures,stabilities and adiabatic ionization and electron affinity energies of small sulfur clustersS 3-S 5

Summary The vertical and adiabatic ionization and electron affinity energies are calculated for the isomers ofS ₃,S ₄ andS ₅. For the existing isomers the structures of several ionic states were optimized using an RHF analytical gradient approach with a subsequent frequency analysis. The many-body effects were taken into account by Green function (for vertical energies) and CI (for vertical and adiabatic energies) techniques. The structural relaxation upon ionization or attachment of an electron is found to be of primary importance to account for the sequence of cationic states or the existence of a positive electron affinity.Dedicated to Professor W. Kutzelnigg on the occasion of his 60th birthday.     

SO42-改性后的TiO2(锐钛和/或金红石)表面上MoO3的分散性质研究

采用红外(IR)、拉曼(Raman)、X-射线衍射(XRD)、程序升温还原(TPR)等方法考察了经硫酸根改性后的金红石(SR)与锐钛矿(SA)的混合比例变化时的负载型催化剂，MoO₃ / TiO₂(SR+SA)，的一些物理化学性质(如活性组分MoO₃的分散行为、表面酸碱性、氧化还原性)的变化规律。结果表明：对于MoO₃ / TiO₂(SR+SA)样品，低含量MoO₃表面分散时倾向于优先与混合载体中的改性金红石(SR)发生作用；TiO₂载体表面SO₄^2-的存在，使得载体表面产生了新的酸性位，导致样品中表面分散的钼物种主要以聚合八面体状态存在。     

CEPA calculations on open-shell molecules. III. Potential curves for the six lowest excited states of He2 in the vicinity of their equilibrium distances

CEPA-PNO and PNO-CI calculations have been performed for the potential energy curves of the He ₂ ⁺ ground state and the six lowest excited states of He₂ in the range of 1.4 a₀ ≤R ≤ 3.5 a₀. The calculated equilibrium distances as well as the spectroscopic constants are in very good agreement with molecular constants as derived experimentally from the rotation-vibration spectrum of He₂ by Ginter, except for thec ³∑ _g ⁺ state. This latter discrepancy is probably due to an “obligatory” hump in thec ³∑ _g ⁺ state occurring at 3.5 a₀ which cannot be properly treated in our calculation. The relative energetic positions of the six lowest states and their ionization energies are reproduced by our calculations with an accuracy of 0–400 cm⁻¹. Extrapolation of our results to infinite basis sets leads to estimates of the dissociation energies of He₂ excited states which cannot be measured spectroscopically because of the humps in all these states.     

A theoretical study on the ionization of tetrafluoroethylene with analysis of vibrational structure of the photoelectron spectra

Ab initio calculations have been performed to study on the molecular structures and the vibrational levels of the low-lying ionic states (²B_2u,²A_g,²B_2g,²B_3u,²A_u,²B_1g,²B_1u, and²B_3g) of tetrafluoroethylene. The equilibrium molecular structures and vibrational modes of these states are presented. The theoretical ionization intensity curves including the vibrational structures of the low-lying eight ionic states are also presented and compared with the photoelectron spectrum. Some new assignments of the photoelectron spectra are proposed.     

Electron impact study of C6H5+ fragment ion obtained from three molecules

C₆H₅ ⁺ fragment ion produced from toluene,n-propylbenzene and acetophenone have been studied using an electron impact technique. The ionization efficiency data have been treated by the inverse convolution first differential technique. First and higher appearance energies for ions produced from the three precursors are reported. The heats of formation for the ions obtained at threshold from the three molecules are calculated     

Optimizing Adsorption of 17α-Ethinylestradiol from Water by Magnetic MXene Using Response Surface Methodology and Adsorption Kinetics,Isotherm, and Thermodynamics Studies

Magnetic MXene composite Fe₃O₄@Ti₃C₂ was successfully prepared and employed as 17α-ethinylestradiol (EE2) adsorbent from water solution. The response surface methodology was employed to investigate the interactive effects of adsorption parameters (adsorption time, pH of the solution, initial concentration, and the adsorbent dose) and optimize these parameters for obtaining maximum adsorption efficiency of EE2. The significance of independent variables and their interactions were tested by the analysis of variance (ANOVA) and t-test statistics. Optimization of the process variables for maximum adsorption of EE2 by Fe₃O₄@Ti₃C₂ was performed using the quadratic model. The model predicted maximum adsorption of 97.08% under the optimum conditions of the independent variables (adsorption time 6.7 h, pH of the solution 6.4, initial EE2 concentration 0.98 mg L⁻¹, and the adsorbent dose 88.9 mg L⁻¹) was very close to the experimental value (95.34%). pH showed the highest level of significance with the percent contribution (63.86%) as compared to other factors. The interactive influences of pH and initial concentration on EE2 adsorption efficiency were significant (p < 0.05). The goodness of fit of the model was checked by the coefficient of determination (R²) between the experimental and predicted values of the response variable. The response surface methodology successfully reflects the impact of various factors and optimized the process variables for EE2 adsorption. The kinetic adsorption data for EE2 fitted well with a pseudo-second-order model, while the equilibrium data followed Langmuir isotherms. Thermodynamic analysis indicated that the adsorption was a spontaneous and endothermic process. Therefore, Fe₃O₄@Ti₃C₂ composite present the outstanding capacity to be employed in the remediation of EE2 contaminated wastewaters.     

Bi2WO6/TiO2纳米管异质结构复合材料的多模式下的光催化活性比较

以TiO₂纳米管为模板,采用多组分自组装结合水热法制备Bi₂WO₆/TiO₂纳米管异质结构复合材料。通过多种技术如X射线衍射（XRD）,X射线光电子能谱（XPS）,N₂吸附-脱附,扫描电镜（SEM）,高分辨透射电镜（HRTEM）和紫外可见漫反射吸收光谱（UV-Vis DRS）考察所制备样品的组成、结构、形貌、光吸收和电子性质。Bi₂WO₆纳米片或纳米粒子分布在TiO₂纳米管上,形成异质结构。随后,通过在紫外、可见和微波辅助光催化模式下降解染料罗丹明B（RhB）来评价复合催化剂的光催化活性。与TiO₂纳米管和Bi₂WO₆相比,Bi₂WO₆/TiO₂-35纳米管在多模式下表现出更优异的光催化活性。与紫外和可见降解模式相比,Bi₂WO₆/TiO₂-35纳米管在微波辅助光催化模式下对RhB的降解效率最高。这种增强的光催化活性源于适量Bi₂WO₆的引入、纳米管独特的形貌特征和降解模式所引起的增强的量子效率。降解过程中的活性物种被证明是h⁺,·OH和·O₂^-自由基。而且,在微波辅助光催化模式下,可产生更多的·OH和·O₂^-自由基。     

Sol-gel synthesis of K3InF6 and structural characterization of K2InC10O10H6F9, K3InC12O14H4F18 and K3InC12O12F18

K₃InF₆ is synthesized by a sol-gel route starting from indium and potassium acetates dissolved in isopropanol in the stoichiometry 1:3, with trifluoroacetic acid as fluorinating agent. The crystal structures of the organic precursors were solved by X-ray diffraction methods on single crystals. Three organic compounds were isolated and identified: K₂InC₁₀O₁₀H₆F₉, K₃InC₁₂O₁₄H₄F₁₈ and K₃InC₁₂O₁₂F₁₈. The first one, deficient in potassium in comparison with the initial stoichiometry, is unstable. In its crystal structure, acetate as well as trifluoroacetate anions are coordinated to the indium atom. The two other precursors are obtained, respectively, by quick and slow evaporation of the solution. They correspond to the final organic compounds, which give K₃InF₆ by decomposition at high temperature. The crystal structure of K₃InC₁₂O₁₄H₄F₁₈ is characterized by complex anions [In(CF₃COO)₄(OH_x)₂]^(5−2x)− and isolated [CF₃COOH_2−x]^(x−1)− molecules with x=2 or 1, surrounded by K⁺ cations. The crystal structure of K₃InC₁₂O₁₂F₁₈ is only constituted by complex anions [In(CF₃COO)₆]³⁻ and K⁺ cations. For all these compounds, potassium cations ensure only the electroneutrality of the structure. IR spectra of K₂InC₁₀O₁₀H₆F₉ and K₃InC₁₂O₁₂F₁₈ were also performed at room temperature on pulverized crystals.     

Cu2O/g-C3N4催化合成吲哚-2-羧酸酯

我们通过原位还原的方法将吸附在g-C3N4表面上Cu2+还原,制备出Cu2O/g-C3N4复合材料,并利用XRD、SEM、FT-IR、XPS等分析手段表征Cu2O/g-C3N4.表征结果显示:Cu元素主要以Cu2O的形式吸附在g-C3N4载体上.另外,还考察了Cu2O/g-C3 N4在“一锅法”合成吲哚-2-甲酸乙酯的反应中的催化性能.结果表明:即使在较低的催化担载量和温和的反应条件下,Cu2O/g-C3 N4仍能表现出良好的催化性能并获得44.1％的收率.     

Study on the atmospheric photochemical reaction of CF3 radicals using ultraviolet photoelectron and photoionization mass spectrometer

A study of the atmospheric photochemical reaction of CF₃ radical with CO and O₂ was performed by using a homemade ultraviolet photoelectron spectrometer-photoionization mass spectrometer (PES-PIMS). The electronic structures and mechanism of ionization and dissociation of CF₃OC(O)OOC(O)-OCF₃ were investigated. It was indicated that the two bands on the photoelectron spectrum of CF₃OC(O)OOC(O)OCF₃ are the result of ionization of an electron from a lone pair of oxygen and a fluorine lone pair of CF₃ group. The outermost electrons reside in the oxygen lone pair. The experimental and theoretical first vertical ionization energy is 13.21 and 13.178 eV, respectively, with the PES and OVGF method. They are in good agreement. The photo ionization and dissociation processes were discussed with the help of theoretical calculations and PES-PIMS experiment. After ionization, the parent ions prefer the dissociation of the C—O bond and giving the fragments CF₃OCO⁺ and CF₃⁺. It demonstrated that the ultraviolet photoelectron and photoionization mass spectrometer could be applied widely in the study of atmospheric photochemical reaction. Supported by the Knowledge Innovation Program of the Chinese Academy of Sciences (Grant No. KZCX2-YW-205), Hundred Talents Fund, 973 Program of Ministry of Science and Technology of China (Grant No. 2006CB403701) and the National Natural Science Foundation of China (Grant Nos. 20577052, 20673123)     

Ab initio and density functional theory study of the enthalpies of formation of F2SOx and FClSOx (x=1, 2)

Enthalpies of formation of F₂SO, F₂SO₂, FClSO and FClSO₂ molecules have been determined using ab initio molecular orbital theory and density functional theory (DFT) calculations. Different DFT approaches and levels of the Gaussian-3 and the complete basis set (CBS) ab initio model chemistries have been employed to calculate enthalpies of formation from both total atomization energies and isodesmic reaction schemes. The best values at 298 K for F₂SO, F₂SO₂, FClSO and FClSO₂ as derived from an average of G3, G3B3, CBS-Q and CBS-QB3 isodesmic energies are −140.6, −181.1, −92.6 and −132.3 kcal mol⁻¹, respectively. The results obtained suggest that the accumulated small component errors found in the DFT-based methods are significantly reduced at the ab initio levels employed. Structural properties, harmonic vibrational frequencies, mode assignations and infrared intensities derived from B3LYP and mPW1PW91 functional with the 6-311+G(3df) basis set are presented.     

A structure, conductivity and dielectric properties investigation of A3CoNb2O9 (A=Ca, Sr, Ba) triple perovskites

The room temperature structures as well as the temperature-dependent conductivity and dielectric properties of the A₃CoNb₂O₉ (A=Ca²⁺, Sr²⁺ and Ba²⁺) triple perovskites have been carefully investigated. A constrained modulation wave approach to Rietveld structure refinement is used to determine their room temperature crystal structures. Correlations between these crystal structures and their physical properties are found. All three compounds undergo insulator to semiconductor phase transitions as a function of increasing temperature. The hexagonal Ba₃CoNb₂O₉ compound acts as an insulator at room temperature, while the monoclinic Ca₃CoNb₂O₉ compound is already a semiconductor at room temperature. The measured dielectric frequency characteristics of the A=Ba compound are excellent.     

Synthesis of Δ-15-deoxy-PG-J1 methyl ester and epi-Δ-15-deoxy-PG-J1

The synthesis of racemic Δ^12,14-15-deoxy-PG-J₁ is readily achieved in six steps employing as the key transformation a one-pot conjugate addition-Peterson olefination sequence using exo-2-trimethylsilyl-3a,4,7,7a-tetrahydro-4,7-methanoinden-1-one. Additionally a Noyori-type three-component coupling approach is employed for the synthesis of enantioenriched epi-Δ¹²-15-deoxy-PG-J₁ from 4(S)-tert-butyldimethylsilyloxycyclopent-2-enone.     

硅酸盐对Ferrihydrite相转化为α-Fe2O3微粒形貌的调控作用

以Ferrihydrite(又称水合氧化铁hydrous iron oxide)为反应前驱物, Fe(II)为催化剂, 在微量Na₂SiO₃存在下, 控制pH＝6～9范围内合成出了亚微米级纺锤形和准立方形α-Fe₂O₃微粒. 研究了初始pH, Na₂SiO₃浓度, Ferrihydrite老化方式对相转化时间和产物形貌的影响, 利用XRD, SEM等手段对产物进行了表征. 结果表明, Na₂SiO₃对Ferriihydrite催化相转化有一定的抑制作用, 是影响其相转化过程及产物形貌的关键. 在弱碱性条件下, [Si]/[Fe^3＋]为0.01时可直接获得纺锤形(轴比≥2)或准立方形(300～400 nm) α-Fe₂O₃粒子, 并对形成机理进行了初步讨论.     

流变相法合成LiNi0.85Co0.15O2的结构与电化学性能

以一种新型的软化学方法——流变相法, 成功地合成了锂离子电池正极材料LiNi_0.85Co_0.15O₂. 将在600～850 ℃氧气氛下处理6 h后得到的LiNi_1－yCo_yO₂ (y＝0.10, 0.15, 0.20, 0.25), 进行X射线粉末衍射(XRD)与电化学测试. 测试结果表明, 流变相前体经过800 ℃烧结后合成的LiNi_0.85Co_0.15O₂晶胞参数a＝0.2866 nm, c＝1.4193 nm及晶胞体积V＝0.1010 nm³, 以0.1 C倍率在3.0～4.3 V (vs. Li^＋/Li)放电时, 首次放电容量可以达到198.2 mAh/g, 20次循环后, 其放电容量仍在174 mAh/g以上.     

Synthesis and Characterization of Sol-Gel Cu-ZrO2 and Fe-ZrO2 Catalysts

Fe-ZrO₂ and Cu-ZrO₂ xerogels were prepared by a sol-gel method. The effect of the hydrolysis catalyst during the gelation step, namely H₂SO₄ or NH₄OH, on the properties of the resulting materials was investigated by XRD, BET, TGA/DTA, TPD of ammonia, FTIR, and TPR. Fe-ZrO₂ and Cu-ZrO₂ xerogels, with sulfuric acid introduced as the hydrolysis catalyst, mainly crystallyzed in the tetragonal phase and exhibited larger surface area and acid amount than those obtained with NH₄OH. Ammonia TPD shows that copper promoted sulfated zirconia is the most acidic material. TGA and FTIR reveal that under oxidizing conditions sulfated zirconia promoted with iron and copper retains more sulfate species than unpromoted sulfated zirconia. Regardless of the hydrolysis catalyst employed, copper promoted catalysts calcined at 600°C, contain a large fraction of copper oxide specieseasily reduced at low temperatures. These copper oxide species are believed to have different environment and interactions with the surface oxygen vacancies of the zirconia support. A FeO-like phase appears to be the most probable one after reduction of Fe-ZrO₂ catalysts prepared with NH₄OH as the hydrolysis catalyst. The formation of Fe° species may be hindered by the high dispersion and interaction of Fe²⁺ ions with the zirconia support. On the other hand, the reduction peaks of iron oxide and sulfate species exhibit a considerable overlap in the TPR profiles of sulfated Fe-ZrO₂ samples. Hence, the nature of the supported phase in the latter samples is rather uncertain.