Co oxidation with oxygen in the presence of hydrogen on CoO/CeO<Subscript>2</Subscript> and CuO/CoO/CeO<Subscript>2</Subscript> catalysts

The catalytic activity of the CoO/CeO₂ and CuO/CoO/CeO₂ systems in selective CO oxidation in the presence of hydrogen at 20–450°C ([CuO] = 1.0–2.5%, [CoO] = 1.0–7.0%) is reported. The maximum CO conversion (X) decreases in the following order: CuO/CoO/CeO₂ (X = 98–99%, T = 140–170°C) > CoO/CeO₂ (X = 67–84%, T = 230–240°C) > CeO₂ (X = 34%, T = 350°C). TPD, TPR, and EPR experiments have demonstrated that the high activity of CuO/CoO/CeO₂ is due to the strong interaction of the supported copper and cobalt oxides with cerium dioxide, which yields Cu-Co-Ce-O clusters on the surface. The carbonyl group in the complexes Co^δ+-CO and Cu⁺-CO is oxidized by oxygen of the Cu-Co-Ce-O clusters at 140–160°C and by oxygen of the Co-Ce-O clusters at 240°C. The decrease in the activity of the catalysts at high temperatures is due to the fact that hydrogen reduces the clusters on which CO oxidation takes place, yielding Co⁰ and Cu⁰ particles, which are inactive in CO oxidation. The hydrogenation of CO into methane at high temperatures is due to the appearance of Co⁰ particles in the catalysts.     

Effect of the nanoparticle size of supported copper-containing catalysts on their activity in the selective oxidation of CO in an excess of H<Subscript>2</Subscript>

The catalytic properties of systems prepared by the supporting of CuO onto CeO₂, ZrO₂, and Zr_0.5Ce_0.5O₂ with particle sizes of 15–25 nm (nitrate pyrolysis (p)) and 5–6 nm (microemulsion method (me)) in the reaction of CO oxidation in an excess of H₂ were studied. In the latter case, the supports had an almost homogeneous surface and a small number of defects. The catalytic activity of (me) and (p) supports was low and almost the same, whereas the catalytic activity of CuO/(CeO₂, ZrO₂, and Zr_0.5Ce_0.5O₂)(me) samples was lower than that of CuO/(CeO₂ and ZrO₂)(p). The maximum CO conversion (∼100% at 125°C) was observed on 5% CuO/CeO₂ (p). The CO and CO₂ adsorption species on (p) and (me) catalysts were studied by TPD. Differences in the compositions of copper-containing centers on the surfaces of (p) and (me) systems were found using TPR. The nature of the active centers of CO oxidation and the effect of support crystallite size on the catalytic activity were considered.     

The Effect of the Copper Oxide Content and Support Structure in (0.5−15%)СuО/ZrO<Subscript>2</Subscript> Catalysts on Their Activity in the CO Oxidation Reaction with Oxygen in an Excess of Hydrogen

The dependence of the activity of СuO/ZrO₂ catalysts in the CO oxidation reaction with oxygen in the presence of an excess of hydrogen and adsorption of СО over them on the CuO content (0.5 to 15%) and the structure of the support ZrO₂, monoclinic (М), tetragonal (Т), or mixed (М + Т) has been studied. It has been found that the activity of CuO/ZrO₂ is associated with the adsorption capacity of the samples for СО at 20°С. Thus, 5%CuO/ZrO₂(Т + М) and 5% CuO/ZrO₂(Т) samples, which exhibit the maximum activity (the СО conversion over them is 80–85% at 160°С), also possess a high chemisorption capacity towards CO (~2.2 × 10²⁰ molecules/g). At the same time, CuO/ZrO₂(М) samples with the CuO contents of 1 and 5% do not chemisorb СО and are inactive in the reaction at 160°С. The СО conversion over them does not exceed 32–36% at 250°С. On the basis of the data obtained by X-ray phase analysis, temperature-programmed reduction with Н₂, temperature-programmed СО desorption, and electron paramagnetic resonance, a conclusion has been made that at low temperatures СО oxidation proceeds over Cu_nO_m clusters that are located on ZrO₂(Т) crystallites. With the increase in the copper oxide content from 0.5 to 5%, the activity of the clusters increases, while the reaction temperature decreases. CuO_m oxo complexes and particles of the СuO phase do not exhibit catalytic activity. The reasons for the low activity of the CuO/ZrO₂(М) samples with the CuO contents of 1 and 5% in the СО oxidation and adsorption processes are discussed. The mechanism of the low-temperature СО oxidation with oxygen in an excess of hydrogen over a 5% CuO/ZrO₂(Т + М) catalyst is considered.     

Selective oxidation of CO in the presence of hydrogen on CuO/CeO<Subscript>2</Subscript> catalysts modified with Fe and Ni oxides

The selective oxidation of CO in the presence of hydrogen on CuO/CeO₂ systems containing Fe and Ni oxides as promoters was studied. The catalysts containing 1–5 wt % CuO and 1–2.5 wt % Fe₂O₃ supported on CeO₂ and the CuO/CeO₂ systems containing 1–2.5 wt % NiO were synthesized, and their catalytic activity as a function of temperature was determined. It was found that the additives of Fe and Ni oxides increased the activity of the CuO/CeO₂ catalysts with a low concentration of CuO. In this case, the conversion of CO at 150°C approached 100%. At the same time, these additives had no effect on the activity of the CuO/CeO₂ systems at a CuO concentration of 5 wt % or higher, which exhibited an initially high activity in the above temperature region. The forms of CO adsorption and the amounts of active sites for CO adsorption and oxidation were studied using temperature-programmed desorption. It was found that the introduction of Fe and Ni additives in a certain preparation procedure facilitated the formation of an additional amount of active centers associated with CuO. Data on the temperature-programmed reduction of samples (the amount of absorbed hydrogen and the maximum temperature of hydrogen absorption) suggested the interaction of all catalyst components, and the magnitude of this interaction depended on the sample preparation procedure. With the use of Mössbauer spectroscopy, it was found that the procedure of iron oxide introduction into the CuO/CeO₂ system was responsible for the electron-ion interactions of catalyst components and the reaction mixture.     

Mechanism of CO oxidation in excess H2 over CuO/CeO2 catalysts: ESR and TPD studies

The oxidation of CO with oxygen over (0.25–6.4)% CuO/CeO₂ catalysts in excess H₂ is studied. CO conversion increases and the temperature range of the reaction decreases by 100 K as the CuO content is raised. The maximal CO conversion, 98.5%, is achieved on 6.4% CuO/CeO₂ at 150°C. At T > 150°C, the CO conversion decreases as a result of the deactivation of part of the active sites because of the dissociative adsorption of hydrogen. CO is efficiently adsorbed on the oxidized catalyst to form CO-Cu⁺ carbonyls on Cu₂O clusters and is oxidized by the oxygen of these clusters, whereas it is neither adsorbed nor oxidized on Cu⁰ of the reduced catalysts. The activity of the catalysts is recovered after the dissociative adsorption of O₂ on Cu⁰ at T ～ 150°C. The activation energies of CO, CO₂, and H₂O desorption are estimated, and the activation energy of CO adsorption yielding CO-Cu⁺ carbonyls is calculated in the framework of the Langmuir-Hinshelwood model.     

Ligand-Protected Ultrasmall Pd Nanoclusters Supported on Metal Oxide Surfaces for CO Oxidation: Does the Ligand Activate or Passivate the Pd Nanocatalyst?

Herein, we report on the synthesis of ultrasmall Pd nanoclusters (∼2 nm) protected by L-cysteine [HOCOCH(NH₂)CH₂SH] ligands (Pd_n(L-Cys)_m) and supported on the surfaces of CeO₂, TiO₂, Fe₃O₄, and ZnO nanoparticles for CO catalytic oxidation. The Pd_n(L-Cys)_m nanoclusters supported on the reducible metal oxides CeO₂, TiO₂ and Fe₃O₄ exhibit a remarkable catalytic activity towards CO oxidation, significantly higher than the reported Pd nanoparticle catalysts. The high catalytic activity of the ligand-protected clusters Pd_n(L-Cys)_m is observed on the three reducible oxides where 100 % CO conversion occurs at 93–110 °C. The high activity is attributed to the ligand-protected Pd nanoclusters where the L-cysteine ligands aid in achieving monodispersity of the Pd clusters by limiting the cluster size to the active sub-2-nm region and decreasing the tendency of the clusters for agglomeration. In the case of the ceria support, a complete removal of the L-cysteine ligands results in connected agglomerated Pd clusters which are less reactive than the ligand-protected clusters. However, for the TiO₂ and Fe₃O₄ supports, complete removal of the ligands from the Pd_n(L-Cys)_m clusters leads to a slight decrease in activity where the T_100% CO conversion occurs at 99 °C and 107 °C, respectively. The high porosity of the TiO₂ and Fe₃O₄ supports appears to aid in efficient encapsulation of the bare Pd_n nanoclusters within the mesoporous pores of the support.     

Methanol conversion over CuO supported on CeO<Subscript>2</Subscript>-ZrO<Subscript>2</Subscript>: An in situ IR spectroscopic study

The main reactions yielding hydrogen are the recombination of hydrogen atoms on copper clusters and methyl formate decomposition. Methyl formate results from the interaction between the linear methoxy group and the formate complex located on CuO. The source of CO₂ appearing in the gas phase is the formate complex, and the source of CO is methyl formate. The rates of methoxy group conversion and product formation over supports (ZrO₂, CeO₂, Ce_0.8Zr_0.2O₂) and copper-containing catalysts (5%Cu/CeO₂, 5%Cu/ZrO₂, 2%Cu/Ce_0.8Zr_0.2O₂, 2%Cu/Ce_0.1Y_0.1Zr_0.8) are compared. The dominant process in methoxy group conversion over the supports and copper-containing catalysts is methanol decomposition to H₂ and CO and to H₂ and CO₂, respectively. The methoxy group conversion rate is proportional to the H₂ and CO₂ formation rate and is determined by the concentration of supported copper.     

Study of CuZnMOx oxides (M = Al,Zr, Ce,CeZr) for the catalytic hydrogenation of CO2 into methanol

CuO–ZnO–Al₂O₃ catalysts were synthesized by two methods, sol–gel and co-precipitation syntheses. Al₂O₃ was then substituted with other supports, such as ZrO₂, CeO₂ and CeO₂–ZrO₂ in order to have a better understanding of the support's effect. These catalysts containing 30 wt% of Cu were then tested for CO₂ hydrogenation into methanol. The effect of reaction temperature and GHSV on the catalytic behaviour was also investigated. The best results were obtained with a 30 CuO–ZnO–ZrO₂ catalyst synthesized by co-precipitation and calcined at 400 °C. This catalyst presents a good CO₂ conversion rate (23%) with 33% of methanol selectivity, leading to a methanol productivity of 331 g_MeOH.kg_cata⁻¹·h⁻¹ at 280 °C under 50 bar and a GHSV of 10,000 h⁻¹.     

铜物种对Cu/Fe2O3水煤气变换反应催化剂性能的影响

采用共沉淀法制备了系列铜负载量不同的Cu/Fe₂O₃水煤气变换(WGS)催化剂,并考察了铜负载量对催化剂结构和水煤气变换反应性能的影响. 结果表明,Cu/Fe₂O₃催化剂呈现出良好的水煤气反应性能,当CuO质量分数为20%时,催化剂的WGS性能最优,250 ℃时CO转化率高达97.2%,同时热稳定性也最好. 运用X射线粉末衍射(XRD)、N₂物理吸脱附和H₂程序升温还原(H₂-TPR)等手段对Cu/Fe₂O₃催化剂的物相、织构特征及还原性能进行了表征,结果表明,CuFe₂O₄物种的存在极大地改善了催化剂的还原性能和WGS反应活性. 这是由于CuFe₂O₄特殊的尖晶石结构有利于Cu微晶的稳定;同时,CuFe₂O₄在低温下即被还原为单质铜,有利于促进催化剂体系中电子的转移. 此外,通过(NH₄)₂CO₃溶液处理,研究了独立相CuO对Cu/Fe₂O₃催化剂WGS反应性能的影响,结果发现,独立相CuO的存在,有利于H原子在各组分传递,从而促进催化剂的CuFe₂O₄的还原,改善Cu/Fe₂O₃催化剂的WGS反应性能.     

Preferential oxidation of CO in excess H2 over the CeO2/CuO catalyst: Effect of initial support

Three series of CeO2/CuO samples were prepared by impregnation method and characterized by XRD, N2adsorption-desorption, temperatureprogrammed reduction(TPR), XPS and TEM techniques. In comparison with the samples prepared with CuO as initial support, the samples with Cu(OH)2as initial support have higher reducibilities and smaller relative TPR peak areas, and also larger specific surface areas at calcination temperatures of 400℃–600℃. As a result, Cu(OH)2is better than CuO as initial support for preferential oxidation of CO in excess H2(CO-PROX). The best catalytic performance was achieved on the sample calcined at 600℃ and with an atomic ratio of Ce/Cu at 40%. XPS analyses indicate that more interface linkages Ce-O-Cu could be formed when it was calcined at 600℃. And the atomic ratio of Ce/Cu at 40%led to a proper reducibility for the sample as illustrated by the TPR measurements.     

Preparation,Characterization, and Catalytic Behavior of Nanostructured Mesoporous CuO/ZrO2 Catalysts for Low-Temperature CO Oxidation

High-surface area mesoporous 20 mol% CuO/ZrO₂ catalyst was prepared by a surfactant-assisted method of nanocrystalline particle assembly, and characterized by x-ray powder diffraction (XRD), N₂ adsorption, transmission electron microscopy (TEM), H₂-TPR, TG-DTA, and x-ray photoelectron spectra (XPS) techniques. The catalytic properties of the CuO/ZrO₂ nanocatalysts calcined at different temperature were evaluated by low-temperature carbon monoxide oxidation using a CATLAB system. The results showed that these mesoporous nanostructured CuO/ZrO₂ catalysts were very active for low-temperature CO oxidation and the CuO/ZrO₂ catalyst calcined at 400°C exhibited the highest catalytic activity.     

Platinum-Supported Zirconia Nanotube Arrays Supported on Graphene Aerogels Modified with Metal–Organic Frameworks: Adsorption and Oxidation of Formaldehyde at Room Temperature

Precious-metal catalysts (e.g., Au, Rh, Ag, Ru, Pt, and Pd) supported on transition-metal oxides (e.g., Al₂O₃, Fe₂O₃, CeO₂, ZrO₂, Co₃O₄, MnO₂, TiO₂, and NiO) can effectively oxidize volatile organic compounds. In this study, porous platinum-supported zirconia materials have been prepared by a “surface-casting” method. The synthesized catalysts present an ordered nanotube structure and exhibited excellent performance toward the catalytic oxidation of formaldehyde. A facile method, utilizing a boiling water bath, was used to fabricate graphene aerogel (GA), and the macroscopic 3D Pt/ZrO₂-GA was modified by introducing an adjustable MOF coating by a surface step-by-step method. The unblocked mesoporous structure of the graphene aerogel facilitates the ingress and egress of reactants and product molecules. The selected 7 wt.% Pt/ZrO₂-GA-MOF-5 composite demonstrated excellent performance for HCHO adsorption. Additionally, this catalyst achieved around 90 % conversion when subjected to a reaction temperature of 70 °C (T_{90 %}=70 °C). The Pt/ZrO₂-GA-MOF-5 composite induces a catalytic cycle, increasing the conversion by simultaneously adsorbing and oxidizing HCHO. This work provides a simple approach to increasing reactant concentration on the catalyst to increase the rate of reaction.     

Effect of the ZrO2 Pore Structure on the Reduction of a Supported Cobalt Oxide in Catalysts for Fischer–Tropsch Synthesis

Processes occurring in the preparation of the Co/ZrO₂ + 6% Y₂O₃ catalyst are studied by temperature-programmed reduction (TPR). The effects of the concentration of Co, the porosity of the support, and the calcination temperature on catalyst reduction were studied. As was shown by continuous magnetization measurements in the course of TPR, metallic cobalt appeared on the microporous support in two temperature ranges irrespective of the precalcination temperature and the concentration of supported cobalt. These factors affect the reduction rate but do not change the maximum temperatures of the corresponding peaks. It is suggested that the first maximum of the Co formation rate is due to the reduction of CoO particles on the surface of the support and within macropores, whereas the second maximum is due to the reduction of CoO particles located within support micropores. Only one temperature range of CoO reduction was found in the macroporous ZrO₂ + 6% Y₂O₃. This effect is likely due to mass transfer in support micropores.     

Effect of gamma-irradiation on surface and catalytic properties of nanocrystalline CuO,NiO and Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> supported on alumina

The effect of γ-irradiation on surface and catalytic properties of CuO/Al₂O₃, NiO/Al₂O₃ and Fe₂O₃/Al₂O₃ was investigated. The techniques employed were XRD, nitrogen adsorption at −196 °C and catalytic conversion of ethanol and isopropanol at 250–400 °C using micropulse technique. The results showed that the supported solids being calcined at 400 °C consisted of well crystallized CuO, NiO, Fe₂O₃ and AlOOH phases. The AlOOH crystallized into a poorly crystalline γ-Al₂O₃ upon heating at 600 °C. All phases present in different solids calcined at 400 and 600 °C showed that these solids are of nanocrystalline nature measuring an average crystallite size between 6 and 85 nm. The crystallite size of crystalline phases present was found to be much affected by the dose of γ-rays and the nature of the metal oxide. This treatment resulted in a progressive increase in the specific surface area reaching to a maximum limit at a dose of 0.8 MGy. The dose of 1.6 MGy exerted a measurable decrease in the S _BET. A radiation dose of 0.2 to 0.8 MGy brought about a progressive significant decrease in the catalytic activity of all the catalytic systems investigated. All the catalytic systems retained their high activity upon exposure to a dose of 1.6 MGy. The rise in precalcination temperature of the systems investigated from 400 to 600 °C brought about a measurable increase in their catalytic activity in the conversion of alcohols.     

CO Selective Oxidation in Hydrogen-Rich Gas over Copper-Series Catalysts

The performances of CO selective oxidation in hydrogen-rich gas over four catalytic systems of CuO/ZrO2, CuO/MnO2, CuO/CoO and CuO/CeO2 were compared. The reducibility of these catalysts and the effect of CuO and CeO2 molar ratio of CuO/CeO2 catalysts on the activity of selective CO oxidation are investigated by XRD and TPR methods. The results show that the catalysts with the exception of CuO/ZrO2 have the interactions between CuO and CoO, CeO2 or MnO2, which result in a decrease in the reduction temperature. Among the catalysts studied, CuO/ZrO2 catalyst shows the lowest catalytic activity while CuO/CeO2 catalyst exhibits the best catalytic performance. The CuO(10%)/CeO2 catalyst attains the highest CO conversion and selectivity at 140 and 160℃. The addition of 9% H2O in the reactant feed decreases the activity of CuO/CeO2 catalyst but increases its CO selectivity.     

Mechanism of methanol conversion on ZrO<Subscript>2</Subscript> and 5% Cu/ZrO<Subscript>2</Subscript> according to in situ IR spectroscopic data

It is demonstrated by in situ IR spectroscopy that, in methanol conversion on ZrO₂ and 5% Cu/ZrO₂ catalysts, methoxy groups are present on the catalyst surface, which result from O-H or C-O bond breaking in the methanol molecule. Two types of formate complexes, localized on ZrO₂ and CuO, are also observed. The formate complexes form via the oxidative conversion of the methoxy groups. There are two types of linear methoxy groups. First-type linear methoxy groups condense with the formate complex located on CuO to yield methyl formate and then CO and H₂. Second-type methoxy groups appear as intermediate products in the formation of dimethyl ether. The main hydrogen formation reactions are the recombination of hydrogen atoms (which result from the interconversion of surface complexes) on copper clusters and the decomposition of methyl formate. The source of CO₂ in the gas phase is the formate complex, and the source of CO is methyl formate. The effect of water vapor and oxygen the surface reactions and product formation is discussed.     

Fe2O3含量对Cu-Fe/铝土矿水煤气变换催化剂结构和性能的影响

利用具有高比表面积和介孔结构的改性铝土矿为载体,采用并流共沉淀法制备不同Fe2O3含量的Cu-Fe/铝土矿催化剂。以水煤气变换反应为探针反应,考察了催化剂性能。利用X射线荧光元素分析(XRF)、X射线粉末衍射(XRD)、H2程序升温还原(H2-TPR)、CO程序升温脱附(CO-TPD)和X射线光电子能谱(XPS)等对催化剂进行了表征。结果表明:负载的Fe2O3能显著提高CuO/改性铝土矿催化剂的水煤气变换活性特别是热稳定性能,且随负载的Fe2O3含量增加而提高,当负载量为20%时达到最佳。其原因是负载的Fe2O3和CuO之间发生了相互作用,形成了类似于CuFe2O4复合氧化物,且随负载的Fe2O3含量的增加而增强,这种相互作用同时促进了CuO和Fe2O3的还原,抑制了CuO的烧结,进而提高了催化剂的性能。     

Fe2O3含量对Cu-Fe/铝土矿水煤气变换催化剂结构和性能的影响

利用具有高比表面积和介孔结构的改性铝土矿为载体,采用并流共沉淀法制备不同Fe₂O₃含量的Cu-Fe/铝土矿催化剂。以水煤气变换反应为探针反应,考察了催化剂性能。利用X射线荧光元素分析(XRF)、X射线粉末衍射(XRD)、H₂程序升温还原(H₂-TPR)、CO程序升温脱附(CO-TPD)和X射线光电子能谱(XPS)等对催化剂进行了表征。结果表明:负载的Fe₂O₃能显著提高CuO/改性铝土矿催化剂的水煤气变换活性特别是热稳定性能,且随负载的Fe₂O₃含量增加而提高,当负载量为20%时达到最佳。其原因是负载的Fe₂O₃和CuO之间发生了相互作用,形成了类似于CuFe₂O₄复合氧化物,且随负载的Fe₂O₃含量的增加而增强,这种相互作用同时促进了CuO和Fe₂O₃的还原,抑制了CuO的烧结,进而提高了催化剂的性能。     

Dehydrogenation of piperazine to pyrazine on oxide surfaces under chromatographic conditions

The conversion of piperazine under pulse-chromatographic conditions on catalysts — anhydrides of polyvalent acids and metal oxides of variable valence (P₂O₅, Cr₂O₃, MoO₃, WO₃, CuO, CoO, NiO, MoO₃ + P₂O₅ andWO₃ + B₂O₃ + CoO) —applied on Chromsorb W was investigated. The principal reaction direction in all cases is dehydrogenation of piperazine to pyrazine (90–94% yields). The most selective catalyst is CuO. The dehydrogenation is accompanied by slight hydrogenolysis to give ethylamine, diethylamine, methylpyrazine, and N-ethylpiperazine. The conversion of piperazine to P₂O₅ is characterized by the lowest activation energy on metal oxides.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1414–1419, October, 1974.     

Selective oxidation of CO in excess hydrogen on copper—cerium-containing catalysts

Selective oxidation of CO that is in mixtures enriched in H₂ was studied to investigate catalytic properties of the 0.5—80% CuO/Ce_0.7Zr_0.3O₂ system. The catalysts were prepared by the combined decomposition of copper, cerium, and zirconyl nitrates at 300 °C. The systems studied are active and stable under mild conditions of the process (80—160 °C) and at high space velocities (to 100000 h^–1) of the reaction mixture (2% CO, 1% O₂, 40—50% H₂). With an increase in the CuO content in the catalysts up to 20%, the degree of CO removal achieves 60% (120 °C and V = 35000 h^–1) and further does not change appreciably. The contribution of oxygen participation into CO oxidation is virtually independent of the copper concentration in the sample and ranges from 65 to 75%. The dependences of the Arrhenius equation parameters for CO and H₂ oxidation on the catalyst composition were determined, which makes it possible to calculate the conversion of reactants and selectivity of CO conversion under the specified conditions of the process. The addition of CO₂ and H₂O (12—15%) to the reaction mixture decreases the catalyst activity and simultaneously increases the selectivity of CO oxidation to 100%. It is shown by the TPR and X-ray diffraction methods that the combined decomposition of the starting Cu²⁺, Ce³⁺, and ZrO²⁺ nitrates produces solid solutions of oxides with a high content of CuO. The reductive pre-treatment of fresh samples of the studied catalysts results in the destruction of the solid solution and formation of highly dispersed Cu particles on the surface of Ce—Zr—O. These particles are active in CO oxidation.