Carbon nanotube-enhanced electrochemical DNA biosensor for DNA hybridization detection

A novel and sensitive electrochemical DNA biosensor based on multi-walled carbon nanotubes functionalized with a carboxylic acid group (MWNTs-COOH) for covalent DNA immobilization and enhanced hybridization detection is described. The MWNTs-COOH-modified glassy carbon electrode (GCE) was fabricated and oligonucleotides with the 5'-amino group were covalently bonded to the carboxyl group of carbon nanotubes. The hybridization reaction on the electrode was monitored by differential pulse voltammetry (DPV) analysis using an electroactive intercalator daunomycin as an indicator. Compared with previous DNA sensors with oligonucleotides directly incorporated on carbon electrodes, this carbon nanotube-based assay with its large surface area and good charge-transport characteristics dramatically increased DNA attachment quantity and complementary DNA detection sensitivity. This is the first application of carbon nanotubes to the fabrication of an electrochemical DNA biosensor with a favorable performance for the rapid detection of specific hybridization.     

Cadmium sulfide nanocluster-based electrochemical stripping detection of DNA hybridization

A novel, sensitive electrochemical DNA hybridization detection assay, using cadmium sulfide (CdS) nanoclusters as the oligonucleotide labeling tag, is described. The assay relies on the hybridization of the target DNA with the CdS nanocluster oligonucleotide DNA probe, followed by the dissolution of the CdS nanoclusters anchored on the hybrids and the indirect determination of the dissolved cadmium ions by sensitive anodic stripping voltammetry (ASV) at a mercury-coated glassy carbon electrode (GCE). The results showed that only a complementary sequence could form a double-stranded dsDNA-CdS with the DNA probe and give an obvious electrochemical response. A three-base mismatch sequence and non-complementary sequence had negligible response. The combination of the large number of cadmium ions released from each dsDNA hybrid with the remarkable sensitivity of the electrochemical stripping analysis for cadmium at mercury-film GCE allows detection at levels as low as 0.2 pmol L(-1) of the complementary sequence of DNA.     

Magnetic bead-based label-free electrochemical detection of DNA hybridization.

Magnetic bead capture has been used for eliminating non-specific adsorption effects hampering label-free detection of DNA hybridization based on stripping potentiometric measurements of the target guanine at graphite electrodes. In particular, the efficient magnetic separation has been extremely useful for discriminating against unwanted constituents, including a large excess of co-existing mismatched and non-complementary oligomers, chromosomal DNA, RNA and proteins. The new protocol involves the attachment of biotinylated oligonucleotide probes onto streptavidin-coated magnetic beads, followed by the hybridization event, dissociation of the DNA hybrid from the beads, and potentiometric stripping measurements at a renewable graphite pencil electrode. Such coupling of magnetic hybridization surfaces with renewable graphite electrode transducers and label-free electrical detection results in a greatly simplified protocol and offers great promise for centralized and decentralized genetic testing. A new magnetic carbon-paste transducer, combining the solution-phase magnetic separation with an instantaneous magnetic collection of the bead-captured hybrid, is also described. The characterization, optimization and advantages of the genomagnetic label-free electrical protocol are illustrated below for assays of DNA sequences related to the breast-cancer BRCA1 gene.     

Label-free electrochemical detection of DNA hybridization on gold electrode

A label-free electrochemical detection protocol for DNA hybridization is reported for the first time by using a gold electrode (AuE). The oxidation signal of guanine was monitored at +0.73 V by using square wave voltammetry (SWV) on self-assembled l-cysteine monolayer (SAM) modified AuE. The electrochemical determination of hybridization between an inosine substituted capture probe and native target DNA was also accomplished. 6-mer adenine probe was covalently attached to SAM via its amino link at 5^′ end. Then, 6-mer thymine-tag of the capture probe was hybridized with the adenine probe, thus left the rest of the oligonucleotide available for hybridization with the target. The dependence of the guanine signal upon the concentration of the target was observed. Probe modified AuE was also challenged with non-complementary and mismatch containing oligonucletides. Label-free detection of hybridization on AuE is greatly advantageous over the existing carbon and mercury electrode materials, because of its potential applicability to microfabrication techniques. Performance characteristics of the genosensor are described, along with future prospects.     

Rapid DNA electrochemical biosensing platform for label-free potentiometric detection of DNA hybridization

This paper described a novel electrochemical DNA biosensor for rapid specific detection of nucleic acids based on the sulfonated polyaniline (SPAN) nanofibre and cysteamine-capped gold nanoparticle (CA-G_NP) layer-by-layer films. A precursor film of 3-mercaptopropionic acid (MPA) was firstly self-assembled on the Au electrode surface. CA-G_NP was covalently deposited on the Au/MPA electrode to obtain a stable substrate. SPAN nanofibre and CA-G_NP were alternately layer-by-layer assembled on the stable substrate by electrostatic force. Cyclic voltammetry was used to monitor the consecutive growth of the multilayer films by utilizing [Fe(CN)₆]^3−/4− as the redox indicator. The (CA-G_NP/SPAN)_n films showed satisfactory ability of electron transfer and excellent redox activity in neutral media. Negatively charged probe ssDNA was immobilized on the outer layer of the multilayer film (CA-G_NP) through electrostatic affinity. Chronopotentiometry and electrochemical impedance spectroscopy were employed to obtain the direct electrochemical readout for probe ssDNA immobilization and hybridization using [Fe(CN)₆]^3−/4− in solution as the mediator. While electrochemical impedance spectroscopy led to the characterization of the electron-transfer resistance at the electrode, chronopotentiometry provided the total resistance at the interfaces of the modified electrodes. A good correlation between the total electrode resistances and the electron-transfer resistances at the conducting supports was found. Chronopotentiometry was suggested as a rapid transduction means (a few seconds). Based on the (CA-G_NP/SPAN)_n films, the target DNA with 20-base could be detected up to 2.13 × 10⁻¹³ mol/L, and the feasibility for the detection of base-mismatched DNA was also demonstrated.     

Washing-free electrochemical DNA detection using double-stranded probes and competitive hybridization reaction

A new electrochemical DNA detection method using double-stranded probes and competitive hybridization reaction offers highly selective discrimination of single base mismatch without post-hybridization washing.     

Carbon-nanotube-modified glassy carbon electrodes for amplified label-free electrochemical detection of DNA hybridization

The preparation and attractive performance of carbon-nanotube modified glassy-carbon (CNT/GC) electrodes for improved detection of purines, nucleic acids, and DNA hybridization are described. The surface-confined multiwall carbon-nanotube (MWCNT) facilitates the adsorptive accumulation of the guanine nucleobase and greatly enhances its oxidation signal. The advantages of CNT/GC electrodes are illustrated from comparison to the common unmodified glassy carbon, carbon paste and graphite pencil electrodes. The dramatic amplification of the guanine signal has been combined with a label-free electrical detection of DNA hybridization. Factors influencing the enhancement of the guanine signal are assessed and optimized. The performance characteristics of the amplified label-free electrochemical detection of DNA hybridization are reported in connection to measurements of nucleic-acid segments related to the breast-cancer BRCA1 gene.     

Comparison between electrochemical and optoelectrochemical impedance measurements for detection of DNA hybridization

The principles of the electrochemical and optoelectrochemical impedance measurements on bare electrolyte/dielectric/semiconductor structures are described. The analysis of the experimental curves allows access to several indications concerning the electrical behavior of such structures. The application of these techniques to follow the electrical behavior of structures modified with two biological systems was investigated. The antibody/antigen recognition did not change the surface charge and, therefore, did not affect the impedance curves with respect to the applied potential. By contrast, the hybridization of two complementary DNA strands on the surface of the structure induced a variation of flat band potential of the semiconductor leading to a shift of impedance curves along the potential axis. This means that it is possible to detect directly the DNA hybridization without the use of labeled probes. The use of light allows the surface to be probed locally. In the future, the application of this technique for direct detection of hybridization on DNA chips should be possible.     

Genomagnetic electrochemical assays of DNA hybridization

An electrochemical genomagnetic hybridization assay has been developed to take advantage of a new and efficient magnetic separation/mixing process, the amplification feature of enzyme labels, and single-use thick-film carbon transducers operated in the pulse-voltammetric mode. It represents the first example of coupling a magnetic isolation with electrochemical detection of DNA hybridization. The new protocol employs an enzyme-linked sandwich solution hybridization, with a magnetic-particle labeled probe hybridizing to a biotinylated DNA target that captures a streptavidin-alkaline phosphatase (AP). The alpha-naphthol product of the enzymatic reaction is quantitated through its well-defined, low-potential (+0.1 V vs. Ag/AgCl) differential pulse-voltammetric peak at the disposable screen-printed electrode. The efficient magnetic isolation is particularly attractive for electrical detection of DNA hybridization which is commonly affected by the presence of non-hybridized nucleic acid adsorbates. The new biomagnetic processing combines such magnetic separation with a low-volume magnetic mixing, and allows simultaneous handling of 12 samples. The attractive bioanalytical behavior of the new enzyme-linked genomagnetic electrical assay is illustrated for the detection of DNA segments related to the breast-cancer BRCA1 gene.     

An electrochemical DNA hybridization detection assay based on a silver nanoparticle label

A novel, sensitive electrochemical DNA hybridization detection assay, using silver nanoparticles as the oligonucleotide labeling tag, is described. The assay relies on the hybridization of the target DNA with the silver nanoparticle-oligonucleotide DNA probe, followed by the release of the silver metal atoms anchored on the hybrids by oxidative metal dissolution and the indirect determination of the solubilized Ag(I) ions by anodic stripping voltammetry (ASV) at a carbon fiber ultramicroelectrode. The influence of the relevant experimental variables, including the surface coverage of the target oligonucleotide, the duration of the silver dissolution steps and the parameters of the electrochemical stripping measurement of the silver(I) ions, is examined and optimized. The combination of the remarkable sensitivity of the stripping metal analysis at the microelectrode with the large number of silver(I) ions released from each DNA hybrid allows detection at levels as low as 0.5 pmol L(-1) of the target oligonucleotides.     

Particle-based detection of DNA hybridization using electrochemical stripping measurements of an iron tracer

Two particle-based procedures for monitoring DNA hybridization based on electrochemical stripping detection of an iron tracer are described. The first protocol involves probes labeled with gold-coated iron core-shell nanoparticles, while the second route relies on detecting the iron content of magnetic-sphere tags. In both cases, the captured iron-containing particles are dissolved following the hybridization, and the released iron is quantified by cathodic-stripping voltammetry in the presence of the 1-nitroso-2-naphthol ligand and a bromate catalyst. Both protocols offer high sensitivity, a well-defined concentration dependence, and minimal contributions from non-complementary nucleic acids. The iron-containing particle signal amplifiers thus represent a very useful addition to the arsenal of metal tracers employed in electrical bioassays.     

Chemical control of electrode functionalization for detection of DNA hybridization by electrochemical impedance spectroscopy

We report sensitive label-free detection of DNA oligonucleotide sequences using ac impedance measurements. The surface attachment chemistry is critical, and using mixed self-assembled monolayers on a gold electrode results in much better performance than homogeneous self-assembled monolayers. Contrary to expectations, binding of the target sequence reduces rather than increases the charge transfer resistance. Similar behavior is observed on indium tin oxide electrodes, and we ascribe it to the hydrophilicity and rigidity of the DNA duplex that cause it to reside further from the electrode surface and facilitate the approach of negatively charged redox moieties to the interface.     

Improved electrochemical performances of polyaniline nanotubes-poly-L-lysine composite for label-free impedance detection of DNA hybridization

A sensitive label-free DNA hybridization biosensing platform was fabricated based on the synergistic effect of polyaniline nanotubes (PANI_nt) and poly-L-lysine (pLys). The composite of pLys and PANI_nt was coated onto the carbon paste electrode (CPE) to form a uniform and very stable nanocomposite membrane. The pLys in the composite film not only acts as a membrane to retain good electron transfer capability of PANI_nt even at physiological pH, but also possesses fine biocompatibility for bio-analytes. DNA probes with negatively charged phosphate groups were readily linked to the positively charged pLys surface due to the strong electrostatic affinity. The synergistic effect of PANI_nt and pLys could significantly enhance the sensitivity of DNA hybridization recognition. The phosphinothricin acetyltransferase (PAT) gene fragment from transgenic corn and the polymerase chain reaction amplification of the terminator of nopaline synthase gene from the real sample of a kind of transgenic soybean were detected by this DNA electrochemical biosensor via label-free impedance method. This stable composite gives convenient permselectivity properties as a transducer material for the design of modern electrochemical impedance biosensor using [Fe(CN)₆]^3?/4? as an indicator.     

Nanoparticle-based electrochemical DNA detection

Nanoscale architectures of DNA-linked particle networks are attractive for electrical detection of DNA hybridization. This article reviews a variety of new nanoparticle/polynucleotide assemblies for advanced electrical detection of DNA sequences. Recent activity has led to innovative and powerful nanoparticle-based electrochemical DNA hybridization assays based on a variety of detection schemes. Such protocols rely on the use of colloidal gold tags, semiconductor quantum dot tracers, polymeric carrier (amplification) beads, or magnetic (separation) beads. Particularly useful have been protocols based on capturing of metal nanoparticle tracers followed by dissolution and anodic-stripping voltammetric measurement of the metal tag. Remarkable sensitivity is achieved by coupling particle-based amplification units and various amplification processes. The use of nanoparticle tracers for designing multi-target electrochemical coding protocols will also be documented.     

Screen-printed electrochemical hybridization biosensor for the detection of DNA sequences from the Escherichia coli pathogen

An electrochemical biosensor for the specific detection of short DNA sequences from the E. coli pathogen is described. This hybridization device relies on the immobilization of a 25-mer oligonucleotide probe, from the E. coli lacZ gene, onto a screen-printed carbon electrode. Chronopotentiometric detection of the Co(bpy)₃⁺³ indicator is used for monitoring the hybridization event. Numerous variables of the assay protocol, including those of the probe immobilization step, the hybridization event, and the indicator association/detection, are characterized and optimized. Hybridization times of 2- and 30-min are sufficient for detecting 300- and 50 ng/mL, respectively, of the E. coli DNA target. Applicability to analysis of untreated environmental water samples is illustrated. Such single-use electrochemical sensors hold great promise for decentralized environmental and food testing for the E. coli pathogen.     

Dual enzyme electrochemical coding for detecting DNA hybridization

Enzyme-based hybridization assays for the simultaneous electrochemical measurements of two DNA targets are described. Two encoding enzymes, alkaline phosphatase and beta-galactosidase, are used to differentiate the signals of two DNA targets in connection to chronopotentiometric measurements of their electroactive phenol and alpha-naphthol products. These products yield well-defined and resolved peaks at +0.31 V (alpha-naphthol) and +0.63 V (phenol) at the graphite working electrode (vs. Ag/AgCl reference). The position and size of these peaks reflect the identity and level of the corresponding target. The dual target detection capability is coupled to the amplification feature of enzyme tags (to yield fmol detection limits) and with an efficient magnetic removal of non-hybridized nucleic acids. Proper attention is given to the choice of the substrates (for attaining well resolved peaks), to the activity of the enzymes (for obtaining similar sensitivities), and to the selection of the enzymes (for minimizing cross interferences). The new bioassay is illustrated for the simultaneous detection of two DNA sequences related to the BCRA1 breast-cancer gene in a single sample in connection to magnetic beads bearing the corresponding oligonucleotide probes. Prospects for electrochemical coding of multiple DNA targets are discussed.     

DNA hybridization electrochemical biosensor using a functionalized polythiophene

A simple and label-free electrochemical sensor for recognition of the DNA sensor event was prepared by electrochemical polymerization of 4-hydroxyphenyl thiophene-3-carboxylate. Poly(4-hydroxyphenyl thiophene-3-carboxylate) (PHPT) was synthesized electrochemically onto glassy carbon electrode and characterized by cyclic voltammetry, FTIR and AFM measurements. An ODN-probe was physisorbed onto PHPT film and tested on hybridization with complementary ODN segments. A biological recognition can be monitored by comparison with electrochemical signal (cyclic voltammogram) of single and double strand state oligonucleotide. The oxidation current of double strand state oligonucleotide is lower than that of single strand, that is corresponding to the decrease of electroactivity of PHPT with the increase of stiffness of polymer structure. Physisorbed ODN-probe and its hybridization were observed morphologically onto ITO electrodes using AFM. The sensitivity of the electrochemical sensor is 0.02 μA/nmol, detection limit is 1.49 nmol and it has good selectivity.     

Kinetic study of DNA/DNA hybridization with electrochemical impedance spectroscopy

The hybridization of immobilized oligonucleotides probe strands with solution phase targets is the underlying principle of microarray-based techniques for the analysis of DNA variation. To study the kinetics of DNA/DNA hybridization, target DNA is often prior labeled with markers. A label-free method of electrochemical impedance spectra (EIS) for study the hybridization in process was reported. The Langmuir model was used to determine the association rate constant (K_on), the dissociation rate constant (K_off) and the affinity rate constant (K_A), for perfect matched DNA hybridization. The results show that, EIS is a successful technique possessing high effectivity and sensitivity to study DNA/DNA hybridization kinetics. This work can provide another view on EIS for the studying of DNA/DNA hybridization.     

Poly(indole-5-carboxylic acid)-functionalized ZnO nanocomposite for electrochemical DNA hybridization detection

Journal of Solid State Electrochemistry - In this paper, a novel direct DNA electrochemical biosensor was developed for detection of breakpoint cluster region gene and the cellular abl (BCR/ABL)...